May 2006 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon May 1 05:25:00 GMT 2006
Ending: Wed May 31 22:42:00 GMT 2006
Messages: 284

• [ECOS] Can you please verify#1fsAkl1apS8g50EZYBVUzpstVFiPpbGv   mark@mcselec.com
  • [ECOS] Can you please verify#1fsAkl1apS8g50EZYBVUzpstVFiPpbGv   Lars Poeschel
• [ECOS] cyg_thread_delay on ARM7 crashes randomly   Brett Delmage
  • [ECOS] cyg_thread_delay on ARM7 crashes randomly   Andrew Lunn
    • [ECOS] cyg_thread_delay on ARM7 crashes randomly   Brett Delmage
      • [ECOS] cyg_thread_delay on ARM7 crashes randomly   Nick Garnett
• [ECOS] printf or diag_printf prints $O48656c6c6f2c20776f726c64210a#75   Ram Sudhir Tadavarthi
• [ECOS] Re: ecos-discuss Digest 3 May 2006 14:26:26 -0000 Issue 2208   llandre
• [ECOS] Re: printf or diag_printf prints $O48656c6c6f2c20776f726c64210a#75   Ram Sudhir Tadavarthi
• [ECOS] Write to Data bus in MPC565   Praveen Prabhakar , Bangalore
  • [ECOS] Write to Data bus in MPC565   Rycerz Roman-G11565
    • [ECOS] MPC555 board hardware configuration   G.Muruganandam
• [ECOS] invalid conversion from void* to void**   robert sebestyen
  • [ECOS] invalid conversion from void* to void**   Andrew Lunn
    • [ECOS] invalid conversion from void* to void**   robert sebestyen
      • [ECOS] invalid conversion from void* to void**   Andrew Lunn
      • [ECOS] invalid conversion from void* to void**   robert sebestyen
      • [ECOS] invalid conversion from void* to void**   Andrew Lunn
      • [ECOS] invalid conversion from void* to void**   robert sebestyen
      • [ECOS] invalid conversion from void* to void**   Andrew Lunn
      • [ECOS] invalid conversion from void* to void**   robert sebestyen
      • [ECOS] invalid conversion from void* to void**   Andrew Lunn
      • [ECOS] eCos port on SPEAR-07-NC03   Evgeny Belyanco
      • [ECOS] eCos port on SPEAR-07-NC03   Andrew Lunn
• [ECOS] USB MSD stack   Doyle, Patrick
  • [ECOS] USB MSD stack   Stefan Sommerfeld
  • [ECOS] USB MSD stack   Andrew Lunn
  • [ECOS] USB MSD stack   Andrew Lunn
  • [ECOS] USB MSD stack   Doyle, Patrick
    • [ECOS] USB MSD stack   Andrew Lunn
  • [ECOS] USB MSD stack   Doyle, Patrick
  • [ECOS] USB MSD stack   Doyle, Patrick
    • [ECOS] USB MSD stack   Andrew Lunn
  • [ECOS] USB MSD stack   Doyle, Patrick
    • [ECOS] USB MSD stack   Andrew Lunn
  • [ECOS] USB MSD stack   Doyle, Patrick
    • [ECOS] USB MSD stack   Frank Pagliughi
• [ECOS] redboot with console baudrate 115200   Dirk Eibach
  • [ECOS] redboot with console baudrate 115200   Andrew Lunn
• [ECOS] ecos 2.0 GUI configtool   Marcin Chrusciel
  • [ECOS] ecos 2.0 GUI configtool   Andrew Lunn
• [ECOS] Re: ecos 2.0 GUI configtool   John Dallaway
• [ECOS] Ethernet driver (specifically SMSC 91Cxxx) questions...   Andy Jackson
• [ECOS] Real mode to protected mode:   Teli, Chris
• [ECOS] libsupc++.a   Marcin Chrusciel
  • [ECOS] libsupc++.a   Andrew Lunn
• [ECOS] eCos C/Tcl sources indent style   sg@belvok.com
• [ECOS] "Unrequested Response"- at91rm9200 porting   Henry Wong
• [ECOS] lwIP in a makefile   robert sebestyen
• [ECOS] Going to Isr & dsr even Interrupt has not occured   sumanth
• [ECOS] ecos and magnetic card reader   Ubhay
  • [ECOS] ecos and magnetic card reader   Alex Schuilenburg
• [ECOS] Re :Write to Data bus in MPC565   Praveen Prabhakar , Bangalore
• [ECOS] Change RAM wait state   Alluitz
  • [ECOS] Change RAM wait state   Andrew Lunn
    • [ECOS] Change RAM wait state   Alluitz
• [ECOS] Scheduler EDF in eCos   Birahim Larou Fall
• [ECOS] Cygwin and ecos   Emmanuel Viollet
  • [ECOS] Cygwin and ecos   Andrew Lunn
• [ECOS] CYGNUM_HAL_RTC_PERIOD help   Ram Sudhir Tadavarthi
  • [ECOS] CYGNUM_HAL_RTC_PERIOD help   Gary Thomas
• [ECOS] Re:CYGNUM_HAL_RTC_PERIOD help   Ram Sudhir Tadavarthi
  • [ECOS] Re:CYGNUM_HAL_RTC_PERIOD help   Andrew Lunn
• [ECOS] Ecosconfig and configtool   Emmanuel Viollet
  • [ECOS] Ecosconfig and configtool   Andrew Lunn
  • AW: [ECOS] Ecosconfig and configtool   Ram Sudhir Tadavarthi
    • AW: [ECOS] Ecosconfig and configtool   Emmanuel Viollet
      • AW: [ECOS] Ecosconfig and configtool   Andy Jackson
      • AW: [ECOS] Ecosconfig and configtool   Emmanuel Viollet
• [ECOS] Memory footprint   Emmanuel Viollet
  • [ECOS] Memory footprint   Andrew Lunn
    • [ECOS] Memory footprint   Emmanuel Viollet
      • [ECOS] Choice of Web Servers   Laurie Gellatly
      • [ECOS] Memory footprint   Andrew Lunn
      • [ECOS] Memory footprint   Emmanuel Viollet
      • [ECOS] Memory footprint   Andrew Lunn
      • [ECOS] Re: Memory footprint   Grant Edwards
      • [ECOS] Re: Memory footprint   Andrew Lunn
      • [ECOS] Re: Memory footprint   Gary Thomas
      • [ECOS] Re: Memory footprint   Grant Edwards
      • [ECOS] Re: Memory footprint   Grant Edwards
• [ECOS] printf   Emmanuel Viollet
  • AW: [ECOS] printf   Ram Sudhir Tadavarthi
  • [ECOS] printf   Andrew Lunn
• [ECOS] Output window in Config 2.net dissapeared - how to get back ?   Brett Delmage
  • [ECOS] Output window in Config 2.net dissapeared - how to get back ?   Andy Jackson
    • [ECOS] Output window in Config 2.net dissapeared - how to get back ?   Brett Delmage
• [ECOS] confitool problems with Cygwin   Moussa A. Ba
• [ECOS] Configtool problems with cygwin: NEVERMIND   Moussa A. Ba
• [ECOS] Compiling eCOS with IAR   Emmanuel Viollet
  • [ECOS] Compiling eCOS with IAR   Andrew Lunn
    • [ECOS] Compiling eCOS with IAR   Emmanuel Viollet
      • [ECOS] Re: Compiling eCOS with IAR   Grant Edwards
• [ECOS] Recommended Version of GCC   Moussa A. Ba
  • [ECOS] Recommended Version of GCC   Andrew Lunn
  • [ECOS] Recommended Version of GCC   Birahim Larou Fall
  • [ECOS] Recommended Version of GCC   Jay Foster
    • [ECOS] Two minor memory allocation issues   Andy Jackson
      • [ECOS] Two minor memory allocation issues   Andrew Lunn
• [ECOS] Serial port problem   Ubhay
  • [ECOS] Serial port problem   Andrew Lunn
    • [ECOS] Serial port problem   Ubhay
• [ECOS] fcntl error   aditya veer singh
  • [ECOS] fcntl error   Andrew Lunn
    • [ECOS] fcntl error   aditya veer singh
      • [ECOS] Re: fcntl error   Daniel Néri
• [ECOS] Problems building ecos sources   Frank Pagliughi
• [ECOS] Nonsynth! ecos to glibc linux Adaptor.   John Carter
• [ECOS] How to change MTU?   蔡述宪
  • [ECOS] How to change MTU?   Birahim Larou Fall
• [ECOS] Unable to link sysctl()   aditya veer singh
  • [ECOS] Unable to link sysctl()   Andrew Lunn
    • [ECOS] porting EDF in eCos   Birahim Larou Fall
• [ECOS] Failsafe Firmware Updates   Stewart Heitmann
  • [ECOS] Failsafe Firmware Updates   Tim michals
    • [ECOS] Failsafe Firmware Updates   Stewart Heitmann
  • [ECOS] Failsafe Firmware Updates   Andrew Lunn
    • [ECOS] Failsafe Firmware Updates   Stewart Heitmann
  • [ECOS] Failsafe Firmware Updates   Àlex Bueno Guarner
    • [ECOS] Failsafe Firmware Updates   Stewart Heitmann
  • [ECOS] Failsafe Firmware Updates   Doyle, Patrick
• [ECOS] eCos environment prolem(Thanks.)   joe_wu@seed.net.tw
• [ECOS] malloc1 test and posix stdio fails   Brett Delmage
  • [ECOS] malloc1 test and posix stdio fails   Andrew Lunn
    • [ECOS] malloc1 test and posix stdio fails   Brett Delmage
      • [ECOS] malloc1 test and posix stdio fails   Andrew Lunn
• [ECOS] FILE I/O for eCos PowerPC Simulator   Luis Friedrich
  • [ECOS] FILE I/O for eCos PowerPC Simulator   Andrew Lunn
• [ECOS] assigning NVRAM to variables   saurabh prakash
  • [ECOS] assigning NVRAM to variables   Hans Hübner
• [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Guillaume Aymard
  • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Andrew Lunn
    • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Guillaume Aymard
      • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Andrew Lunn
      • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Guillaume Aymard
      • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Robin Randhawa
      • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Guillaume Aymard
      • [ECOS] Specific location for kernel_mutex.o : linker file issue. Need help !   Andrew Lunn
• [ECOS] Error when changing 'fconfig' redboot values from a linux program   Calin Onofrei
  • [ECOS] Error when changing 'fconfig' redboot values from a linux program   thierry langlais
  • [ECOS] Error when changing 'fconfig' redboot values from a linux program   Calin Onofrei
    • [ECOS] Error when changing 'fconfig' redboot values from a linux program   Andrew Lunn
  • [ECOS] Error when changing 'fconfig' redboot values from a linux program   Calin Onofrei
  • [ECOS] Error when changing 'fconfig' redboot values from a linux program   Calin Onofrei
• [ECOS] redefinition of `cyg_uint32'   Juergen Lambrecht
  • [ECOS] redefinition of `cyg_uint32'   Andrew Lunn
    • [ECOS] error building ecos application for LEON   Agus Ariffianto
    • [ECOS] redefinition of `cyg_uint32'   Jürgen Lambrecht
      • [ECOS] redefinition of `cyg_uint32'   Andrew Lunn
      • [ECOS] redefinition of `cyg_uint32'   Jurgen Lambrecht
      • [ECOS] Patch for Re: [ECOS] redefinition of `cyg_uint32'   Juergen Lambrecht
      • [ECOS] Re: Patch for Re: [ECOS] redefinition of `cyg_uint32'   Andrew Lunn
• [ECOS] CS8900A w/ARM locking condition   Alfonso Amato - Sintecnos srl
  • [ECOS] CS8900A w/ARM locking condition   Deak, Ferenc
    • [ECOS] CS8900A w/ARM locking condition   Daniel Morris
      • [ECOS] CS8900A w/ARM locking condition   Deak, Ferenc
    • [ECOS] CS8900A w/ARM locking condition   Alfonso Amato - Sintecnos srl
• [ECOS] gdb problem   Ram Sudhir Tadavarthi
  • [ECOS] gdb problem   Andrew Lunn
    • AW: [ECOS] gdb problem   Ram Sudhir Tadavarthi
  • AW: [ECOS] gdb problem   Ram Sudhir Tadavarthi
• [ECOS] Let's make a difference   Dhana Sekar
  • [ECOS] Let's make a difference   Shekar
• [ECOS] ROM startup   Alluitz
  • [ECOS] ROM startup   Andrew Lunn
    • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Andrew Lunn
      • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Andrew Lunn
      • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Andrew Lunn
      • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Andrew Lunn
      • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Andrew Lunn
      • [ECOS] ROM startup   Alluitz
      • [ECOS] ROM startup   Ilija Koco
• [ECOS] Unable to get the real time clock intialized   aditya veer singh
• [ECOS] Reboot FIS updates   Rycerz Roman-G11565
  • [ECOS] Reboot FIS updates   Andrew Lunn
    • [ECOS] HTTPD woes   Laurie Gellatly
  • [ECOS] Reboot FIS updates   Rycerz Roman-G11565
• [ECOS] Red boot package   Marcin Chrusciel
  • [ECOS] Red boot package   Gary Thomas
  • [ECOS] Red boot package   Andrew Lunn
  • [ECOS] Red boot package   Andrew Lunn
    • [ECOS] Red boot package   Gary Thomas
• [ECOS] correct handling of condition variables from DSRs   Neundorf, Alexander
  • [ECOS] Re: correct handling of condition variables from DSRs   Sergei Organov
    • [ECOS] Re: correct handling of condition variables from DSRs   Fabian Scheler
      • [ECOS] Re: correct handling of condition variables from DSRs   Sergei Organov
      • [ECOS] Re: correct handling of condition variables from DSRs   Fabian Scheler
      • [ECOS] Re: correct handling of condition variables from DSRs   Sergei Organov
    • AW: [ECOS] Re: correct handling of condition variables from DSRs   Neundorf, Alexander
      • AW: [ECOS] Re: correct handling of condition variables from DSRs   Sergei Organov
• [ECOS] how to measure time from within flash_program_buf   Neundorf, Alexander
  • [ECOS] how to measure time from within flash_program_buf   Andrew Lunn
  • [ECOS] how to measure time from within flash_program_buf   David Vrabel
    • [ECOS] how to measure time from within flash_program_buf   Andrew Lunn
      • [ECOS] how to measure time from within flash_program_buf   David Vrabel
  • AW: [ECOS] how to measure time from within flash_program_buf   Neundorf, Alexander
    • [ECOS] how to measure time from within flash_program_buf   Andrew Lunn
• [ECOS] Booting fails for ICACHE   aditya veer singh
• [ECOS] need help in eCos   M Arshad Khan
• [ECOS] Problem with redboot ip_address command   Philippe-Antoine DAVID
  • AW: [ECOS] Problem with redboot ip_address command   Neundorf, Alexander
• [ECOS] Redboot UART driver   Ray, Sujoy (Sujoy)
  • [ECOS] Redboot UART driver   Ray, Sujoy (Sujoy)
  • [ECOS] Redboot UART driver   Andrew Lunn
  • [ECOS] Redboot UART driver   Ray, Sujoy (Sujoy)
• [ECOS] network   David Somerton
  • [ECOS] network   Jürgen Lambrecht
• [ECOS] tftp server stack problems   Jürgen Lambrecht
  • [ECOS] tftp server stack problems   Andrew Lunn
• [ECOS] Problem in linking the program   M Arshad Khan
  • [ECOS] Problem in linking the program   paopaoer maillist
• [ECOS] Any shell available?   Tang Yi
  • [ECOS] Any shell available?   Gary Thomas
    • [ECOS] Any shell available?   Tang Yi
      • [ECOS] Any shell available?   Andrew Lunn
• [ECOS] problem building a redboot floppy with RLTK 8039 drivers   Philippe-Antoine DAVID
  • [ECOS] problem building a redboot floppy with RLTK 8039 drivers   Gary Thomas
• [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
  • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
  • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
    • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • AW: [ECOS] error: no memory region specified for loadable '.ram_vectors'   Ram Sudhir Tadavarthi
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
      • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Andrew Lunn
  • [ECOS] error: no memory region specified for loadable '.ram_vectors'   Agus Ariffianto
• [ECOS] have somebody run the microwidows in vmware   paopaoer maillist
• [ECOS] Hard-Realtime behaviour   R Vamshi Krishna
  • [ECOS] Hard-Realtime behaviour   Fabian Scheler
  • [ECOS] Hard-Realtime behaviour   Wolfgang Köbler
    • [ECOS] Hard-Realtime behaviour   R Vamshi Krishna
    • [ECOS] Hard-Realtime behaviour   Andrew Lunn
      • [ECOS] Hard-Realtime behaviour   Fabian Scheler
      • [ECOS] Hard-Realtime behaviour   Andrew Lunn
      • [ECOS] Hard-Realtime behaviour   R Vamshi Krishna
      • [ECOS] Hard-Realtime behaviour   Andrew Lunn
      • [ECOS] Hard-Realtime behaviour   Andrew Lunn
      • [ECOS] Hard-Realtime behaviour   Enno Luebbers
      • [ECOS] Hard-Realtime behaviour   Nils Labugt
      • [ECOS] Hard-Realtime behaviour   Fabian Scheler
    • [ECOS] Hard-Realtime behaviour   Luis Friedrich
      • [ECOS] Hard-Realtime behaviour   Fabian Scheler
      • [ECOS] Hard-Realtime behaviour   R Vamshi Krishna
• [ECOS] Building redboot with eCos Kernel   Andre-John Mas
  • [ECOS] Re: Building redboot with eCos Kernel   Grant Edwards
• [ECOS] Re: Any shell available?   Anthony Tonizzo
  • [ECOS] Re: Any shell available?   Andrew Lunn
    • [ECOS] Re: Any shell available?   Luis Friedrich
      • [ECOS] Re: Any shell available?   Andrew Lunn
      • [ECOS] Re: Any shell available?   Anthony Tonizzo
      • [ECOS] Re: Any shell available?   David N. Welton
  • [ECOS] Re: Any shell available?   Zimman, Chris
  • [ECOS] Re: Any shell available?   John Carter
• [ECOS] One question.   Zhao.Green@inventec-inc.com
  • [ECOS] One question.   Fabian Scheler
  • [ECOS] One question.   Paul D. DeRocco
  • [ECOS] One question.   Zhao.Green@inventec-inc.com
    • [ECOS] One question.   Michele Portolan
      • [ECOS] One question.   Edgar Grimberg
• [ECOS] i386 target   Marcin Chrusciel
  • [ECOS] i386 target   Andrew Lunn
    • AW: [ECOS] i386 target   Ram Sudhir Tadavarthi
      • [ECOS] i386 target   Andrew Lunn
• [ECOS] Problems with ecosconfig   Денис Шевченко
  • [ECOS] Problems with ecosconfig   Andrew Lunn
    • [ECOS] Re: Problems with ecosconfig   Grant Edwards
• [ECOS] Boot issue without hardware debugger   Andre-John Mas
• [ECOS] Debug issue with Eclipse and GDB   Andre-John Mas

Last message date: Wed May 31 22:42:00 GMT 2006
Archived on: Sun Mar 8 06:57:46 GMT 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...