[PATCH 1/5 v1] LoongArch: bfd: Add new reloc types.

[liuzhensong]

在 2022/7/19 上午11:57, Fangrui Song 写道:
> On 2022-07-18, WANG Xuerui wrote:
>> On 2022/7/18 19:33, Xi Ruoyao wrote:
>>> On Mon, 2022-07-18 at 18:06 +0800, WANG Xuerui wrote:
>>>> (Adding Ruoyao and MaskRay to CC, who might be interested in this
>>>> development as well, as it concerns the linker implementation.)
>>> I've already subscribed binutils@sourceware.org in order not to be
>>> passed by.
>
> I am subscribed, too. Direct CC helps me find the discussions:)
>
>>>> I think I've voiced my concerns over the naming of these ops multiple
>>>> times already; the primary comment ([1]; in English) was posted 
>>>> back in
>>>> May but no one in your team responded.
>>>>
>>>> Reproducing the content (and adjusting a little) here:
>>>>
>>>>
>>>> Overall in a good direction (and IMHO the direction everyone should 
>>>> have
>>>> taken in the first place), thanks!
>>>>
>>> Yes, we've been paying additional costs using those "stack based
>>> relocation".  I'd like to know why they were proposed in first place?
>>> (Not accusing anyone, just my curiosity: AFAIK no other targets ever
>>> used such a stack for relocation.)
>> As previously pointed out on this list, rx and rl78 both use 
>> stack-based relocs. (Both come from Renesas, so I do think it's 
>> delibrate design decision, but of course the original Renesas 
>> justification is most probably buried in history.) I explained this 
>> in https://github.com/loongson/binutils-gdb/issues/134 before.
>
> Stack machines aren't really suitable for ELF relocations.
> Each relocation takes sizeof(Elf64_Rela) = 24 byte, higher than older
> object file formats.
>
> ELF32 allows 256 relocation types. There aren't too many to waste.
>
>>>
>>> /* snip */
>>>
>>>
>>>> FYI, I did make a list of my suggested names for these reloc types
>>>> ("BFD_RELOC_LARCH_" abbreviated to "B_R_L_"):
>>>>
>>>> Original name           Suggested name
>>>> -------------           --------------
>>>> B_R_L_B16               B_R_L_PCREL_SK16 *1
>>>> B_R_L_B21               B_R_L_PCREL_SD5K16
>>>> B_R_L_B26               B_R_L_PCREL_SD10K16
>>>> B_R_L_ABS_LO12          B_R_L_ABS_0_SK12
>>>> B_R_L_ABS_HI20          B_R_L_ABS_12_SJ20
>>>> B_R_L_ABS64_LO20        B_R_L_ABS_32_SJ20
>>>> B_R_L_ABS64_HI12        B_R_L_ABS_52_SK12
>
> aarch64 calls these G0/G1/G2/G3 while ppc calls these 
> LO/HI/HIGHER/HIGHEST.
> A name mentioning the offset and the length looks good to me, too.
> A too-long name may have problems in the default (non-wide) output of
> readelf -r.
>
>>>> B_R_L_PCALA_LO12 B_R_L_PCALA_0_SK12 *2
>>>> B_R_L_PCALA_HI20        B_R_L_PCALA_12_SJ20
>>>> B_R_L_PCALA64_LO20      B_R_L_PCALA_32_SJ20 *3
>>>> B_R_L_PCALA64_HI12      B_R_L_PCALA_52_SK12
>>>> B_R_L_GOT_PC_LO12       B_R_L_GOT_PCALA_0_SK12 *4
>>>> B_R_L_GOT_PC_HI20       B_R_L_GOT_PCALA_12_SJ20
>>>> B_R_L_GOT64_PC_LO20     B_R_L_GOT_PCALA_32_SJ20
>>>> B_R_L_GOT64_PC_HI12     B_R_L_GOT_PCALA_52_SK12
>>>> B_R_L_GOT64_LO12        B_R_L_GOT_ABS_0_SK12 *5
>>>> B_R_L_GOT64_HI20        B_R_L_GOT_ABS_12_SJ20
>>>> B_R_L_GOT64_LO20        B_R_L_GOT_ABS_32_SJ20
>>>> B_R_L_GOT64_HI12        B_R_L_GOT_ABS_52_SK12
>
>
>>>> B_R_L_TLS_LE_LO12 B_R_L_TLS_LE_ABS_0_SK12
>>>> B_R_L_TLS_LE_HI20       B_R_L_TLS_LE_ABS_12_SJ20
>>>> B_R_L_TLS_LE64_LO20     B_R_L_TLS_LE_ABS_32_SJ20
>>>> B_R_L_TLS_LE64_HI12     B_R_L_TLS_LE_ABS_52_SK12
>>>> B_R_L_TLS_IE_PC_LO12    B_R_L_TLS_IE_PCALA_0_SK12
>>>> B_R_L_TLS_IE_PC_HI20    B_R_L_TLS_IE_PCALA_12_SJ20
>>>> B_R_L_TLS_IE64_PC_LO20  B_R_L_TLS_IE_PCALA_32_SJ20
>>>> B_R_L_TLS_IE64_PC_HI12  B_R_L_TLS_IE_PCALA_52_SK12
>>>> B_R_L_TLS_IE64_LO12     B_R_L_TLS_IE_ABS_0_SK12
>>>> B_R_L_TLS_IE64_HI20     B_R_L_TLS_IE_ABS_12_SJ20
>>>> B_R_L_TLS_IE64_LO20     B_R_L_TLS_IE_ABS_32_SJ20
>>>> B_R_L_TLS_IE64_HI12     B_R_L_TLS_IE_ABS_52_SK12
>>>> B_R_L_TLS_LD_PC_HI20    B_R_L_TLS_LD_PCALA_12_SJ20 *6
>>>> B_R_L_TLS_LD64_HI20     B_R_L_TLS_LD_ABS_12_SJ20
>>>> B_R_L_TLS_GD_PC_HI20    B_R_L_TLS_GD_PCALA_12_SJ20
>>>> B_R_L_TLS_GD64_HI20     B_R_L_TLS_GD_ABS_12_SJ20
>
> aarch64 relocation types are well named. It's obvious what suppress
> overflow checking.
>
> For LO12, I expect that there are two variants: one with overflow check,
> the other without.
>
In what scenarios will no check overflow be used? Any documentation or 
examples?

>>> It's overall better, but those "J, K" etc are cryptic IMHO.  And for
>>> "B_R_L_B16" I think "B_R_L_PCREL_SK16" fails to express that the offset
>>> should be shifted right by 2, so I'd keep B_R_L_B16 (and similarly,
>>> B_R_L_B21 and B_R_L_B26) like the PCALA case.
>>>
>> The slot names come from 
>> https://github.com/loongson/LoongArch-Documentation/pull/56 (to 
>> non-Chinese speakers: English translation still TODO, but hopefully 
>> at least the ABNF and the few tables should be intelligible even 
>> without translation).
>>
>> As for the PCREL and implicit shifts, maybe a planned extension of 
>> the slot syntax could help. I plan to submit an Assembly Language 
>> Convention after the Instruction Format Convention gets reviewed and 
>> merged, and with this new convention such an extension is necessary 
>> anyway for accommodating the current assembly syntax as described by 
>> the ISA manual, able to express the <<2's and +1's for the 
>> PC-manipulating and ALSL insns.
>>
>> For example, let's say the extension works like this: ordinary slot 
>> syntax, plus "p", plus an postprocess operator, with "s\d+" for "imm 
>> slot = assembly operand >> N", and "p\d+" for "imm slot = assembly 
>> operand + N". Then we could say "B_R_L_PCREL_SK16PS2" and have all 
>> the niceties. (In an ideal world, the LoongArch opcodes 
>> implementation should be modified to use this convention too, so for 
>> example it will be something like "DJSk16ps2" for JIRL, "JDSk16ps2" 
>> for BLT (notice the reversed operand order) and "DJKUa2pp1" for ALSL 
>> insns.
>>