This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH, v2] Fixup test names starting with uppercase
- From: Luis Machado <lgustavo at codesourcery dot com>
- To: <gdb-patches at sourceware dot org>
- Date: Fri, 11 Nov 2016 23:53:04 -0600
- Subject: [PATCH, v2] Fixup test names starting with uppercase
- Authentication-results: sourceware.org; auth=none
This fixes the offender testcases that have test names starting with
uppercase.
I also tried to catch cases where we set the test names via variables.
We should probably adopt a policy and stick with it. If the way to go is
all lowercase, then the following patch should hopefully help clean some
of the inconsistencies up. Otherwise, we should go the other way and adjust
the test names to start with uppercase.
There is also the question about capitalization of architecture names,
technology names (UST, TE) and language names (Pascal/Python/Rust).
Overall a fairly mechanical and tedious change done with:
sed -e "s/\(xfail\|kfail\|kpass\|fail\|pass\|unsupported\|untested\|set test\|set testname\) \"[A-Z]\(\-\|'\|\+\|[A-Za-z0-9]\)\+ /\L&/
Updates to v2:
* Added a few more bits to the regular expression to catch cases of the
following:
"Can't ..."
"Couldn't ..."
"Non-stop ..."
"C++"
Thoughts?
gdb/testsuite/ChangeLog:
2016-11-11 Luis Machado <lgustavo@codesourcery.com>
Force testnames to start with lowercase throughout all the files below.
* gdb/testsuite/gdb.ada/array_return.exp
* gdb/testsuite/gdb.ada/catch_ex.exp
* gdb/testsuite/gdb.ada/info_exc.exp
* gdb/testsuite/gdb.ada/mi_catch_ex.exp
* gdb/testsuite/gdb.ada/mi_dyn_arr.exp
* gdb/testsuite/gdb.ada/mi_ex_cond.exp
* gdb/testsuite/gdb.ada/mi_exc_info.exp
* gdb/testsuite/gdb.ada/mi_interface.exp
* gdb/testsuite/gdb.ada/mi_task_arg.exp
* gdb/testsuite/gdb.ada/mi_task_info.exp
* gdb/testsuite/gdb.ada/mi_var_array.exp
* gdb/testsuite/gdb.arch/alpha-step.exp
* gdb/testsuite/gdb.arch/altivec-abi.exp
* gdb/testsuite/gdb.arch/amd64-disp-step.exp
* gdb/testsuite/gdb.arch/arm-disp-step.exp
* gdb/testsuite/gdb.arch/arm-neon.exp
* gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
* gdb/testsuite/gdb.arch/e500-prologue.exp
* gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
* gdb/testsuite/gdb.arch/gdb1558.exp
* gdb/testsuite/gdb.arch/i386-bp_permanent.exp
* gdb/testsuite/gdb.arch/i386-disp-step.exp
* gdb/testsuite/gdb.arch/i386-float.exp
* gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
* gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp
* gdb/testsuite/gdb.arch/mips16-thunks.exp
* gdb/testsuite/gdb.arch/pa-nullify.exp
* gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
* gdb/testsuite/gdb.arch/powerpc-power.exp
* gdb/testsuite/gdb.arch/powerpc-prologue.exp
* gdb/testsuite/gdb.arch/ppc-dfp.exp
* gdb/testsuite/gdb.arch/ppc-fp.exp
* gdb/testsuite/gdb.arch/s390-multiarch.exp
* gdb/testsuite/gdb.arch/s390-tdbregs.exp
* gdb/testsuite/gdb.arch/spu-info.exp
* gdb/testsuite/gdb.arch/spu-ls.exp
* gdb/testsuite/gdb.arch/thumb-bx-pc.exp
* gdb/testsuite/gdb.arch/thumb-prologue.exp
* gdb/testsuite/gdb.base/advance.exp
* gdb/testsuite/gdb.base/annota-input-while-running.exp
* gdb/testsuite/gdb.base/arrayidx.exp
* gdb/testsuite/gdb.base/asmlabel.exp
* gdb/testsuite/gdb.base/async.exp
* gdb/testsuite/gdb.base/attach-wait-input.exp
* gdb/testsuite/gdb.base/auto-connect-native-target.exp
* gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
* gdb/testsuite/gdb.base/bfp-test.exp
* gdb/testsuite/gdb.base/bigcore.exp
* gdb/testsuite/gdb.base/bp-permanent.exp
* gdb/testsuite/gdb.base/break-always.exp
* gdb/testsuite/gdb.base/break-fun-addr.exp
* gdb/testsuite/gdb.base/break-idempotent.exp
* gdb/testsuite/gdb.base/break-main-file-remove-fail.exp
* gdb/testsuite/gdb.base/break-probes.exp
* gdb/testsuite/gdb.base/break-unload-file.exp
* gdb/testsuite/gdb.base/break.exp
* gdb/testsuite/gdb.base/call-ar-st.exp
* gdb/testsuite/gdb.base/call-rt-st.exp
* gdb/testsuite/gdb.base/call-sc.exp
* gdb/testsuite/gdb.base/call-signal-resume.exp
* gdb/testsuite/gdb.base/call-strs.exp
* gdb/testsuite/gdb.base/callexit.exp
* gdb/testsuite/gdb.base/callfuncs.exp
* gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp
* gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp
* gdb/testsuite/gdb.base/catch-syscall.exp
* gdb/testsuite/gdb.base/compare-sections.exp
* gdb/testsuite/gdb.base/cond-eval-mode.exp
* gdb/testsuite/gdb.base/condbreak-call-false.exp
* gdb/testsuite/gdb.base/consecutive-step-over.exp
* gdb/testsuite/gdb.base/cursal.exp
* gdb/testsuite/gdb.base/disabled-location.exp
* gdb/testsuite/gdb.base/disasm-end-cu.exp
* gdb/testsuite/gdb.base/display.exp
* gdb/testsuite/gdb.base/double-prompt-target-event-error.exp
* gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp
* gdb/testsuite/gdb.base/dprintf-detach.exp
* gdb/testsuite/gdb.base/dprintf-next.exp
* gdb/testsuite/gdb.base/dprintf-non-stop.exp
* gdb/testsuite/gdb.base/dprintf-pending.exp
* gdb/testsuite/gdb.base/dso2dso.exp
* gdb/testsuite/gdb.base/ending-run.exp
* gdb/testsuite/gdb.base/enum_cond.exp
* gdb/testsuite/gdb.base/examine-backward.exp
* gdb/testsuite/gdb.base/exe-lock.exp
* gdb/testsuite/gdb.base/exec-invalid-sysroot.exp
* gdb/testsuite/gdb.base/execl-update-breakpoints.exp
* gdb/testsuite/gdb.base/execution-termios.exp
* gdb/testsuite/gdb.base/fileio.exp
* gdb/testsuite/gdb.base/fixsection.exp
* gdb/testsuite/gdb.base/foll-exec-mode.exp
* gdb/testsuite/gdb.base/foll-exec.exp
* gdb/testsuite/gdb.base/fork-running-state.exp
* gdb/testsuite/gdb.base/frame-args.exp
* gdb/testsuite/gdb.base/fullpath-expand.exp
* gdb/testsuite/gdb.base/func-ptr.exp
* gdb/testsuite/gdb.base/gcore-relro-pie.exp
* gdb/testsuite/gdb.base/gdb1090.exp
* gdb/testsuite/gdb.base/gdb1555.exp
* gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
* gdb/testsuite/gdb.base/gnu-debugdata.exp
* gdb/testsuite/gdb.base/gnu-ifunc.exp
* gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
* gdb/testsuite/gdb.base/hbreak-unmapped.exp
* gdb/testsuite/gdb.base/hook-stop.exp
* gdb/testsuite/gdb.base/infcall-input.exp
* gdb/testsuite/gdb.base/info-fun.exp
* gdb/testsuite/gdb.base/info-shared.exp
* gdb/testsuite/gdb.base/interrupt-noterm.exp
* gdb/testsuite/gdb.base/jit-so.exp
* gdb/testsuite/gdb.base/jit.exp
* gdb/testsuite/gdb.base/line-symtabs.exp
* gdb/testsuite/gdb.base/list.exp
* gdb/testsuite/gdb.base/longjmp.exp
* gdb/testsuite/gdb.base/macscp.exp
* gdb/testsuite/gdb.base/max-value-size.exp
* gdb/testsuite/gdb.base/nodebug.exp
* gdb/testsuite/gdb.base/nofield.exp
* gdb/testsuite/gdb.base/overlays.exp
* gdb/testsuite/gdb.base/paginate-after-ctrl-c-running.exp
* gdb/testsuite/gdb.base/paginate-bg-execution.exp
* gdb/testsuite/gdb.base/paginate-inferior-exit.exp
* gdb/testsuite/gdb.base/pending.exp
* gdb/testsuite/gdb.base/pr11022.exp
* gdb/testsuite/gdb.base/printcmds.exp
* gdb/testsuite/gdb.base/ptr-typedef.exp
* gdb/testsuite/gdb.base/ptype.exp
* gdb/testsuite/gdb.base/randomize.exp
* gdb/testsuite/gdb.base/range-stepping.exp
* gdb/testsuite/gdb.base/realname-expand.exp
* gdb/testsuite/gdb.base/relativedebug.exp
* gdb/testsuite/gdb.base/remote.exp
* gdb/testsuite/gdb.base/savedregs.exp
* gdb/testsuite/gdb.base/sepdebug.exp
* gdb/testsuite/gdb.base/set-noassign.exp
* gdb/testsuite/gdb.base/shlib-call.exp
* gdb/testsuite/gdb.base/shreloc.exp
* gdb/testsuite/gdb.base/sigaltstack.exp
* gdb/testsuite/gdb.base/sigbpt.exp
* gdb/testsuite/gdb.base/siginfo-addr.exp
* gdb/testsuite/gdb.base/siginfo-obj.exp
* gdb/testsuite/gdb.base/siginfo-thread.exp
* gdb/testsuite/gdb.base/signest.exp
* gdb/testsuite/gdb.base/signull.exp
* gdb/testsuite/gdb.base/sigrepeat.exp
* gdb/testsuite/gdb.base/skip.exp
* gdb/testsuite/gdb.base/so-impl-ld.exp
* gdb/testsuite/gdb.base/solib-corrupted.exp
* gdb/testsuite/gdb.base/solib-disc.exp
* gdb/testsuite/gdb.base/solib-display.exp
* gdb/testsuite/gdb.base/solib-overlap.exp
* gdb/testsuite/gdb.base/solib-search.exp
* gdb/testsuite/gdb.base/solib-symbol.exp
* gdb/testsuite/gdb.base/source-execution.exp
* gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp
* gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp
* gdb/testsuite/gdb.base/stack-checking.exp
* gdb/testsuite/gdb.base/stale-infcall.exp
* gdb/testsuite/gdb.base/step-break.exp
* gdb/testsuite/gdb.base/step-line.exp
* gdb/testsuite/gdb.base/step-over-exit.exp
* gdb/testsuite/gdb.base/step-test.exp
* gdb/testsuite/gdb.base/structs.exp
* gdb/testsuite/gdb.base/sym-file.exp
* gdb/testsuite/gdb.base/symtab-search-order.exp
* gdb/testsuite/gdb.base/term.exp
* gdb/testsuite/gdb.base/type-opaque.exp
* gdb/testsuite/gdb.base/unload.exp
* gdb/testsuite/gdb.base/until-nodebug.exp
* gdb/testsuite/gdb.base/until.exp
* gdb/testsuite/gdb.base/unwindonsignal.exp
* gdb/testsuite/gdb.base/watch-cond.exp
* gdb/testsuite/gdb.base/watch-non-mem.exp
* gdb/testsuite/gdb.base/watch_thread_num.exp
* gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp
* gdb/testsuite/gdb.base/watchpoint-solib.exp
* gdb/testsuite/gdb.base/watchpoint.exp
* gdb/testsuite/gdb.btrace/dlopen.exp
* gdb/testsuite/gdb.cell/arch.exp
* gdb/testsuite/gdb.cell/break.exp
* gdb/testsuite/gdb.cell/bt.exp
* gdb/testsuite/gdb.cell/core.exp
* gdb/testsuite/gdb.cell/data.exp
* gdb/testsuite/gdb.cell/dwarfaddr.exp
* gdb/testsuite/gdb.cell/ea-cache.exp
* gdb/testsuite/gdb.cell/ea-standalone.exp
* gdb/testsuite/gdb.cell/ea-test.exp
* gdb/testsuite/gdb.cell/f-regs.exp
* gdb/testsuite/gdb.cell/fork.exp
* gdb/testsuite/gdb.cell/gcore.exp
* gdb/testsuite/gdb.cell/mem-access.exp
* gdb/testsuite/gdb.cell/ptype.exp
* gdb/testsuite/gdb.cell/registers.exp
* gdb/testsuite/gdb.cell/sizeof.exp
* gdb/testsuite/gdb.cell/solib-symbol.exp
* gdb/testsuite/gdb.cell/solib.exp
* gdb/testsuite/gdb.compile/compile-tls.exp
* gdb/testsuite/gdb.cp/exception.exp
* gdb/testsuite/gdb.cp/gdb2495.exp
* gdb/testsuite/gdb.cp/local.exp
* gdb/testsuite/gdb.cp/mb-inline.exp
* gdb/testsuite/gdb.cp/mb-templates.exp
* gdb/testsuite/gdb.cp/pr10687.exp
* gdb/testsuite/gdb.cp/pr9167.exp
* gdb/testsuite/gdb.cp/cp-relocate.exp
* gdb/testsuite/gdb.cp/scope-err.exp
* gdb/testsuite/gdb.cp/templates.exp
* gdb/testsuite/gdb.cp/virtfunc.exp
* gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
* gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
* gdb/testsuite/gdb.fortran/complex.exp
* gdb/testsuite/gdb.fortran/library-module.exp
* gdb/testsuite/gdb.guile/guile.exp
* gdb/testsuite/gdb.guile/scm-cmd.exp
* gdb/testsuite/gdb.guile/scm-frame-inline.exp
* gdb/testsuite/gdb.guile/scm-objfile.exp
* gdb/testsuite/gdb.guile/scm-pretty-print.exp
* gdb/testsuite/gdb.guile/scm-symbol.exp
* gdb/testsuite/gdb.guile/scm-type.exp
* gdb/testsuite/gdb.guile/scm-value.exp
* gdb/testsuite/gdb.linespec/keywords.exp
* gdb/testsuite/gdb.linespec/ls-errs.exp
* gdb/testsuite/gdb.linespec/macro-relative.exp
* gdb/testsuite/gdb.linespec/thread.exp
* gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
* gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
* gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
* gdb/testsuite/gdb.mi/mi-logging.exp
* gdb/testsuite/gdb.mi/mi-pending.exp
* gdb/testsuite/gdb.mi/mi-solib.exp
* gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
* gdb/testsuite/gdb.mi/user-selected-context-sync.exp
* gdb/testsuite/gdb.multi/dummy-frame-restore.exp
* gdb/testsuite/gdb.multi/multi-arch-exec.exp
* gdb/testsuite/gdb.multi/multi-arch.exp
* gdb/testsuite/gdb.multi/remove-inferiors.exp
* gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp
* gdb/testsuite/gdb.opt/solib-intra-step.exp
* gdb/testsuite/gdb.perf/backtrace.exp
* gdb/testsuite/gdb.perf/single-step.exp
* gdb/testsuite/gdb.perf/skip-command.exp
* gdb/testsuite/gdb.perf/skip-prologue.exp
* gdb/testsuite/gdb.perf/solib.exp
* gdb/testsuite/gdb.python/lib-types.exp
* gdb/testsuite/gdb.python/py-as-string.exp
* gdb/testsuite/gdb.python/py-bad-printers.exp
* gdb/testsuite/gdb.python/py-block.exp
* gdb/testsuite/gdb.python/py-breakpoint.exp
* gdb/testsuite/gdb.python/py-cmd.exp
* gdb/testsuite/gdb.python/py-events.exp
* gdb/testsuite/gdb.python/py-evthreads.exp
* gdb/testsuite/gdb.python/py-finish-breakpoint.exp
* gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
* gdb/testsuite/gdb.python/py-frame-inline.exp
* gdb/testsuite/gdb.python/py-frame.exp
* gdb/testsuite/gdb.python/py-inferior.exp
* gdb/testsuite/gdb.python/py-infthread.exp
* gdb/testsuite/gdb.python/py-mi.exp
* gdb/testsuite/gdb.python/py-objfile.exp
* gdb/testsuite/gdb.python/py-pp-maint.exp
* gdb/testsuite/gdb.python/py-pp-registration.exp
* gdb/testsuite/gdb.python/py-prettyprint.exp
* gdb/testsuite/gdb.python/py-recurse-unwind.exp
* gdb/testsuite/gdb.python/py-shared.exp
* gdb/testsuite/gdb.python/py-symbol.exp
* gdb/testsuite/gdb.python/py-symtab.exp
* gdb/testsuite/gdb.python/py-template.exp
* gdb/testsuite/gdb.python/py-type.exp
* gdb/testsuite/gdb.python/py-unwind-maint.exp
* gdb/testsuite/gdb.python/py-unwind.exp
* gdb/testsuite/gdb.python/py-value.exp
* gdb/testsuite/gdb.python/python.exp
* gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
* gdb/testsuite/gdb.reverse/insn-reverse.exp
* gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
* gdb/testsuite/gdb.reverse/solib-precsave.exp
* gdb/testsuite/gdb.reverse/solib-reverse.exp
* gdb/testsuite/gdb.stabs/gdb11479.exp
* gdb/testsuite/gdb.stabs/weird.exp
* gdb/testsuite/gdb.threads/fork-child-threads.exp
* gdb/testsuite/gdb.threads/fork-plus-threads.exp
* gdb/testsuite/gdb.threads/fork-thread-pending.exp
* gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp
* gdb/testsuite/gdb.threads/hand-call-in-threads.exp
* gdb/testsuite/gdb.threads/interrupted-hand-call.exp
* gdb/testsuite/gdb.threads/killed.exp
* gdb/testsuite/gdb.threads/linux-dp.exp
* gdb/testsuite/gdb.threads/local-watch-wrong-thread.exp
* gdb/testsuite/gdb.threads/manythreads.exp
* gdb/testsuite/gdb.threads/next-while-other-thread-longjmps.exp
* gdb/testsuite/gdb.threads/non-ldr-exit.exp
* gdb/testsuite/gdb.threads/pending-step.exp
* gdb/testsuite/gdb.threads/print-threads.exp
* gdb/testsuite/gdb.threads/process-dies-while-detaching.exp
* gdb/testsuite/gdb.threads/process-dies-while-handling-bp.exp
* gdb/testsuite/gdb.threads/pthreads.exp
* gdb/testsuite/gdb.threads/queue-signal.exp
* gdb/testsuite/gdb.threads/reconnect-signal.exp
* gdb/testsuite/gdb.threads/signal-command-handle-nopass.exp
* gdb/testsuite/gdb.threads/signal-command-multiple-signals-pending.exp
* gdb/testsuite/gdb.threads/signal-delivered-right-thread.exp
* gdb/testsuite/gdb.threads/signal-sigtrap.exp
* gdb/testsuite/gdb.threads/sigthread.exp
* gdb/testsuite/gdb.threads/staticthreads.exp
* gdb/testsuite/gdb.threads/stepi-random-signal.exp
* gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
* gdb/testsuite/gdb.threads/thread_check.exp
* gdb/testsuite/gdb.threads/thread_events.exp
* gdb/testsuite/gdb.threads/tid-reuse.exp
* gdb/testsuite/gdb.threads/tls-nodebug.exp
* gdb/testsuite/gdb.threads/tls-shared.exp
* gdb/testsuite/gdb.threads/tls-so_extern.exp
* gdb/testsuite/gdb.threads/tls.exp
* gdb/testsuite/gdb.threads/wp-replication.exp
* gdb/testsuite/gdb.trace/actions-changed.exp
* gdb/testsuite/gdb.trace/actions.exp
* gdb/testsuite/gdb.trace/backtrace.exp
* gdb/testsuite/gdb.trace/change-loc.exp
* gdb/testsuite/gdb.trace/collection.exp
* gdb/testsuite/gdb.trace/deltrace.exp
* gdb/testsuite/gdb.trace/disconnected-tracing.exp
* gdb/testsuite/gdb.trace/entry-values.exp
* gdb/testsuite/gdb.trace/ftrace-lock.exp
* gdb/testsuite/gdb.trace/ftrace.exp
* gdb/testsuite/gdb.trace/infotrace.exp
* gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
* gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
* gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
* gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
* gdb/testsuite/gdb.trace/mi-tsv-changed.exp
* gdb/testsuite/gdb.trace/no-attach-trace.exp
* gdb/testsuite/gdb.trace/packetlen.exp
* gdb/testsuite/gdb.trace/passc-dyn.exp
* gdb/testsuite/gdb.trace/passcount.exp
* gdb/testsuite/gdb.trace/pending.exp
* gdb/testsuite/gdb.trace/pr16508.exp
* gdb/testsuite/gdb.trace/qtro.exp
* gdb/testsuite/gdb.trace/range-stepping.exp
* gdb/testsuite/gdb.trace/read-memory.exp
* gdb/testsuite/gdb.trace/report.exp
* gdb/testsuite/gdb.trace/save-trace.exp
* gdb/testsuite/gdb.trace/signal.exp
* gdb/testsuite/gdb.trace/stap-trace.exp
* gdb/testsuite/gdb.trace/status-stop.exp
* gdb/testsuite/gdb.trace/strace.exp
* gdb/testsuite/gdb.trace/tfile.exp
* gdb/testsuite/gdb.trace/tfind.exp
* gdb/testsuite/gdb.trace/trace-break.exp
* gdb/testsuite/gdb.trace/trace-condition.exp
* gdb/testsuite/gdb.trace/trace-enable-disable.exp
* gdb/testsuite/gdb.trace/trace-mt.exp
* gdb/testsuite/gdb.trace/tracecmd.exp
* gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp
* gdb/testsuite/gdb.trace/tspeed.exp
* gdb/testsuite/gdb.trace/tstatus.exp
* gdb/testsuite/gdb.trace/tsv.exp
* gdb/testsuite/gdb.trace/unavailable.exp
* gdb/testsuite/gdb.trace/while-dyn.exp
* gdb/testsuite/gdb.trace/while-stepping.exp
* gdb/testsuite/lib/gdb-guile.exp
* gdb/testsuite/lib/gdb.exp
* gdb/testsuite/lib/mi-support.exp
* gdb/testsuite/lib/pascal.exp
* gdb/testsuite/lib/perftest.exp
* gdb/testsuite/lib/prelink-support.exp
* gdb/testsuite/lib/prompt.exp
* gdb/testsuite/lib/selftest-support.exp
---
gdb/testsuite/gdb.ada/array_return.exp | 2 +-
gdb/testsuite/gdb.ada/catch_ex.exp | 6 +++---
gdb/testsuite/gdb.ada/info_exc.exp | 2 +-
gdb/testsuite/gdb.ada/mi_catch_ex.exp | 6 +++---
gdb/testsuite/gdb.ada/mi_dyn_arr.exp | 2 +-
gdb/testsuite/gdb.ada/mi_ex_cond.exp | 2 +-
gdb/testsuite/gdb.ada/mi_exc_info.exp | 2 +-
gdb/testsuite/gdb.ada/mi_interface.exp | 2 +-
gdb/testsuite/gdb.ada/mi_task_arg.exp | 2 +-
gdb/testsuite/gdb.ada/mi_task_info.exp | 2 +-
gdb/testsuite/gdb.ada/mi_var_array.exp | 2 +-
gdb/testsuite/gdb.arch/alpha-step.exp | 4 ++--
gdb/testsuite/gdb.arch/altivec-abi.exp | 2 +-
gdb/testsuite/gdb.arch/amd64-disp-step.exp | 2 +-
gdb/testsuite/gdb.arch/arm-disp-step.exp | 2 +-
gdb/testsuite/gdb.arch/arm-neon.exp | 2 +-
gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp | 4 ++--
gdb/testsuite/gdb.arch/e500-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp | 8 ++++----
gdb/testsuite/gdb.arch/gdb1558.exp | 2 +-
gdb/testsuite/gdb.arch/i386-bp_permanent.exp | 2 +-
gdb/testsuite/gdb.arch/i386-disp-step.exp | 2 +-
gdb/testsuite/gdb.arch/i386-float.exp | 2 +-
gdb/testsuite/gdb.arch/i386-gnu-cfi.exp | 6 +++---
gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp | 2 +-
gdb/testsuite/gdb.arch/mips16-thunks.exp | 10 +++++-----
gdb/testsuite/gdb.arch/pa-nullify.exp | 2 +-
gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/powerpc-power.exp | 4 ++--
gdb/testsuite/gdb.arch/powerpc-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/ppc-dfp.exp | 4 ++--
gdb/testsuite/gdb.arch/ppc-fp.exp | 2 +-
gdb/testsuite/gdb.arch/s390-multiarch.exp | 2 +-
gdb/testsuite/gdb.arch/s390-tdbregs.exp | 6 +++---
gdb/testsuite/gdb.arch/spu-info.exp | 2 +-
gdb/testsuite/gdb.arch/spu-ls.exp | 2 +-
gdb/testsuite/gdb.arch/thumb-bx-pc.exp | 2 +-
gdb/testsuite/gdb.arch/thumb-prologue.exp | 4 ++--
gdb/testsuite/gdb.base/advance.exp | 2 +-
.../gdb.base/annota-input-while-running.exp | 2 +-
gdb/testsuite/gdb.base/arrayidx.exp | 2 +-
gdb/testsuite/gdb.base/asmlabel.exp | 2 +-
gdb/testsuite/gdb.base/async.exp | 2 +-
gdb/testsuite/gdb.base/attach-wait-input.exp | 2 +-
.../gdb.base/auto-connect-native-target.exp | 8 ++++----
.../gdb.base/batch-preserve-term-settings.exp | 2 +-
gdb/testsuite/gdb.base/bfp-test.exp | 2 +-
gdb/testsuite/gdb.base/bigcore.exp | 6 +++---
gdb/testsuite/gdb.base/bp-permanent.exp | 2 +-
gdb/testsuite/gdb.base/break-always.exp | 2 +-
gdb/testsuite/gdb.base/break-fun-addr.exp | 4 ++--
gdb/testsuite/gdb.base/break-idempotent.exp | 4 ++--
.../gdb.base/break-main-file-remove-fail.exp | 2 +-
gdb/testsuite/gdb.base/break-probes.exp | 2 +-
gdb/testsuite/gdb.base/break-unload-file.exp | 2 +-
gdb/testsuite/gdb.base/break.exp | 8 ++++----
gdb/testsuite/gdb.base/call-ar-st.exp | 2 +-
gdb/testsuite/gdb.base/call-rt-st.exp | 2 +-
gdb/testsuite/gdb.base/call-sc.exp | 2 +-
gdb/testsuite/gdb.base/call-signal-resume.exp | 4 ++--
gdb/testsuite/gdb.base/call-strs.exp | 2 +-
gdb/testsuite/gdb.base/callexit.exp | 4 ++--
gdb/testsuite/gdb.base/callfuncs.exp | 2 +-
gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp | 2 +-
gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp | 2 +-
gdb/testsuite/gdb.base/catch-syscall.exp | 2 +-
gdb/testsuite/gdb.base/compare-sections.exp | 2 +-
gdb/testsuite/gdb.base/cond-eval-mode.exp | 2 +-
gdb/testsuite/gdb.base/condbreak-call-false.exp | 2 +-
gdb/testsuite/gdb.base/consecutive-step-over.exp | 2 +-
gdb/testsuite/gdb.base/cursal.exp | 2 +-
gdb/testsuite/gdb.base/disabled-location.exp | 2 +-
gdb/testsuite/gdb.base/disasm-end-cu.exp | 8 ++++----
gdb/testsuite/gdb.base/display.exp | 2 +-
.../gdb.base/double-prompt-target-event-error.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-detach.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-next.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-non-stop.exp | 4 ++--
gdb/testsuite/gdb.base/dprintf-pending.exp | 2 +-
gdb/testsuite/gdb.base/dso2dso.exp | 4 ++--
gdb/testsuite/gdb.base/ending-run.exp | 2 +-
gdb/testsuite/gdb.base/enum_cond.exp | 2 +-
gdb/testsuite/gdb.base/examine-backward.exp | 2 +-
gdb/testsuite/gdb.base/exe-lock.exp | 2 +-
gdb/testsuite/gdb.base/exec-invalid-sysroot.exp | 2 +-
gdb/testsuite/gdb.base/execl-update-breakpoints.exp | 6 +++---
gdb/testsuite/gdb.base/execution-termios.exp | 2 +-
gdb/testsuite/gdb.base/fileio.exp | 2 +-
gdb/testsuite/gdb.base/fixsection.exp | 4 ++--
gdb/testsuite/gdb.base/foll-exec-mode.exp | 4 ++--
gdb/testsuite/gdb.base/foll-exec.exp | 12 ++++++------
gdb/testsuite/gdb.base/fork-running-state.exp | 2 +-
gdb/testsuite/gdb.base/frame-args.exp | 2 +-
gdb/testsuite/gdb.base/fullpath-expand.exp | 2 +-
gdb/testsuite/gdb.base/func-ptr.exp | 2 +-
gdb/testsuite/gdb.base/gcore-relro-pie.exp | 2 +-
gdb/testsuite/gdb.base/gdb1090.exp | 2 +-
gdb/testsuite/gdb.base/gdb1555.exp | 2 +-
gdb/testsuite/gdb.base/global-var-nested-by-dso.exp | 4 ++--
gdb/testsuite/gdb.base/gnu-debugdata.exp | 2 +-
gdb/testsuite/gdb.base/gnu-ifunc.exp | 6 +++---
gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp | 4 ++--
gdb/testsuite/gdb.base/hbreak-unmapped.exp | 4 ++--
gdb/testsuite/gdb.base/hook-stop.exp | 2 +-
gdb/testsuite/gdb.base/infcall-input.exp | 2 +-
gdb/testsuite/gdb.base/info-fun.exp | 6 +++---
gdb/testsuite/gdb.base/info-shared.exp | 4 ++--
gdb/testsuite/gdb.base/interrupt-noterm.exp | 2 +-
gdb/testsuite/gdb.base/jit-so.exp | 2 +-
gdb/testsuite/gdb.base/jit.exp | 2 +-
gdb/testsuite/gdb.base/line-symtabs.exp | 2 +-
gdb/testsuite/gdb.base/list.exp | 2 +-
gdb/testsuite/gdb.base/longjmp.exp | 2 +-
gdb/testsuite/gdb.base/macscp.exp | 2 +-
gdb/testsuite/gdb.base/max-value-size.exp | 2 +-
gdb/testsuite/gdb.base/nodebug.exp | 2 +-
gdb/testsuite/gdb.base/nofield.exp | 2 +-
gdb/testsuite/gdb.base/overlays.exp | 2 +-
.../gdb.base/paginate-after-ctrl-c-running.exp | 2 +-
gdb/testsuite/gdb.base/paginate-bg-execution.exp | 4 ++--
gdb/testsuite/gdb.base/paginate-inferior-exit.exp | 2 +-
gdb/testsuite/gdb.base/pending.exp | 2 +-
gdb/testsuite/gdb.base/pr11022.exp | 2 +-
gdb/testsuite/gdb.base/printcmds.exp | 6 +++---
gdb/testsuite/gdb.base/ptr-typedef.exp | 4 ++--
gdb/testsuite/gdb.base/ptype.exp | 2 +-
gdb/testsuite/gdb.base/randomize.exp | 6 +++---
gdb/testsuite/gdb.base/range-stepping.exp | 2 +-
gdb/testsuite/gdb.base/realname-expand.exp | 2 +-
gdb/testsuite/gdb.base/relativedebug.exp | 2 +-
gdb/testsuite/gdb.base/remote.exp | 2 +-
gdb/testsuite/gdb.base/savedregs.exp | 4 ++--
gdb/testsuite/gdb.base/sepdebug.exp | 4 ++--
gdb/testsuite/gdb.base/set-noassign.exp | 2 +-
gdb/testsuite/gdb.base/shlib-call.exp | 2 +-
gdb/testsuite/gdb.base/shreloc.exp | 12 ++++++------
gdb/testsuite/gdb.base/sigaltstack.exp | 2 +-
gdb/testsuite/gdb.base/sigbpt.exp | 4 ++--
gdb/testsuite/gdb.base/siginfo-addr.exp | 2 +-
gdb/testsuite/gdb.base/siginfo-obj.exp | 10 +++++-----
gdb/testsuite/gdb.base/siginfo-thread.exp | 8 ++++----
gdb/testsuite/gdb.base/signest.exp | 2 +-
gdb/testsuite/gdb.base/signull.exp | 2 +-
gdb/testsuite/gdb.base/sigrepeat.exp | 2 +-
gdb/testsuite/gdb.base/skip.exp | 20 ++++++++++----------
gdb/testsuite/gdb.base/so-impl-ld.exp | 2 +-
gdb/testsuite/gdb.base/solib-corrupted.exp | 4 ++--
gdb/testsuite/gdb.base/solib-disc.exp | 2 +-
gdb/testsuite/gdb.base/solib-display.exp | 14 +++++++-------
gdb/testsuite/gdb.base/solib-overlap.exp | 6 +++---
gdb/testsuite/gdb.base/solib-search.exp | 6 +++---
gdb/testsuite/gdb.base/solib-symbol.exp | 4 ++--
gdb/testsuite/gdb.base/source-execution.exp | 2 +-
gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp | 2 +-
gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp | 2 +-
gdb/testsuite/gdb.base/stack-checking.exp | 2 +-
gdb/testsuite/gdb.base/stale-infcall.exp | 2 +-
gdb/testsuite/gdb.base/step-break.exp | 2 +-
gdb/testsuite/gdb.base/step-line.exp | 2 +-
gdb/testsuite/gdb.base/step-over-exit.exp | 2 +-
gdb/testsuite/gdb.base/step-test.exp | 2 +-
gdb/testsuite/gdb.base/structs.exp | 2 +-
gdb/testsuite/gdb.base/sym-file.exp | 2 +-
gdb/testsuite/gdb.base/symtab-search-order.exp | 4 ++--
gdb/testsuite/gdb.base/term.exp | 2 +-
gdb/testsuite/gdb.base/type-opaque.exp | 2 +-
gdb/testsuite/gdb.base/unload.exp | 2 +-
gdb/testsuite/gdb.base/until-nodebug.exp | 2 +-
gdb/testsuite/gdb.base/until.exp | 2 +-
gdb/testsuite/gdb.base/unwindonsignal.exp | 4 ++--
gdb/testsuite/gdb.base/watch-cond.exp | 6 +++---
gdb/testsuite/gdb.base/watch-non-mem.exp | 2 +-
gdb/testsuite/gdb.base/watch_thread_num.exp | 2 +-
gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp | 2 +-
gdb/testsuite/gdb.base/watchpoint-solib.exp | 2 +-
gdb/testsuite/gdb.base/watchpoint.exp | 2 +-
gdb/testsuite/gdb.btrace/dlopen.exp | 2 +-
gdb/testsuite/gdb.cell/arch.exp | 14 +++++++-------
gdb/testsuite/gdb.cell/break.exp | 10 +++++-----
gdb/testsuite/gdb.cell/bt.exp | 12 ++++++------
gdb/testsuite/gdb.cell/core.exp | 6 +++---
gdb/testsuite/gdb.cell/data.exp | 8 ++++----
gdb/testsuite/gdb.cell/dwarfaddr.exp | 4 ++--
gdb/testsuite/gdb.cell/ea-cache.exp | 8 ++++----
gdb/testsuite/gdb.cell/ea-standalone.exp | 4 ++--
gdb/testsuite/gdb.cell/ea-test.exp | 4 ++--
gdb/testsuite/gdb.cell/f-regs.exp | 8 ++++----
gdb/testsuite/gdb.cell/fork.exp | 8 ++++----
gdb/testsuite/gdb.cell/gcore.exp | 8 ++++----
gdb/testsuite/gdb.cell/mem-access.exp | 8 ++++----
gdb/testsuite/gdb.cell/ptype.exp | 8 ++++----
gdb/testsuite/gdb.cell/registers.exp | 8 ++++----
gdb/testsuite/gdb.cell/sizeof.exp | 8 ++++----
gdb/testsuite/gdb.cell/solib-symbol.exp | 8 ++++----
gdb/testsuite/gdb.cell/solib.exp | 8 ++++----
gdb/testsuite/gdb.compile/compile-tls.exp | 2 +-
gdb/testsuite/gdb.cp/cp-relocate.exp | 4 ++--
gdb/testsuite/gdb.cp/exception.exp | 2 +-
gdb/testsuite/gdb.cp/gdb2495.exp | 2 +-
gdb/testsuite/gdb.cp/local.exp | 2 +-
gdb/testsuite/gdb.cp/mb-inline.exp | 2 +-
gdb/testsuite/gdb.cp/mb-templates.exp | 2 +-
gdb/testsuite/gdb.cp/pr10687.exp | 2 +-
gdb/testsuite/gdb.cp/pr9167.exp | 2 +-
gdb/testsuite/gdb.cp/scope-err.exp | 2 +-
gdb/testsuite/gdb.cp/templates.exp | 2 +-
gdb/testsuite/gdb.cp/virtfunc.exp | 2 +-
gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp | 2 +-
.../gdb.dwarf2/dw2-single-line-discriminators.exp | 2 +-
gdb/testsuite/gdb.fortran/complex.exp | 2 +-
gdb/testsuite/gdb.fortran/library-module.exp | 4 ++--
gdb/testsuite/gdb.guile/guile.exp | 2 +-
gdb/testsuite/gdb.guile/scm-cmd.exp | 2 +-
gdb/testsuite/gdb.guile/scm-frame-inline.exp | 2 +-
gdb/testsuite/gdb.guile/scm-objfile.exp | 2 +-
gdb/testsuite/gdb.guile/scm-pretty-print.exp | 2 +-
gdb/testsuite/gdb.guile/scm-symbol.exp | 2 +-
gdb/testsuite/gdb.guile/scm-type.exp | 2 +-
gdb/testsuite/gdb.guile/scm-value.exp | 6 +++---
gdb/testsuite/gdb.linespec/keywords.exp | 2 +-
gdb/testsuite/gdb.linespec/ls-errs.exp | 2 +-
gdb/testsuite/gdb.linespec/macro-relative.exp | 2 +-
gdb/testsuite/gdb.linespec/thread.exp | 2 +-
gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-dprintf-pending.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-fullname-deleted.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-logging.exp | 8 ++++----
gdb/testsuite/gdb.mi/mi-pending.exp | 6 +++---
gdb/testsuite/gdb.mi/mi-solib.exp | 4 ++--
gdb/testsuite/gdb.mi/new-ui-mi-sync.exp | 2 +-
gdb/testsuite/gdb.mi/user-selected-context-sync.exp | 2 +-
gdb/testsuite/gdb.multi/dummy-frame-restore.exp | 4 ++--
gdb/testsuite/gdb.multi/multi-arch-exec.exp | 4 ++--
gdb/testsuite/gdb.multi/multi-arch.exp | 2 +-
gdb/testsuite/gdb.multi/remove-inferiors.exp | 2 +-
gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp | 2 +-
gdb/testsuite/gdb.opt/solib-intra-step.exp | 2 +-
gdb/testsuite/gdb.perf/backtrace.exp | 2 +-
gdb/testsuite/gdb.perf/single-step.exp | 2 +-
gdb/testsuite/gdb.perf/skip-command.exp | 2 +-
gdb/testsuite/gdb.perf/skip-prologue.exp | 2 +-
gdb/testsuite/gdb.perf/solib.exp | 2 +-
gdb/testsuite/gdb.python/lib-types.exp | 2 +-
gdb/testsuite/gdb.python/py-as-string.exp | 2 +-
gdb/testsuite/gdb.python/py-bad-printers.exp | 2 +-
gdb/testsuite/gdb.python/py-block.exp | 2 +-
gdb/testsuite/gdb.python/py-breakpoint.exp | 16 ++++++++--------
gdb/testsuite/gdb.python/py-cmd.exp | 2 +-
gdb/testsuite/gdb.python/py-events.exp | 2 +-
gdb/testsuite/gdb.python/py-evthreads.exp | 2 +-
gdb/testsuite/gdb.python/py-finish-breakpoint.exp | 16 ++++++++--------
gdb/testsuite/gdb.python/py-finish-breakpoint2.exp | 2 +-
gdb/testsuite/gdb.python/py-frame-inline.exp | 2 +-
gdb/testsuite/gdb.python/py-frame.exp | 2 +-
gdb/testsuite/gdb.python/py-inferior.exp | 2 +-
gdb/testsuite/gdb.python/py-infthread.exp | 2 +-
gdb/testsuite/gdb.python/py-mi.exp | 2 +-
gdb/testsuite/gdb.python/py-objfile.exp | 4 ++--
gdb/testsuite/gdb.python/py-pp-maint.exp | 2 +-
gdb/testsuite/gdb.python/py-pp-registration.exp | 2 +-
gdb/testsuite/gdb.python/py-prettyprint.exp | 2 +-
gdb/testsuite/gdb.python/py-recurse-unwind.exp | 2 +-
gdb/testsuite/gdb.python/py-shared.exp | 6 +++---
gdb/testsuite/gdb.python/py-symbol.exp | 8 ++++----
gdb/testsuite/gdb.python/py-symtab.exp | 2 +-
gdb/testsuite/gdb.python/py-template.exp | 2 +-
gdb/testsuite/gdb.python/py-type.exp | 2 +-
gdb/testsuite/gdb.python/py-unwind-maint.exp | 2 +-
gdb/testsuite/gdb.python/py-unwind.exp | 2 +-
gdb/testsuite/gdb.python/py-value.exp | 4 ++--
gdb/testsuite/gdb.python/python.exp | 8 ++++----
gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp | 2 +-
gdb/testsuite/gdb.reverse/insn-reverse.exp | 2 +-
.../gdb.reverse/next-reverse-bkpt-over-sr.exp | 2 +-
gdb/testsuite/gdb.reverse/solib-precsave.exp | 6 +++---
gdb/testsuite/gdb.reverse/solib-reverse.exp | 6 +++---
gdb/testsuite/gdb.stabs/gdb11479.exp | 2 +-
gdb/testsuite/gdb.stabs/weird.exp | 2 +-
gdb/testsuite/gdb.threads/fork-child-threads.exp | 2 +-
gdb/testsuite/gdb.threads/fork-plus-threads.exp | 2 +-
gdb/testsuite/gdb.threads/fork-thread-pending.exp | 4 ++--
.../gdb.threads/forking-threads-plus-breakpoint.exp | 4 ++--
gdb/testsuite/gdb.threads/hand-call-in-threads.exp | 4 ++--
gdb/testsuite/gdb.threads/interrupted-hand-call.exp | 4 ++--
gdb/testsuite/gdb.threads/killed.exp | 4 ++--
gdb/testsuite/gdb.threads/linux-dp.exp | 2 +-
.../gdb.threads/local-watch-wrong-thread.exp | 2 +-
gdb/testsuite/gdb.threads/manythreads.exp | 4 ++--
.../gdb.threads/next-while-other-thread-longjmps.exp | 2 +-
gdb/testsuite/gdb.threads/non-ldr-exit.exp | 2 +-
gdb/testsuite/gdb.threads/pending-step.exp | 2 +-
gdb/testsuite/gdb.threads/print-threads.exp | 8 ++++----
.../gdb.threads/process-dies-while-detaching.exp | 6 +++---
.../gdb.threads/process-dies-while-handling-bp.exp | 2 +-
gdb/testsuite/gdb.threads/pthreads.exp | 6 +++---
gdb/testsuite/gdb.threads/queue-signal.exp | 2 +-
gdb/testsuite/gdb.threads/reconnect-signal.exp | 4 ++--
.../gdb.threads/signal-command-handle-nopass.exp | 2 +-
.../signal-command-multiple-signals-pending.exp | 2 +-
.../gdb.threads/signal-delivered-right-thread.exp | 2 +-
gdb/testsuite/gdb.threads/signal-sigtrap.exp | 2 +-
gdb/testsuite/gdb.threads/sigthread.exp | 2 +-
gdb/testsuite/gdb.threads/staticthreads.exp | 6 +++---
gdb/testsuite/gdb.threads/stepi-random-signal.exp | 2 +-
gdb/testsuite/gdb.threads/thread-unwindonsignal.exp | 4 ++--
gdb/testsuite/gdb.threads/thread_check.exp | 2 +-
gdb/testsuite/gdb.threads/thread_events.exp | 2 +-
gdb/testsuite/gdb.threads/tid-reuse.exp | 2 +-
gdb/testsuite/gdb.threads/tls-nodebug.exp | 2 +-
gdb/testsuite/gdb.threads/tls-shared.exp | 2 +-
gdb/testsuite/gdb.threads/tls-so_extern.exp | 2 +-
gdb/testsuite/gdb.threads/tls.exp | 8 ++++----
gdb/testsuite/gdb.threads/wp-replication.exp | 4 ++--
gdb/testsuite/gdb.trace/actions-changed.exp | 4 ++--
gdb/testsuite/gdb.trace/actions.exp | 4 ++--
gdb/testsuite/gdb.trace/backtrace.exp | 6 +++---
gdb/testsuite/gdb.trace/change-loc.exp | 10 +++++-----
gdb/testsuite/gdb.trace/collection.exp | 2 +-
gdb/testsuite/gdb.trace/deltrace.exp | 2 +-
gdb/testsuite/gdb.trace/disconnected-tracing.exp | 4 ++--
gdb/testsuite/gdb.trace/entry-values.exp | 6 +++---
gdb/testsuite/gdb.trace/ftrace-lock.exp | 10 +++++-----
gdb/testsuite/gdb.trace/ftrace.exp | 6 +++---
gdb/testsuite/gdb.trace/infotrace.exp | 4 ++--
gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp | 4 ++--
gdb/testsuite/gdb.trace/mi-trace-unavailable.exp | 4 ++--
gdb/testsuite/gdb.trace/mi-traceframe-changed.exp | 4 ++--
gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp | 10 +++++-----
gdb/testsuite/gdb.trace/mi-tsv-changed.exp | 10 +++++-----
gdb/testsuite/gdb.trace/no-attach-trace.exp | 4 ++--
gdb/testsuite/gdb.trace/packetlen.exp | 2 +-
gdb/testsuite/gdb.trace/passc-dyn.exp | 4 ++--
gdb/testsuite/gdb.trace/passcount.exp | 2 +-
gdb/testsuite/gdb.trace/pending.exp | 20 ++++++++++----------
gdb/testsuite/gdb.trace/pr16508.exp | 2 +-
gdb/testsuite/gdb.trace/qtro.exp | 4 ++--
gdb/testsuite/gdb.trace/range-stepping.exp | 6 +++---
gdb/testsuite/gdb.trace/read-memory.exp | 4 ++--
gdb/testsuite/gdb.trace/report.exp | 4 ++--
gdb/testsuite/gdb.trace/save-trace.exp | 2 +-
gdb/testsuite/gdb.trace/signal.exp | 4 ++--
gdb/testsuite/gdb.trace/stap-trace.exp | 2 +-
gdb/testsuite/gdb.trace/status-stop.exp | 8 ++++----
gdb/testsuite/gdb.trace/strace.exp | 16 ++++++++--------
gdb/testsuite/gdb.trace/tfile.exp | 2 +-
gdb/testsuite/gdb.trace/tfind.exp | 4 ++--
gdb/testsuite/gdb.trace/trace-break.exp | 18 +++++++++---------
gdb/testsuite/gdb.trace/trace-condition.exp | 8 ++++----
gdb/testsuite/gdb.trace/trace-enable-disable.exp | 8 ++++----
gdb/testsuite/gdb.trace/trace-mt.exp | 12 ++++++------
gdb/testsuite/gdb.trace/tracecmd.exp | 6 +++---
gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp | 2 +-
gdb/testsuite/gdb.trace/tspeed.exp | 2 +-
gdb/testsuite/gdb.trace/tstatus.exp | 2 +-
gdb/testsuite/gdb.trace/tsv.exp | 4 ++--
gdb/testsuite/gdb.trace/unavailable.exp | 2 +-
gdb/testsuite/gdb.trace/while-dyn.exp | 2 +-
gdb/testsuite/gdb.trace/while-stepping.exp | 4 ++--
gdb/testsuite/lib/gdb-guile.exp | 6 +++---
gdb/testsuite/lib/gdb.exp | 12 ++++++------
gdb/testsuite/lib/mi-support.exp | 12 ++++++------
gdb/testsuite/lib/pascal.exp | 4 ++--
gdb/testsuite/lib/perftest.exp | 2 +-
gdb/testsuite/lib/prelink-support.exp | 2 +-
gdb/testsuite/lib/prompt.exp | 4 ++--
gdb/testsuite/lib/selftest-support.exp | 2 +-
367 files changed, 678 insertions(+), 678 deletions(-)
diff --git a/gdb/testsuite/gdb.ada/array_return.exp b/gdb/testsuite/gdb.ada/array_return.exp
index 6e6d35f..f4dae48 100644
--- a/gdb/testsuite/gdb.ada/array_return.exp
+++ b/gdb/testsuite/gdb.ada/array_return.exp
@@ -28,7 +28,7 @@ clean_restart ${testfile}
# Start the inferior
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/catch_ex.exp b/gdb/testsuite/gdb.ada/catch_ex.exp
index 00089a9..5ffcdf1 100644
--- a/gdb/testsuite/gdb.ada/catch_ex.exp
+++ b/gdb/testsuite/gdb.ada/catch_ex.exp
@@ -39,7 +39,7 @@ set catch_exception_info \
####################################
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -88,7 +88,7 @@ gdb_test "continue" \
# - continue, the program exits.
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -149,7 +149,7 @@ gdb_test "continue" \
# the program.
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/info_exc.exp b/gdb/testsuite/gdb.ada/info_exc.exp
index db95aee..e3cfdb5 100644
--- a/gdb/testsuite/gdb.ada/info_exc.exp
+++ b/gdb/testsuite/gdb.ada/info_exc.exp
@@ -24,7 +24,7 @@ if {[gdb_compile_ada "${srcfile}" "${binfile}" executable [list debug]] != "" }
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_catch_ex.exp b/gdb/testsuite/gdb.ada/mi_catch_ex.exp
index 288a065..6ec0609 100644
--- a/gdb/testsuite/gdb.ada/mi_catch_ex.exp
+++ b/gdb/testsuite/gdb.ada/mi_catch_ex.exp
@@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -70,7 +70,7 @@ mi_gdb_load ${binfile}
####################################
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -126,7 +126,7 @@ continue_to_exception \
# - continue, the program exits.
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_dyn_arr.exp b/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
index cf30437..9a7da6e 100644
--- a/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
+++ b/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_ex_cond.exp b/gdb/testsuite/gdb.ada/mi_ex_cond.exp
index 31e039e..a228244 100644
--- a/gdb/testsuite/gdb.ada/mi_ex_cond.exp
+++ b/gdb/testsuite/gdb.ada/mi_ex_cond.exp
@@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_exc_info.exp b/gdb/testsuite/gdb.ada/mi_exc_info.exp
index 8f7434f..6026a3f 100644
--- a/gdb/testsuite/gdb.ada/mi_exc_info.exp
+++ b/gdb/testsuite/gdb.ada/mi_exc_info.exp
@@ -30,7 +30,7 @@ if [mi_gdb_start] {
}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_interface.exp b/gdb/testsuite/gdb.ada/mi_interface.exp
index 6000ec8..764236a 100644
--- a/gdb/testsuite/gdb.ada/mi_interface.exp
+++ b/gdb/testsuite/gdb.ada/mi_interface.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_task_arg.exp b/gdb/testsuite/gdb.ada/mi_task_arg.exp
index ecc29f0..6897936 100644
--- a/gdb/testsuite/gdb.ada/mi_task_arg.exp
+++ b/gdb/testsuite/gdb.ada/mi_task_arg.exp
@@ -37,7 +37,7 @@ mi_gdb_load ${binfile}
mi_gdb_test "-gdb-set debug-file-directory \"\"" ".*"
if ![mi_runto "task_switch.break_me"] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_task_info.exp b/gdb/testsuite/gdb.ada/mi_task_info.exp
index 936d69a..dc82c57 100644
--- a/gdb/testsuite/gdb.ada/mi_task_info.exp
+++ b/gdb/testsuite/gdb.ada/mi_task_info.exp
@@ -38,7 +38,7 @@ mi_gdb_load ${binfile}
####################################
if ![mi_runto "task_switch.break_me"] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_var_array.exp b/gdb/testsuite/gdb.ada/mi_var_array.exp
index c648e7e..3c7073f 100644
--- a/gdb/testsuite/gdb.ada/mi_var_array.exp
+++ b/gdb/testsuite/gdb.ada/mi_var_array.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/alpha-step.exp b/gdb/testsuite/gdb.arch/alpha-step.exp
index 3e681f1..e45ad97 100644
--- a/gdb/testsuite/gdb.arch/alpha-step.exp
+++ b/gdb/testsuite/gdb.arch/alpha-step.exp
@@ -24,7 +24,7 @@ set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
@@ -38,7 +38,7 @@ proc test_stepi {function } {
# of the previous tests, this makes sure that it doesn't affect
# this series of tests.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/altivec-abi.exp b/gdb/testsuite/gdb.arch/altivec-abi.exp
index 3070fab..fb1b0e3 100644
--- a/gdb/testsuite/gdb.arch/altivec-abi.exp
+++ b/gdb/testsuite/gdb.arch/altivec-abi.exp
@@ -50,7 +50,7 @@ proc altivec_abi_tests { extra_flags force_abi } {
set result [catch "exec $readelf_program -A $binfile" output]
if {$result == 0 && ![regexp Tag_GNU_Power_ABI_Vector $output]} {
- untested "ABI not marked"
+ untested "abi not marked"
return
}
}
diff --git a/gdb/testsuite/gdb.arch/amd64-disp-step.exp b/gdb/testsuite/gdb.arch/amd64-disp-step.exp
index 7765546..ba75b46 100644
--- a/gdb/testsuite/gdb.arch/amd64-disp-step.exp
+++ b/gdb/testsuite/gdb.arch/amd64-disp-step.exp
@@ -45,7 +45,7 @@ gdb_test "set displaced-stepping on" ""
gdb_test "show displaced-stepping" ".* displaced stepping .* is on.*"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/arm-disp-step.exp b/gdb/testsuite/gdb.arch/arm-disp-step.exp
index f6bef79..c038551 100644
--- a/gdb/testsuite/gdb.arch/arm-disp-step.exp
+++ b/gdb/testsuite/gdb.arch/arm-disp-step.exp
@@ -413,7 +413,7 @@ proc test_add_rn_pc {} {
gdb_test_no_output "set displaced-stepping off"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/arm-neon.exp b/gdb/testsuite/gdb.arch/arm-neon.exp
index e4612f9..bd0e922 100644
--- a/gdb/testsuite/gdb.arch/arm-neon.exp
+++ b/gdb/testsuite/gdb.arch/arm-neon.exp
@@ -27,7 +27,7 @@ if { [gdb_skip_float_test] } {
standard_testfile
if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} {debug quiet}] } {
- unsupported "ARM NEON is not supported"
+ unsupported "arm NEON is not supported"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp b/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
index a6ceb0b..d995676 100644
--- a/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
+++ b/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
@@ -31,7 +31,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -53,7 +53,7 @@ proc read_testcase { n } {
set n_testcases [get_integer_valueof "n_testcases" 0]
if { ${n_testcases} == 0 } {
- untested "No instruction relocation to test"
+ untested "no instruction relocation to test"
return 1
}
diff --git a/gdb/testsuite/gdb.arch/e500-prologue.exp b/gdb/testsuite/gdb.arch/e500-prologue.exp
index 3019b3e..68e6664 100644
--- a/gdb/testsuite/gdb.arch/e500-prologue.exp
+++ b/gdb/testsuite/gdb.arch/e500-prologue.exp
@@ -27,7 +27,7 @@ set testfile "e500-prologue"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp b/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
index 44d1957..edf767f 100644
--- a/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
+++ b/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
@@ -28,7 +28,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -52,14 +52,14 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
@@ -82,7 +82,7 @@ proc read_testcase { n } {
set n_testcases [gdb_readexpr "n_testcases"]
if { ${n_testcases} == 0 } {
- untested "No instruction relocation to test"
+ untested "no instruction relocation to test"
return 1
}
diff --git a/gdb/testsuite/gdb.arch/gdb1558.exp b/gdb/testsuite/gdb.arch/gdb1558.exp
index d96ad87..8cea6d3 100644
--- a/gdb/testsuite/gdb.arch/gdb1558.exp
+++ b/gdb/testsuite/gdb.arch/gdb1558.exp
@@ -50,7 +50,7 @@ gdb_test "b sub2" "Breakpoint 3.*" "set breakpoint at sub2"
gdb_run_cmd
-set test "Hits breakpoint at main after function called from main"
+set test "hits breakpoint at main after function called from main"
gdb_test_multiple "" $test {
-re "Breakpoint 1.*main .*$gdb_prompt $" {
pass $test
diff --git a/gdb/testsuite/gdb.arch/i386-bp_permanent.exp b/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
index ba2db2a..005d1fc 100644
--- a/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
+++ b/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
@@ -59,7 +59,7 @@ set retcode [gdb_test_multiple "disassemble $function" "Disassemble function '$f
}]
if {$retcode != 0} {
- fail "Disassemble failed, skipping entire test."
+ fail "disassemble failed, skipping entire test."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/i386-disp-step.exp b/gdb/testsuite/gdb.arch/i386-disp-step.exp
index f0815aa..7be606a 100644
--- a/gdb/testsuite/gdb.arch/i386-disp-step.exp
+++ b/gdb/testsuite/gdb.arch/i386-disp-step.exp
@@ -43,7 +43,7 @@ gdb_test "set displaced-stepping on" ""
gdb_test "show displaced-stepping" ".* displaced stepping .* is on.*"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/i386-float.exp b/gdb/testsuite/gdb.arch/i386-float.exp
index d643bee..2a869e8 100644
--- a/gdb/testsuite/gdb.arch/i386-float.exp
+++ b/gdb/testsuite/gdb.arch/i386-float.exp
@@ -33,7 +33,7 @@ if { [prepare_for_testing break.exp $testfile $srcfile [list debug $additional_f
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp b/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
index b569139..9c05cab 100644
--- a/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
+++ b/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
@@ -73,11 +73,11 @@ gdb_test "up 3" \
gdb_test_multiple "info frame" "Existence of the CFI inserted register" {
-re "Stack level 3, frame at (0x\[0-9a-f\]+):.*Saved registers:.* ecx at (0x\[0-9a-f\]+),.*" {
- pass "Existence of the CFI inserted register"
+ pass "existence of the CFI inserted register"
if { [string compare $expect_out(1,string) $expect_out(2,string)] } then {
- fail "Value of the CFI inserted register"
+ fail "value of the CFI inserted register"
} else {
- pass "Value of the CFI inserted register"
+ pass "value of the CFI inserted register"
}
}
}
diff --git a/gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp b/gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp
index 0c1c3a6..32367c9 100644
--- a/gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp
+++ b/gdb/testsuite/gdb.arch/ia64-breakpoint-shadow.exp
@@ -22,7 +22,7 @@ set testfile ia64-breakpoint-shadow
set srcfile ${testfile}.S
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/mips16-thunks.exp b/gdb/testsuite/gdb.arch/mips16-thunks.exp
index 15ebad3..37190d0 100644
--- a/gdb/testsuite/gdb.arch/mips16-thunks.exp
+++ b/gdb/testsuite/gdb.arch/mips16-thunks.exp
@@ -62,7 +62,7 @@ gdb_compile ${srcfile} ${objfile} object ${options}
set binfile [standard_output_file ${testname}]
set options [list debug nowarnings]
if { [gdb_compile ${objfiles} ${binfile} executable ${options}] != "" } then {
- unsupported "No MIPS16 support in the toolchain."
+ unsupported "no MIPS16 support in the toolchain."
return
}
clean_restart ${testname}
@@ -76,21 +76,21 @@ gdb_test_multiple "" "check for MIPS16 support in the processor" {
verbose "MIPS16 support check successful."
}
-re "$gdb_prompt $" {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
default {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
}
}
-re "$gdb_prompt $" {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
default {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
}
diff --git a/gdb/testsuite/gdb.arch/pa-nullify.exp b/gdb/testsuite/gdb.arch/pa-nullify.exp
index 6689569..cbc66bf 100644
--- a/gdb/testsuite/gdb.arch/pa-nullify.exp
+++ b/gdb/testsuite/gdb.arch/pa-nullify.exp
@@ -36,7 +36,7 @@ set binfile ${objdir}/${subdir}/${testfile}
set gcorefile ${objdir}/${subdir}/${testfile}.gcore
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp b/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
index d82c4de..f028e94 100644
--- a/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
@@ -27,7 +27,7 @@ set testfile "powerpc-aix-prologue"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/powerpc-power.exp b/gdb/testsuite/gdb.arch/powerpc-power.exp
index 8594ad5..f15e889 100644
--- a/gdb/testsuite/gdb.arch/powerpc-power.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-power.exp
@@ -25,7 +25,7 @@ if {![istarget "powerpc*-*-*"]} then {
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } {
- untested "PowerPC instructions disassembly"
+ untested "powerpc instructions disassembly"
return -1
}
@@ -49,7 +49,7 @@ proc instr_to_patt {offset instr} {
proc func_check {offset instr} {
global func
- set test "Found $offset: $instr"
+ set test "found $offset: $instr"
if [regexp -nocase -line [instr_to_patt $offset $instr] $func] {
pass $test
} else {
diff --git a/gdb/testsuite/gdb.arch/powerpc-prologue.exp b/gdb/testsuite/gdb.arch/powerpc-prologue.exp
index 0c74d7e..e6c899a 100644
--- a/gdb/testsuite/gdb.arch/powerpc-prologue.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-prologue.exp
@@ -29,7 +29,7 @@ set binfile [standard_output_file ${testfile}]
# Don't use "debug", so that we don't have line information for the assembly
# fragments.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- untested "PowerPC prologue tests"
+ untested "powerpc prologue tests"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ppc-dfp.exp b/gdb/testsuite/gdb.arch/ppc-dfp.exp
index 6f77d18..b7f1905 100644
--- a/gdb/testsuite/gdb.arch/ppc-dfp.exp
+++ b/gdb/testsuite/gdb.arch/ppc-dfp.exp
@@ -35,7 +35,7 @@ if ![test_compiler_info gcc*] {
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {quiet debug}] != "" } {
- unsupported "This machine doesn't support Decimal Floating Point."
+ unsupported "this machine doesn't support Decimal Floating Point."
return -1
}
@@ -54,7 +54,7 @@ gdb_run_cmd
# Unless the program bails out after checking AT_HWCAP.
gdb_expect {
-re "$inferior_exited_re with code 01.\[\r\n\]+$gdb_prompt $" {
- unsupported "This machine doesn't support Decimal Floating Point."
+ unsupported "this machine doesn't support Decimal Floating Point."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ppc-fp.exp b/gdb/testsuite/gdb.arch/ppc-fp.exp
index 523aaa3..f54ad76 100644
--- a/gdb/testsuite/gdb.arch/ppc-fp.exp
+++ b/gdb/testsuite/gdb.arch/ppc-fp.exp
@@ -56,7 +56,7 @@ gdb_expect { -re ".*$gdb_prompt $" {} }
# First, verify if FPSCR exists and is all zeroes.
gdb_test_multiple "print \$fpscr" "FPSCR exists" {
- -re " = 0\[\r\n\]+$gdb_prompt $" { pass "FPSCR is all zeroes" }
+ -re " = 0\[\r\n\]+$gdb_prompt $" { pass "fpscr is all zeroes" }
-re " = void\[\r\n\]+$gdb_prompt $" {
# There's no FPSCR. Skip this testcase.
diff --git a/gdb/testsuite/gdb.arch/s390-multiarch.exp b/gdb/testsuite/gdb.arch/s390-multiarch.exp
index 3bed279..c4b2fb7 100644
--- a/gdb/testsuite/gdb.arch/s390-multiarch.exp
+++ b/gdb/testsuite/gdb.arch/s390-multiarch.exp
@@ -63,7 +63,7 @@ proc compile_and_dump {variant ccopts binfile} {
proc test_linux_v2 {} {
global gdb_prompt
- set test "Linux v2"
+ set test "linux v2"
gdb_test_multiple "info reg system_call" "$test" {
-re "system_call\[ \t\]+0x\[0-9a-z\]+\t.*\r\n$gdb_prompt $" {
pass "$test"
diff --git a/gdb/testsuite/gdb.arch/s390-tdbregs.exp b/gdb/testsuite/gdb.arch/s390-tdbregs.exp
index a377668..90b33b3 100644
--- a/gdb/testsuite/gdb.arch/s390-tdbregs.exp
+++ b/gdb/testsuite/gdb.arch/s390-tdbregs.exp
@@ -36,14 +36,14 @@ if { ![runto_main] } then {
gdb_test_multiple "next" "check for TE support" {
-re "Program received signal SIGILL,.*\r\n$gdb_prompt $" {
- unsupported "No TE support."
+ unsupported "no TE support."
return
}
-re "\[0-9\]+.*\r\n$gdb_prompt $" {
- pass "TE support available"
+ pass "te support available"
}
-re "$gdb_prompt $" {
- unsupported "No TE support (unknown error)."
+ unsupported "no TE support (unknown error)."
return
}
}
diff --git a/gdb/testsuite/gdb.arch/spu-info.exp b/gdb/testsuite/gdb.arch/spu-info.exp
index dc4f356..2110f83 100644
--- a/gdb/testsuite/gdb.arch/spu-info.exp
+++ b/gdb/testsuite/gdb.arch/spu-info.exp
@@ -53,7 +53,7 @@ proc c_to { marker } {
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/spu-ls.exp b/gdb/testsuite/gdb.arch/spu-ls.exp
index 6619ede..78104a4 100644
--- a/gdb/testsuite/gdb.arch/spu-ls.exp
+++ b/gdb/testsuite/gdb.arch/spu-ls.exp
@@ -38,7 +38,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/thumb-bx-pc.exp b/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
index 843a01a..b00571b 100644
--- a/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
+++ b/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
@@ -25,7 +25,7 @@ set srcfile ${testfile}.S
set opts {}
if [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} $opts] {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/thumb-prologue.exp b/gdb/testsuite/gdb.arch/thumb-prologue.exp
index d37c4f6..1f3c0fc 100644
--- a/gdb/testsuite/gdb.arch/thumb-prologue.exp
+++ b/gdb/testsuite/gdb.arch/thumb-prologue.exp
@@ -25,7 +25,7 @@ standard_testfile
# Don't use "debug", so that we don't have line information for the assembly
# fragments.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {"additional_flags=-mthumb"}] != "" } {
- untested "ARM prologue tests"
+ untested "arm prologue tests"
return -1
}
@@ -40,7 +40,7 @@ gdb_load ${binfile}
#
if ![runto_main] then {
- untested "ARM prologue tests"
+ untested "arm prologue tests"
return -1
}
diff --git a/gdb/testsuite/gdb.base/advance.exp b/gdb/testsuite/gdb.base/advance.exp
index 1dceb0d..ce8a98c 100644
--- a/gdb/testsuite/gdb.base/advance.exp
+++ b/gdb/testsuite/gdb.base/advance.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/annota-input-while-running.exp b/gdb/testsuite/gdb.base/annota-input-while-running.exp
index fc2e608..2c9b675 100644
--- a/gdb/testsuite/gdb.base/annota-input-while-running.exp
+++ b/gdb/testsuite/gdb.base/annota-input-while-running.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug] == -1} {
# Because runto_main doesn't know how to handle the prompt with annotations,
# run to main before we set the annotation level.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 1
}
diff --git a/gdb/testsuite/gdb.base/arrayidx.exp b/gdb/testsuite/gdb.base/arrayidx.exp
index 3f244d0..a2253e9 100644
--- a/gdb/testsuite/gdb.base/arrayidx.exp
+++ b/gdb/testsuite/gdb.base/arrayidx.exp
@@ -20,7 +20,7 @@
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/asmlabel.exp b/gdb/testsuite/gdb.base/asmlabel.exp
index 09ea845..6d9a681 100644
--- a/gdb/testsuite/gdb.base/asmlabel.exp
+++ b/gdb/testsuite/gdb.base/asmlabel.exp
@@ -38,7 +38,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/async.exp b/gdb/testsuite/gdb.base/async.exp
index f688423..3adb156 100644
--- a/gdb/testsuite/gdb.base/async.exp
+++ b/gdb/testsuite/gdb.base/async.exp
@@ -63,7 +63,7 @@ proc test_background {command before_prompt after_prompt {message ""}} {
fail "$message"
}
-re ".*Asynchronous execution not supported on this target\..*" {
- unsupported "Asynchronous execution not supported: $message"
+ unsupported "asynchronous execution not supported: $message"
}
timeout {
fail "$message (timeout)"
diff --git a/gdb/testsuite/gdb.base/attach-wait-input.exp b/gdb/testsuite/gdb.base/attach-wait-input.exp
index 394c293..07142af 100644
--- a/gdb/testsuite/gdb.base/attach-wait-input.exp
+++ b/gdb/testsuite/gdb.base/attach-wait-input.exp
@@ -48,7 +48,7 @@ proc start_program {binfile} {
clean_restart $binfile
if ![runto setup_done] then {
- fail "Can't run to setup_done"
+ fail "can't run to setup_done"
return 0
}
diff --git a/gdb/testsuite/gdb.base/auto-connect-native-target.exp b/gdb/testsuite/gdb.base/auto-connect-native-target.exp
index 191f85c..504708c 100644
--- a/gdb/testsuite/gdb.base/auto-connect-native-target.exp
+++ b/gdb/testsuite/gdb.base/auto-connect-native-target.exp
@@ -36,7 +36,7 @@ gdb_test_multiple $test $test {
}
if { !$have_native } {
- unsupported "No \"target native\" support."
+ unsupported "no \"target native\" support."
return
}
@@ -62,14 +62,14 @@ set topmost [get_topmost_target "check whether a target is already connected"]
# Testing against the extended-remote board, for example?
if { $topmost != "exec" } {
- unsupported "Already connected to target $topmost."
+ unsupported "already connected to target $topmost."
return
}
# Check which target this board connects to. If testing with a native
# target board, this should cause the native target to auto connect.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -94,7 +94,7 @@ proc check_native_target {test} {
# Testing against a remote board, for example?
if { ![check_native_target "check whether board tests the native target"] } {
- unsupported "Not testing the native target."
+ unsupported "not testing the native target."
return
}
diff --git a/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
index a2de2c0..e7e3d7e 100644
--- a/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
+++ b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
@@ -37,7 +37,7 @@ proc spawn_shell {} {
set res [remote_spawn host "/bin/sh"]
if { $res < 0 || $res == "" } {
- unsupported "Spawning shell failed."
+ unsupported "spawning shell failed."
return 0
}
diff --git a/gdb/testsuite/gdb.base/bfp-test.exp b/gdb/testsuite/gdb.base/bfp-test.exp
index 9725331..4b39d39 100644
--- a/gdb/testsuite/gdb.base/bfp-test.exp
+++ b/gdb/testsuite/gdb.base/bfp-test.exp
@@ -19,7 +19,7 @@
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/bigcore.exp b/gdb/testsuite/gdb.base/bigcore.exp
index ae00d0a..62ca2b1 100644
--- a/gdb/testsuite/gdb.base/bigcore.exp
+++ b/gdb/testsuite/gdb.base/bigcore.exp
@@ -21,7 +21,7 @@
# mechanism that would let it efficiently access a remote corefile.
if ![isnative] then {
- untested "Remote system"
+ untested "remote system"
return
}
@@ -34,7 +34,7 @@ if { [istarget "*-*-*bsd*"]
|| [istarget "*-*-solaris*"]
|| [istarget "*-*-darwin*"]
|| [istarget "*-*-cygwin*"] } {
- untested "Kernel lacks sparse corefile support (PR gdb/1551)"
+ untested "kernel lacks sparse corefile support (PR gdb/1551)"
return
}
@@ -146,7 +146,7 @@ foreach pat [list core.${inferior_pid} ${testfile}.core core] {
}
if { $file == "" } {
- untested "Can't generate a core file"
+ untested "can't generate a core file"
return 0
}
diff --git a/gdb/testsuite/gdb.base/bp-permanent.exp b/gdb/testsuite/gdb.base/bp-permanent.exp
index 57e36ed..64d0171 100644
--- a/gdb/testsuite/gdb.base/bp-permanent.exp
+++ b/gdb/testsuite/gdb.base/bp-permanent.exp
@@ -110,7 +110,7 @@ proc test {always_inserted sw_watchpoint} {
# Some targets (QEMU for one) will disallow writes to the
# .text section under certain circumstances. It is no use
# continuing with the test at this point. Just return.
- unsupported "Cannot modify memory"
+ unsupported "cannot modify memory"
return
}
-re " = .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.base/break-always.exp b/gdb/testsuite/gdb.base/break-always.exp
index 409fdcc..a1a4165 100644
--- a/gdb/testsuite/gdb.base/break-always.exp
+++ b/gdb/testsuite/gdb.base/break-always.exp
@@ -77,7 +77,7 @@ foreach test_value {0 1} {
# Some targets do not allow manually writing a breakpoint to a
# certain memory address, like QEMU. In that case, just bail out.
- unsupported "Cannot write to address $bp_address"
+ unsupported "cannot write to address $bp_address"
return -1
}
-re " = .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.base/break-fun-addr.exp b/gdb/testsuite/gdb.base/break-fun-addr.exp
index e8bed3f..938ec87 100644
--- a/gdb/testsuite/gdb.base/break-fun-addr.exp
+++ b/gdb/testsuite/gdb.base/break-fun-addr.exp
@@ -36,7 +36,7 @@ set srcfile1 ${testfile1}.c
set binfile1 [standard_output_file ${testfile1}]
if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile1}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile1}"
+ untested "couldn't compile ${srcfile1}"
return -1
}
@@ -65,7 +65,7 @@ set srcfile2 ${testfile2}.c
set binfile2 [standard_output_file ${testfile2}]
if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile2}"
+ untested "couldn't compile ${srcfile2}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/break-idempotent.exp b/gdb/testsuite/gdb.base/break-idempotent.exp
index 5f25fe0..eab03c4 100644
--- a/gdb/testsuite/gdb.base/break-idempotent.exp
+++ b/gdb/testsuite/gdb.base/break-idempotent.exp
@@ -41,7 +41,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -127,7 +127,7 @@ proc test_break { always_inserted break_command } {
delete_breakpoints
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/break-main-file-remove-fail.exp b/gdb/testsuite/gdb.base/break-main-file-remove-fail.exp
index f21bbc3..2fe6676 100644
--- a/gdb/testsuite/gdb.base/break-main-file-remove-fail.exp
+++ b/gdb/testsuite/gdb.base/break-main-file-remove-fail.exp
@@ -56,7 +56,7 @@ proc test_remove_bp { initial_load } {
set GDBFLAGS $saved_gdbflags
if ![runto start] {
- fail "Can't run to start"
+ fail "can't run to start"
return
}
diff --git a/gdb/testsuite/gdb.base/break-probes.exp b/gdb/testsuite/gdb.base/break-probes.exp
index ddadc8b..bb8eee0 100644
--- a/gdb/testsuite/gdb.base/break-probes.exp
+++ b/gdb/testsuite/gdb.base/break-probes.exp
@@ -28,7 +28,7 @@ set probes_bp "dl_main"
if { [gdb_compile_shlib $srcfile_lib $binfile_lib \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib."
+ untested "could not compile $binfile_lib."
return -1
}
diff --git a/gdb/testsuite/gdb.base/break-unload-file.exp b/gdb/testsuite/gdb.base/break-unload-file.exp
index 68690c0..a395cde 100644
--- a/gdb/testsuite/gdb.base/break-unload-file.exp
+++ b/gdb/testsuite/gdb.base/break-unload-file.exp
@@ -60,7 +60,7 @@ proc test_break { initial_load always_inserted break_command } {
set GDBFLAGS $saved_gdbflags
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp
index 2b4587e..f111d58 100644
--- a/gdb/testsuite/gdb.base/break.exp
+++ b/gdb/testsuite/gdb.base/break.exp
@@ -35,13 +35,13 @@ gdb_expect {
send_gdb "y\n"
gdb_expect {
-re "$gdb_prompt $" {
- fail "Delete all breakpoints when none (unexpected prompt)"
+ fail "delete all breakpoints when none (unexpected prompt)"
}
- timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
+ timeout { fail "delete all breakpoints when none (timeout after unexpected prompt)" }
}
}
- -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
- timeout { fail "Delete all breakpoints when none (timeout)" }
+ -re ".*$gdb_prompt $" { pass "delete all breakpoints when none" }
+ timeout { fail "delete all breakpoints when none (timeout)" }
}
#
diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp
index c63935a..0e10453 100644
--- a/gdb/testsuite/gdb.base/call-ar-st.exp
+++ b/gdb/testsuite/gdb.base/call-ar-st.exp
@@ -22,7 +22,7 @@ standard_testfile
# Some targets can't call functions, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-rt-st.exp b/gdb/testsuite/gdb.base/call-rt-st.exp
index a92ba9e..7120b8b 100644
--- a/gdb/testsuite/gdb.base/call-rt-st.exp
+++ b/gdb/testsuite/gdb.base/call-rt-st.exp
@@ -40,7 +40,7 @@ if [get_compiler_info] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-sc.exp b/gdb/testsuite/gdb.base/call-sc.exp
index 89065e1..a5405df 100644
--- a/gdb/testsuite/gdb.base/call-sc.exp
+++ b/gdb/testsuite/gdb.base/call-sc.exp
@@ -23,7 +23,7 @@
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp
index a6b07cf..5dd580c 100644
--- a/gdb/testsuite/gdb.base/call-signal-resume.exp
+++ b/gdb/testsuite/gdb.base/call-signal-resume.exp
@@ -36,7 +36,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
@@ -56,7 +56,7 @@ proc get_dummy_frame_number { } {
clean_restart ${binfile}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/call-strs.exp b/gdb/testsuite/gdb.base/call-strs.exp
index 7a310d4..ac1bf6d 100644
--- a/gdb/testsuite/gdb.base/call-strs.exp
+++ b/gdb/testsuite/gdb.base/call-strs.exp
@@ -28,7 +28,7 @@ standard_testfile
# Some targets can't call functions, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/callexit.exp b/gdb/testsuite/gdb.base/callexit.exp
index 219c9a4..e904200 100644
--- a/gdb/testsuite/gdb.base/callexit.exp
+++ b/gdb/testsuite/gdb.base/callexit.exp
@@ -24,7 +24,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
@@ -33,7 +33,7 @@ if [target_info exists gdb,cannot_call_functions] {
clean_restart ${binfile}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp
index b108952..8fa016a 100644
--- a/gdb/testsuite/gdb.base/callfuncs.exp
+++ b/gdb/testsuite/gdb.base/callfuncs.exp
@@ -26,7 +26,7 @@ if [support_complex_tests] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp b/gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp
index 31fa1b8..63c3292 100644
--- a/gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp
+++ b/gdb/testsuite/gdb.base/catch-gdb-caused-signals.exp
@@ -36,7 +36,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] {
- fail "Can't run to main to make the tests"
+ fail "can't run to main to make the tests"
return -1
}
diff --git a/gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp b/gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp
index 7fabfd6..7cc848c 100644
--- a/gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp
+++ b/gdb/testsuite/gdb.base/catch-signal-siginfo-cond.exp
@@ -42,7 +42,7 @@ if { [prepare_for_testing "failed to prepare" "${testfile}" $srcfile {debug}] }
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/catch-syscall.exp b/gdb/testsuite/gdb.base/catch-syscall.exp
index a739c46..4bec7a6 100644
--- a/gdb/testsuite/gdb.base/catch-syscall.exp
+++ b/gdb/testsuite/gdb.base/catch-syscall.exp
@@ -29,7 +29,7 @@ if { [prepare_for_testing ${testfile}.exp $testfile ${testfile}.c] } {
# Check target supports catch syscall or not.
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/compare-sections.exp b/gdb/testsuite/gdb.base/compare-sections.exp
index 9fa42e0..09fde65 100644
--- a/gdb/testsuite/gdb.base/compare-sections.exp
+++ b/gdb/testsuite/gdb.base/compare-sections.exp
@@ -78,7 +78,7 @@ gdb_test_multiple $command $test {
# Now get past startup code.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/cond-eval-mode.exp b/gdb/testsuite/gdb.base/cond-eval-mode.exp
index 400c883..4816ddc 100644
--- a/gdb/testsuite/gdb.base/cond-eval-mode.exp
+++ b/gdb/testsuite/gdb.base/cond-eval-mode.exp
@@ -22,7 +22,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/condbreak-call-false.exp b/gdb/testsuite/gdb.base/condbreak-call-false.exp
index f0054c3..d51ff63 100644
--- a/gdb/testsuite/gdb.base/condbreak-call-false.exp
+++ b/gdb/testsuite/gdb.base/condbreak-call-false.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/consecutive-step-over.exp b/gdb/testsuite/gdb.base/consecutive-step-over.exp
index 5fb0319..9a05aeb 100644
--- a/gdb/testsuite/gdb.base/consecutive-step-over.exp
+++ b/gdb/testsuite/gdb.base/consecutive-step-over.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/cursal.exp b/gdb/testsuite/gdb.base/cursal.exp
index bf12faa..efaa7c7 100644
--- a/gdb/testsuite/gdb.base/cursal.exp
+++ b/gdb/testsuite/gdb.base/cursal.exp
@@ -17,7 +17,7 @@
standard_testfile
if {[gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != ""} {
- untested "Couldn't compile $srcfile"
+ untested "couldn't compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.base/disabled-location.exp b/gdb/testsuite/gdb.base/disabled-location.exp
index 0c49466..10e5121 100644
--- a/gdb/testsuite/gdb.base/disabled-location.exp
+++ b/gdb/testsuite/gdb.base/disabled-location.exp
@@ -20,7 +20,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile}] } {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/disasm-end-cu.exp b/gdb/testsuite/gdb.base/disasm-end-cu.exp
index 681cb76..81b153f 100644
--- a/gdb/testsuite/gdb.base/disasm-end-cu.exp
+++ b/gdb/testsuite/gdb.base/disasm-end-cu.exp
@@ -29,21 +29,21 @@ set main_addr [get_hexadecimal_valueof "&main" "0"]
set dummy_3_addr [get_hexadecimal_valueof "&dummy_3" "0"]
if {$main_addr == 0 || $dummy_3_addr == 0 || $dummy_3_addr <= $main_addr} {
- fail "Unable to extract required addresses, or addresses out of order"
+ fail "unable to extract required addresses, or addresses out of order"
return -1
}
gdb_test_multiple "disassemble /m ${main_addr},${dummy_3_addr}" "Disassemble address range with source" {
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\nEnd of assembler dump\." {
- fail "No output from the disassemble command"
+ fail "no output from the disassemble command"
}
-re "Line number 0 out of range;.* has $decimal lines\." {
- fail "The disassemble command failed"
+ fail "the disassemble command failed"
}
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\n.*main.*End of assembler dump\." {
pass "disassemble command returned some output"
}
-re ".*$gdb_prompt $" {
- fail "Unexpected output from disassemble command"
+ fail "unexpected output from disassemble command"
}
}
diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp
index 040110a..9576be54 100644
--- a/gdb/testsuite/gdb.base/display.exp
+++ b/gdb/testsuite/gdb.base/display.exp
@@ -53,7 +53,7 @@ if !$use_gdb_stub {
# Ok, on to real life
#
if ![runto_main] then {
- fail "Could not run to main - other tests will fail."
+ fail "could not run to main - other tests will fail."
continue
}
diff --git a/gdb/testsuite/gdb.base/double-prompt-target-event-error.exp b/gdb/testsuite/gdb.base/double-prompt-target-event-error.exp
index ebf2231..16567fa 100644
--- a/gdb/testsuite/gdb.base/double-prompt-target-event-error.exp
+++ b/gdb/testsuite/gdb.base/double-prompt-target-event-error.exp
@@ -41,7 +41,7 @@ proc cancel_pagination_in_target_event { command } {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp b/gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp
index b6b5955..004dc2b 100644
--- a/gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp
+++ b/gdb/testsuite/gdb.base/dprintf-bp-same-addr.exp
@@ -31,7 +31,7 @@ proc test { style } {
clean_restart $binfile
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/dprintf-detach.exp b/gdb/testsuite/gdb.base/dprintf-detach.exp
index 798bf9f..a0be2cd 100644
--- a/gdb/testsuite/gdb.base/dprintf-detach.exp
+++ b/gdb/testsuite/gdb.base/dprintf-detach.exp
@@ -46,7 +46,7 @@ proc dprintf_detach_test { breakpoint_always_inserted dprintf_style disconnected
gdb_test_no_output "set disconnected-dprintf ${disconnected_dprintf}"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/dprintf-next.exp b/gdb/testsuite/gdb.base/dprintf-next.exp
index e8da9be..7a36278 100644
--- a/gdb/testsuite/gdb.base/dprintf-next.exp
+++ b/gdb/testsuite/gdb.base/dprintf-next.exp
@@ -25,7 +25,7 @@ if [prepare_for_testing "failed to prepare for dprintf with next" \
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/dprintf-non-stop.exp b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
index 1787f6f..94f97d8 100644
--- a/gdb/testsuite/gdb.base/dprintf-non-stop.exp
+++ b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
@@ -15,7 +15,7 @@
if [is_remote target] then {
# Testing with remote/non-stop is racy at the moment.
- unsupported "Testing dprintf with remote/non-stop is not supported."
+ unsupported "testing dprintf with remote/non-stop is not supported."
return 0
}
@@ -33,7 +33,7 @@ save_vars { GDBFLAGS } {
}
if ![runto main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/dprintf-pending.exp b/gdb/testsuite/gdb.base/dprintf-pending.exp
index 5758c1b..10df3fb 100644
--- a/gdb/testsuite/gdb.base/dprintf-pending.exp
+++ b/gdb/testsuite/gdb.base/dprintf-pending.exp
@@ -32,7 +32,7 @@ if { [get_compiler_info] } {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/dso2dso.exp b/gdb/testsuite/gdb.base/dso2dso.exp
index 336d46a..f620d2c 100644
--- a/gdb/testsuite/gdb.base/dso2dso.exp
+++ b/gdb/testsuite/gdb.base/dso2dso.exp
@@ -41,13 +41,13 @@ set binfile_libdso1 [standard_output_file $libdso1.so]
if { [gdb_compile_shlib $srcfile_libdso2 $binfile_libdso2 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_libdso2."
+ untested "could not compile $binfile_libdso2."
return -1
}
if { [gdb_compile_shlib $srcfile_libdso1 $binfile_libdso1 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_libdso1."
+ untested "could not compile $binfile_libdso1."
return -1
}
diff --git a/gdb/testsuite/gdb.base/ending-run.exp b/gdb/testsuite/gdb.base/ending-run.exp
index 945e835..37bb39e 100644
--- a/gdb/testsuite/gdb.base/ending-run.exp
+++ b/gdb/testsuite/gdb.base/ending-run.exp
@@ -270,7 +270,7 @@ if {!$use_gdb_stub
set exec_output [remote_exec host "ls core"]
if [ regexp "core not found" $exec_output] {
- pass "No core dumped on quit"
+ pass "no core dumped on quit"
} else {
if [ regexp "No such file or directory" $exec_output] {
pass "ls: core (No core dumped on quit)"
diff --git a/gdb/testsuite/gdb.base/enum_cond.exp b/gdb/testsuite/gdb.base/enum_cond.exp
index bb3cf59..4be8a8a 100644
--- a/gdb/testsuite/gdb.base/enum_cond.exp
+++ b/gdb/testsuite/gdb.base/enum_cond.exp
@@ -21,7 +21,7 @@ standard_testfile .c
set opts [list debug additional_flags=-fshort-enums]
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $opts] != "" } {
- untested "Could not compile ${srcfile}"
+ untested "could not compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/examine-backward.exp b/gdb/testsuite/gdb.base/examine-backward.exp
index e03cbfd..f39056e 100644
--- a/gdb/testsuite/gdb.base/examine-backward.exp
+++ b/gdb/testsuite/gdb.base/examine-backward.exp
@@ -36,7 +36,7 @@ proc get_first_mapped_address {} {
set addr $expect_out(1,string)
}
-re "$gdb_prompt $" {
- unsupported "Current target does not support 'info proc mappings'"
+ unsupported "current target does not support 'info proc mappings'"
}
}
return ${addr}
diff --git a/gdb/testsuite/gdb.base/exe-lock.exp b/gdb/testsuite/gdb.base/exe-lock.exp
index 66eae02..8cb8f9d 100644
--- a/gdb/testsuite/gdb.base/exe-lock.exp
+++ b/gdb/testsuite/gdb.base/exe-lock.exp
@@ -23,7 +23,7 @@ standard_testfile arrayidx.c
append binfile $EXEEXT
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/exec-invalid-sysroot.exp b/gdb/testsuite/gdb.base/exec-invalid-sysroot.exp
index 9665b5f..a089e89 100644
--- a/gdb/testsuite/gdb.base/exec-invalid-sysroot.exp
+++ b/gdb/testsuite/gdb.base/exec-invalid-sysroot.exp
@@ -47,7 +47,7 @@ proc do_exec_sysroot_test {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile}"
+ fail "couldn't run ${testfile}"
return
}
diff --git a/gdb/testsuite/gdb.base/execl-update-breakpoints.exp b/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
index 47a848e..1c2713f 100644
--- a/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
+++ b/gdb/testsuite/gdb.base/execl-update-breakpoints.exp
@@ -55,7 +55,7 @@ if { [gdb_compile $objfile $exec1 executable $opts1_ld] != "" } {
clean_restart ${exec1}
if ![runto_main] then {
- fail "Couldn't run to main"
+ fail "couldn't run to main"
return -1
}
@@ -70,7 +70,7 @@ gdb_test_multiple "p/x &main" $test {
clean_restart ${exec2}
if ![runto_main] then {
- fail "Couldn't run to main"
+ fail "couldn't run to main"
return -1
}
@@ -103,7 +103,7 @@ proc test { always_inserted } {
gdb_test_no_output "set breakpoint always-inserted $always_inserted"
if ![runto_main] then {
- fail "Couldn't run to main"
+ fail "couldn't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/execution-termios.exp b/gdb/testsuite/gdb.base/execution-termios.exp
index 4abdeb8..02b674c 100644
--- a/gdb/testsuite/gdb.base/execution-termios.exp
+++ b/gdb/testsuite/gdb.base/execution-termios.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
proc test { prefix body } {
with_test_prefix $prefix {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
uplevel 1 $body
diff --git a/gdb/testsuite/gdb.base/fileio.exp b/gdb/testsuite/gdb.base/fileio.exp
index d83bbb4..5dd2f20 100644
--- a/gdb/testsuite/gdb.base/fileio.exp
+++ b/gdb/testsuite/gdb.base/fileio.exp
@@ -225,7 +225,7 @@ gdb_test continue \
"Continuing\\..*rename 2:.*EISDIR$stop_msg" \
"Renaming a file to existing directory returns EISDIR"
-set test "Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
+set test "renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
gdb_test_multiple continue "${test}" {
-re "Continuing\\..*rename 3:.*(ENOTEMPTY|EEXIST)$stop_msg$gdb_prompt $" {
pass "${test}"
diff --git a/gdb/testsuite/gdb.base/fixsection.exp b/gdb/testsuite/gdb.base/fixsection.exp
index 07b7bb5..5b7fdf6 100644
--- a/gdb/testsuite/gdb.base/fixsection.exp
+++ b/gdb/testsuite/gdb.base/fixsection.exp
@@ -34,7 +34,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile \
executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcfile."
+ untested "could not compile either $libsrc or $srcfile."
return -1
}
@@ -47,7 +47,7 @@ gdb_load ${binfile}
gdb_load_shlib ${lib_sl}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 1
}
diff --git a/gdb/testsuite/gdb.base/foll-exec-mode.exp b/gdb/testsuite/gdb.base/foll-exec-mode.exp
index aa7b4143..af417ca 100644
--- a/gdb/testsuite/gdb.base/foll-exec-mode.exp
+++ b/gdb/testsuite/gdb.base/foll-exec-mode.exp
@@ -69,7 +69,7 @@ proc do_catch_exec_test { } {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile}"
+ fail "couldn't run ${testfile}"
return
}
@@ -109,7 +109,7 @@ proc do_follow_exec_mode_tests { mode cmd infswitch } {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile}"
+ fail "couldn't run ${testfile}"
return
}
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index f496cca..ed86c0f 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -48,7 +48,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile}"
+ fail "couldn't run ${testfile}"
return
}
@@ -75,7 +75,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile}"
+ fail "couldn't run ${testfile}"
return
}
# Execute the code setting up variable PROG.
@@ -162,7 +162,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile} (2nd try)"
+ fail "couldn't run ${testfile} (2nd try)"
return
}
@@ -231,7 +231,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile} (3rd try)"
+ fail "couldn't run ${testfile} (3rd try)"
return
}
# Execute the code setting up variable PROG.
@@ -296,7 +296,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile} (4th try)"
+ fail "couldn't run ${testfile} (4th try)"
return
}
# Execute the code setting up variable PROG.
@@ -355,7 +355,7 @@ proc do_exec_tests {} {
# Start the program running, and stop at main.
#
if ![runto_main] then {
- fail "Couldn't run ${testfile} (5th try)"
+ fail "couldn't run ${testfile} (5th try)"
return
}
diff --git a/gdb/testsuite/gdb.base/fork-running-state.exp b/gdb/testsuite/gdb.base/fork-running-state.exp
index be81be6..7a54ada 100644
--- a/gdb/testsuite/gdb.base/fork-running-state.exp
+++ b/gdb/testsuite/gdb.base/fork-running-state.exp
@@ -36,7 +36,7 @@ proc do_test { detach_on_fork follow_fork non_stop schedule_multiple } {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/frame-args.exp b/gdb/testsuite/gdb.base/frame-args.exp
index 037967b..08eb5d8 100644
--- a/gdb/testsuite/gdb.base/frame-args.exp
+++ b/gdb/testsuite/gdb.base/frame-args.exp
@@ -15,7 +15,7 @@
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/fullpath-expand.exp b/gdb/testsuite/gdb.base/fullpath-expand.exp
index 4e572e5..1b1c5e7 100644
--- a/gdb/testsuite/gdb.base/fullpath-expand.exp
+++ b/gdb/testsuite/gdb.base/fullpath-expand.exp
@@ -16,7 +16,7 @@
standard_testfile .c fullpath-expand-func.c
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.base/func-ptr.exp b/gdb/testsuite/gdb.base/func-ptr.exp
index 1a56cb8..cda2e9d 100644
--- a/gdb/testsuite/gdb.base/func-ptr.exp
+++ b/gdb/testsuite/gdb.base/func-ptr.exp
@@ -22,7 +22,7 @@ if { [prepare_for_testing func-ptr.exp "func-ptr" {func-ptr.c} {debug}] } {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/gcore-relro-pie.exp b/gdb/testsuite/gdb.base/gcore-relro-pie.exp
index 5f22544..5a22d5d 100644
--- a/gdb/testsuite/gdb.base/gcore-relro-pie.exp
+++ b/gdb/testsuite/gdb.base/gcore-relro-pie.exp
@@ -41,7 +41,7 @@ clean_restart ${stripped_binfile}
# The binary is stripped of debug info, but not minsyms.
if ![runto break_here] {
- fail "Can't run to break_here"
+ fail "can't run to break_here"
return -1
}
diff --git a/gdb/testsuite/gdb.base/gdb1090.exp b/gdb/testsuite/gdb.base/gdb1090.exp
index e75004c..2bba93e 100644
--- a/gdb/testsuite/gdb.base/gdb1090.exp
+++ b/gdb/testsuite/gdb.base/gdb1090.exp
@@ -30,7 +30,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 1
}
diff --git a/gdb/testsuite/gdb.base/gdb1555.exp b/gdb/testsuite/gdb.base/gdb1555.exp
index 5d11195..bb198f5 100644
--- a/gdb/testsuite/gdb.base/gdb1555.exp
+++ b/gdb/testsuite/gdb.base/gdb1555.exp
@@ -45,7 +45,7 @@ clean_restart ${binfile}
gdb_load_shlib $libobj
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp b/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
index c8bdd2b..7285962 100644
--- a/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
+++ b/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
@@ -29,13 +29,13 @@ set binfile_lib2 [standard_output_file $lib2name.so]
if { [gdb_compile_shlib $srcfile_lib1 $binfile_lib1 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib1."
+ untested "could not compile $binfile_lib1."
return -1
}
if { [gdb_compile_shlib $srcfile_lib2 $binfile_lib2 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib2."
+ untested "could not compile $binfile_lib2."
return -1
}
diff --git a/gdb/testsuite/gdb.base/gnu-debugdata.exp b/gdb/testsuite/gdb.base/gnu-debugdata.exp
index 6f6d3c6..96a9fe9 100644
--- a/gdb/testsuite/gdb.base/gnu-debugdata.exp
+++ b/gdb/testsuite/gdb.base/gnu-debugdata.exp
@@ -142,7 +142,7 @@ gdb_test "p debugdata_function" \
clean_restart "$testfile.test"
if {$gdb_file_cmd_debug_info == "lzma"} {
- unsupported "LZMA support not available in this gdb"
+ unsupported "lzma support not available in this gdb"
} else {
gdb_test "p debugdata_function" \
{ = {<text variable, no debug info>} 0x[0-9a-f]+ <debugdata_function>} \
diff --git a/gdb/testsuite/gdb.base/gnu-ifunc.exp b/gdb/testsuite/gdb.base/gnu-ifunc.exp
index 3b2775b..ce9e11f 100644
--- a/gdb/testsuite/gdb.base/gnu-ifunc.exp
+++ b/gdb/testsuite/gdb.base/gnu-ifunc.exp
@@ -52,7 +52,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcdir}/${subdir}/$libsrc $lib_so $lib_opts] != ""
|| [gdb_compile ${srcdir}/${subdir}/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile dynamic executable $binfile."
+ untested "could not compile dynamic executable $binfile."
return -1
}
@@ -62,7 +62,7 @@ clean_restart $executable
gdb_load_shlib ${lib_so}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 1
}
@@ -144,7 +144,7 @@ gdb_test "info sym $expect_out(1,string)" "gnu_ifunc in section .*" "info sym <g
if { [gdb_compile ${srcdir}/${subdir}/$libsrc $lib_o object {}] != ""
|| [gdb_compile "${srcdir}/${subdir}/$srcfile $lib_o" $staticbinfile executable {debug}] != "" } {
- untested "Could not compile static executable $staticbinfile."
+ untested "could not compile static executable $staticbinfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
index 03a6b74..28ab3d6 100644
--- a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
+++ b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib_src} ${lib_so} $lib_opts] != ""
|| [gdb_compile ${srcdir}/${subdir}/${main_src} ${binfile} executable $exec_opts] != ""} {
- untested "Could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
+ untested "could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
return -1
}
@@ -44,7 +44,7 @@ clean_restart $binfile
gdb_load_shlib $lib_so
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/hbreak-unmapped.exp b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
index 43136ef..b5a2fbb 100644
--- a/gdb/testsuite/gdb.base/hbreak-unmapped.exp
+++ b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
@@ -24,13 +24,13 @@ if {[prepare_for_testing "failed to prepare" ${testfile} ${srcfile}]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
# If we can read the memory at address 0, skip the test.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is readable"
+ untested "memory at address 0 is readable"
return
}
diff --git a/gdb/testsuite/gdb.base/hook-stop.exp b/gdb/testsuite/gdb.base/hook-stop.exp
index 7b0c22e..b34a4b7 100644
--- a/gdb/testsuite/gdb.base/hook-stop.exp
+++ b/gdb/testsuite/gdb.base/hook-stop.exp
@@ -40,7 +40,7 @@ proc setup {commands} {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -code return
}
diff --git a/gdb/testsuite/gdb.base/infcall-input.exp b/gdb/testsuite/gdb.base/infcall-input.exp
index b92a915..c970c0e 100644
--- a/gdb/testsuite/gdb.base/infcall-input.exp
+++ b/gdb/testsuite/gdb.base/infcall-input.exp
@@ -29,7 +29,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Couldn't run to main"
+ fail "couldn't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/info-fun.exp b/gdb/testsuite/gdb.base/info-fun.exp
index 3437216..2eec698 100644
--- a/gdb/testsuite/gdb.base/info-fun.exp
+++ b/gdb/testsuite/gdb.base/info-fun.exp
@@ -40,13 +40,13 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $sep_lib_flags] != ""
|| [gdb_compile $srcdir/$subdir/${srcfile} ${binfile} \
executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
if {$libsepdebug == "SEP"} {
if {[gdb_gnu_strip_debug $binfile_lib] != 0} {
- unsupported "Could not split debug of $binfile_lib."
+ unsupported "could not split debug of $binfile_lib."
return
} else {
pass "split solib"
@@ -56,7 +56,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
clean_restart $executable
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/info-shared.exp b/gdb/testsuite/gdb.base/info-shared.exp
index aa00f73..57aa1d0 100644
--- a/gdb/testsuite/gdb.base/info-shared.exp
+++ b/gdb/testsuite/gdb.base/info-shared.exp
@@ -31,13 +31,13 @@ set define2 -DSHLIB2_NAME=\"$binfile_lib2\"
if { [gdb_compile_shlib $srcfile_lib1 $binfile_lib1 \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib1."
+ untested "could not compile $binfile_lib1."
return -1
}
if { [gdb_compile_shlib $srcfile_lib2 $binfile_lib2 \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib2."
+ untested "could not compile $binfile_lib2."
return -1
}
diff --git a/gdb/testsuite/gdb.base/interrupt-noterm.exp b/gdb/testsuite/gdb.base/interrupt-noterm.exp
index 05f6076..3aefa0c 100644
--- a/gdb/testsuite/gdb.base/interrupt-noterm.exp
+++ b/gdb/testsuite/gdb.base/interrupt-noterm.exp
@@ -24,7 +24,7 @@ if [prepare_for_testing "failed to prepare for testing" \
gdb_test_no_output "set interactive-mode off"
if ![runto main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/jit-so.exp b/gdb/testsuite/gdb.base/jit-so.exp
index 9fadd86..b2e2955 100644
--- a/gdb/testsuite/gdb.base/jit-so.exp
+++ b/gdb/testsuite/gdb.base/jit-so.exp
@@ -76,7 +76,7 @@ proc one_jit_test {count match_str} {
}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/jit.exp b/gdb/testsuite/gdb.base/jit.exp
index 17024e4..528c330 100644
--- a/gdb/testsuite/gdb.base/jit.exp
+++ b/gdb/testsuite/gdb.base/jit.exp
@@ -116,7 +116,7 @@ proc one_jit_test {count match_str reattach} {
}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/line-symtabs.exp b/gdb/testsuite/gdb.base/line-symtabs.exp
index af22db7..85e9b2f 100644
--- a/gdb/testsuite/gdb.base/line-symtabs.exp
+++ b/gdb/testsuite/gdb.base/line-symtabs.exp
@@ -21,7 +21,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/list.exp b/gdb/testsuite/gdb.base/list.exp
index 9946590..a9e2965 100644
--- a/gdb/testsuite/gdb.base/list.exp
+++ b/gdb/testsuite/gdb.base/list.exp
@@ -600,7 +600,7 @@ proc test_list {command listsize1 listsize2 linerange1 linerange2} {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/longjmp.exp b/gdb/testsuite/gdb.base/longjmp.exp
index 2c3401c..b8d67fd 100644
--- a/gdb/testsuite/gdb.base/longjmp.exp
+++ b/gdb/testsuite/gdb.base/longjmp.exp
@@ -32,7 +32,7 @@ if [get_compiler_info] {
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/macscp.exp b/gdb/testsuite/gdb.base/macscp.exp
index 4e03553..22dcaac 100644
--- a/gdb/testsuite/gdb.base/macscp.exp
+++ b/gdb/testsuite/gdb.base/macscp.exp
@@ -209,7 +209,7 @@ gdb_test_multiple "info source" "Test macro information" {
}
}
if {$macro_support == 0} {
- unsupported "Skipping test because debug information does not include macro information."
+ unsupported "skipping test because debug information does not include macro information."
return 0
}
diff --git a/gdb/testsuite/gdb.base/max-value-size.exp b/gdb/testsuite/gdb.base/max-value-size.exp
index 63a97a0..730e981 100644
--- a/gdb/testsuite/gdb.base/max-value-size.exp
+++ b/gdb/testsuite/gdb.base/max-value-size.exp
@@ -21,7 +21,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/nodebug.exp b/gdb/testsuite/gdb.base/nodebug.exp
index 43867ba..e0dd0e1 100644
--- a/gdb/testsuite/gdb.base/nodebug.exp
+++ b/gdb/testsuite/gdb.base/nodebug.exp
@@ -31,7 +31,7 @@ if [test_compiler_info "xlc-*"] {
}
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Couldn't compile $srcfile."
+ untested "couldn't compile $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/nofield.exp b/gdb/testsuite/gdb.base/nofield.exp
index 8d18960..9b06ba1 100644
--- a/gdb/testsuite/gdb.base/nofield.exp
+++ b/gdb/testsuite/gdb.base/nofield.exp
@@ -16,7 +16,7 @@
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/overlays.exp b/gdb/testsuite/gdb.base/overlays.exp
index cf4213a..45b8670 100644
--- a/gdb/testsuite/gdb.base/overlays.exp
+++ b/gdb/testsuite/gdb.base/overlays.exp
@@ -171,7 +171,7 @@ gdb_expect {
-re ".*ovly2, " { fail ".ovly2 not unmapped by .ovly3" }
-re ".*data00," { fail ".data00 not unmapped by .data01" }
-re ".*data02," { fail ".data02 not unmapped by .data03" }
- -re ".*$gdb_prompt $" { pass "Automatic unmapping" }
+ -re ".*$gdb_prompt $" { pass "automatic unmapping" }
timeout { fail "(timeout) Automatic unmapping" }
}
diff --git a/gdb/testsuite/gdb.base/paginate-after-ctrl-c-running.exp b/gdb/testsuite/gdb.base/paginate-after-ctrl-c-running.exp
index a6b4df7..e928207 100644
--- a/gdb/testsuite/gdb.base/paginate-after-ctrl-c-running.exp
+++ b/gdb/testsuite/gdb.base/paginate-after-ctrl-c-running.exp
@@ -37,7 +37,7 @@ proc test_ctrlc_while_target_running_paginates {} {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/paginate-bg-execution.exp b/gdb/testsuite/gdb.base/paginate-bg-execution.exp
index 5fc077e..284e623 100644
--- a/gdb/testsuite/gdb.base/paginate-bg-execution.exp
+++ b/gdb/testsuite/gdb.base/paginate-bg-execution.exp
@@ -33,7 +33,7 @@ proc test_bg_execution_pagination_return {} {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -76,7 +76,7 @@ proc test_bg_execution_pagination_cancel { how } {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/paginate-inferior-exit.exp b/gdb/testsuite/gdb.base/paginate-inferior-exit.exp
index 5128f5f..05a6dff 100644
--- a/gdb/testsuite/gdb.base/paginate-inferior-exit.exp
+++ b/gdb/testsuite/gdb.base/paginate-inferior-exit.exp
@@ -33,7 +33,7 @@ proc test_paginate_inferior_exited {} {
clean_restart $binfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/pending.exp b/gdb/testsuite/gdb.base/pending.exp
index 935fa14..ea913f1 100644
--- a/gdb/testsuite/gdb.base/pending.exp
+++ b/gdb/testsuite/gdb.base/pending.exp
@@ -37,7 +37,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/pr11022.exp b/gdb/testsuite/gdb.base/pr11022.exp
index 2a650d6..c8b4be8 100644
--- a/gdb/testsuite/gdb.base/pr11022.exp
+++ b/gdb/testsuite/gdb.base/pr11022.exp
@@ -29,7 +29,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/printcmds.exp b/gdb/testsuite/gdb.base/printcmds.exp
index 7937fe7..bdddde6 100644
--- a/gdb/testsuite/gdb.base/printcmds.exp
+++ b/gdb/testsuite/gdb.base/printcmds.exp
@@ -683,7 +683,7 @@ proc test_print_string_constants {} {
gdb_test_no_output "set print elements 50"
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
@@ -706,7 +706,7 @@ proc test_print_string_constants {} {
proc test_print_array_constants {} {
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
@@ -950,7 +950,7 @@ gdb_test "p ctable1\[120\]" "120 'x'" "p ctable1\[120\] #1"
gdb_load ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/ptr-typedef.exp b/gdb/testsuite/gdb.base/ptr-typedef.exp
index bb164db..e9f925d 100644
--- a/gdb/testsuite/gdb.base/ptr-typedef.exp
+++ b/gdb/testsuite/gdb.base/ptr-typedef.exp
@@ -16,7 +16,7 @@
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
@@ -25,7 +25,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
clean_restart ${binfile}
if ![runto marker1] {
- untested "Couldn't run to marker1"
+ untested "couldn't run to marker1"
}
gdb_test "print foo_ptr" "\\\$$decimal = \\\(struct foo \\\*\\\) $hex"
diff --git a/gdb/testsuite/gdb.base/ptype.exp b/gdb/testsuite/gdb.base/ptype.exp
index dd61091..296b67a 100644
--- a/gdb/testsuite/gdb.base/ptype.exp
+++ b/gdb/testsuite/gdb.base/ptype.exp
@@ -591,7 +591,7 @@ gdb_test "ptype foo" "type = char" "ptype foo typedef after second list of charf
if [runto_main] then {
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/randomize.exp b/gdb/testsuite/gdb.base/randomize.exp
index fe78c91..529e6d6 100644
--- a/gdb/testsuite/gdb.base/randomize.exp
+++ b/gdb/testsuite/gdb.base/randomize.exp
@@ -43,11 +43,11 @@ proc address_get { testname } {
set test "set disable-randomization off"
gdb_test_multiple "${test}" "${test}" {
-re "Disabling randomization .* unsupported .*$gdb_prompt $" {
- untested "Disabling randomization is not supported on this Linux GDB"
+ untested "disabling randomization is not supported on this Linux GDB"
return -1
}
-re "No symbol .* in current context.*$gdb_prompt $" {
- untested "Disabling randomization is not supported on this GDB platform"
+ untested "disabling randomization is not supported on this GDB platform"
return -1
}
-re "$gdb_prompt $" {
@@ -62,7 +62,7 @@ set addr1 [address_get "randomized first address"]
set addr2 [address_get "randomized second address"]
set test "randomized addresses should not match"
if [string equal $addr1 $addr2] {
- untested "No randomization detected on this system"
+ untested "no randomization detected on this system"
return -1
} else {
pass $test
diff --git a/gdb/testsuite/gdb.base/range-stepping.exp b/gdb/testsuite/gdb.base/range-stepping.exp
index 69c7ef9..9ed92c7 100644
--- a/gdb/testsuite/gdb.base/range-stepping.exp
+++ b/gdb/testsuite/gdb.base/range-stepping.exp
@@ -23,7 +23,7 @@ if { [prepare_for_testing $testfile.exp $testfile $srcfile {debug}] } {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/realname-expand.exp b/gdb/testsuite/gdb.base/realname-expand.exp
index 918cf75..d21a403 100644
--- a/gdb/testsuite/gdb.base/realname-expand.exp
+++ b/gdb/testsuite/gdb.base/realname-expand.exp
@@ -16,7 +16,7 @@
standard_testfile .c realname-expand-real.c
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.base/relativedebug.exp b/gdb/testsuite/gdb.base/relativedebug.exp
index 00f9792..9563576 100644
--- a/gdb/testsuite/gdb.base/relativedebug.exp
+++ b/gdb/testsuite/gdb.base/relativedebug.exp
@@ -21,7 +21,7 @@ if [target_info exists gdb,nosignals] {
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
diff --git a/gdb/testsuite/gdb.base/remote.exp b/gdb/testsuite/gdb.base/remote.exp
index a3c34eb..b75540a 100644
--- a/gdb/testsuite/gdb.base/remote.exp
+++ b/gdb/testsuite/gdb.base/remote.exp
@@ -127,7 +127,7 @@ set sizeof_random_data [get_sizeof "random_data" 48*1024]
# Part THREE: Check the upload behavour
#
if ![runto_main] then {
- fail "Cannot run to main"
+ fail "cannot run to main"
}
# Carefully check memory around each of the most common packet edge
diff --git a/gdb/testsuite/gdb.base/savedregs.exp b/gdb/testsuite/gdb.base/savedregs.exp
index eea30d1..45174a5 100644
--- a/gdb/testsuite/gdb.base/savedregs.exp
+++ b/gdb/testsuite/gdb.base/savedregs.exp
@@ -33,7 +33,7 @@ if [target_info exists gdb,nosignals] {
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
@@ -64,7 +64,7 @@ proc process_saved_regs { current inner outer } {
foreach func $inner {
set saved_regs($func) "error"
- set test "Get $func info frame"
+ set test "get $func info frame"
# Both dummy and sigtramp frames have problems.
switch $func {
dummy {
diff --git a/gdb/testsuite/gdb.base/sepdebug.exp b/gdb/testsuite/gdb.base/sepdebug.exp
index 3ad3669..4ac235e 100644
--- a/gdb/testsuite/gdb.base/sepdebug.exp
+++ b/gdb/testsuite/gdb.base/sepdebug.exp
@@ -63,7 +63,7 @@ remote_exec build "mkdir [file dirname $new_name]"
remote_exec build "ln -s ${binfile}${EXEEXT} $new_name"
clean_restart ${testfile}${EXEEXT}
if { $gdb_file_cmd_debug_info != "debug" } then {
- fail "No debug information found."
+ fail "no debug information found."
}
# Restore subdir
@@ -71,7 +71,7 @@ set subdir ${old_subdir}
clean_restart ${testfile}${EXEEXT}
if { $gdb_file_cmd_debug_info != "debug" } then {
- fail "No debug information found."
+ fail "no debug information found."
}
#
diff --git a/gdb/testsuite/gdb.base/set-noassign.exp b/gdb/testsuite/gdb.base/set-noassign.exp
index eac4e2d..fd9691d 100644
--- a/gdb/testsuite/gdb.base/set-noassign.exp
+++ b/gdb/testsuite/gdb.base/set-noassign.exp
@@ -19,7 +19,7 @@ if { [prepare_for_testing set-noassign.exp "set-noassign" start.c {debug nowarni
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/shlib-call.exp b/gdb/testsuite/gdb.base/shlib-call.exp
index 80491b7..fff1471 100644
--- a/gdb/testsuite/gdb.base/shlib-call.exp
+++ b/gdb/testsuite/gdb.base/shlib-call.exp
@@ -50,7 +50,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${lib1src} ${lib1} $lib_opts] != ""
|| [gdb_compile_shlib ${lib2src} ${lib2} $lib_opts] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $exec_opts] != ""} {
- untested "Could not compile $lib1, $lib2, or $srcfile."
+ untested "could not compile $lib1, $lib2, or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/shreloc.exp b/gdb/testsuite/gdb.base/shreloc.exp
index 1d3ed8b..ed98fa4 100644
--- a/gdb/testsuite/gdb.base/shreloc.exp
+++ b/gdb/testsuite/gdb.base/shreloc.exp
@@ -59,13 +59,13 @@ if [test_compiler_info "xlc-*"] {
}
if { [gdb_compile_shlib $lib1src $lib1_sl $lib_opts] != ""} {
- untested "Could not build $lib1_sl."
+ untested "could not build $lib1_sl."
return -1
} elseif { [gdb_compile_shlib $lib2src $lib2_sl $lib_opts] != ""} {
- untested "Could not build $lib1_s2."
+ untested "could not build $lib1_s2."
return -1
} elseif { [gdb_compile $srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not build $binfile."
+ untested "could not build $binfile."
return -1
}
@@ -77,7 +77,7 @@ gdb_load_shlib $lib2_sl
# Load up the shared objects
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -235,8 +235,8 @@ if {([istarget "*pc-cygwin"] || [istarget "*pc-mingw32"]) } {
# A better approach would be include absolute symbols via the assembler.
#
if {[check_same "_minor_os_version__" "${msymfile}"]} {
- pass "Absolute symbols not relocated"
+ pass "absolute symbols not relocated"
} else {
- fail "Absolute symbols not relocated"
+ fail "absolute symbols not relocated"
}
}
diff --git a/gdb/testsuite/gdb.base/sigaltstack.exp b/gdb/testsuite/gdb.base/sigaltstack.exp
index c85c69b..23373fc 100644
--- a/gdb/testsuite/gdb.base/sigaltstack.exp
+++ b/gdb/testsuite/gdb.base/sigaltstack.exp
@@ -31,7 +31,7 @@ if [target_info exists gdb,nosignals] {
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}.c"
+ untested "couldn't compile ${srcfile}.c"
return -1
}
diff --git a/gdb/testsuite/gdb.base/sigbpt.exp b/gdb/testsuite/gdb.base/sigbpt.exp
index d291c97..012bd29 100644
--- a/gdb/testsuite/gdb.base/sigbpt.exp
+++ b/gdb/testsuite/gdb.base/sigbpt.exp
@@ -56,7 +56,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return
}
@@ -119,7 +119,7 @@ proc after_segv { } {
# Check that the address table and SIGSEGV correspond.
-set test "Verify that ${signame} occurs at the last STEPI insn"
+set test "verify that ${signame} occurs at the last STEPI insn"
if {[string compare $segv_addr [at_segv]] == 0} {
pass "$test"
} else {
diff --git a/gdb/testsuite/gdb.base/siginfo-addr.exp b/gdb/testsuite/gdb.base/siginfo-addr.exp
index 305a519..480110e 100644
--- a/gdb/testsuite/gdb.base/siginfo-addr.exp
+++ b/gdb/testsuite/gdb.base/siginfo-addr.exp
@@ -28,7 +28,7 @@ if [target_info exists gdb,nosignals] {
standard_testfile
if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
- untested "Couldn't compile ${srcfile}.c"
+ untested "couldn't compile ${srcfile}.c"
return -1
}
diff --git a/gdb/testsuite/gdb.base/siginfo-obj.exp b/gdb/testsuite/gdb.base/siginfo-obj.exp
index 303074d..ca40216 100644
--- a/gdb/testsuite/gdb.base/siginfo-obj.exp
+++ b/gdb/testsuite/gdb.base/siginfo-obj.exp
@@ -52,7 +52,7 @@ set gcorefile [standard_output_file $testfile.gcore]
set gcore_created [gdb_gcore_cmd $gcorefile "save a core file"]
set ssi_addr ""
-set test "Extract si_addr"
+set test "extract si_addr"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_addr = ($hex).*$gdb_prompt $" {
set ssi_addr $expect_out(1,string)
@@ -60,7 +60,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_errno"
+set test "extract si_errno"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_errno = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_errno $expect_out(1,string)
@@ -68,7 +68,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_code"
+set test "extract si_code"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_code = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_code $expect_out(1,string)
@@ -76,7 +76,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_signo"
+set test "extract si_signo"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_signo = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_signo $expect_out(1,string)
@@ -105,7 +105,7 @@ if { ![runto_main] } then {
# Run to the signal.
gdb_test "continue" ".*Program received signal SIGSEGV.*" "continue to signal"
-set test "Set si_addr"
+set test "set si_addr"
gdb_test "p \$_siginfo._sifields._sigfault.si_addr = 0x666" " = \\(void \\*\\) 0x666"
gdb_test "p \$_siginfo.si_errno = 666" " = 666"
gdb_test "p \$_siginfo.si_code = 999" " = 999"
diff --git a/gdb/testsuite/gdb.base/siginfo-thread.exp b/gdb/testsuite/gdb.base/siginfo-thread.exp
index 9af99ea..415715a 100644
--- a/gdb/testsuite/gdb.base/siginfo-thread.exp
+++ b/gdb/testsuite/gdb.base/siginfo-thread.exp
@@ -48,7 +48,7 @@ set gcorefile [standard_output_file $testfile.gcore]
set gcore_created [gdb_gcore_cmd $gcorefile "save a core file"]
set ssi_addr ""
-set test "Extract si_addr"
+set test "extract si_addr"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_addr = ($hex).*$gdb_prompt $" {
set ssi_addr $expect_out(1,string)
@@ -56,7 +56,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_errno"
+set test "extract si_errno"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_errno = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_errno $expect_out(1,string)
@@ -64,7 +64,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_code"
+set test "extract si_code"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_code = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_code $expect_out(1,string)
@@ -72,7 +72,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_signo"
+set test "extract si_signo"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_signo = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_signo $expect_out(1,string)
diff --git a/gdb/testsuite/gdb.base/signest.exp b/gdb/testsuite/gdb.base/signest.exp
index 4709b5d..d53b1b0 100644
--- a/gdb/testsuite/gdb.base/signest.exp
+++ b/gdb/testsuite/gdb.base/signest.exp
@@ -39,7 +39,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return -1
}
diff --git a/gdb/testsuite/gdb.base/signull.exp b/gdb/testsuite/gdb.base/signull.exp
index a10c83e..5a14bff 100644
--- a/gdb/testsuite/gdb.base/signull.exp
+++ b/gdb/testsuite/gdb.base/signull.exp
@@ -57,7 +57,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return
}
diff --git a/gdb/testsuite/gdb.base/sigrepeat.exp b/gdb/testsuite/gdb.base/sigrepeat.exp
index f100653..82a9e0b 100644
--- a/gdb/testsuite/gdb.base/sigrepeat.exp
+++ b/gdb/testsuite/gdb.base/sigrepeat.exp
@@ -28,7 +28,7 @@ if [target_info exists gdb,nosignals] {
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/skip.exp b/gdb/testsuite/gdb.base/skip.exp
index ce55dd2..7eafd94 100644
--- a/gdb/testsuite/gdb.base/skip.exp
+++ b/gdb/testsuite/gdb.base/skip.exp
@@ -46,7 +46,7 @@ gdb_test "skip -x" "Invalid skip option: -x"
gdb_test "skip -rfu foo.* xyzzy" "Invalid argument: xyzzy"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -91,7 +91,7 @@ gdb_test "info skip" \
# right over it and go to the second line of main().
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -112,7 +112,7 @@ with_test_prefix "step after deleting 1" {
"info skip (delete 1)"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -132,7 +132,7 @@ with_test_prefix "step after disabling 3" {
"info skip shows entry as disabled"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -153,7 +153,7 @@ with_test_prefix "step after enable 3" {
"info skip shows entry as enabled"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -224,7 +224,7 @@ gdb_test "skip -rfu ^b.z$" "Function\\(s\\) \\^b\\.z\\$ will be skipped when ste
with_test_prefix "step using -fi" {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -237,7 +237,7 @@ with_test_prefix "step using -fi" {
with_test_prefix "step using -gfi" {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -250,7 +250,7 @@ with_test_prefix "step using -gfi" {
with_test_prefix "step using -fu for baz" {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -265,7 +265,7 @@ with_test_prefix "step using -fu for baz" {
with_test_prefix "step using -rfu for baz" {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -284,7 +284,7 @@ with_test_prefix "step using -fi + -fu" {
gdb_test_no_output "skip delete"
if ![runto test_skip_file_and_function no-message] {
- fail "Can't run to test_skip_file_and_function"
+ fail "can't run to test_skip_file_and_function"
return
}
diff --git a/gdb/testsuite/gdb.base/so-impl-ld.exp b/gdb/testsuite/gdb.base/so-impl-ld.exp
index 4223d4c..875242d 100644
--- a/gdb/testsuite/gdb.base/so-impl-ld.exp
+++ b/gdb/testsuite/gdb.base/so-impl-ld.exp
@@ -33,7 +33,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile \
executable $exec_opts] != ""} {
- untested "Couldn't compile $libsrc or $srcfile."
+ untested "couldn't compile $libsrc or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/solib-corrupted.exp b/gdb/testsuite/gdb.base/solib-corrupted.exp
index f1c1e5c..49660c8 100644
--- a/gdb/testsuite/gdb.base/solib-corrupted.exp
+++ b/gdb/testsuite/gdb.base/solib-corrupted.exp
@@ -32,7 +32,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -59,7 +59,7 @@ gdb_test_multiple $test $test {
}
if { [llength $probes] == 0 } {
xfail $test
- untested "GDB is using probes"
+ untested "gdb is using probes"
return
}
diff --git a/gdb/testsuite/gdb.base/solib-disc.exp b/gdb/testsuite/gdb.base/solib-disc.exp
index 8b61c83..9baf8c2 100644
--- a/gdb/testsuite/gdb.base/solib-disc.exp
+++ b/gdb/testsuite/gdb.base/solib-disc.exp
@@ -56,7 +56,7 @@ gdb_load ${binfile}
gdb_load_shlib $libobj
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/solib-display.exp b/gdb/testsuite/gdb.base/solib-display.exp
index a82ec2e..f4d6bb8 100644
--- a/gdb/testsuite/gdb.base/solib-display.exp
+++ b/gdb/testsuite/gdb.base/solib-display.exp
@@ -74,13 +74,13 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
}
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $sep_lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
if {$libsepdebug == "SEP"} {
if {[gdb_gnu_strip_debug $binfile_lib] != 0} {
- unsupported "Could not split debug of $binfile_lib."
+ unsupported "could not split debug of $binfile_lib."
return
} else {
pass "split solib"
@@ -90,7 +90,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
clean_restart $executable
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -99,7 +99,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
gdb_test "display c_global" "3: c_global = 43"
if { [gdb_start_cmd] < 0 } {
- fail "Can't run to main (2)"
+ fail "can't run to main (2)"
continue
}
@@ -112,7 +112,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
# Now rebuild the library without b_global
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} \
"$sep_lib_flags additional_flags=-DNO_B_GLOBAL"] != ""} {
- fail "Can't rebuild $binfile_lib"
+ fail "can't rebuild $binfile_lib"
}
if {$libsepdebug == "SEP"} {
@@ -126,7 +126,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
}
if { [gdb_start_cmd] < 0 } {
- fail "Can't run to main (3)"
+ fail "can't run to main (3)"
continue
}
@@ -149,7 +149,7 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
gdb_test "display a_static" "6: a_static = 46"
if { [gdb_start_cmd] < 0 } {
- fail "Can't run to main (4)"
+ fail "can't run to main (4)"
continue
}
diff --git a/gdb/testsuite/gdb.base/solib-overlap.exp b/gdb/testsuite/gdb.base/solib-overlap.exp
index 40fdd09..5b90894 100644
--- a/gdb/testsuite/gdb.base/solib-overlap.exp
+++ b/gdb/testsuite/gdb.base/solib-overlap.exp
@@ -70,14 +70,14 @@ foreach prelink_lib1 {0x40000000 0x50000000} { with_test_prefix "$prelink_lib1"
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib1} $lib_flags] != ""
|| [gdb_compile_shlib ${srcfile_lib} ${binfile_lib2} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile ${binfile_lib1_test_msg}, ${binfile_lib2_test_msg} or ${binfile_test_msg}."
+ untested "could not compile ${binfile_lib1_test_msg}, ${binfile_lib2_test_msg} or ${binfile_test_msg}."
return -1
}
if {[catch "system \"prelink -N -r ${prelink_lib1} ${binfile_lib1}\""] != 0
|| [catch "system \"prelink -N -r ${prelink_lib2} ${binfile_lib2}\""] != 0} {
# Maybe we don't have prelink.
- untested "Could not prelink ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
+ untested "could not prelink ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
return -1
}
@@ -92,7 +92,7 @@ foreach prelink_lib1 {0x40000000 0x50000000} { with_test_prefix "$prelink_lib1"
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib1} $lib_flags] != ""
|| [gdb_compile_shlib ${srcfile_lib} ${binfile_lib2} $lib_flags] != ""} {
- untested "Could not recompile ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
+ untested "could not recompile ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
kill_wait_spawned_process $test_spawn_id
return -1
}
diff --git a/gdb/testsuite/gdb.base/solib-search.exp b/gdb/testsuite/gdb.base/solib-search.exp
index 1a3cb33..9acd347 100644
--- a/gdb/testsuite/gdb.base/solib-search.exp
+++ b/gdb/testsuite/gdb.base/solib-search.exp
@@ -69,7 +69,7 @@ if { [gdb_compile_shlib ${srcfile1_lib} ${wrong_binfile1_lib} $wrong_lib_flags]
|| [gdb_compile_shlib ${srcfile2_lib} ${wrong_binfile2_lib} $wrong_lib_flags] != ""
|| [gdb_compile_shlib ${srcfile1_lib} ${right_binfile1_lib} $right_lib_flags] != ""
|| [gdb_compile_shlib ${srcfile2_lib} ${right_binfile2_lib} $right_lib_flags] != "" } {
- untested "Could not compile libs."
+ untested "could not compile libs."
return -1
}
@@ -78,14 +78,14 @@ remote_exec build "ln -sf ${right_lib_subdir}/${libname1}.so ${binfile1_lib}"
remote_exec build "ln -sf ${right_lib_subdir}/${libname2}.so ${binfile2_lib}"
if { [gdb_compile $srcdir/$subdir/${srcfile} ${binfile} \
executable $bin_flags] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
clean_restart $testfile
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/solib-symbol.exp b/gdb/testsuite/gdb.base/solib-symbol.exp
index 1ff4b3d..2d5631f 100644
--- a/gdb/testsuite/gdb.base/solib-symbol.exp
+++ b/gdb/testsuite/gdb.base/solib-symbol.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
@@ -54,7 +54,7 @@ gdb_test "br foo2" \
delete_breakpoints
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/source-execution.exp b/gdb/testsuite/gdb.base/source-execution.exp
index ca984c7..e1128a4 100644
--- a/gdb/testsuite/gdb.base/source-execution.exp
+++ b/gdb/testsuite/gdb.base/source-execution.exp
@@ -24,7 +24,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp b/gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp
index cc1acea..85c9085 100644
--- a/gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp
+++ b/gdb/testsuite/gdb.base/sss-bp-on-user-bp-2.exp
@@ -38,7 +38,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp b/gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp
index f84d68f..be5c253 100644
--- a/gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp
+++ b/gdb/testsuite/gdb.base/sss-bp-on-user-bp.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/stack-checking.exp b/gdb/testsuite/gdb.base/stack-checking.exp
index 0258cbe..aa68575 100644
--- a/gdb/testsuite/gdb.base/stack-checking.exp
+++ b/gdb/testsuite/gdb.base/stack-checking.exp
@@ -24,7 +24,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [con
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/stale-infcall.exp b/gdb/testsuite/gdb.base/stale-infcall.exp
index b887334..67b42e5 100644
--- a/gdb/testsuite/gdb.base/stale-infcall.exp
+++ b/gdb/testsuite/gdb.base/stale-infcall.exp
@@ -35,7 +35,7 @@ gdb_test_multiple "next" $test {
}
-re "( test-fail .*|\r\nCannot insert breakpoint 0\\.\r\n.*)\r\n$gdb_prompt $" {
xfail $test
- untested "System lacks support for tracking longjmps"
+ untested "system lacks support for tracking longjmps"
return -1
}
}
diff --git a/gdb/testsuite/gdb.base/step-break.exp b/gdb/testsuite/gdb.base/step-break.exp
index ce1bc63..19794cb 100644
--- a/gdb/testsuite/gdb.base/step-break.exp
+++ b/gdb/testsuite/gdb.base/step-break.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/step-line.exp b/gdb/testsuite/gdb.base/step-line.exp
index a7c1511..292dc7c 100644
--- a/gdb/testsuite/gdb.base/step-line.exp
+++ b/gdb/testsuite/gdb.base/step-line.exp
@@ -29,7 +29,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/step-over-exit.exp b/gdb/testsuite/gdb.base/step-over-exit.exp
index 9f4c826..3cf5d0d 100644
--- a/gdb/testsuite/gdb.base/step-over-exit.exp
+++ b/gdb/testsuite/gdb.base/step-over-exit.exp
@@ -39,7 +39,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
# Start with a fresh gdb.
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/step-test.exp b/gdb/testsuite/gdb.base/step-test.exp
index 4bede78..280b892 100644
--- a/gdb/testsuite/gdb.base/step-test.exp
+++ b/gdb/testsuite/gdb.base/step-test.exp
@@ -27,7 +27,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debu
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/structs.exp b/gdb/testsuite/gdb.base/structs.exp
index 4fcef52..912eb82 100644
--- a/gdb/testsuite/gdb.base/structs.exp
+++ b/gdb/testsuite/gdb.base/structs.exp
@@ -20,7 +20,7 @@
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/sym-file.exp b/gdb/testsuite/gdb.base/sym-file.exp
index 6febac3..996ba82 100644
--- a/gdb/testsuite/gdb.base/sym-file.exp
+++ b/gdb/testsuite/gdb.base/sym-file.exp
@@ -76,7 +76,7 @@ if {[prepare_for_testing $testfile $binfile "$srcfile $srcfile2" $exec_opts]} {
gdb_load_shlib ${lib_so}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/symtab-search-order.exp b/gdb/testsuite/gdb.base/symtab-search-order.exp
index f8f9036..c8d058a 100644
--- a/gdb/testsuite/gdb.base/symtab-search-order.exp
+++ b/gdb/testsuite/gdb.base/symtab-search-order.exp
@@ -33,7 +33,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $lib1src $lib1 $lib_opts] != ""
|| [gdb_compile [list $srcfile $srcfile2] $binfile executable \
$exec_opts] != ""} {
- untested "Could not compile $lib1, or $srcfile."
+ untested "could not compile $lib1, or $srcfile."
return -1
}
@@ -43,7 +43,7 @@ clean_restart $binfile
gdb_load_shlib $lib1
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.base/term.exp b/gdb/testsuite/gdb.base/term.exp
index 6d22d0e..bb36977 100644
--- a/gdb/testsuite/gdb.base/term.exp
+++ b/gdb/testsuite/gdb.base/term.exp
@@ -28,7 +28,7 @@ gdb_test "info terminal" \
"test info terminal"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/type-opaque.exp b/gdb/testsuite/gdb.base/type-opaque.exp
index 2b12752..8d9d845 100644
--- a/gdb/testsuite/gdb.base/type-opaque.exp
+++ b/gdb/testsuite/gdb.base/type-opaque.exp
@@ -43,7 +43,7 @@ clean_restart ${binfile}
gdb_load_shlib ${libobj}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/unload.exp b/gdb/testsuite/gdb.base/unload.exp
index c058d3a..aa25697 100644
--- a/gdb/testsuite/gdb.base/unload.exp
+++ b/gdb/testsuite/gdb.base/unload.exp
@@ -52,7 +52,7 @@ set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME=\"${lib_dlope
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""
|| [gdb_compile $srcfile $binfile executable $exec_opts] != ""} {
- untested "Couldn't compile $libsrc or $libsrc2 or $srcfile."
+ untested "couldn't compile $libsrc or $libsrc2 or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/until-nodebug.exp b/gdb/testsuite/gdb.base/until-nodebug.exp
index 8e74a4c..3252941 100644
--- a/gdb/testsuite/gdb.base/until-nodebug.exp
+++ b/gdb/testsuite/gdb.base/until-nodebug.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile nodebug]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/until.exp b/gdb/testsuite/gdb.base/until.exp
index 8df03a7..b9b986c 100644
--- a/gdb/testsuite/gdb.base/until.exp
+++ b/gdb/testsuite/gdb.base/until.exp
@@ -26,7 +26,7 @@ set bp_location20 [gdb_get_line_number "set breakpoint 20 here"]
set bp_location21 [gdb_get_line_number "set breakpoint 21 here"]
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/unwindonsignal.exp b/gdb/testsuite/gdb.base/unwindonsignal.exp
index cf63c6d..1c0661d 100644
--- a/gdb/testsuite/gdb.base/unwindonsignal.exp
+++ b/gdb/testsuite/gdb.base/unwindonsignal.exp
@@ -22,7 +22,7 @@ if [target_info exists gdb,nosignals] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
@@ -34,7 +34,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/watch-cond.exp b/gdb/testsuite/gdb.base/watch-cond.exp
index b046526..f26741f 100644
--- a/gdb/testsuite/gdb.base/watch-cond.exp
+++ b/gdb/testsuite/gdb.base/watch-cond.exp
@@ -30,7 +30,7 @@ if [target_info exists gdb,no_hardware_watchpoints] {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -50,7 +50,7 @@ if [target_info exists gdb,no_hardware_watchpoints] {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -70,7 +70,7 @@ if [target_info exists gdb,no_hardware_watchpoints] {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/watch-non-mem.exp b/gdb/testsuite/gdb.base/watch-non-mem.exp
index e1a5bb8..a773543 100644
--- a/gdb/testsuite/gdb.base/watch-non-mem.exp
+++ b/gdb/testsuite/gdb.base/watch-non-mem.exp
@@ -25,7 +25,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.base/watch_thread_num.exp b/gdb/testsuite/gdb.base/watch_thread_num.exp
index eff9fbd..dce498e 100644
--- a/gdb/testsuite/gdb.base/watch_thread_num.exp
+++ b/gdb/testsuite/gdb.base/watch_thread_num.exp
@@ -60,7 +60,7 @@ gdb_test "continue" ".*Breakpoint .*loop.*" "Stopped in loop"
gdb_test_multiple "thread" "Thread command" {
-re ".*Current thread is (\[0-9\]*).*$gdb_prompt $" {
- pass "Thread command"
+ pass "thread command"
}
}
diff --git a/gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp b/gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp
index 47c40ff..7492115 100644
--- a/gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp
+++ b/gdb/testsuite/gdb.base/watchpoint-reuse-slot.exp
@@ -34,7 +34,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.base/watchpoint-solib.exp b/gdb/testsuite/gdb.base/watchpoint-solib.exp
index bd50064..1ae972f 100644
--- a/gdb/testsuite/gdb.base/watchpoint-solib.exp
+++ b/gdb/testsuite/gdb.base/watchpoint-solib.exp
@@ -42,7 +42,7 @@ set exec_opts [list debug shlib_load additional_flags=-DSHLIB_NAME=\"${lib_dlope
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcfile $binfile executable $exec_opts] != ""} {
- untested "Couldn't compile $libsrc or $srcfile."
+ untested "couldn't compile $libsrc or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp
index e4eab3d..6e262e9 100644
--- a/gdb/testsuite/gdb.base/watchpoint.exp
+++ b/gdb/testsuite/gdb.base/watchpoint.exp
@@ -347,7 +347,7 @@ proc test_watchpoint_triggered_in_syscall {} {
# Run until we get to the first marker function.
set x 0
set y 0
- set testname "Watch buffer passed to read syscall"
+ set testname "watch buffer passed to read syscall"
if [runto marker2] then {
gdb_test "watch buf\[0\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[0\\\]"
gdb_test "watch buf\[1\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[1\\\]"
diff --git a/gdb/testsuite/gdb.btrace/dlopen.exp b/gdb/testsuite/gdb.btrace/dlopen.exp
index 2afb42b..05354f5 100644
--- a/gdb/testsuite/gdb.btrace/dlopen.exp
+++ b/gdb/testsuite/gdb.btrace/dlopen.exp
@@ -26,7 +26,7 @@ set binfile_lib [standard_output_file $basename_lib.so]
if { [gdb_compile_shlib $srcfile_lib $binfile_lib \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib."
+ untested "could not compile $binfile_lib."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/arch.exp b/gdb/testsuite/gdb.cell/arch.exp
index 56d2c73..f328ab6 100644
--- a/gdb/testsuite/gdb.cell/arch.exp
+++ b/gdb/testsuite/gdb.cell/arch.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -61,7 +61,7 @@ gdb_test "show architecture" \
"startup architecture is powerpc:common"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -78,15 +78,15 @@ check_spu_arch ""
send_gdb "thread\n"
gdb_expect 10 {
-re "Current thread is (\[0-9\]*) .*\r\n$gdb_prompt $" {
- pass "Retrieve current thread"
+ pass "retrieve current thread"
set thread_id $expect_out(1,string)
}
-re "$gdb_prompt $" {
- fail "Retrieve current thread"
+ fail "retrieve current thread"
return 0
}
timeout {
- fail "Retrieve current thread (timed out)"
+ fail "retrieve current thread (timed out)"
return 0
}
}
diff --git a/gdb/testsuite/gdb.cell/break.exp b/gdb/testsuite/gdb.cell/break.exp
index 6052479..66ed698 100644
--- a/gdb/testsuite/gdb.cell/break.exp
+++ b/gdb/testsuite/gdb.cell/break.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -67,7 +67,7 @@ gdb_test "break main" \
"breakpoint main in ppu"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -84,7 +84,7 @@ gdb_expect {
-re ".*$spu_file.c.*Make breakpoint pending.*y or \\\[n\\\]. $" {
gdb_test "y" "Breakpoint.*$spu_file.*pending." "set pending breakpoint"
}
- timeout { fail "Timeout while setting breakpoint in spu binary" }
+ timeout { fail "timeout while setting breakpoint in spu binary" }
}
# Check breakpoints.
diff --git a/gdb/testsuite/gdb.cell/bt.exp b/gdb/testsuite/gdb.cell/bt.exp
index cd5d843..ba4e2cf 100644
--- a/gdb/testsuite/gdb.cell/bt.exp
+++ b/gdb/testsuite/gdb.cell/bt.exp
@@ -37,24 +37,24 @@ if {[skip_cell_tests]} {
# Compile SPU binaries.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
if { [gdb_compile_cell_spu $spu2_src $spu2_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_cell_embedspu $spu2_bin $spu2_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o $spu2_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -68,7 +68,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/core.exp b/gdb/testsuite/gdb.cell/core.exp
index 4cd9c7f..68d98bd 100644
--- a/gdb/testsuite/gdb.cell/core.exp
+++ b/gdb/testsuite/gdb.cell/core.exp
@@ -38,16 +38,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/data.exp b/gdb/testsuite/gdb.cell/data.exp
index e373ba4..9da96ab 100644
--- a/gdb/testsuite/gdb.cell/data.exp
+++ b/gdb/testsuite/gdb.cell/data.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -74,7 +74,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/dwarfaddr.exp b/gdb/testsuite/gdb.cell/dwarfaddr.exp
index a733146..37a8192 100644
--- a/gdb/testsuite/gdb.cell/dwarfaddr.exp
+++ b/gdb/testsuite/gdb.cell/dwarfaddr.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $srcfile $binary executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
@@ -40,7 +40,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binary}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/ea-cache.exp b/gdb/testsuite/gdb.cell/ea-cache.exp
index c567f38..a6b2595 100644
--- a/gdb/testsuite/gdb.cell/ea-cache.exp
+++ b/gdb/testsuite/gdb.cell/ea-cache.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -56,7 +56,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/ea-standalone.exp b/gdb/testsuite/gdb.cell/ea-standalone.exp
index 5079f36..9f8f81c 100644
--- a/gdb/testsuite/gdb.cell/ea-standalone.exp
+++ b/gdb/testsuite/gdb.cell/ea-standalone.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $srcfile $binary executable {debug}] != "" } {
- unsupported "Compile spu binary failed, so all tests in this file will automatically fail."
+ unsupported "compile spu binary failed, so all tests in this file will automatically fail."
return -1
}
@@ -40,7 +40,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binary}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/ea-test.exp b/gdb/testsuite/gdb.cell/ea-test.exp
index 6a5afd2..57ed9e2 100644
--- a/gdb/testsuite/gdb.cell/ea-test.exp
+++ b/gdb/testsuite/gdb.cell/ea-test.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $source $binary executable {debug}] != "" } {
- unsupported "Compile spu binary failed, so all tests in this file will automatically fail."
+ unsupported "compile spu binary failed, so all tests in this file will automatically fail."
return -1
}
@@ -40,7 +40,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binary}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/f-regs.exp b/gdb/testsuite/gdb.cell/f-regs.exp
index 6e211a6..512f2d9 100644
--- a/gdb/testsuite/gdb.cell/f-regs.exp
+++ b/gdb/testsuite/gdb.cell/f-regs.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -74,7 +74,7 @@ gdb_test "info all-registers" \
"info all-registers"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/fork.exp b/gdb/testsuite/gdb.cell/fork.exp
index 8437ab9..9e72f54 100644
--- a/gdb/testsuite/gdb.cell/fork.exp
+++ b/gdb/testsuite/gdb.cell/fork.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -57,7 +57,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/gcore.exp b/gdb/testsuite/gdb.cell/gcore.exp
index ca1d20a..ad8e4d6 100644
--- a/gdb/testsuite/gdb.cell/gcore.exp
+++ b/gdb/testsuite/gdb.cell/gcore.exp
@@ -38,16 +38,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -61,7 +61,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/mem-access.exp b/gdb/testsuite/gdb.cell/mem-access.exp
index 4ba5e48..623d166 100644
--- a/gdb/testsuite/gdb.cell/mem-access.exp
+++ b/gdb/testsuite/gdb.cell/mem-access.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -146,7 +146,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/ptype.exp b/gdb/testsuite/gdb.cell/ptype.exp
index 291c7c4..82c381c 100644
--- a/gdb/testsuite/gdb.cell/ptype.exp
+++ b/gdb/testsuite/gdb.cell/ptype.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -56,7 +56,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/registers.exp b/gdb/testsuite/gdb.cell/registers.exp
index 15b5dbf..ced627a 100644
--- a/gdb/testsuite/gdb.cell/registers.exp
+++ b/gdb/testsuite/gdb.cell/registers.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -61,7 +61,7 @@ gdb_test "info all-registers" \
"info all-registers"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/sizeof.exp b/gdb/testsuite/gdb.cell/sizeof.exp
index c576914..721cd4d 100644
--- a/gdb/testsuite/gdb.cell/sizeof.exp
+++ b/gdb/testsuite/gdb.cell/sizeof.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -88,7 +88,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/solib-symbol.exp b/gdb/testsuite/gdb.cell/solib-symbol.exp
index 21070bc..253a20d 100644
--- a/gdb/testsuite/gdb.cell/solib-symbol.exp
+++ b/gdb/testsuite/gdb.cell/solib-symbol.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -57,7 +57,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${ppu_bin}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cell/solib.exp b/gdb/testsuite/gdb.cell/solib.exp
index 05fcd9b..ad43b03 100644
--- a/gdb/testsuite/gdb.cell/solib.exp
+++ b/gdb/testsuite/gdb.cell/solib.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -62,7 +62,7 @@ gdb_test "info sharedlibrary" \
"no shared library is loaded"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.compile/compile-tls.exp b/gdb/testsuite/gdb.compile/compile-tls.exp
index 2156ba6..107600a 100644
--- a/gdb/testsuite/gdb.compile/compile-tls.exp
+++ b/gdb/testsuite/gdb.compile/compile-tls.exp
@@ -22,7 +22,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cp/cp-relocate.exp b/gdb/testsuite/gdb.cp/cp-relocate.exp
index 8fe25f3..e4b9047 100644
--- a/gdb/testsuite/gdb.cp/cp-relocate.exp
+++ b/gdb/testsuite/gdb.cp/cp-relocate.exp
@@ -82,9 +82,9 @@ set caller_addr [get_func_address "caller"]
if { "${func1_addr}" == "${func2_addr}"
|| "${func1_addr}" == "${func2_addr}"
|| "${func2_addr}" == "${caller_addr}" } {
- fail "C++ functions have different addresses"
+ fail "c++ functions have different addresses"
} else {
- pass "C++ functions have different addresses"
+ pass "c++ functions have different addresses"
}
# Figure out the names of the sections containing the template
diff --git a/gdb/testsuite/gdb.cp/exception.exp b/gdb/testsuite/gdb.cp/exception.exp
index 970cf10..5dd3449 100644
--- a/gdb/testsuite/gdb.cp/exception.exp
+++ b/gdb/testsuite/gdb.cp/exception.exp
@@ -91,7 +91,7 @@ set ok 0
gdb_run_cmd
gdb_test_multiple "" "Run to main" {
-re "Temporary breakpoint 4,.*$gdb_prompt $" {
- pass "Run to main"
+ pass "run to main"
set ok 1
}
}
diff --git a/gdb/testsuite/gdb.cp/gdb2495.exp b/gdb/testsuite/gdb.cp/gdb2495.exp
index 0ce1a53..7fe2b12 100644
--- a/gdb/testsuite/gdb.cp/gdb2495.exp
+++ b/gdb/testsuite/gdb.cp/gdb2495.exp
@@ -54,7 +54,7 @@ if [get_compiler_info "c++"] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.cp/local.exp b/gdb/testsuite/gdb.cp/local.exp
index 3312139..62c1fd8 100644
--- a/gdb/testsuite/gdb.cp/local.exp
+++ b/gdb/testsuite/gdb.cp/local.exp
@@ -166,7 +166,7 @@ gdb_test "up" ".*main.*" "up from marker2"
set eol "\[\t \]*\[\r\n\]+\[\t \]*"
gdb_test_multiple "ptype Local" "Local out of scope" {
-re "No symbol \"Local\" in current context.*${gdb_prompt} $" {
- pass "Local out of scope"
+ pass "local out of scope"
}
-re "ptype Local${eol}type = class Local {${eol} public:${eol} int loc1;${eol}.*${eol} char loc_foo\\(char\\);${eol}}${eol}${gdb_prompt} " {
# GCC emits STABS debugging information in a way that doesn't
diff --git a/gdb/testsuite/gdb.cp/mb-inline.exp b/gdb/testsuite/gdb.cp/mb-inline.exp
index f493279..7f4a874 100644
--- a/gdb/testsuite/gdb.cp/mb-inline.exp
+++ b/gdb/testsuite/gdb.cp/mb-inline.exp
@@ -83,7 +83,7 @@ delete_breakpoints
set bp_location [gdb_get_line_number "set multi-line breakpoint here" $hdrfile]
if { ![runto_main] } {
- fail "Can't run to main for multi_line_foo tests."
+ fail "can't run to main for multi_line_foo tests."
return 0
}
diff --git a/gdb/testsuite/gdb.cp/mb-templates.exp b/gdb/testsuite/gdb.cp/mb-templates.exp
index 2bc90b7..a17adf0 100644
--- a/gdb/testsuite/gdb.cp/mb-templates.exp
+++ b/gdb/testsuite/gdb.cp/mb-templates.exp
@@ -117,7 +117,7 @@ delete_breakpoints
set bp_location [gdb_get_line_number "set multi-line breakpoint here"]
if { ![runto_main] } {
- fail "Can't run to main for multi_line_foo tests."
+ fail "can't run to main for multi_line_foo tests."
return 0
}
diff --git a/gdb/testsuite/gdb.cp/pr10687.exp b/gdb/testsuite/gdb.cp/pr10687.exp
index e7caa7f..385e64a 100644
--- a/gdb/testsuite/gdb.cp/pr10687.exp
+++ b/gdb/testsuite/gdb.cp/pr10687.exp
@@ -20,7 +20,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug c++}]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.cp/pr9167.exp b/gdb/testsuite/gdb.cp/pr9167.exp
index f7701fb..cdd7d2a 100644
--- a/gdb/testsuite/gdb.cp/pr9167.exp
+++ b/gdb/testsuite/gdb.cp/pr9167.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug c++}]} {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.cp/scope-err.exp b/gdb/testsuite/gdb.cp/scope-err.exp
index b197829..7b11fad 100644
--- a/gdb/testsuite/gdb.cp/scope-err.exp
+++ b/gdb/testsuite/gdb.cp/scope-err.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile $exefile $srcfile {debug c++}]} {
}
if {![runto_main]} {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.cp/templates.exp b/gdb/testsuite/gdb.cp/templates.exp
index c503598..8a60c6d 100644
--- a/gdb/testsuite/gdb.cp/templates.exp
+++ b/gdb/testsuite/gdb.cp/templates.exp
@@ -184,7 +184,7 @@ proc test_template_calls {} {
global gdb_prompt
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
diff --git a/gdb/testsuite/gdb.cp/virtfunc.exp b/gdb/testsuite/gdb.cp/virtfunc.exp
index 04fe5aa..2776b0a 100644
--- a/gdb/testsuite/gdb.cp/virtfunc.exp
+++ b/gdb/testsuite/gdb.cp/virtfunc.exp
@@ -177,7 +177,7 @@ proc test_virtual_calls {} {
global nl
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return 0
}
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp b/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
index 2f17556..313b56f 100644
--- a/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
+++ b/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
@@ -327,7 +327,7 @@ lappend opts "additional_flags=-DFDIR=\"fdir\""
lappend opts "additional_flags=-DFILE=\"${srctmpfile}\""
if { [gdb_compile "${asmsrcfile} ${srcdir}/${subdir}/$srcfile" "${binfile}" executable $opts] != "" } {
- untested "Cannot compile ${asmsrcfile} or $srcfile"
+ untested "cannot compile ${asmsrcfile} or $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp b/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
index bb7b53e..a10c5fa 100644
--- a/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
+++ b/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
@@ -36,7 +36,7 @@ if { [prepare_for_testing "${testfile}.exp" "${testfile}" $srcfile {nodebug}] }
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
continue
}
diff --git a/gdb/testsuite/gdb.fortran/complex.exp b/gdb/testsuite/gdb.fortran/complex.exp
index 2d94e42..7046ba2 100644
--- a/gdb/testsuite/gdb.fortran/complex.exp
+++ b/gdb/testsuite/gdb.fortran/complex.exp
@@ -16,7 +16,7 @@
standard_testfile .f
if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug f90 quiet}]} {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.fortran/library-module.exp b/gdb/testsuite/gdb.fortran/library-module.exp
index 8a913ed..e2f03c3 100644
--- a/gdb/testsuite/gdb.fortran/library-module.exp
+++ b/gdb/testsuite/gdb.fortran/library-module.exp
@@ -24,7 +24,7 @@ if [get_compiler_info] {
}
if { [gdb_compile_shlib "${srcdir}/${subdir}/${srclibfile}" $libfile {debug f90}] != "" } {
- untested "Couldn't compile ${srclibfile}"
+ untested "couldn't compile ${srclibfile}"
return -1
}
@@ -33,7 +33,7 @@ if { [gdb_compile_shlib "${srcdir}/${subdir}/${srclibfile}" $libfile {debug f90
# warnings on ignored $libfile abort the process.
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable [list debug f90 shlib=$libfile]] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.guile/guile.exp b/gdb/testsuite/gdb.guile/guile.exp
index 6f4374b..37347b7 100644
--- a/gdb/testsuite/gdb.guile/guile.exp
+++ b/gdb/testsuite/gdb.guile/guile.exp
@@ -27,7 +27,7 @@ gdb_reinitialize_dir $srcdir/$subdir
# We want to do some tests when Guile is not present.
gdb_test_multiple "guile (display 23) (newline)" "verify guile support" {
-re "Undefined command.*$gdb_prompt $" {
- unsupported "Guile not supported."
+ unsupported "guile not supported."
return
}
-re "not supported.*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.guile/scm-cmd.exp b/gdb/testsuite/gdb.guile/scm-cmd.exp
index bf14dd0..5b1174c 100644
--- a/gdb/testsuite/gdb.guile/scm-cmd.exp
+++ b/gdb/testsuite/gdb.guile/scm-cmd.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_guile_tests] } { continue }
if ![gdb_guile_runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.guile/scm-frame-inline.exp b/gdb/testsuite/gdb.guile/scm-frame-inline.exp
index 93caaa7..f1d58ed 100644
--- a/gdb/testsuite/gdb.guile/scm-frame-inline.exp
+++ b/gdb/testsuite/gdb.guile/scm-frame-inline.exp
@@ -25,7 +25,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_guile_tests] } { continue }
if ![runto main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.guile/scm-objfile.exp b/gdb/testsuite/gdb.guile/scm-objfile.exp
index 95e67ac..d99a519 100644
--- a/gdb/testsuite/gdb.guile/scm-objfile.exp
+++ b/gdb/testsuite/gdb.guile/scm-objfile.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_guile_tests] } { continue }
if ![gdb_guile_runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.guile/scm-pretty-print.exp b/gdb/testsuite/gdb.guile/scm-pretty-print.exp
index e2554a9..f17d827 100644
--- a/gdb/testsuite/gdb.guile/scm-pretty-print.exp
+++ b/gdb/testsuite/gdb.guile/scm-pretty-print.exp
@@ -30,7 +30,7 @@ if { [skip_guile_tests] } { continue }
proc run_lang_tests {exefile lang} {
global srcdir subdir srcfile testfile hex
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return
}
diff --git a/gdb/testsuite/gdb.guile/scm-symbol.exp b/gdb/testsuite/gdb.guile/scm-symbol.exp
index de5747a..e143045 100644
--- a/gdb/testsuite/gdb.guile/scm-symbol.exp
+++ b/gdb/testsuite/gdb.guile/scm-symbol.exp
@@ -138,7 +138,7 @@ gdb_test "guile (print (symbol-symtab t))" "= #<gdb:symtab .*gdb.guile/scm-symbo
# C++ tests
# Recompile binary.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}-cxx" executable "debug c++"] != "" } {
- untested "Couldn't compile ${srcfile} in c++ mode"
+ untested "couldn't compile ${srcfile} in c++ mode"
return -1
}
diff --git a/gdb/testsuite/gdb.guile/scm-type.exp b/gdb/testsuite/gdb.guile/scm-type.exp
index 87e85db..455d948 100644
--- a/gdb/testsuite/gdb.guile/scm-type.exp
+++ b/gdb/testsuite/gdb.guile/scm-type.exp
@@ -30,7 +30,7 @@ proc build_inferior {exefile lang} {
global srcdir subdir srcfile
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return -1
}
return 0
diff --git a/gdb/testsuite/gdb.guile/scm-value.exp b/gdb/testsuite/gdb.guile/scm-value.exp
index 1d07c9f..282a1ce 100644
--- a/gdb/testsuite/gdb.guile/scm-value.exp
+++ b/gdb/testsuite/gdb.guile/scm-value.exp
@@ -39,7 +39,7 @@ proc build_inferior {exefile lang} {
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object "debug $lang"] != ""
|| [gdb_compile "${objfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return -1
}
return 0
@@ -320,7 +320,7 @@ proc test_subscript_regression {exefile lang} {
clean_restart ${exefile}
if ![gdb_guile_runto_main ] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
@@ -450,7 +450,7 @@ test_value_hash
# The following tests require execution.
if ![gdb_guile_runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.linespec/keywords.exp b/gdb/testsuite/gdb.linespec/keywords.exp
index 11e2c4c..7baf641 100644
--- a/gdb/testsuite/gdb.linespec/keywords.exp
+++ b/gdb/testsuite/gdb.linespec/keywords.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing $testfile $exefile $srcfile {debug}]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.linespec/ls-errs.exp b/gdb/testsuite/gdb.linespec/ls-errs.exp
index bc4ca26..4276aa2 100644
--- a/gdb/testsuite/gdb.linespec/ls-errs.exp
+++ b/gdb/testsuite/gdb.linespec/ls-errs.exp
@@ -48,7 +48,7 @@ proc do_test {lang} {
gdb_test_no_output "set max-completions unlimited"
if {![runto_main]} {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.linespec/macro-relative.exp b/gdb/testsuite/gdb.linespec/macro-relative.exp
index 8eef3b6..4c6885a 100644
--- a/gdb/testsuite/gdb.linespec/macro-relative.exp
+++ b/gdb/testsuite/gdb.linespec/macro-relative.exp
@@ -22,7 +22,7 @@ if [using_fission] {
}
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.linespec/thread.exp b/gdb/testsuite/gdb.linespec/thread.exp
index d3cefb7..a469f27 100644
--- a/gdb/testsuite/gdb.linespec/thread.exp
+++ b/gdb/testsuite/gdb.linespec/thread.exp
@@ -24,7 +24,7 @@ if {[prepare_for_testing $testfile $exefile $srcfile {debug}]} {
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp b/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
index cda8c4a..dc42720 100644
--- a/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
+++ b/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
@@ -31,7 +31,7 @@ set lib_opts "debug"
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
@@ -39,7 +39,7 @@ set MIFLAGS "-i=mi"
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp b/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
index 12a91cd..b1c870e 100644
--- a/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
+++ b/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
@@ -36,12 +36,12 @@ if {[get_compiler_info]} {
}
if {[gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""} {
- untested "Could not compile $libsrc1"
+ untested "could not compile $libsrc1"
return -1
}
if {[gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile $srcdir/$subdir/$srcfile"
+ untested "could not compile $srcdir/$subdir/$srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp b/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
index 884a19b..d538c68 100644
--- a/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
+++ b/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
@@ -26,13 +26,13 @@ set srcfileabs [standard_output_file $srcfile]
# "//$srcfile" It is used for the test of compare_filenames_for_search.
if { [regsub {/[^/]+$} $srcfileabs {/\0} srcfileabs] != 1 } {
- xfail "Cannot double the last slash separator"
+ xfail "cannot double the last slash separator"
return -1
}
if { [regsub {^(/[^/]+)/} $srcfileabs {\1subst/} srcfileabssubst] != 1
|| [regsub {^(/[^/]+)/.*$} $srcfileabs {\1} initdir] != 1 } {
- xfail "Missing root subdirectory"
+ xfail "missing root subdirectory"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-logging.exp b/gdb/testsuite/gdb.mi/mi-logging.exp
index b66f5c2..8babed0 100644
--- a/gdb/testsuite/gdb.mi/mi-logging.exp
+++ b/gdb/testsuite/gdb.mi/mi-logging.exp
@@ -54,9 +54,9 @@ close $chan
set mi_log_prompt "\[(\]gdb\[)\] \[\r\n\]+"
if [regexp "\\^done\[\r\n\]+$mi_log_prompt\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt" $logcontent] {
- pass "Log file contents"
+ pass "log file contents"
} else {
- fail "Log file contents"
+ fail "log file contents"
}
# Now try the redirect, which writes into the file only.
@@ -77,9 +77,9 @@ set logcontent [read $chan]
close $chan
if [regexp "1001\\^done\[\r\n\]+$mi_log_prompt.*1002\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt.*1003\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt" $logcontent] {
- pass "Redirect log file contents"
+ pass "redirect log file contents"
} else {
- fail "Redirect log file contents"
+ fail "redirect log file contents"
}
mi_gdb_exit
diff --git a/gdb/testsuite/gdb.mi/mi-pending.exp b/gdb/testsuite/gdb.mi/mi-pending.exp
index 48487ce..668572c 100644
--- a/gdb/testsuite/gdb.mi/mi-pending.exp
+++ b/gdb/testsuite/gdb.mi/mi-pending.exp
@@ -41,12 +41,12 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
if { [gdb_compile_pthreads $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile $srcdir/$subdir/$srcfile."
+ untested "could not compile $srcdir/$subdir/$srcfile."
return -1
}
@@ -111,7 +111,7 @@ mi_gdb_test "-break-insert -p 2 -f pendfunc3" \
mi_send_resuming_command "exec-continue" "continuing execution to thread condition"
# Check if we stopped in thread 2 like we should.
-set testname "Run till MI pending breakpoint on pendfunc3 on thread 2"
+set testname "run till MI pending breakpoint on pendfunc3 on thread 2"
gdb_expect {
-re "\\*stopped,reason=\"breakpoint-hit\",disp=\"keep\",bkptno=\"4\",frame=\{addr=\"$hex\",func=\"pendfunc3\".*thread-id=\"2\".*" {
pass $testname
diff --git a/gdb/testsuite/gdb.mi/mi-solib.exp b/gdb/testsuite/gdb.mi/mi-solib.exp
index 2227987..a867206 100644
--- a/gdb/testsuite/gdb.mi/mi-solib.exp
+++ b/gdb/testsuite/gdb.mi/mi-solib.exp
@@ -42,7 +42,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile_main} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
@@ -61,7 +61,7 @@ mi_gdb_test "777-gdb-set stop-on-solib-events 1" "777\\^done" \
mi_run_with_cli
# Also test that the CLI solib event note is output.
-set test "CLI prints solib event"
+set test "cli prints solib event"
gdb_expect {
-re "~\"Stopped due to shared library event \\(no libraries added or removed\\)\\\\n" {
pass "$test"
diff --git a/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp b/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
index 55c66a5..b0f6c31 100644
--- a/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
+++ b/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
@@ -40,7 +40,7 @@ proc do_test {sync_command} {
mi_gdb_exit
if {[mi_gdb_start "separate-mi-tty"] != 0} {
- fail "Could not start gdb"
+ fail "could not start gdb"
return
}
diff --git a/gdb/testsuite/gdb.mi/user-selected-context-sync.exp b/gdb/testsuite/gdb.mi/user-selected-context-sync.exp
index d3f75d8..ef94775 100644
--- a/gdb/testsuite/gdb.mi/user-selected-context-sync.exp
+++ b/gdb/testsuite/gdb.mi/user-selected-context-sync.exp
@@ -396,7 +396,7 @@ proc_with_prefix test_setup { mode } {
mi_gdb_load $binfile
if { [mi_runto main] < 0 } {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.multi/dummy-frame-restore.exp b/gdb/testsuite/gdb.multi/dummy-frame-restore.exp
index a0dddf5..e0b7c41 100644
--- a/gdb/testsuite/gdb.multi/dummy-frame-restore.exp
+++ b/gdb/testsuite/gdb.multi/dummy-frame-restore.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug}]} {
# Inferior 1 stops at f1.
if ![runto f1] then {
- fail "Can't run to f1"
+ fail "can't run to f1"
return 0
}
@@ -42,7 +42,7 @@ delete_breakpoints
# Inferior 2 stops at f2.
if ![runto f2] then {
- fail "Can't run to f2"
+ fail "can't run to f2"
return 0
}
diff --git a/gdb/testsuite/gdb.multi/multi-arch-exec.exp b/gdb/testsuite/gdb.multi/multi-arch-exec.exp
index 88e5a62..ba14c23 100644
--- a/gdb/testsuite/gdb.multi/multi-arch-exec.exp
+++ b/gdb/testsuite/gdb.multi/multi-arch-exec.exp
@@ -64,7 +64,7 @@ if { [istarget "aarch64*-*-*"] } {
if {[info exists ARM_CC_FOR_TARGET]} {
lappend options "compiler=${ARM_CC_FOR_TARGET}"
} else {
- unsupported "ARM compiler is not known"
+ unsupported "arm compiler is not known"
return -1
}
} else {
@@ -78,7 +78,7 @@ if { [prepare_for_testing ${testfile}.exp ${exec2} "${srcfile2}" \
clean_restart ${exec1}
if ![runto_main] then {
- fail "Couldn't run to main"
+ fail "couldn't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.multi/multi-arch.exp b/gdb/testsuite/gdb.multi/multi-arch.exp
index b114a2f..32d84ca 100644
--- a/gdb/testsuite/gdb.multi/multi-arch.exp
+++ b/gdb/testsuite/gdb.multi/multi-arch.exp
@@ -63,7 +63,7 @@ if [istarget "aarch64*-*-*"] {
if {[info exists ARM_CC_FOR_TARGET]} {
lappend options "compiler=${ARM_CC_FOR_TARGET}"
} else {
- unsupported "ARM compiler is not known"
+ unsupported "arm compiler is not known"
return -1
}
} else {
diff --git a/gdb/testsuite/gdb.multi/remove-inferiors.exp b/gdb/testsuite/gdb.multi/remove-inferiors.exp
index d46beec..fe7d0bf 100644
--- a/gdb/testsuite/gdb.multi/remove-inferiors.exp
+++ b/gdb/testsuite/gdb.multi/remove-inferiors.exp
@@ -53,7 +53,7 @@ proc test_remove_inferiors { } {
"load binary"
if {![runto_main]} {
- fail "Couldn't run to main."
+ fail "couldn't run to main."
return
}
diff --git a/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp b/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp
index e811422..2267413 100644
--- a/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp
+++ b/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp
@@ -35,7 +35,7 @@ proc do_test {dispose} {
gdb_test_no_output "set detach-on-fork off"
if ![runto "child_function"] {
- fail "Can't run to child_function"
+ fail "can't run to child_function"
return
}
diff --git a/gdb/testsuite/gdb.opt/solib-intra-step.exp b/gdb/testsuite/gdb.opt/solib-intra-step.exp
index c8c156f..d6ec632 100644
--- a/gdb/testsuite/gdb.opt/solib-intra-step.exp
+++ b/gdb/testsuite/gdb.opt/solib-intra-step.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.perf/backtrace.exp b/gdb/testsuite/gdb.perf/backtrace.exp
index eb94fb9..412e20c 100644
--- a/gdb/testsuite/gdb.perf/backtrace.exp
+++ b/gdb/testsuite/gdb.perf/backtrace.exp
@@ -52,7 +52,7 @@ PerfTest::assemble {
clean_restart $binfile
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.perf/single-step.exp b/gdb/testsuite/gdb.perf/single-step.exp
index c2af8c9..1cc94ee 100644
--- a/gdb/testsuite/gdb.perf/single-step.exp
+++ b/gdb/testsuite/gdb.perf/single-step.exp
@@ -44,7 +44,7 @@ PerfTest::assemble {
clean_restart $binfile
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
return 0
diff --git a/gdb/testsuite/gdb.perf/skip-command.exp b/gdb/testsuite/gdb.perf/skip-command.exp
index d251725..755b3bf 100644
--- a/gdb/testsuite/gdb.perf/skip-command.exp
+++ b/gdb/testsuite/gdb.perf/skip-command.exp
@@ -94,7 +94,7 @@ proc run_skip_bench { kind text } {
global SKIP_STEP_COUNT SKIP_DIRECTIVE_COUNT
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.perf/skip-prologue.exp b/gdb/testsuite/gdb.perf/skip-prologue.exp
index 2d942fc..2c4aad4 100644
--- a/gdb/testsuite/gdb.perf/skip-prologue.exp
+++ b/gdb/testsuite/gdb.perf/skip-prologue.exp
@@ -49,7 +49,7 @@ PerfTest::assemble {
clean_restart $binfile
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
return 0
diff --git a/gdb/testsuite/gdb.perf/solib.exp b/gdb/testsuite/gdb.perf/solib.exp
index 06a606c..e2b4baa 100644
--- a/gdb/testsuite/gdb.perf/solib.exp
+++ b/gdb/testsuite/gdb.perf/solib.exp
@@ -77,7 +77,7 @@ PerfTest::assemble {
clean_restart $binfile
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
return 0
diff --git a/gdb/testsuite/gdb.python/lib-types.exp b/gdb/testsuite/gdb.python/lib-types.exp
index 003b218..f095718 100644
--- a/gdb/testsuite/gdb.python/lib-types.exp
+++ b/gdb/testsuite/gdb.python/lib-types.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug c++}]} {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-as-string.exp b/gdb/testsuite/gdb.python/py-as-string.exp
index 4c7dd0d..2b48501 100644
--- a/gdb/testsuite/gdb.python/py-as-string.exp
+++ b/gdb/testsuite/gdb.python/py-as-string.exp
@@ -25,7 +25,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
}
if ![runto_main] {
- fail "Couldn't run to main."
+ fail "couldn't run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-bad-printers.exp b/gdb/testsuite/gdb.python/py-bad-printers.exp
index 6f67798..1449820 100644
--- a/gdb/testsuite/gdb.python/py-bad-printers.exp
+++ b/gdb/testsuite/gdb.python/py-bad-printers.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
if { [skip_python_tests] } { continue }
if ![runto_main ] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-block.exp b/gdb/testsuite/gdb.python/py-block.exp
index 2bd987e..45e4f07 100644
--- a/gdb/testsuite/gdb.python/py-block.exp
+++ b/gdb/testsuite/gdb.python/py-block.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-breakpoint.exp b/gdb/testsuite/gdb.python/py-breakpoint.exp
index d4a1a48..7503f5a 100644
--- a/gdb/testsuite/gdb.python/py-breakpoint.exp
+++ b/gdb/testsuite/gdb.python/py-breakpoint.exp
@@ -38,7 +38,7 @@ proc test_bkpt_basic { } {
gdb_test "python print (gdb.breakpoints())" "\\(\\)"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -123,7 +123,7 @@ proc test_bkpt_deletion { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -161,7 +161,7 @@ proc test_bkpt_cond_and_cmds { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -213,7 +213,7 @@ proc test_bkpt_invisible { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -263,7 +263,7 @@ proc test_watchpoints { } {
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -288,7 +288,7 @@ proc test_bkpt_internal { } {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
@@ -318,7 +318,7 @@ proc test_bkpt_eval_funcs { } {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
@@ -434,7 +434,7 @@ proc test_bkpt_temporary { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
diff --git a/gdb/testsuite/gdb.python/py-cmd.exp b/gdb/testsuite/gdb.python/py-cmd.exp
index 4742c44..0665b8e 100644
--- a/gdb/testsuite/gdb.python/py-cmd.exp
+++ b/gdb/testsuite/gdb.python/py-cmd.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-events.exp b/gdb/testsuite/gdb.python/py-events.exp
index de8de07..547870a 100644
--- a/gdb/testsuite/gdb.python/py-events.exp
+++ b/gdb/testsuite/gdb.python/py-events.exp
@@ -34,7 +34,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-evthreads.exp b/gdb/testsuite/gdb.python/py-evthreads.exp
index 93ff83d..c14b49a 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.exp
+++ b/gdb/testsuite/gdb.python/py-evthreads.exp
@@ -46,7 +46,7 @@ gdb_breakpoint "thread2"
gdb_breakpoint "thread3"
gdb_run_cmd
-set test "Run to breakpoint 1"
+set test "run to breakpoint 1"
gdb_test_multiple "" $test {
-re "event type: stop\r\nstop reason: breakpoint\r\nfirst breakpoint number: 1\r\nbreakpoint number: 1\r\nthread num: 1\r\n.*$gdb_prompt $" {
pass $test
diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
index 81c7bbd..218baed 100644
--- a/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
+++ b/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
@@ -37,7 +37,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
@@ -64,7 +64,7 @@ clean_restart ${testfile}
gdb_load_shlib ${lib_sl}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -115,7 +115,7 @@ gdb_test "source $python_file" "Python script imported.*" \
set cond_line [gdb_get_line_number "Condition Break."]
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -168,7 +168,7 @@ gdb_test "source $python_file" "Python script imported.*" \
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -193,7 +193,7 @@ gdb_test "source $python_file" "Python script imported.*" \
"import python scripts"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -220,7 +220,7 @@ gdb_test "source $python_file" "Python script imported.*" \
"import python scripts"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -247,7 +247,7 @@ gdb_test "print increase(&i)" \
#
if ![runto "test_exec_exit"] then {
- fail "Cannot run to test_exec_exit."
+ fail "cannot run to test_exec_exit."
return 0
}
@@ -260,7 +260,7 @@ gdb_test "continue" "SimpleFinishBreakpoint out of scope.*" "catch out of scope
#
if ![runto "test_exec_exit"] then {
- fail "Cannot run to test_exec_exit."
+ fail "cannot run to test_exec_exit."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
index 0e8c492..8859d71 100644
--- a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
+++ b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug c++}]} {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-frame-inline.exp b/gdb/testsuite/gdb.python/py-frame-inline.exp
index 1372ee0..98d349d 100644
--- a/gdb/testsuite/gdb.python/py-frame-inline.exp
+++ b/gdb/testsuite/gdb.python/py-frame-inline.exp
@@ -25,7 +25,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_python_tests] } { continue }
if ![runto main] then {
- fail "Can't run to function f"
+ fail "can't run to function f"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-frame.exp b/gdb/testsuite/gdb.python/py-frame.exp
index b5a4682..f2a9907 100644
--- a/gdb/testsuite/gdb.python/py-frame.exp
+++ b/gdb/testsuite/gdb.python/py-frame.exp
@@ -30,7 +30,7 @@ if { [skip_python_tests] } { continue }
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-inferior.exp b/gdb/testsuite/gdb.python/py-inferior.exp
index 9b90d0b..ced81c6 100644
--- a/gdb/testsuite/gdb.python/py-inferior.exp
+++ b/gdb/testsuite/gdb.python/py-inferior.exp
@@ -44,7 +44,7 @@ gdb_test_multiple "show endian" "getting target endian" {
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-infthread.exp b/gdb/testsuite/gdb.python/py-infthread.exp
index 11f8d21..9292d28 100644
--- a/gdb/testsuite/gdb.python/py-infthread.exp
+++ b/gdb/testsuite/gdb.python/py-infthread.exp
@@ -33,7 +33,7 @@ if { [skip_python_tests] } { continue }
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-mi.exp b/gdb/testsuite/gdb.python/py-mi.exp
index 138aa2d..6bbc510 100644
--- a/gdb/testsuite/gdb.python/py-mi.exp
+++ b/gdb/testsuite/gdb.python/py-mi.exp
@@ -321,7 +321,7 @@ mi_gdb_test "-var-update c" \
gdb_exit
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}-cxx" \
executable {debug c++ additional_flags=-DMI}] != "" } {
- untested "Couldn't compile ${srcfile} in c++ mode"
+ untested "couldn't compile ${srcfile} in c++ mode"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-objfile.exp b/gdb/testsuite/gdb.python/py-objfile.exp
index 62ca309..9f7ded9 100644
--- a/gdb/testsuite/gdb.python/py-objfile.exp
+++ b/gdb/testsuite/gdb.python/py-objfile.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -104,7 +104,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile}2 ${srcfile} {nodebug ldfla
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-pp-maint.exp b/gdb/testsuite/gdb.python/py-pp-maint.exp
index a424931..5bddfa2 100644
--- a/gdb/testsuite/gdb.python/py-pp-maint.exp
+++ b/gdb/testsuite/gdb.python/py-pp-maint.exp
@@ -33,7 +33,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
if { [skip_python_tests] } { continue }
if ![runto_main ] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-pp-registration.exp b/gdb/testsuite/gdb.python/py-pp-registration.exp
index 95e43b7..2a8796c 100644
--- a/gdb/testsuite/gdb.python/py-pp-registration.exp
+++ b/gdb/testsuite/gdb.python/py-pp-registration.exp
@@ -31,7 +31,7 @@ set remote_python_file [gdb_remote_download host \
${srcdir}/${subdir}/${testfile}.py]
if ![runto_main ] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-prettyprint.exp b/gdb/testsuite/gdb.python/py-prettyprint.exp
index 91b9b0d..86491e4 100644
--- a/gdb/testsuite/gdb.python/py-prettyprint.exp
+++ b/gdb/testsuite/gdb.python/py-prettyprint.exp
@@ -30,7 +30,7 @@ if { [skip_python_tests] } { continue }
proc run_lang_tests {exefile lang} {
global srcdir subdir srcfile testfile hex
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-recurse-unwind.exp b/gdb/testsuite/gdb.python/py-recurse-unwind.exp
index 9629a97..97dce08 100644
--- a/gdb/testsuite/gdb.python/py-recurse-unwind.exp
+++ b/gdb/testsuite/gdb.python/py-recurse-unwind.exp
@@ -41,7 +41,7 @@ gdb_test "source ${pyfile}" "Python script imported" \
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-shared.exp b/gdb/testsuite/gdb.python/py-shared.exp
index 4a0c738..3e049b3 100644
--- a/gdb/testsuite/gdb.python/py-shared.exp
+++ b/gdb/testsuite/gdb.python/py-shared.exp
@@ -28,14 +28,14 @@ set libsrc ${libfile}.c
set library [standard_output_file ${libfile}.sl]
if { [gdb_compile_shlib ${srcdir}/${subdir}/${libsrc} ${library} "debug"] != "" } {
- untested "Could not compile shared library."
+ untested "could not compile shared library."
return -1
}
set exec_opts [list debug shlib=${library}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
@@ -49,7 +49,7 @@ if { [skip_python_tests] } { continue }
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-symbol.exp b/gdb/testsuite/gdb.python/py-symbol.exp
index 4cdb3b8..41c4a9e 100644
--- a/gdb/testsuite/gdb.python/py-symbol.exp
+++ b/gdb/testsuite/gdb.python/py-symbol.exp
@@ -50,7 +50,7 @@ gdb_test "python print (gdb.lookup_global_symbol('qq').needs_frame)" \
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -127,7 +127,7 @@ gdb_test "python print (t\[0\].symtab)" "${py_symbol_c}" "Get symtab"
# C++ tests
# Recompile binary.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}-cxx" executable "debug c++"] != "" } {
- untested "Couldn't compile ${srcfile} in c++ mode"
+ untested "couldn't compile ${srcfile} in c++ mode"
return -1
}
@@ -138,7 +138,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}-cxx
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -167,7 +167,7 @@ gdb_test "python print (cplusfunc.addr_class == gdb.SYMBOL_LOC_BLOCK)" "True" "T
# Start with a fresh gdb.
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-symtab.exp b/gdb/testsuite/gdb.python/py-symtab.exp
index efb2cb9..95c83c9 100644
--- a/gdb/testsuite/gdb.python/py-symtab.exp
+++ b/gdb/testsuite/gdb.python/py-symtab.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-template.exp b/gdb/testsuite/gdb.python/py-template.exp
index ea50f49..28a5177 100644
--- a/gdb/testsuite/gdb.python/py-template.exp
+++ b/gdb/testsuite/gdb.python/py-template.exp
@@ -21,7 +21,7 @@ if { [skip_cplus_tests] } { continue }
standard_testfile .cc
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable \
{debug c++}] != "" } {
- untested "Couldn't compile ${srcfile}"
+ untested "couldn't compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-type.exp b/gdb/testsuite/gdb.python/py-type.exp
index 709c587..61c8c2f 100644
--- a/gdb/testsuite/gdb.python/py-type.exp
+++ b/gdb/testsuite/gdb.python/py-type.exp
@@ -29,7 +29,7 @@ proc build_inferior {exefile lang} {
global srcdir subdir srcfile testfile hex
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-unwind-maint.exp b/gdb/testsuite/gdb.python/py-unwind-maint.exp
index 1253057..cf78236 100644
--- a/gdb/testsuite/gdb.python/py-unwind-maint.exp
+++ b/gdb/testsuite/gdb.python/py-unwind-maint.exp
@@ -30,7 +30,7 @@ if { [skip_python_tests] } { continue }
set pyfile [gdb_remote_download host ${srcdir}/${subdir}/${testfile}.py]
if ![runto_main ] then {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-unwind.exp b/gdb/testsuite/gdb.python/py-unwind.exp
index e31a472..80ee680 100644
--- a/gdb/testsuite/gdb.python/py-unwind.exp
+++ b/gdb/testsuite/gdb.python/py-unwind.exp
@@ -33,7 +33,7 @@ if { ![istarget x86_64-*-* ] || ![is_lp64_target] } { continue }
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-value.exp b/gdb/testsuite/gdb.python/py-value.exp
index 39b0385..5395f8c 100644
--- a/gdb/testsuite/gdb.python/py-value.exp
+++ b/gdb/testsuite/gdb.python/py-value.exp
@@ -39,7 +39,7 @@ proc build_inferior {exefile lang} {
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object "debug $lang"] != ""
|| [gdb_compile "${objfile}" "${exefile}" executable "debug $lang"] != "" } {
- untested "Couldn't compile ${srcfile} in $lang mode"
+ untested "couldn't compile ${srcfile} in $lang mode"
return -1
}
return 0
@@ -528,7 +528,7 @@ test_value_hash
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.python/python.exp b/gdb/testsuite/gdb.python/python.exp
index 4072fa3..2ff1f14 100644
--- a/gdb/testsuite/gdb.python/python.exp
+++ b/gdb/testsuite/gdb.python/python.exp
@@ -203,7 +203,7 @@ clean_restart ${testfile}
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -324,7 +324,7 @@ gdb_test_multiple "set prompt blah " "set blah in GDB" {
gdb_test_multiple "python gdb.prompt_hook = None" "Delete hook" {
-re "\[\r\n\]$newprompt2 $" {
- pass "Delete old hook"
+ pass "delete old hook"
}
}
@@ -391,7 +391,7 @@ clean_restart ${testfile}
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -447,7 +447,7 @@ clean_restart ${testfile}
# The following tests require execution.
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
index 1dff8e1..795a313 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
@@ -30,7 +30,7 @@ if { [prepare_for_testing $testfile.exp "$testfile" $srcfile] } {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.reverse/insn-reverse.exp b/gdb/testsuite/gdb.reverse/insn-reverse.exp
index f52b40c..a252959 100644
--- a/gdb/testsuite/gdb.reverse/insn-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/insn-reverse.exp
@@ -119,7 +119,7 @@ proc test { func } {
set n_testcases [get_integer_valueof "n_testcases" 0]
if { ${n_testcases} == 0 } {
- untested "No test"
+ untested "no test"
return 1
}
diff --git a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
index e06eb7e..e0cfcf7 100644
--- a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
+++ b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
@@ -34,7 +34,7 @@ if { [prepare_for_testing $testfile.exp $testfile $srcfile] } {
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.reverse/solib-precsave.exp b/gdb/testsuite/gdb.reverse/solib-precsave.exp
index 6ce26eb..3d1f4cb 100644
--- a/gdb/testsuite/gdb.reverse/solib-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/solib-precsave.exp
@@ -40,12 +40,12 @@ if [get_compiler_info] {
# Compile the first without debug info so that
# stepping and reverse stepping doesn't end up inside them.
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib1src} ${library1} ""] != "" } {
- untested "Could not compile shared library1."
+ untested "could not compile shared library1."
return -1
}
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib2src} ${library2} "debug"] != "" } {
- untested "Could not compile shared library2."
+ untested "could not compile shared library2."
return -1
}
@@ -58,7 +58,7 @@ set exec_opts [list debug shlib=${library1} shlib=${library2}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable \
[concat $exec_opts additional_flags=-Wl,-z,norelro]] != ""
&& [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.reverse/solib-reverse.exp b/gdb/testsuite/gdb.reverse/solib-reverse.exp
index a370e94..1389952 100644
--- a/gdb/testsuite/gdb.reverse/solib-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/solib-reverse.exp
@@ -38,19 +38,19 @@ if [get_compiler_info] {
# Compile the first without debug info so that
# stepping and reverse stepping doesn't end up inside them.
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib1src} ${library1} ""] != "" } {
- untested "Could not compile shared library1."
+ untested "could not compile shared library1."
return -1
}
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib2src} ${library2} "debug"] != "" } {
- untested "Could not compile shared library2."
+ untested "could not compile shared library2."
return -1
}
set exec_opts [list debug shlib=${library1} shlib=${library2}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.stabs/gdb11479.exp b/gdb/testsuite/gdb.stabs/gdb11479.exp
index b5c5772..ab67280 100644
--- a/gdb/testsuite/gdb.stabs/gdb11479.exp
+++ b/gdb/testsuite/gdb.stabs/gdb11479.exp
@@ -22,7 +22,7 @@ set testfile "gdb11479"
proc do_test {version} {
if ![runto_main] {
- fail "Can't run to main $version"
+ fail "can't run to main $version"
return -1
}
gdb_test "rb test" "" "Set breakpoints $version"
diff --git a/gdb/testsuite/gdb.stabs/weird.exp b/gdb/testsuite/gdb.stabs/weird.exp
index 2a8ef3e..699b26b 100644
--- a/gdb/testsuite/gdb.stabs/weird.exp
+++ b/gdb/testsuite/gdb.stabs/weird.exp
@@ -305,7 +305,7 @@ gdb_expect 60 {
pass "weirdx.o read without error"
}
-re ".*$gdb_prompt $" {
- fail "Errors reading weirdx.o"
+ fail "errors reading weirdx.o"
}
timeout {
perror "couldn't load $binfile into $GDB (timed out)."
diff --git a/gdb/testsuite/gdb.threads/fork-child-threads.exp b/gdb/testsuite/gdb.threads/fork-child-threads.exp
index fcceb02..8a7c596 100644
--- a/gdb/testsuite/gdb.threads/fork-child-threads.exp
+++ b/gdb/testsuite/gdb.threads/fork-child-threads.exp
@@ -27,7 +27,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/fork-plus-threads.exp b/gdb/testsuite/gdb.threads/fork-plus-threads.exp
index 0d621c3..81eeda3 100644
--- a/gdb/testsuite/gdb.threads/fork-plus-threads.exp
+++ b/gdb/testsuite/gdb.threads/fork-plus-threads.exp
@@ -46,7 +46,7 @@ proc do_test { detach_on_fork } {
set GDBFLAGS $saved_gdbflags
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/fork-thread-pending.exp b/gdb/testsuite/gdb.threads/fork-thread-pending.exp
index 96187ec..ff67294 100644
--- a/gdb/testsuite/gdb.threads/fork-thread-pending.exp
+++ b/gdb/testsuite/gdb.threads/fork-thread-pending.exp
@@ -28,7 +28,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -86,7 +86,7 @@ gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp b/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp
index 364c5d4..0c1f042 100644
--- a/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp
+++ b/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp
@@ -39,7 +39,7 @@ proc probe_displaced_stepping_support {} {
gdb_test_no_output "set displaced on"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -79,7 +79,7 @@ proc do_test { cond_bp_target detach_on_fork displaced } {
set GDBFLAGS $saved_gdbflags
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/hand-call-in-threads.exp b/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
index 67c2c8e..1dd73b9 100644
--- a/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
+++ b/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
@@ -26,7 +26,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
@@ -50,7 +50,7 @@ proc get_dummy_frame_number { } {
clean_restart ${binfile}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
index 556902c..65ed279 100644
--- a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
+++ b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
@@ -27,14 +27,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
clean_restart ${binfile}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/killed.exp b/gdb/testsuite/gdb.threads/killed.exp
index e62ed3f..dfa9325 100644
--- a/gdb/testsuite/gdb.threads/killed.exp
+++ b/gdb/testsuite/gdb.threads/killed.exp
@@ -75,12 +75,12 @@ gdb_expect {
exp_continue
}
eof {
- pass "GDB exits after multi-threaded program exits messily"
+ pass "gdb exits after multi-threaded program exits messily"
}
-re "Cannot find thread ${decimal}: generic error\[\r\n\]*$gdb_prompt $" {
kfail "gdb/568" "GDB exits after multi-threaded program exits messily"
}
timeout {
- fail "GDB exits after multi-threaded program exits messily (timeout)"
+ fail "gdb exits after multi-threaded program exits messily (timeout)"
}
}
diff --git a/gdb/testsuite/gdb.threads/linux-dp.exp b/gdb/testsuite/gdb.threads/linux-dp.exp
index 9f717c7..400fb16 100644
--- a/gdb/testsuite/gdb.threads/linux-dp.exp
+++ b/gdb/testsuite/gdb.threads/linux-dp.exp
@@ -98,7 +98,7 @@ for {set i 0} {$i < 5} {incr i} {
# It would be nice if we could catch the message that GDB prints
# when it first notices that the thread library doesn't support
# debugging, or if we could explicitly ask GDB somehow.
- unsupported "This GDB does not support threads on this system."
+ unsupported "this GDB does not support threads on this system."
return -1
}
-re "$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.threads/local-watch-wrong-thread.exp b/gdb/testsuite/gdb.threads/local-watch-wrong-thread.exp
index a60f98b..b97f71a 100644
--- a/gdb/testsuite/gdb.threads/local-watch-wrong-thread.exp
+++ b/gdb/testsuite/gdb.threads/local-watch-wrong-thread.exp
@@ -35,7 +35,7 @@ clean_restart ${binfile}
gdb_test_no_output "set can-use-hw-watchpoints 1" ""
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.threads/manythreads.exp b/gdb/testsuite/gdb.threads/manythreads.exp
index 0dd72b7..6a82682 100644
--- a/gdb/testsuite/gdb.threads/manythreads.exp
+++ b/gdb/testsuite/gdb.threads/manythreads.exp
@@ -175,10 +175,10 @@ gdb_test_multiple "quit" "GDB exits after stopping multithreaded program" {
exp_continue
}
eof {
- pass "GDB exits after stopping multithreaded program"
+ pass "gdb exits after stopping multithreaded program"
}
timeout {
- fail "GDB exits after stopping multithreaded program (timeout)"
+ fail "gdb exits after stopping multithreaded program (timeout)"
}
}
diff --git a/gdb/testsuite/gdb.threads/next-while-other-thread-longjmps.exp b/gdb/testsuite/gdb.threads/next-while-other-thread-longjmps.exp
index 56442b1..2913a63 100644
--- a/gdb/testsuite/gdb.threads/next-while-other-thread-longjmps.exp
+++ b/gdb/testsuite/gdb.threads/next-while-other-thread-longjmps.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing "failed to prepare" \
}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exit.exp b/gdb/testsuite/gdb.threads/non-ldr-exit.exp
index 7276b6c..39b9804 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exit.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exit.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile {debug pthreads}
}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.threads/pending-step.exp b/gdb/testsuite/gdb.threads/pending-step.exp
index d3c7d57..b8b6443 100644
--- a/gdb/testsuite/gdb.threads/pending-step.exp
+++ b/gdb/testsuite/gdb.threads/pending-step.exp
@@ -57,7 +57,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/print-threads.exp b/gdb/testsuite/gdb.threads/print-threads.exp
index 1cbec5f..3ead23c 100644
--- a/gdb/testsuite/gdb.threads/print-threads.exp
+++ b/gdb/testsuite/gdb.threads/print-threads.exp
@@ -50,16 +50,16 @@ proc test_all_threads { name kill } {
gdb_test_multiple "continue" "all threads ran once" {
-re "Breakpoint \[0-9\]+, thread_function \\(arg=.*\\) at .*print-threads.c:\[0-9\]+.*$gdb_prompt" {
set i [expr $i + 1]
- pass "Hit thread_function breakpoint, $i ($name)"
+ pass "hit thread_function breakpoint, $i ($name)"
send_gdb "continue\n"
exp_continue
}
-re "Breakpoint \[0-9\]+, .* kill \\(.*\\) .*$gdb_prompt" {
set j [expr $j + 1]
if { $kill == 1 } {
- pass "Hit kill breakpoint, $j ($name)"
+ pass "hit kill breakpoint, $j ($name)"
} else {
- fail "Hit kill breakpoint, $j ($name) (unexpected)"
+ fail "hit kill breakpoint, $j ($name) (unexpected)"
}
send_gdb "continue\n"
exp_continue
@@ -76,7 +76,7 @@ proc test_all_threads { name kill } {
if { $kill == 1 } {
kfail "gdb/1265" "Running threads ($name) (zombie thread)"
} else {
- fail "Running threads ($name) (unknown output)"
+ fail "running threads ($name) (unknown output)"
}
}
}
diff --git a/gdb/testsuite/gdb.threads/process-dies-while-detaching.exp b/gdb/testsuite/gdb.threads/process-dies-while-detaching.exp
index 52dc8dd..84e9cbc 100644
--- a/gdb/testsuite/gdb.threads/process-dies-while-detaching.exp
+++ b/gdb/testsuite/gdb.threads/process-dies-while-detaching.exp
@@ -193,7 +193,7 @@ proc test_detach {multi_process cmd} {
clean_restart ${binfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -218,7 +218,7 @@ proc test_detach_watch {multi_process cmd} {
clean_restart ${binfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -254,7 +254,7 @@ proc test_detach_killed_outside {multi_process cmd} {
clean_restart ${binfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.threads/process-dies-while-handling-bp.exp b/gdb/testsuite/gdb.threads/process-dies-while-handling-bp.exp
index 2db31af..efec517 100644
--- a/gdb/testsuite/gdb.threads/process-dies-while-handling-bp.exp
+++ b/gdb/testsuite/gdb.threads/process-dies-while-handling-bp.exp
@@ -46,7 +46,7 @@ proc do_test { non_stop cond_bp_target } {
set GDBFLAGS $saved_gdbflags
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/pthreads.exp b/gdb/testsuite/gdb.threads/pthreads.exp
index 1fb27cf..2d26505 100644
--- a/gdb/testsuite/gdb.threads/pthreads.exp
+++ b/gdb/testsuite/gdb.threads/pthreads.exp
@@ -189,13 +189,13 @@ proc check_control_c {} {
# Verify that all threads are running.
if [all_threads_running] then {
- pass "All threads running after startup"
+ pass "all threads running after startup"
}
# Send a continue followed by ^C to the process to stop it.
gdb_test_multiple "continue" "continue with all threads running" {
-re "Continuing." {
- pass "Continue with all threads running"
+ pass "continue with all threads running"
}
}
after 2000
@@ -217,7 +217,7 @@ proc check_control_c {} {
# Verify that all threads can be run again after a ^C stop.
if [all_threads_running] then {
- pass "All threads running after continuing from ^C stop"
+ pass "all threads running after continuing from ^C stop"
}
return 0
}
diff --git a/gdb/testsuite/gdb.threads/queue-signal.exp b/gdb/testsuite/gdb.threads/queue-signal.exp
index 187e049..3813b66 100644
--- a/gdb/testsuite/gdb.threads/queue-signal.exp
+++ b/gdb/testsuite/gdb.threads/queue-signal.exp
@@ -23,7 +23,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
clean_restart ${binfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/reconnect-signal.exp b/gdb/testsuite/gdb.threads/reconnect-signal.exp
index 1fe0f59..1d134e2 100644
--- a/gdb/testsuite/gdb.threads/reconnect-signal.exp
+++ b/gdb/testsuite/gdb.threads/reconnect-signal.exp
@@ -27,14 +27,14 @@ if { [gdb_compile_pthreads \
"${srcdir}/${subdir}/${srcfile}" \
"${binfile}" \
executable {debug}] != "" } {
- untested "Couldn't compile test program."
+ untested "couldn't compile test program."
return -1
}
clean_restart $executable
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/signal-command-handle-nopass.exp b/gdb/testsuite/gdb.threads/signal-command-handle-nopass.exp
index 97dc420..d3b1670 100644
--- a/gdb/testsuite/gdb.threads/signal-command-handle-nopass.exp
+++ b/gdb/testsuite/gdb.threads/signal-command-handle-nopass.exp
@@ -41,7 +41,7 @@ proc test { step_over } {
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/signal-command-multiple-signals-pending.exp b/gdb/testsuite/gdb.threads/signal-command-multiple-signals-pending.exp
index 43fe779..581849d 100644
--- a/gdb/testsuite/gdb.threads/signal-command-multiple-signals-pending.exp
+++ b/gdb/testsuite/gdb.threads/signal-command-multiple-signals-pending.exp
@@ -38,7 +38,7 @@ proc test { schedlock } {
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/signal-delivered-right-thread.exp b/gdb/testsuite/gdb.threads/signal-delivered-right-thread.exp
index b7ce8ef..b8e03cb 100644
--- a/gdb/testsuite/gdb.threads/signal-delivered-right-thread.exp
+++ b/gdb/testsuite/gdb.threads/signal-delivered-right-thread.exp
@@ -35,7 +35,7 @@ proc test { command } {
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/signal-sigtrap.exp b/gdb/testsuite/gdb.threads/signal-sigtrap.exp
index c2789eb..6a3af56 100644
--- a/gdb/testsuite/gdb.threads/signal-sigtrap.exp
+++ b/gdb/testsuite/gdb.threads/signal-sigtrap.exp
@@ -37,7 +37,7 @@ proc test { sigtrap_thread } {
clean_restart ${binfile}
if ![runto "thread_function"] then {
- fail "Can't run to thread_function"
+ fail "can't run to thread_function"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/sigthread.exp b/gdb/testsuite/gdb.threads/sigthread.exp
index 71ef75a..c746b39 100644
--- a/gdb/testsuite/gdb.threads/sigthread.exp
+++ b/gdb/testsuite/gdb.threads/sigthread.exp
@@ -24,7 +24,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/staticthreads.exp b/gdb/testsuite/gdb.threads/staticthreads.exp
index 16fcb68..f0a844c 100644
--- a/gdb/testsuite/gdb.threads/staticthreads.exp
+++ b/gdb/testsuite/gdb.threads/staticthreads.exp
@@ -42,7 +42,7 @@ gdb_test_no_output "set print sevenbit-strings"
runto_main
gdb_test "break sem_post"
-set test "Continue to main's call of sem_post"
+set test "continue to main's call of sem_post"
gdb_test_multiple "continue" "$test" {
-re "Breakpoint .*, .*sem_post .*$gdb_prompt " {
pass "$test"
@@ -65,7 +65,7 @@ if [istarget hppa*-*-*] {
rerun_to_main
gdb_test "handle $sig nostop noprint pass"
-set test "Handle $sig helps"
+set test "handle $sig helps"
gdb_test "continue" " .*sem_post .*" "handle $sig helps"
@@ -84,7 +84,7 @@ gdb_test_multiple "info threads" "$test" {
# Check that the program can be quit.
-set test "GDB exits with static thread program"
+set test "gdb exits with static thread program"
gdb_test_multiple "quit" "$test" {
-re "Quit anyway\\? \\(y or n\\) $" {
send_gdb "y\n"
diff --git a/gdb/testsuite/gdb.threads/stepi-random-signal.exp b/gdb/testsuite/gdb.threads/stepi-random-signal.exp
index 2b64d5f..5e558dd 100644
--- a/gdb/testsuite/gdb.threads/stepi-random-signal.exp
+++ b/gdb/testsuite/gdb.threads/stepi-random-signal.exp
@@ -20,7 +20,7 @@ if { [gdb_compile_pthreads \
"${srcdir}/${subdir}/${srcfile}" \
"${binfile}" \
executable {debug}] != "" } {
- untested "Couldn't compile test program."
+ untested "couldn't compile test program."
return -1
}
diff --git a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
index 1327c7e..efa68d1 100644
--- a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
+++ b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
@@ -27,14 +27,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
clean_restart ${binfile}
if { ![runto_main] } {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/thread_check.exp b/gdb/testsuite/gdb.threads/thread_check.exp
index 52c6fa4..e4ad3ea 100644
--- a/gdb/testsuite/gdb.threads/thread_check.exp
+++ b/gdb/testsuite/gdb.threads/thread_check.exp
@@ -42,7 +42,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 1
}
diff --git a/gdb/testsuite/gdb.threads/thread_events.exp b/gdb/testsuite/gdb.threads/thread_events.exp
index c80d441..900cd29 100644
--- a/gdb/testsuite/gdb.threads/thread_events.exp
+++ b/gdb/testsuite/gdb.threads/thread_events.exp
@@ -112,7 +112,7 @@ proc test_thread_messages {enabled} {
# The initial thread may log a 'New Thread' message, but we don't
# check for it.
if ![runto_main] then {
- fail "Can't run to main $enabled_string"
+ fail "can't run to main $enabled_string"
return 1
}
diff --git a/gdb/testsuite/gdb.threads/tid-reuse.exp b/gdb/testsuite/gdb.threads/tid-reuse.exp
index 4a2c103..e2885ec 100644
--- a/gdb/testsuite/gdb.threads/tid-reuse.exp
+++ b/gdb/testsuite/gdb.threads/tid-reuse.exp
@@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile { debug pthreads
clean_restart ${binfile}
if ![runto main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.threads/tls-nodebug.exp b/gdb/testsuite/gdb.threads/tls-nodebug.exp
index 3b20697..89ec6e6 100644
--- a/gdb/testsuite/gdb.threads/tls-nodebug.exp
+++ b/gdb/testsuite/gdb.threads/tls-nodebug.exp
@@ -28,7 +28,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/tls-shared.exp b/gdb/testsuite/gdb.threads/tls-shared.exp
index 804e28a..2bbc4a5 100644
--- a/gdb/testsuite/gdb.threads/tls-shared.exp
+++ b/gdb/testsuite/gdb.threads/tls-shared.exp
@@ -39,7 +39,7 @@ clean_restart ${binfile}
gdb_load_shlib ${binfile_lib}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/tls-so_extern.exp b/gdb/testsuite/gdb.threads/tls-so_extern.exp
index dde7bcd..2142d15 100644
--- a/gdb/testsuite/gdb.threads/tls-so_extern.exp
+++ b/gdb/testsuite/gdb.threads/tls-so_extern.exp
@@ -38,7 +38,7 @@ clean_restart ${binfile}
gdb_load_shlib ${binfile_lib}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/gdb.threads/tls.exp b/gdb/testsuite/gdb.threads/tls.exp
index 5c07844..f6e988c 100644
--- a/gdb/testsuite/gdb.threads/tls.exp
+++ b/gdb/testsuite/gdb.threads/tls.exp
@@ -157,7 +157,7 @@ gdb_test "print a_thread_local" \
"Cannot read .a_thread_local. without registers"
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -263,7 +263,7 @@ foreach i [array names spin_threads] {
}
if {$thrs_in_spin == 0} {
- fail "No thread backtrace reported spin (vsyscall kernel problem?)"
+ fail "no thread backtrace reported spin (vsyscall kernel problem?)"
}
gdb_test "continue" ".*Breakpoint 4.*before exit.*" "threads exited"
@@ -271,10 +271,10 @@ gdb_test "continue" ".*Breakpoint 4.*before exit.*" "threads exited"
send_gdb "info thread\n"
gdb_expect {
-re ".* 1 *Thread.*2 *Thread.*$gdb_prompt $" {
- fail "Too many threads left at end"
+ fail "too many threads left at end"
}
-re ".*\\\* 1 *Thread.*main.*$gdb_prompt $" {
- pass "Expect only base thread at end"
+ pass "expect only base thread at end"
}
-re ".*No stack.*$gdb_prompt $" {
fail "runaway at end"
diff --git a/gdb/testsuite/gdb.threads/wp-replication.exp b/gdb/testsuite/gdb.threads/wp-replication.exp
index 12ec87a..88a2e06 100644
--- a/gdb/testsuite/gdb.threads/wp-replication.exp
+++ b/gdb/testsuite/gdb.threads/wp-replication.exp
@@ -43,7 +43,7 @@ gdb_test_no_output "set can-use-hw-watchpoints 1" ""
# Run to `main' where we begin our tests.
if ![runto_main] then {
- fail "Failed to run to main"
+ fail "failed to run to main"
return 0
}
@@ -86,7 +86,7 @@ gdb_test_no_output "set breakpoint always-inserted off"
# (through board settings) that it did not support them in the first place.
# Just exit.
if { $hwatch_count == 0} {
- fail "No hardware watchpoints available"
+ fail "no hardware watchpoints available"
return 0
}
diff --git a/gdb/testsuite/gdb.trace/actions-changed.exp b/gdb/testsuite/gdb.trace/actions-changed.exp
index 296277a..3b8e6ba 100644
--- a/gdb/testsuite/gdb.trace/actions-changed.exp
+++ b/gdb/testsuite/gdb.trace/actions-changed.exp
@@ -160,12 +160,12 @@ proc test_actions_changed { } {
clean_restart $testfile
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
index c4d1605..f02890a 100644
--- a/gdb/testsuite/gdb.trace/actions.exp
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -39,7 +39,7 @@ gdb_file_cmd $binfile
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
@@ -243,7 +243,7 @@ gdb_load $binfile
gdb_breakpoint "main"
gdb_run_cmd
if {[gdb_test "" "Breakpoint .*"] != 0} {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/backtrace.exp b/gdb/testsuite/gdb.trace/backtrace.exp
index 881a798..44a7657 100644
--- a/gdb/testsuite/gdb.trace/backtrace.exp
+++ b/gdb/testsuite/gdb.trace/backtrace.exp
@@ -28,12 +28,12 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -58,7 +58,7 @@ set arg6 6
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/change-loc.exp b/gdb/testsuite/gdb.trace/change-loc.exp
index 9fef3f0..118060a 100644
--- a/gdb/testsuite/gdb.trace/change-loc.exp
+++ b/gdb/testsuite/gdb.trace/change-loc.exp
@@ -39,7 +39,7 @@ set additional_flags [list debug shlib=$lib_sl1 shlib_load [gdb_target_symbol_pr
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $additional_flags] != ""} {
- untested "Could not compile either $libsrc1 or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc1 or $srcdir/$subdir/$srcfile."
return -1
}
@@ -49,12 +49,12 @@ gdb_load_shlib $lib_sl1
gdb_load_shlib $lib_sl2
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
@@ -70,7 +70,7 @@ proc tracepoint_change_loc_1 { trace_type } {
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
gdb_test_no_output "delete break 1"
@@ -298,7 +298,7 @@ proc tracepoint_install_in_trace_disabled { trace_type } {
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/collection.exp b/gdb/testsuite/gdb.trace/collection.exp
index f225429..c2f2b5c 100644
--- a/gdb/testsuite/gdb.trace/collection.exp
+++ b/gdb/testsuite/gdb.trace/collection.exp
@@ -777,7 +777,7 @@ proc gdb_trace_collection_test {} {
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/deltrace.exp b/gdb/testsuite/gdb.trace/deltrace.exp
index 652b6c1..bffd575 100644
--- a/gdb/testsuite/gdb.trace/deltrace.exp
+++ b/gdb/testsuite/gdb.trace/deltrace.exp
@@ -38,7 +38,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
set testline1 [expr $baseline + 4]
diff --git a/gdb/testsuite/gdb.trace/disconnected-tracing.exp b/gdb/testsuite/gdb.trace/disconnected-tracing.exp
index 240284b..5c45021 100644
--- a/gdb/testsuite/gdb.trace/disconnected-tracing.exp
+++ b/gdb/testsuite/gdb.trace/disconnected-tracing.exp
@@ -54,7 +54,7 @@ proc disconnected_tracing { } {
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -117,7 +117,7 @@ proc disconnected_tfind { } {
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/entry-values.exp b/gdb/testsuite/gdb.trace/entry-values.exp
index e8ed517..ced0095 100644
--- a/gdb/testsuite/gdb.trace/entry-values.exp
+++ b/gdb/testsuite/gdb.trace/entry-values.exp
@@ -80,7 +80,7 @@ gdb_test_multiple $test $test {
}
if { [string equal $returned_from_foo ""] } {
- fail "Find the call or branch instruction offset in bar"
+ fail "find the call or branch instruction offset in bar"
# The following test makes no sense if the offset is unknown. We need
# to update the pattern above to match call or branch instruction for
# the target architecture.
@@ -175,7 +175,7 @@ if {[gdb_compile [list ${binfile}1.o ${binfile}2.o] \
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -210,7 +210,7 @@ clean_restart $binfile
load_lib "trace-support.exp"
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/ftrace-lock.exp b/gdb/testsuite/gdb.trace/ftrace-lock.exp
index 0b12c8d..b48d969 100644
--- a/gdb/testsuite/gdb.trace/ftrace-lock.exp
+++ b/gdb/testsuite/gdb.trace/ftrace-lock.exp
@@ -30,14 +30,14 @@ set options [list debug [gdb_target_symbol_prefix_flags] \
# Check that the target supports trace.
if { [gdb_compile_pthreads "$srcdir/$subdir/$srcfile" $binfile executable $options] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -53,19 +53,19 @@ set remote_libipa [gdb_load_shlib $libipa]
lappend options shlib=$libipa
if { [gdb_compile_pthreads "$srcdir/$subdir/$srcfile" $binfile executable $options] != "" } {
- untested "Couldn't compile test program with in-process agent library"
+ untested "couldn't compile test program with in-process agent library"
return -1
}
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/ftrace.exp b/gdb/testsuite/gdb.trace/ftrace.exp
index e90485c..8b720d4 100644
--- a/gdb/testsuite/gdb.trace/ftrace.exp
+++ b/gdb/testsuite/gdb.trace/ftrace.exp
@@ -28,7 +28,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -52,7 +52,7 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
@@ -177,7 +177,7 @@ proc test_fast_tracepoints {} {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/infotrace.exp b/gdb/testsuite/gdb.trace/infotrace.exp
index 7ba212a..1561ead 100644
--- a/gdb/testsuite/gdb.trace/infotrace.exp
+++ b/gdb/testsuite/gdb.trace/infotrace.exp
@@ -102,12 +102,12 @@ gdb_trace_setactions "collect on tracepoint 1" "1" \
"collect gdb_struct1_test" "^$"
gdb_run_cmd
if {[gdb_test "" "Breakpoint ${decimal}, main.*"] != 0} {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
index 567954a..3e2aff7 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
@@ -22,12 +22,12 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} {debug}] } {
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
index a49cd17..3236d7c 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
@@ -22,12 +22,12 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} {debug}] } {
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp b/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
index ce02389..3d57623 100644
--- a/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
@@ -110,12 +110,12 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp b/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
index a0e49af..43b34c9 100644
--- a/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
@@ -32,13 +32,13 @@ set lib_opts [gdb_target_symbol_prefix_flags]
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
@@ -66,7 +66,7 @@ proc test_reconnect { } {
gdb_load_shlib $lib_sl1
gdb_load_shlib $lib_sl2
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
# Create tracepoints on marker and main, and leave them in the
@@ -247,12 +247,12 @@ gdb_load_shlib $lib_sl1
gdb_load_shlib $lib_sl2
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-tsv-changed.exp b/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
index 1a4783d..cf9a448 100644
--- a/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
@@ -65,12 +65,12 @@ proc test_create_delete_modify_tsv { } {
clean_restart $testfile
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
gdb_exit
@@ -147,7 +147,7 @@ proc test_upload_tsv { } {
clean_restart $testfile
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
@@ -233,12 +233,12 @@ proc test_upload_tsv { } {
clean_restart $testfile
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/no-attach-trace.exp b/gdb/testsuite/gdb.trace/no-attach-trace.exp
index 7ee8a4f..06d86e6 100644
--- a/gdb/testsuite/gdb.trace/no-attach-trace.exp
+++ b/gdb/testsuite/gdb.trace/no-attach-trace.exp
@@ -31,7 +31,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
clean_restart $testfile
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -43,7 +43,7 @@ gdb_test "tstart" "Target returns error code.*\."
with_test_prefix "after tstart" {
if ![runto_main] {
- fail "Can't run to main, target may have died unexpectedly"
+ fail "can't run to main, target may have died unexpectedly"
return -1
}
}
diff --git a/gdb/testsuite/gdb.trace/packetlen.exp b/gdb/testsuite/gdb.trace/packetlen.exp
index 93bfc79..a790063 100644
--- a/gdb/testsuite/gdb.trace/packetlen.exp
+++ b/gdb/testsuite/gdb.trace/packetlen.exp
@@ -34,7 +34,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/passc-dyn.exp b/gdb/testsuite/gdb.trace/passc-dyn.exp
index c5e2e2b..d8d68ec 100644
--- a/gdb/testsuite/gdb.trace/passc-dyn.exp
+++ b/gdb/testsuite/gdb.trace/passc-dyn.exp
@@ -33,7 +33,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -49,7 +49,7 @@ if { ![gdb_target_supports_trace] } then {
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/passcount.exp b/gdb/testsuite/gdb.trace/passcount.exp
index 2ec858a..df7e39d 100644
--- a/gdb/testsuite/gdb.trace/passcount.exp
+++ b/gdb/testsuite/gdb.trace/passcount.exp
@@ -37,7 +37,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/pending.exp b/gdb/testsuite/gdb.trace/pending.exp
index f7905fb..28ffc28 100644
--- a/gdb/testsuite/gdb.trace/pending.exp
+++ b/gdb/testsuite/gdb.trace/pending.exp
@@ -31,13 +31,13 @@ set lib_opts [gdb_target_symbol_prefix_flags]
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
@@ -47,12 +47,12 @@ gdb_load_shlib $lib_sl1
gdb_load_shlib $lib_sl2
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
@@ -183,7 +183,7 @@ proc pending_tracepoint_resolved_during_trace { trace_type } \
# Start with a fresh gdb.
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -252,7 +252,7 @@ proc pending_tracepoint_installed_during_trace { trace_type } \
# Start with a fresh gdb.
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -326,7 +326,7 @@ proc pending_tracepoint_disconnect_during_trace { trace_type } \
# Start with a fresh gdb.
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -374,7 +374,7 @@ proc pending_tracepoint_disconnect_after_resolved { trace_type } \
# Start with a fresh gdb.
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -427,7 +427,7 @@ proc pending_tracepoint_with_action_resolved { trace_type } \
# Start with a fresh gdb.
clean_restart $executable
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -508,7 +508,7 @@ gdb_load_shlib $libipa
lappend exec_opts "shlib=$libipa"
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/pr16508.exp b/gdb/testsuite/gdb.trace/pr16508.exp
index 7e6cbf5..8e963c3 100644
--- a/gdb/testsuite/gdb.trace/pr16508.exp
+++ b/gdb/testsuite/gdb.trace/pr16508.exp
@@ -23,7 +23,7 @@ if [prepare_for_testing "failed to prepare for trace tests" \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/qtro.exp b/gdb/testsuite/gdb.trace/qtro.exp
index 7bc80b8..444b453 100644
--- a/gdb/testsuite/gdb.trace/qtro.exp
+++ b/gdb/testsuite/gdb.trace/qtro.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
clean_restart $testfile
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -40,7 +40,7 @@ if ![gdb_is_target_remote] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/range-stepping.exp b/gdb/testsuite/gdb.trace/range-stepping.exp
index ba8c3d2..81da27d 100644
--- a/gdb/testsuite/gdb.trace/range-stepping.exp
+++ b/gdb/testsuite/gdb.trace/range-stepping.exp
@@ -25,7 +25,7 @@ if [prepare_for_testing $testfile.exp $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -78,13 +78,13 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
range_stepping_with_tracepoint "ftrace"
}
diff --git a/gdb/testsuite/gdb.trace/read-memory.exp b/gdb/testsuite/gdb.trace/read-memory.exp
index 35402cb..b82967d 100644
--- a/gdb/testsuite/gdb.trace/read-memory.exp
+++ b/gdb/testsuite/gdb.trace/read-memory.exp
@@ -23,7 +23,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -40,7 +40,7 @@ proc set_tracepoint_and_collect { } {
# Start with a fresh gdb.
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
gdb_test "break end" "Breakpoint \[0-9\] at .*"
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index 7d89627..f487ec6 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -34,7 +34,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -64,7 +64,7 @@ set arg6 6
set gdb_recursion_test_baseline [gdb_find_recursion_test_baseline $srcfile]
if { $gdb_recursion_test_baseline == -1 } {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/save-trace.exp b/gdb/testsuite/gdb.trace/save-trace.exp
index a70ad54..dfbbdca 100644
--- a/gdb/testsuite/gdb.trace/save-trace.exp
+++ b/gdb/testsuite/gdb.trace/save-trace.exp
@@ -38,7 +38,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/signal.exp b/gdb/testsuite/gdb.trace/signal.exp
index 48e495e..f36133a 100644
--- a/gdb/testsuite/gdb.trace/signal.exp
+++ b/gdb/testsuite/gdb.trace/signal.exp
@@ -36,7 +36,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -63,7 +63,7 @@ if { [istarget "i\[34567\]86-*-linux*"] || [istarget "x86_64-*-linux*"] } {
# Start with a fresh gdb.
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/stap-trace.exp b/gdb/testsuite/gdb.trace/stap-trace.exp
index 1c002c1..4cb05d5 100644
--- a/gdb/testsuite/gdb.trace/stap-trace.exp
+++ b/gdb/testsuite/gdb.trace/stap-trace.exp
@@ -42,7 +42,7 @@ proc compile_stap_bin {exec_name {arg ""}} {
if { [gdb_compile "$srcdir/$subdir/$srcfile" \
[standard_output_file $exec_name] \
executable [concat $arg debug nowarnings]] != "" } {
- untested "Could not compile ${srcfile}"
+ untested "could not compile ${srcfile}"
return 0
}
diff --git a/gdb/testsuite/gdb.trace/status-stop.exp b/gdb/testsuite/gdb.trace/status-stop.exp
index 73bc6e7..d6ce4ce 100644
--- a/gdb/testsuite/gdb.trace/status-stop.exp
+++ b/gdb/testsuite/gdb.trace/status-stop.exp
@@ -26,7 +26,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -45,7 +45,7 @@ proc test_tstart_tstop_tstart { } {
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -72,7 +72,7 @@ proc test_tstart_tstart { } {
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -99,7 +99,7 @@ proc test_buffer_full_tstart { } {
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/strace.exp b/gdb/testsuite/gdb.trace/strace.exp
index 6394926..aa3853c 100644
--- a/gdb/testsuite/gdb.trace/strace.exp
+++ b/gdb/testsuite/gdb.trace/strace.exp
@@ -33,7 +33,7 @@ set additional_flags [list quiet debug shlib=$libipa shlib_load \
"additional_flags=-lust -lurcu-bp" ]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $additional_flags] != ""} {
- untested "UST library or headers are not installed"
+ untested "ust library or headers are not installed"
return -1
}
@@ -51,7 +51,7 @@ proc strace_remove_socket { action } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -136,7 +136,7 @@ proc strace_info_marker { } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -173,7 +173,7 @@ proc strace_probe_marker { } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -213,7 +213,7 @@ proc strace_trace_on_same_addr { type } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -317,7 +317,7 @@ proc strace_trace_on_diff_addr { } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -377,7 +377,7 @@ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] } {
clean_restart $executable
gdb_load_shlib $libipa
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
if { ![gdb_target_supports_trace] } then {
@@ -386,7 +386,7 @@ if { ![gdb_target_supports_trace] } then {
# file can be removed. Note that GDB simply kill inferior doesn't remove
# the socket file.
gdb_test "detach" "Detaching .*, process .*"
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tfile.exp b/gdb/testsuite/gdb.trace/tfile.exp
index 183b4c3..9f89d3d 100644
--- a/gdb/testsuite/gdb.trace/tfile.exp
+++ b/gdb/testsuite/gdb.trace/tfile.exp
@@ -51,7 +51,7 @@ remote_file target delete $tfile_basic
remote_file target delete $tfile_error
if { ![generate_tracefile $binfile] } {
- unsupported "Unable to generate trace file"
+ unsupported "unable to generate trace file"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tfind.exp b/gdb/testsuite/gdb.trace/tfind.exp
index d78547d..cfd7db3 100644
--- a/gdb/testsuite/gdb.trace/tfind.exp
+++ b/gdb/testsuite/gdb.trace/tfind.exp
@@ -63,7 +63,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -75,7 +75,7 @@ if { ![gdb_target_supports_trace] } then {
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/trace-break.exp b/gdb/testsuite/gdb.trace/trace-break.exp
index a90d02d..b7b2ea1 100644
--- a/gdb/testsuite/gdb.trace/trace-break.exp
+++ b/gdb/testsuite/gdb.trace/trace-break.exp
@@ -28,7 +28,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -48,7 +48,7 @@ proc break_trace_same_addr_1 { trace_type option } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -83,7 +83,7 @@ proc break_trace_same_addr_2 { trace_type1 trace_type2 option } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -122,7 +122,7 @@ proc break_trace_same_addr_3 { trace_type option } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -160,7 +160,7 @@ proc break_trace_same_addr_4 { trace_type option } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -204,7 +204,7 @@ proc break_trace_same_addr_5 { trace1 trace2 trace3 trace3_at_first_loc } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -278,7 +278,7 @@ proc break_trace_same_addr_6 { trace1 enable1 trace2 enable2 } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -363,13 +363,13 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
foreach break_always_inserted { "on" "off" } {
break_trace_same_addr_1 "ftrace" ${break_always_inserted}
diff --git a/gdb/testsuite/gdb.trace/trace-condition.exp b/gdb/testsuite/gdb.trace/trace-condition.exp
index e36dba4..0e93e51 100644
--- a/gdb/testsuite/gdb.trace/trace-condition.exp
+++ b/gdb/testsuite/gdb.trace/trace-condition.exp
@@ -28,7 +28,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -53,12 +53,12 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
@@ -68,7 +68,7 @@ proc test_tracepoints { trace_command condition num_frames { kfail_proc 0 } } {
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
diff --git a/gdb/testsuite/gdb.trace/trace-enable-disable.exp b/gdb/testsuite/gdb.trace/trace-enable-disable.exp
index 0c35c92..43891fa 100644
--- a/gdb/testsuite/gdb.trace/trace-enable-disable.exp
+++ b/gdb/testsuite/gdb.trace/trace-enable-disable.exp
@@ -23,14 +23,14 @@ set options [list debug [gdb_target_symbol_prefix_flags]]
# Check that the target supports trace.
if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile executable $options] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -46,7 +46,7 @@ gdb_load_shlib $libipa
lappend options shlib=$libipa
if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile executable $options] != "" } {
- untested "Couldn't compile test program with in-process agent library"
+ untested "couldn't compile test program with in-process agent library"
return -1
}
@@ -62,7 +62,7 @@ proc test_tracepoint_enable_disable { tracepoint_cmd } {
set expected 0
if ![runto_main] {
- fail "Can't run to main."
+ fail "can't run to main."
return -1
}
diff --git a/gdb/testsuite/gdb.trace/trace-mt.exp b/gdb/testsuite/gdb.trace/trace-mt.exp
index b580344..bab2a61 100644
--- a/gdb/testsuite/gdb.trace/trace-mt.exp
+++ b/gdb/testsuite/gdb.trace/trace-mt.exp
@@ -23,14 +23,14 @@ set additional_flags [gdb_target_symbol_prefix_flags]
if { [gdb_compile_pthreads "$srcdir/$subdir/$srcfile" $binfile \
executable [list debug $additional_flags] ] != "" } {
- untested "Couldn't compile test program"
+ untested "couldn't compile test program"
return -1
}
clean_restart ${testfile}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
@@ -50,7 +50,7 @@ proc step_over_tracepoint { trace_type } \
# Make sure inferior is running in all-stop mode.
gdb_test_no_output "set non-stop 0"
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -75,7 +75,7 @@ proc break_trace_same_addr { trace_type option } \
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
@@ -118,13 +118,13 @@ if { [gdb_compile_pthreads "$srcdir/$subdir/$srcfile" $binfile \
clean_restart ${executable}
if ![runto_main] {
- fail "Can't run to main for ftrace tests"
+ fail "can't run to main for ftrace tests"
return 0
}
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
foreach break_always_inserted { "on" "off" } {
break_trace_same_addr "ftrace" ${break_always_inserted}
diff --git a/gdb/testsuite/gdb.trace/tracecmd.exp b/gdb/testsuite/gdb.trace/tracecmd.exp
index 11ef691..645dcbc 100644
--- a/gdb/testsuite/gdb.trace/tracecmd.exp
+++ b/gdb/testsuite/gdb.trace/tracecmd.exp
@@ -37,7 +37,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
@@ -163,9 +163,9 @@ gdb_delete_tracepoints
# Acceptance vs rejection of a location are target-specific, so allow both.
gdb_test_multiple "ftrace gdb_recursion_test" "Set a fast tracepoint" {
-re "Fast tracepoint $decimal at $hex: file.*$srcfile, line $testline1.*$gdb_prompt $" {
- pass "Set a fast tracepoint"
+ pass "set a fast tracepoint"
}
-re ".*May not have a fast tracepoint at $hex.*$gdb_prompt $" {
- pass "Declined to set a fast tracepoint"
+ pass "declined to set a fast tracepoint"
}
}
diff --git a/gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp b/gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp
index 4c52c64..52735d3 100644
--- a/gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp
+++ b/gdb/testsuite/gdb.trace/tracefile-pseudo-reg.exp
@@ -27,7 +27,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tspeed.exp b/gdb/testsuite/gdb.trace/tspeed.exp
index e638839..885fe23 100644
--- a/gdb/testsuite/gdb.trace/tspeed.exp
+++ b/gdb/testsuite/gdb.trace/tspeed.exp
@@ -128,7 +128,7 @@ clean_restart $executable
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/tstatus.exp b/gdb/testsuite/gdb.trace/tstatus.exp
index de6efb6..c3957c2 100644
--- a/gdb/testsuite/gdb.trace/tstatus.exp
+++ b/gdb/testsuite/gdb.trace/tstatus.exp
@@ -25,7 +25,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
}
if ![runto_main] {
- fail "Can't run to main to check for trace support"
+ fail "can't run to main to check for trace support"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tsv.exp b/gdb/testsuite/gdb.trace/tsv.exp
index f146745..d9e2d6b 100644
--- a/gdb/testsuite/gdb.trace/tsv.exp
+++ b/gdb/testsuite/gdb.trace/tsv.exp
@@ -106,7 +106,7 @@ gdb_reinitialize_dir $srcdir/$subdir
# The rest of the testing needs actual tracing to work.
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -193,7 +193,7 @@ gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
clean_restart ${binfile}
if ![runto_main] then {
- fail "Can't run to main"
+ fail "can't run to main"
return
}
diff --git a/gdb/testsuite/gdb.trace/unavailable.exp b/gdb/testsuite/gdb.trace/unavailable.exp
index ed1b533..d7cf020 100644
--- a/gdb/testsuite/gdb.trace/unavailable.exp
+++ b/gdb/testsuite/gdb.trace/unavailable.exp
@@ -732,7 +732,7 @@ proc gdb_trace_collection_test {} {
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/while-dyn.exp b/gdb/testsuite/gdb.trace/while-dyn.exp
index 79785e2..b090f76 100644
--- a/gdb/testsuite/gdb.trace/while-dyn.exp
+++ b/gdb/testsuite/gdb.trace/while-dyn.exp
@@ -35,7 +35,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
index fe4588a..2705852 100644
--- a/gdb/testsuite/gdb.trace/while-stepping.exp
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -41,7 +41,7 @@ gdb_file_cmd $binfile
gdb_delete_tracepoints
set trcpt1 [gdb_gettpnum gdb_c_test]
if { $trcpt1 <= 0 } then {
- fail "Could not find gdb_c_test function"
+ fail "could not find gdb_c_test function"
return
}
@@ -108,7 +108,7 @@ gdb_load $binfile
gdb_breakpoint "main"
gdb_run_cmd
if {[gdb_test "" "Breakpoint .*"] != 0} {
- fail "Can't run to main"
+ fail "can't run to main"
return -1
}
diff --git a/gdb/testsuite/lib/gdb-guile.exp b/gdb/testsuite/lib/gdb-guile.exp
index 7789449..37f37eb 100644
--- a/gdb/testsuite/lib/gdb-guile.exp
+++ b/gdb/testsuite/lib/gdb-guile.exp
@@ -25,11 +25,11 @@ proc skip_guile_tests {} {
gdb_test_multiple "guile (display \"test\\n\")" "verify guile support" {
-re "Undefined command.*$gdb_prompt $" {
- unsupported "Guile not supported."
+ unsupported "guile not supported."
return 1
}
-re "not supported.*$gdb_prompt $" {
- unsupported "Guile support is disabled."
+ unsupported "guile support is disabled."
return 1
}
-re "$gdb_prompt $" {}
@@ -116,7 +116,7 @@ proc gdb_install_guile_module { } {
proc gdb_guile_runto_main { } {
if ![runto_main] {
- fail "Can't run to main"
+ fail "can't run to main"
return 0
}
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index e1e9880..07a55f2 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -523,7 +523,7 @@ proc runto { function args } {
}
-re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" {
if { $print_fail } {
- unsupported "Non-stop mode not supported"
+ unsupported "non-stop mode not supported"
}
return 0
}
@@ -1746,7 +1746,7 @@ proc skip_python_tests_prompt { prompt_regexp } {
gdb_test_multiple "python print ('test')" "verify python support" {
-re "not supported.*$prompt_regexp" {
- unsupported "Python support is disabled."
+ unsupported "python support is disabled."
return 1
}
-re "$prompt_regexp" {}
@@ -3150,7 +3150,7 @@ gdb_caching_proc target_is_gdbserver {
global gdb_prompt
set is_gdbserver -1
- set test "Probing for GDBserver"
+ set test "probing for GDBserver"
gdb_test_multiple "monitor help" $test {
-re "The following monitor commands are supported.*Quit GDBserver.*$gdb_prompt $" {
@@ -3602,7 +3602,7 @@ proc gdb_compile_pthreads {source dest type options} {
}
}
if {!$built_binfile} {
- unsupported "Couldn't compile [file tail $source]: ${why_msg}"
+ unsupported "couldn't compile [file tail $source]: ${why_msg}"
return -1
}
}
@@ -3731,7 +3731,7 @@ proc gdb_compile_shlib_pthreads {sources dest options} {
}
}
if {!$built_binfile} {
- unsupported "Couldn't compile $sources: ${why_msg}"
+ unsupported "couldn't compile $sources: ${why_msg}"
return -1
}
}
@@ -3771,7 +3771,7 @@ proc gdb_compile_objc {source dest type options} {
}
}
if {!$built_binfile} {
- unsupported "Couldn't compile [file tail $source]: ${why_msg}"
+ unsupported "couldn't compile [file tail $source]: ${why_msg}"
return -1
}
}
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index 7c2bb3e..f345281 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -269,12 +269,12 @@ proc default_mi_gdb_start { args } {
verbose "GDB initialized."
}
-re ".*unrecognized option.*for a complete list of options." {
- untested "Skip mi tests (not compiled with mi support)."
+ untested "skip mi tests (not compiled with mi support)."
remote_close host
return -1
}
-re ".*Interpreter `mi' unrecognized." {
- untested "Skip mi tests (not compiled with mi support)."
+ untested "skip mi tests (not compiled with mi support)."
remote_close host
return -1
}
@@ -462,7 +462,7 @@ proc mi_gdb_target_cmd { targetname serialport } {
continue
}
-re "Non-stop mode requested, but remote does not support non-stop.*$mi_gdb_prompt" {
- unsupported "Non-stop mode not supported"
+ unsupported "non-stop mode not supported"
return 1
}
-re "Timeout reading from remote system.*$mi_gdb_prompt$" {
@@ -989,7 +989,7 @@ proc mi_run_cmd_full {use_mi_command args} {
-re "${run_match}\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\",group-id=\"\[0-9\]+\"\r\n)*(${library_loaded_re})*(${thread_selected_re})?${mi_gdb_prompt}" {
}
-re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
- unsupported "Non-stop mode not supported"
+ unsupported "non-stop mode not supported"
return -1
}
timeout {
@@ -2032,13 +2032,13 @@ proc check_mi_and_console_threads {name} {
}
}
if {$fails > 0} {
- fail "MI and console have same threads ($name)"
+ fail "mi and console have same threads ($name)"
# Send a list of failures to the log
send_log "Console has thread ids: $console_thread_list\n"
send_log "MI has thread ids: $mi_thread_list\n"
} else {
- pass "MI and console have same threads ($name)"
+ pass "mi and console have same threads ($name)"
}
}
}
diff --git a/gdb/testsuite/lib/pascal.exp b/gdb/testsuite/lib/pascal.exp
index 5ef3065..02a63bc 100644
--- a/gdb/testsuite/lib/pascal.exp
+++ b/gdb/testsuite/lib/pascal.exp
@@ -158,12 +158,12 @@ proc gdb_compile_pascal {source destfile type options} {
} elseif { $pascal_compiler_is_gpc == 1 } {
set result [gpc_compile $source $destfile $type $options]
} else {
- unsupported "No pascal compiler found"
+ unsupported "no pascal compiler found"
return "No pascal compiler. Compilation failed."
}
if ![file exists $destfile] {
- unsupported "Pascal compilation failed: $result"
+ unsupported "pascal compilation failed: $result"
return "Pascal compilation failed."
}
}
diff --git a/gdb/testsuite/lib/perftest.exp b/gdb/testsuite/lib/perftest.exp
index 7659ee0..2f8da14 100644
--- a/gdb/testsuite/lib/perftest.exp
+++ b/gdb/testsuite/lib/perftest.exp
@@ -90,7 +90,7 @@ namespace eval PerfTest {
if { [string compare $GDB_PERFTEST_MODE "run"] != 0 } {
if { [eval compile {$compile}] } {
- untested "Could not compile source files."
+ untested "could not compile source files."
return
}
}
diff --git a/gdb/testsuite/lib/prelink-support.exp b/gdb/testsuite/lib/prelink-support.exp
index 0584669..1d28b9b 100644
--- a/gdb/testsuite/lib/prelink-support.exp
+++ b/gdb/testsuite/lib/prelink-support.exp
@@ -62,7 +62,7 @@ proc symlink_resolve {file} {
set loop [expr $loop + 1]
if {$loop > 30} {
- fail "Looping symlink resolution for $file"
+ fail "looping symlink resolution for $file"
return ""
}
}
diff --git a/gdb/testsuite/lib/prompt.exp b/gdb/testsuite/lib/prompt.exp
index 571a5e5..132e472 100644
--- a/gdb/testsuite/lib/prompt.exp
+++ b/gdb/testsuite/lib/prompt.exp
@@ -59,10 +59,10 @@ proc default_prompt_gdb_start { } {
fail "double prompted"
}
-re "\[\r\n\]$gdb_prompt_fail $" {
- fail "GDB initializing first prompt"
+ fail "gdb initializing first prompt"
}
-re "\[\r\n\]$gdb_prompt $" {
- pass "GDB initializing first prompt"
+ pass "gdb initializing first prompt"
}
-re "$gdb_prompt $" {
perror "GDB never initialized."
diff --git a/gdb/testsuite/lib/selftest-support.exp b/gdb/testsuite/lib/selftest-support.exp
index f171cc8..ea8d6f2 100644
--- a/gdb/testsuite/lib/selftest-support.exp
+++ b/gdb/testsuite/lib/selftest-support.exp
@@ -72,7 +72,7 @@ proc selftest_setup { executable function } {
}
if { $gdb_file_cmd_debug_info != "debug" } then {
- untested "No debug information, skipping testcase."
+ untested "no debug information, skipping testcase."
return -1
}
--
2.7.4