[PATCH 1/5 v1] LoongArch: bfd: Add new reloc types.

[Fangrui Song]

On 2022-07-18, WANG Xuerui wrote:
>On 2022/7/18 19:33, Xi Ruoyao wrote:
>>On Mon, 2022-07-18 at 18:06 +0800, WANG Xuerui wrote:
>>>(Adding Ruoyao and MaskRay to CC, who might be interested in this
>>>development as well, as it concerns the linker implementation.)
>>I've already subscribed binutils@sourceware.org in order not to be
>>passed by.

I am subscribed, too. Direct CC helps me find the discussions:)

>>>I think I've voiced my concerns over the naming of these ops multiple
>>>times already; the primary comment ([1]; in English) was posted back in
>>>May but no one in your team responded.
>>>
>>>Reproducing the content (and adjusting a little) here:
>>>
>>>
>>>Overall in a good direction (and IMHO the direction everyone should have
>>>taken in the first place), thanks!
>>>
>>Yes, we've been paying additional costs using those "stack based
>>relocation".  I'd like to know why they were proposed in first place?
>>(Not accusing anyone, just my curiosity: AFAIK no other targets ever
>>used such a stack for relocation.)
>As previously pointed out on this list, rx and rl78 both use 
>stack-based relocs. (Both come from Renesas, so I do think it's 
>delibrate design decision, but of course the original Renesas 
>justification is most probably buried in history.) I explained this in 
>https://github.com/loongson/binutils-gdb/issues/134 before.

Stack machines aren't really suitable for ELF relocations.
Each relocation takes sizeof(Elf64_Rela) = 24 byte, higher than older
object file formats.

ELF32 allows 256 relocation types. There aren't too many to waste.

>>
>>/* snip */
>>
>>
>>>FYI, I did make a list of my suggested names for these reloc types
>>>("BFD_RELOC_LARCH_" abbreviated to "B_R_L_"):
>>>
>>>Original name           Suggested name
>>>-------------           --------------
>>>B_R_L_B16               B_R_L_PCREL_SK16 *1
>>>B_R_L_B21               B_R_L_PCREL_SD5K16
>>>B_R_L_B26               B_R_L_PCREL_SD10K16
>>>B_R_L_ABS_LO12          B_R_L_ABS_0_SK12
>>>B_R_L_ABS_HI20          B_R_L_ABS_12_SJ20
>>>B_R_L_ABS64_LO20        B_R_L_ABS_32_SJ20
>>>B_R_L_ABS64_HI12        B_R_L_ABS_52_SK12

aarch64 calls these G0/G1/G2/G3 while ppc calls these LO/HI/HIGHER/HIGHEST.
A name mentioning the offset and the length looks good to me, too.
A too-long name may have problems in the default (non-wide) output of
readelf -r.

>>>B_R_L_PCALA_LO12        B_R_L_PCALA_0_SK12 *2
>>>B_R_L_PCALA_HI20        B_R_L_PCALA_12_SJ20
>>>B_R_L_PCALA64_LO20      B_R_L_PCALA_32_SJ20 *3
>>>B_R_L_PCALA64_HI12      B_R_L_PCALA_52_SK12
>>>B_R_L_GOT_PC_LO12       B_R_L_GOT_PCALA_0_SK12 *4
>>>B_R_L_GOT_PC_HI20       B_R_L_GOT_PCALA_12_SJ20
>>>B_R_L_GOT64_PC_LO20     B_R_L_GOT_PCALA_32_SJ20
>>>B_R_L_GOT64_PC_HI12     B_R_L_GOT_PCALA_52_SK12
>>>B_R_L_GOT64_LO12        B_R_L_GOT_ABS_0_SK12 *5
>>>B_R_L_GOT64_HI20        B_R_L_GOT_ABS_12_SJ20
>>>B_R_L_GOT64_LO20        B_R_L_GOT_ABS_32_SJ20
>>>B_R_L_GOT64_HI12        B_R_L_GOT_ABS_52_SK12


>>>B_R_L_TLS_LE_LO12       B_R_L_TLS_LE_ABS_0_SK12
>>>B_R_L_TLS_LE_HI20       B_R_L_TLS_LE_ABS_12_SJ20
>>>B_R_L_TLS_LE64_LO20     B_R_L_TLS_LE_ABS_32_SJ20
>>>B_R_L_TLS_LE64_HI12     B_R_L_TLS_LE_ABS_52_SK12
>>>B_R_L_TLS_IE_PC_LO12    B_R_L_TLS_IE_PCALA_0_SK12
>>>B_R_L_TLS_IE_PC_HI20    B_R_L_TLS_IE_PCALA_12_SJ20
>>>B_R_L_TLS_IE64_PC_LO20  B_R_L_TLS_IE_PCALA_32_SJ20
>>>B_R_L_TLS_IE64_PC_HI12  B_R_L_TLS_IE_PCALA_52_SK12
>>>B_R_L_TLS_IE64_LO12     B_R_L_TLS_IE_ABS_0_SK12
>>>B_R_L_TLS_IE64_HI20     B_R_L_TLS_IE_ABS_12_SJ20
>>>B_R_L_TLS_IE64_LO20     B_R_L_TLS_IE_ABS_32_SJ20
>>>B_R_L_TLS_IE64_HI12     B_R_L_TLS_IE_ABS_52_SK12
>>>B_R_L_TLS_LD_PC_HI20    B_R_L_TLS_LD_PCALA_12_SJ20 *6
>>>B_R_L_TLS_LD64_HI20     B_R_L_TLS_LD_ABS_12_SJ20
>>>B_R_L_TLS_GD_PC_HI20    B_R_L_TLS_GD_PCALA_12_SJ20
>>>B_R_L_TLS_GD64_HI20     B_R_L_TLS_GD_ABS_12_SJ20

aarch64 relocation types are well named. It's obvious what suppress
overflow checking.

For LO12, I expect that there are two variants: one with overflow check,
the other without.

>>It's overall better, but those "J, K" etc are cryptic IMHO.  And for
>>"B_R_L_B16" I think "B_R_L_PCREL_SK16" fails to express that the offset
>>should be shifted right by 2, so I'd keep B_R_L_B16 (and similarly,
>>B_R_L_B21 and B_R_L_B26) like the PCALA case.
>>
>The slot names come from 
>https://github.com/loongson/LoongArch-Documentation/pull/56 (to 
>non-Chinese speakers: English translation still TODO, but hopefully at 
>least the ABNF and the few tables should be intelligible even without 
>translation).
>
>As for the PCREL and implicit shifts, maybe a planned extension of the 
>slot syntax could help. I plan to submit an Assembly Language 
>Convention after the Instruction Format Convention gets reviewed and 
>merged, and with this new convention such an extension is necessary 
>anyway for accommodating the current assembly syntax as described by 
>the ISA manual, able to express the <<2's and +1's for the 
>PC-manipulating and ALSL insns.
>
>For example, let's say the extension works like this: ordinary slot 
>syntax, plus "p", plus an postprocess operator, with "s\d+" for "imm 
>slot = assembly operand >> N", and "p\d+" for "imm slot = assembly 
>operand + N". Then we could say "B_R_L_PCREL_SK16PS2" and have all the 
>niceties. (In an ideal world, the LoongArch opcodes implementation 
>should be modified to use this convention too, so for example it will 
>be something like "DJSk16ps2" for JIRL, "JDSk16ps2" for BLT (notice 
>the reversed operand order) and "DJKUa2pp1" for ALSL insns.
>