This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 4/4] catch syscall -- try 3 -- Build system, documentation and testcase


Hi Eli,

On Wed, 2008-11-19 at 00:37 +0200, Eli Zaretskii wrote:

> You did, but since the text says that 252 is for the case of unknown
> mnemonics, it would be better if the example reflected that case as
> well, don't you think?

Right. Here's the new version of the patch. Please take a look :-).

Regards,

-- 
Sérgio Durigan Júnior
Linux on Power Toolchain - Software Engineer
Linux Technology Center - LTC
IBM Brazil
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 5432c88..24be153 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -172,6 +172,9 @@ LIBICONV = @LIBICONV@
 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 
+# Did the user give us a --with-gdb-datadir option?
+GDB_DATADIR_PATH = @GDB_DATADIR_PATH@
+
 # Helper code from gnulib.
 LIBGNU = gnulib/libgnu.a
 INCGNU = -I$(srcdir)/gnulib -Ignulib
@@ -457,6 +460,7 @@ TARGET_OBS = @TARGET_OBS@
 # All target-dependent objects files that require 64-bit CORE_ADDR
 # (used with --enable-targets=all --enable-64-bit-bfd).
 ALL_64_TARGET_OBS = \
+	linux-tdep.o \
 	alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 	alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 	amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \
@@ -468,6 +472,7 @@ ALL_64_TARGET_OBS = \
 
 # All other target-dependent objects files (used with --enable-targets=all).
 ALL_TARGET_OBS = \
+	linux-tdep.o \
 	armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
 	arm-tdep.o arm-wince-tdep.o \
 	avr-tdep.o \
@@ -657,6 +662,8 @@ SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 	valarith.c valops.c valprint.c value.c varobj.c vec.c \
 	wrapper.c \
 	xml-tdesc.c xml-support.c \
+	linux-tdep.c \
+	xml-syscall.c \
 	inferior.c
 
 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
@@ -667,7 +674,7 @@ LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 # wrong if TAGS has files twice).  Because this is tricky to get
 # right, it is probably easiest just to list .h files here directly.
 
-HFILES_NO_SRCDIR = osf-share/cma_debug_client.h	\
+HFILES_NO_SRCDIR = osf-share/cma_debug_client.h	linux-tdep.h \
 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
@@ -727,7 +734,7 @@ config/sparc/nm-sol2.h config/nm-linux.h config/mips/nm-irix5.h	\
 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h	\
 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
-sentinel-frame.h bcache.h symfile.h
+sentinel-frame.h bcache.h symfile.h xml-syscall.h
 
 # Header files that already have srcdir in them, or which are in objdir.
 
@@ -806,10 +813,16 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 	trad-frame.o \
 	tramp-frame.o \
 	solib.o solib-null.o \
-	prologue-value.o memory-map.o xml-support.o \
+	prologue-value.o memory-map.o xml-support.o xml-syscall.o \
 	target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 	inferior.o
 
+# Definitions for the syscall's XML files and dir
+XML_SYSCALLS_DIR = syscalls/
+XML_SYSCALLS_FILES = gdb-syscalls.dtd \
+		     ppc-linux.xml ppc64-linux.xml \
+		     i386-linux.xml amd64-linux.xml
+
 TSOBS = inflow.o
 
 SUBDIRS = @subdirs@
@@ -843,11 +856,38 @@ generated_files = config.h observer.h observer.inc ada-lex.c \
 	$(COMPILE) $<
 	$(POSTCOMPILE)
 
-all: gdb$(EXEEXT) $(CONFIG_ALL)
+all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy
 	@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 .PHONY: all-tui
 all-tui: $(TUI)$(EXEEXT)
 
+xml-syscall-copy:
+	if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
+	  mkdir -p ./$(XML_SYSCALLS_DIR) ; \
+	  list='$(XML_SYSCALLS_FILES)' ; \
+ 	  for file in $$list ; do \
+	    f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
+	    if test -f $$f ; then \
+	      $(INSTALL_DATA) $$f \
+	    	  ./$(XML_SYSCALLS_DIR) ; \
+	    fi ; \
+	  done ; \
+	fi ;
+
+# This target is responsible for properly installing the syscalls'
+# XML files in the system.
+xml-syscall-install:
+	$(SHELL) $(srcdir)/../mkinstalldirs \
+		$(DESTDIR)$(GDB_DATADIR_PATH)/$(XML_SYSCALLS_DIR) ; \
+	list='$(XML_SYSCALLS_FILES)' ; \
+	for file in $$list ; do \
+	  f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
+	  if test -f $$f ; then \
+	    $(INSTALL_DATA) $$f \
+	    	$(DESTDIR)$(GDB_DATADIR_PATH)/$(XML_SYSCALLS_DIR) ; \
+	  fi ; \
+	done ;
+
 installcheck:
 
 # The check target can not use subdir_do, because subdir_do does not
@@ -901,8 +941,11 @@ gdb.z:gdb.1
 # source file and doesn't care about rebuilding or just wants to save the
 # time it takes for make to check that all is up to date.
 # install-only is intended to address that need.
-install: all install-only
-install-only: $(CONFIG_INSTALL)
+install: all install-only 
+
+# The "install-only" target also installs the syscalls' XML files in
+# the system.
+install-only: $(CONFIG_INSTALL) xml-syscall-install
 	transformed_name=`t='$(program_transform_name)'; \
 			  echo gdb | sed -e "$$t"` ; \
 		if test "x$$transformed_name" = x; then \
@@ -1258,6 +1301,7 @@ force_update:
 MAKEOVERRIDES=
 
 ALLDEPFILES = \
+	linux-tdep.c \
 	aix-thread.c \
 	alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
 	alpha-tdep.c alpha-mdebug-tdep.c \
diff --git a/gdb/configure.ac b/gdb/configure.ac
index 054d5c2..77e2f6c 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -118,6 +118,36 @@ case ${debugdir} in
   ;;
 esac
 
+# GDB's datadir relocation
+
+gdbdatadir=${datadir}/gdb
+
+AC_ARG_WITH([gdb-datadir],
+  [AS_HELP_STRING([--with-gdb-datadir],
+                  [look for global separate data files in this path [DATADIR/gdb]])], [gdbdatadir="${withval}"])
+
+AC_DEFINE_DIR(GDB_DATADIR, gdbdatadir,
+              [Global directory for GDB data files. ])
+
+if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
+  if test "x$prefix" = xNONE; then
+    test_prefix=/usr/local
+  else
+    test_prefix=$prefix
+  fi
+else
+  test_prefix=$exec_prefix
+fi
+
+case ${gdbdatadir} in
+  "${test_prefix}"|"${test_prefix}/"*|\
+  '${exec_prefix}'|'${exec_prefix}/'*)
+    AC_DEFINE(GDB_DATADIR_RELOCATABLE, 1, [Define if GDB datadir should be relocated when GDB is moved.])
+  ;;
+esac
+GDB_DATADIR_PATH=${gdbdatadir}
+AC_SUBST(GDB_DATADIR_PATH)
+
 AC_CONFIG_SUBDIRS(doc testsuite)
 
 # Check whether to support alternative target configurations
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index 95556f8..cea6d88 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -36,7 +36,7 @@ alpha*-*-osf*)
 alpha*-*-linux*)
 	# Target: Little-endian Alpha running Linux
 	gdb_target_obs="alpha-tdep.o alpha-mdebug-tdep.o alpha-linux-tdep.o \
-			solib.o solib-svr4.o"
+			solib.o solib-svr4.o linux-tdep.o"
 	;;
 alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
 	# Target: FreeBSD/alpha
@@ -63,7 +63,7 @@ alpha*-*-*)
 am33_2.0*-*-linux*)
 	# Target: Matsushita mn10300 (AM33) running Linux
 	gdb_target_obs="mn10300-tdep.o mn10300-linux-tdep.o corelow.o \
-			solib.o solib-svr4.o"
+			solib.o solib-svr4.o linux-tdep.o"
 	;;
 
 arm*-wince-pe | arm*-*-mingw32ce*)
@@ -75,7 +75,8 @@ arm*-wince-pe | arm*-*-mingw32ce*)
 arm*-*-linux*)
 	# Target: ARM based machine running GNU/Linux
 	gdb_target_obs="arm-tdep.o arm-linux-tdep.o glibc-tdep.o \
-			solib.o solib-svr4.o symfile-mem.o corelow.o"
+			solib.o solib-svr4.o symfile-mem.o corelow.o \
+			linux-tdep.o"
 	build_gdbserver=yes
 	;;
 arm*-*-netbsd* | arm*-*-knetbsd*-gnu)
@@ -128,7 +129,7 @@ hppa*-*-hpux*)
 hppa*-*-linux*)
 	# Target: HP PA-RISC running Linux
 	gdb_target_obs="hppa-tdep.o hppa-linux-tdep.o glibc-tdep.o \
-			solib.o solib-svr4.o symfile-mem.o"
+			solib.o solib-svr4.o symfile-mem.o linux-tdep.o"
 	;;
 hppa*-*-netbsd*)
 	# Target: NetBSD/hppa
@@ -185,7 +186,7 @@ i[34567]86-*-solaris*)
 i[34567]86-*-linux*)
 	# Target: Intel 386 running GNU/Linux
 	gdb_target_obs="i386-tdep.o i386-linux-tdep.o glibc-tdep.o i387-tdep.o \
-			solib.o solib-svr4.o symfile-mem.o corelow.o"
+			solib.o solib-svr4.o symfile-mem.o corelow.o linux-tdep.o"
 	build_gdbserver=yes
 	;;
 i[34567]86-*-gnu*)
@@ -213,7 +214,7 @@ i[34567]86-*-*)
 ia64-*-linux*)
 	# Target: Intel IA-64 running GNU/Linux
 	gdb_target_obs="ia64-tdep.o ia64-linux-tdep.o \
-			solib.o solib-svr4.o symfile-mem.o"
+			solib.o solib-svr4.o symfile-mem.o linux-tdep.o"
 	build_gdbserver=yes
 	;;
 ia64*-*-*)
@@ -237,7 +238,8 @@ m32c-*-*)
 m32r*-*-linux*)
 	# Target: Renesas M32R running GNU/Linux
 	gdb_target_obs="m32r-tdep.o m32r-linux-tdep.o remote-m32r-sdi.o \
-			glibc-tdep.o solib.o solib-svr4.o symfile-mem.o"
+			glibc-tdep.o solib.o solib-svr4.o symfile-mem.o \
+			linux-tdep.o"
 	gdb_sim=../sim/m32r/libsim.a
 	build_gdbserver=yes
 	;;
@@ -262,7 +264,7 @@ fido-*-elf*)
 m68*-*-linux*)
 	# Target: Motorola m68k with a.out and ELF
 	gdb_target_obs="m68k-tdep.o m68klinux-tdep.o solib.o solib-svr4.o \
-			glibc-tdep.o symfile-mem.o"
+			glibc-tdep.o symfile-mem.o linux-tdep.o"
 	build_gdbserver=yes
 	;;
 m68*-*-netbsd* | m68*-*-knetbsd*-gnu)
@@ -298,7 +300,8 @@ mips*-sgi-irix6*)
 mips*-*-linux*)
 	# Target: Linux/MIPS
 	gdb_target_obs="mips-tdep.o mips-linux-tdep.o glibc-tdep.o \
-			corelow.o solib.o solib-svr4.o symfile-mem.o"
+			corelow.o solib.o solib-svr4.o symfile-mem.o \
+			linux-tdep.o"
 	gdb_sim=../sim/mips/libsim.a
 	build_gdbserver=yes
 	;;
@@ -349,7 +352,8 @@ powerpc-*-aix* | rs6000-*-*)
 powerpc-*-linux* | powerpc64-*-linux*)
 	# Target: PowerPC running Linux
 	gdb_target_obs="rs6000-tdep.o ppc-linux-tdep.o ppc-sysv-tdep.o \
-			solib.o solib-svr4.o corelow.o symfile-mem.o"
+			solib.o solib-svr4.o corelow.o symfile-mem.o \
+			linux-tdep.o"
 	gdb_sim=../sim/ppc/libsim.a
 	build_gdbserver=yes
 	;;
@@ -376,7 +380,8 @@ score-*-*)
 sh*-*-linux*)
 	# Target: GNU/Linux Super-H
 	gdb_target_obs="sh-tdep.o sh64-tdep.o sh-linux-tdep.o monitor.o \
-			dsrec.o solib.o solib-svr4.o symfile-mem.o glibc-tdep.o"
+			dsrec.o solib.o solib-svr4.o symfile-mem.o glibc-tdep.o \
+			linux-tdep.o"
 	gdb_sim=../sim/sh/libsim.a
 	build_gdbserver=yes
 	;;
@@ -404,13 +409,14 @@ sh*)
 sparc-*-linux*)
 	# Target: GNU/Linux SPARC
 	gdb_target_obs="sparc-tdep.o sparc-sol2-tdep.o sol2-tdep.o \
-			sparc-linux-tdep.o solib.o solib-svr4.o symfile-mem.o"
+			sparc-linux-tdep.o solib.o solib-svr4.o symfile-mem.o \
+			linux-tdep.o"
 	;;
 sparc64-*-linux*)
 	# Target: GNU/Linux UltraSPARC
 	gdb_target_obs="sparc64-tdep.o sparc64-sol2-tdep.o sol2-tdep.o \
 			sparc64-linux-tdep.o sparc-tdep.o sparc-sol2-tdep.o \
-			sparc-linux-tdep.o solib.o solib-svr4.o"
+			sparc-linux-tdep.o solib.o solib-svr4.o linux-tdep.o"
 	build_gdbserver=yes
 	;;
 sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu)
@@ -508,7 +514,8 @@ x86_64-*-linux*)
 	# Target: GNU/Linux x86-64
 	gdb_target_obs="amd64-tdep.o amd64-linux-tdep.o i386-tdep.o \
 			i387-tdep.o i386-linux-tdep.o glibc-tdep.o \
-			solib.o solib-svr4.o corelow.o symfile-mem.o"
+			solib.o solib-svr4.o corelow.o symfile-mem.o \
+			linux-tdep.o"
 	build_gdbserver=yes
 	;;
 x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu)
@@ -531,7 +538,8 @@ x86_64-*-openbsd*)
 xtensa*-*-linux*)	gdb_target=linux
 	# Target: GNU/Linux Xtensa
 	gdb_target_obs="xtensa-tdep.o xtensa-config.o xtensa-linux-tdep.o \
-			solib.o solib-svr4.o corelow.o symfile-mem.o"
+			solib.o solib-svr4.o corelow.o symfile-mem.o \
+			linux-tdep.o"
 	build_gdbserver=yes
 	;;
 xtensa*)
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index aef5308..ebcddd9 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -3635,6 +3635,98 @@ A failed Ada assertion.
 A call to @code{exec}.  This is currently only available for HP-UX
 and @sc{gnu}/Linux.
 
+@item syscall
+@itemx syscall @r{[}@var{name} @r{|} @var{number}@r{]} @r{...}
+@cindex break on a system call.
+A call to or return from a @code{syscall}.  If no argument is specified,
+then it catches a call to or return from any system call.
+
+@var{name} can be any valid system call name in the system.  You can
+use the @value{GDBN} command-line completion facilities to list the
+available choices.  @xref{Completion,, Command Completion}, for
+details on how to do this.
+
+You may also specify the system call numerically.  This may be useful
+if @value{GDBN} does not fully support your system's list of system
+calls.
+
+The example below illustrates how this command works if you don't provide
+arguments to it:
+
+@smallexample
+(@value{GDBP}) catch syscall
+Catchpoint 1 (syscall)
+(@value{GDBP}) r
+Starting program: /tmp/catch-syscall
+
+Catchpoint 1 (call to syscall 'close'), 0xffffe424 in __kernel_vsyscall ()
+(@value{GDBP}) c
+Continuing.
+
+Catchpoint 1 (returned from syscall 'close'), 0xffffe424 in __kernel_vsyscall ()
+(@value{GDBP})
+@end smallexample
+
+Here is an example of catching a system call by name:
+
+@smallexample
+(@value{GDBP}) catch syscall chroot
+Catchpoint 1 (syscall(s) 'chroot')
+(@value{GDBP}) r
+Starting program: /tmp/catch-syscall
+
+Catchpoint 1 (call to syscall 'chroot'), 0xffffe424 in __kernel_vsyscall ()
+(@value{GDBP}) c
+Continuing.
+
+Catchpoint 1 (returned from syscall 'chroot'), 0xffffe424 in __kernel_vsyscall ()
+(@value{GDBP})
+@end smallexample
+
+And last but not least, an example of specifying a system call
+numerically:
+
+@smallexample
+(@value{GDBP}) catch syscall 252
+Catchpoint 1 (syscall(s) 'exit_group')
+(@value{GDBP}) r
+Starting program: /tmp/catch-syscall
+
+Catchpoint 1 (call to syscall 'exit_group'), 0xffffe424 in __kernel_vsyscall ()
+(@value{GDBP}) c
+Continuing.
+
+Program exited normally.
+(@value{GDBP})
+@end smallexample
+
+If you configure @value{GDBN} using the @samp{--without-expat} option,
+it will not be able to display syscall names.  Also, if your
+architecture does not have an XML file describing its system calls,
+you will not be able to see the syscall names.  In either case, you
+will see a warning like this:
+
+@smallexample
+(@value{GDBP}) catch syscall
+warning: Could not open "syscalls/i386-linux.xml"
+warning: Could not load the syscall XML file 'syscalls/i386-linux.xml'.
+GDB will not be able to display syscall names.
+Catchpoint 1 (syscall)
+(@value{GDBP})
+@end smallexample
+
+Of course, the file name will change depending on your architecture and system.
+
+Still using the example above, you can also try to catch a syscall by its
+number.  In this case, you would see something like:
+
+@smallexample
+(@value{GDBP}) catch syscall 252
+Catchpoint 1 (syscall(s) 252)
+@end smallexample
+
+Again, in this case @value{GDBN} would not be able to display syscall's names.
+
 @item fork
 A call to @code{fork}.  This is currently only available for HP-UX
 and @sc{gnu}/Linux.
diff --git a/gdb/testsuite/gdb.base/Makefile.in b/gdb/testsuite/gdb.base/Makefile.in
index 9f382db..12db521 100644
--- a/gdb/testsuite/gdb.base/Makefile.in
+++ b/gdb/testsuite/gdb.base/Makefile.in
@@ -12,7 +12,7 @@ EXECUTABLES = all-types annota1 bitfields break \
 	scope section_command setshow setvar shmain sigall signals \
 	solib solib_sl so-impl-ld so-indr-cl \
 	step-line step-test structs structs2 \
-	twice-tmp varargs vforked-prog watchpoint whatis
+	twice-tmp varargs vforked-prog watchpoint whatis catch-syscall
 
 MISCELLANEOUS = coremmap.data ../foobar.baz \
 	shr1.sl shr2.sl solib_sl.sl solib1.sl solib2.sl
diff --git a/gdb/testsuite/gdb.base/catch-syscall.c b/gdb/testsuite/gdb.base/catch-syscall.c
new file mode 100644
index 0000000..64850de
--- /dev/null
+++ b/gdb/testsuite/gdb.base/catch-syscall.c
@@ -0,0 +1,25 @@
+/* This file is used to test the 'catch syscall' feature on GDB.
+ 
+   Please, if you are going to edit this file DO NOT change the syscalls
+   being called (nor the order of them).  If you really must do this, then
+   take a look at catch-syscall.exp and modify there too.
+
+   Written by Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
+   September, 2008 */
+
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+int
+main (void)
+{
+	/* A close() with a wrong argument.  We are only
+	   interested in the syscall.  */
+	close (-1);
+
+	chroot (".");
+
+	/* The last syscall.  Do not change this.  */
+	_exit (0);
+}
diff --git a/gdb/testsuite/gdb.base/catch-syscall.exp b/gdb/testsuite/gdb.base/catch-syscall.exp
new file mode 100644
index 0000000..a9f6937
--- /dev/null
+++ b/gdb/testsuite/gdb.base/catch-syscall.exp
@@ -0,0 +1,386 @@
+#   Copyright 1997, 1999, 2007, 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# This program tests the 'catch syscall' functionality.
+#
+# It was written by Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
+# on September/2008.
+
+if { [is_remote target] || ![isnative] } then {
+    continue
+}
+
+set prms_id 0
+set bug_id 0
+
+global srcfile
+set testfile "catch-syscall"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# All (but the last) syscalls from the example code
+# They are ordered according to the file, so do not change this.
+set all_syscalls { "close" "chroot" }
+# The last syscall (exit()) does not return, so
+# we cannot expect the catchpoint to be triggered
+# twice.  It is a special case.
+set last_syscall "exit_group"
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     untested catch-syscall.exp
+     return -1
+}
+
+# Until "catch syscall" is implemented on other targets...
+if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+    continue
+}
+
+# This shall be updated whenever 'catch syscall' is implemented
+# on some architecture.
+#if { ![istarget "x86_64-*-linux*"] && ![istarget "i\[34567\]86-*-linux*"]
+if { ![istarget "i\[34567\]86-*-linux*"]
+     && ![istarget "powerpc-*-linux*"] && ![istarget "powerpc64-*-linux*"] } {
+     continue
+}
+
+# Internal procedure used to check if, before any syscall is caught,
+# the command 'info breakpoints' correctly lists the catchpoints AND
+# says that nothing was caught yet.
+proc check_init_info_breakpoints {} {
+    global gdb_prompt
+
+    # Verifying that the catchpoint appears in the 'info breakpoints'
+    # command, but with "<any syscall>".
+    set thistest "catch syscall appears in 'info breakpoints'"
+    gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall \"<any syscall>\".*" $thistest
+}
+
+# This procedure checks if, after a syscall catchpoint is hit, the
+# command 'info breakpoints' correctly lists the syscall name.
+proc check_info_breakpoints { syscall } {
+    global gdb_prompt
+
+    set thistest "syscall $syscall appears in 'info breakpoints'"
+    gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall (.)?${syscall}(.)?.*" $thistest
+}
+
+# This procedure checks if there was a call to a syscall.
+proc check_call_to_syscall { syscall } {
+    global gdb_prompt
+
+    set thistest "program has called $syscall"
+    gdb_test "continue" "Catchpoint .*(call to syscall .?${syscall}.?).*" $thistest
+
+    # Checking if the syscall is reported to be caught in
+    # 'info breakpoints'.
+    check_info_breakpoints "$syscall"
+}
+
+# This procedure checks if the syscall returned.
+proc check_return_from_syscall { syscall } {
+    global gdb_prompt
+
+    set thistest "syscall $syscall has returned"
+    gdb_test "continue" "Catchpoint .*(returned from syscall (.)?${syscall}(.)?).*" $thistest
+
+    # Checking if the syscall is reported to be caught in
+    # 'info breakpoints'.
+    check_info_breakpoints "$syscall"
+}
+
+# Internal procedure that performs two 'continue' commands and checks if
+# a syscall call AND return occur.
+proc check_continue { syscall } {
+    global gdb_prompt
+
+    # Testing if the 'continue' stops at the
+    # specified syscall_name.  If it does, then it should
+    # first print that the infeior has called the syscall,
+    # and after print that the syscall has returned.
+
+    # Testing if the inferiorr has called the syscall.
+    check_call_to_syscall $syscall
+    # And now, that the syscall has returned.
+    check_return_from_syscall $syscall
+}
+
+# Inserts a syscall catchpoint with an argument.
+proc insert_catch_syscall_with_arg { syscall } {
+    global gdb_prompt
+
+    # Trying to set the syscall
+    set thistest "catch syscall with arguments ($syscall)"
+    gdb_test "catch syscall $syscall" "Catchpoint .*(syscall\[(\]s\[)\] (.)?${syscall}(.)?).*" $thistest
+}
+
+proc check_for_program_end {} {
+    global gdb_prompt
+
+    # Deleting the catchpoints
+    delete_breakpoints
+
+    set thistest "successful program end"
+    gdb_test "continue" "Program exited normally.*" $thistest
+
+}
+
+proc test_catch_syscall_without_args {} {
+    global gdb_prompt all_syscalls last_syscall
+
+    # Trying to set the syscall
+    set thistest "setting catch syscall without arguments"
+    gdb_test "catch syscall" "Catchpoint .*(syscall).*" $thistest
+
+    check_init_info_breakpoints
+
+    # We have to check every syscall
+    foreach name $all_syscalls {
+        check_continue $name
+    }
+
+    # At last but not least, we check if the inferior
+    # has called the last (exit) syscall.
+    check_call_to_syscall $last_syscall
+
+    # Now let's see if the inferior correctly finishes.
+    check_for_program_end
+}
+
+proc test_catch_syscall_with_args {} {
+    global gdb_prompt
+    set syscall_name "close"
+
+    insert_catch_syscall_with_arg $syscall_name 
+    check_init_info_breakpoints
+
+    # Can we continue until we catch the syscall?
+    check_continue $syscall_name
+
+    # Now let's see if the inferior correctly finishes.
+    check_for_program_end
+}
+
+proc test_catch_syscall_with_wrong_args {} {
+    global gdb_prompt
+    # mlock is not called from the source
+    set syscall_name "mlock"
+
+    insert_catch_syscall_with_arg $syscall_name
+    check_init_info_breakpoints
+
+    # Now, we must verify if the program stops with a continue.
+    # If it doesn't, everything is right (since we don't have
+    # a syscall named "mlock" in it).  Otherwise, this is a failure.
+    set thistest "catch syscall with unused syscall ($syscall_name)"
+    gdb_test "continue" "Program exited normally.*" $thistest
+}
+
+proc test_catch_syscall_restarting_inferior {} {
+    global gdb_prompt
+    set syscall_name "chroot"
+
+    insert_catch_syscall_with_arg $syscall_name
+    check_init_info_breakpoints
+
+    # Let's first reach the call of the syscall.
+    check_call_to_syscall $syscall_name
+
+    # Now, restart the program
+    rerun_to_main
+
+    # And check for call/return
+    check_continue $syscall_name
+
+    # Can we finish?
+    check_for_program_end
+}
+
+proc do_syscall_tests {} {
+    global gdb_prompt srcdir
+
+    # First, we need to set GDB datadir.
+    send_gdb "maintenance set gdb_datadir $srcdir/..\n"
+    gdb_expect 10 {
+	-re "$gdb_prompt $" {
+	    verbose "Setting GDB datadir to $srcdir/..." 2
+	}
+	timeout {
+	    error "Couldn't set GDB datadir."
+	}
+    }
+
+    # Verify that the 'catch syscall' help is available
+    set thistest "help catch syscall"
+    gdb_test "help catch syscall" "Catch system calls.*" $thistest
+
+    # Try to set a catchpoint to a nonsense syscall
+    set thistest "catch syscall to a nonsense syscall is prohibited"
+    gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .*" $thistest
+
+    # Testing the 'catch syscall' command without arguments.
+    # This test should catch any syscalls.
+    if [runto_main] then { test_catch_syscall_without_args }
+
+    # Testing the 'catch syscall' command with arguments.
+    # This test should only catch the specified syscall.
+    if [runto_main] then { test_catch_syscall_with_args }
+
+    # Testing the 'catch syscall' command with WRONG arguments.
+    # This test should not trigger any catchpoints.
+    if [runto_main] then { test_catch_syscall_with_wrong_args }
+
+    # Testing the 'catch' syscall command during a restart of
+    # the inferior.
+    if [runto_main] then { test_catch_syscall_restarting_inferior }
+}
+
+proc test_catch_syscall_fail_noxml {} {
+    global gdb_prompt
+
+    # Sanitizing.
+    delete_breakpoints
+
+    # Testing to see if we receive a warning when calling "catch syscall"
+    # without XML support.
+    set thistest "Catch syscall displays a warning when there is no XML support"
+    gdb_test "catch syscall" "warning: Could not open .*warning: Could not load the syscall XML file .*GDB will not be able to display syscall names.*Catchpoint .*(syscall).*" $thistest
+
+    # Since the catchpoint was set, we must check if it's present at
+    # "info breakpoints"
+    check_init_info_breakpoints
+
+    # Sanitizing.
+    delete_breakpoints
+}
+
+proc test_catch_syscall_without_args_noxml {} {
+    # We will need the syscall names even not using it
+    # because we need to know know many syscalls are in
+    # the example file.
+    global gdb_prompt all_syscalls last_syscall
+
+    delete_breakpoints
+
+    set thistest "Catch syscall without arguments and without XML support"
+    gdb_test "catch syscall" "Catchpoint .*(syscall).*"
+
+    # Now, we should be able to set a catchpoint,
+    # and GDB shall not display the warning anymore.
+    foreach name $all_syscalls {
+        # Unfortunately, we don't know the syscall number
+        # that will be caught because this information is
+        # arch-dependent.  Thus, we try to catch anything
+        # similar to a number.
+        check_continue "\[0-9\]*"
+    }
+
+    # At last but not least, we check if the inferior
+    # has called the last (exit) syscall.
+    check_call_to_syscall "\[0-9\]*"
+
+    delete_breakpoints
+}
+
+proc test_catch_syscall_with_args_noxml {} {
+    global gdb_prompt
+
+    # The number of the "close" syscall.  This is our
+    # options for a "long-estabilished" syscall in all
+    # Linux architectures, but unfortunately x86_64 and
+    # a few other platforms don't "follow the convention".
+    # Because of this, we need this ugly check :-(.
+    set close_number ""
+    if { [istarget "x86_64-*-linux*"] } {
+        set close_number "3"
+    } else {
+        set close_number "6"
+    }
+
+    delete_breakpoints
+
+    insert_catch_syscall_with_arg $close_number
+    check_init_info_breakpoints
+
+    check_continue $close_number
+
+    delete_breakpoints
+}
+
+proc test_catch_syscall_with_wrong_args_noxml {} {
+    global gdb_prompt
+
+    delete_breakpoints
+
+    # Even without XML support, GDB should not accept unknown
+    # syscall names for the catchpoint.
+    set thistest "Catch a nonsense syscall without XML support"
+    gdb_test "catch syscall nonsense_syscall" "Unknown syscall name .nonsense_syscall.*" $thistest
+
+    delete_breakpoints
+}
+
+proc do_syscall_tests_without_xml {} {
+    global gdb_prompt srcdir
+
+    # In this case, we don't need to set GDB's datadir because
+    # we want GDB to display only numbers, not names.  So, let's
+    # begin with the tests.
+
+    # The first test is to see if GDB displays a warning when we
+    # try to catch syscalls without the XML support.
+    test_catch_syscall_fail_noxml
+
+    # Now, let's test if we can catch syscalls without XML support.
+    # We should succeed, but GDB is not supposed to print syscall names.
+    if [runto_main] then { test_catch_syscall_without_args_noxml }
+
+    # The only valid argument "catch syscall" should accept is the
+    # syscall number, and not the name (since it can't translate a
+    # name to a number).
+    #
+    # It's worth mentioning that we only try to catch the syscall
+    # close().  This is because the syscall number is an arch-dependent
+    # information, so we can't assume that we know every syscall number
+    # in this system.  Therefore, we have decided to use a "long-estabilished"
+    # system call, and close() just sounded the right choice :-).
+    if [runto_main] then { test_catch_syscall_with_args_noxml }
+
+    # Now, we'll try to provide a syscall name (valid or not) to the command,
+    # and expect it to fail.
+    if [runto_main] then { test_catch_syscall_with_wrong_args_noxml }
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Execute the tests, using XML support
+do_syscall_tests
+
+# Restart gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Execute the tests, without XML support.  In this case, GDB will
+# only display syscall numbers, and not syscall names.
+do_syscall_tests_without_xml

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]