This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH] Fixup test names starting with uppercase
- From: Luis Machado <lgustavo at codesourcery dot com>
- To: <gdb-patches at sourceware dot org>
- Date: Fri, 11 Nov 2016 20:46:02 -0600
- Subject: [PATCH] Fixup test names starting with uppercase
- Authentication-results: sourceware.org; auth=none
This fixes the offender testcases that have test names starting with
uppercase.
I also tried to catch cases where we set the test names via variables.
We should probably adopt a policy and stick with it. If the way to go is
all lowercase, then the following patch should hopefully help clean some
of the inconsistencies up. Otherwise, we should go the other way and adjust
the test names to start with uppercase.
There is also the question about capitalization of architecture names,
technology names (UST, TE) and language names (Pascal/Python/Rust).
Overall a fairly mechanical and tedious change done with:
sed -e "s/\(xfail\|kfail\|kpass\|fail\|pass\|unsupported\|untested\|set test\|set testname\) \"[A-Z][A-Za-z0-9]\+ /\L&/
Thoughts?
gdb/testsuite/ChangeLog:
2016-11-11 Luis Machado <lgustavo@codesourcery.com>
Force testnames to start with lowercase throughout all the files below.
* gdb.ada/array_return.exp
* gdb.ada/catch_ex.exp
* gdb.ada/info_exc.exp
* gdb.ada/mi_catch_ex.exp
* gdb.ada/mi_dyn_arr.exp
* gdb.ada/mi_ex_cond.exp
* gdb.ada/mi_exc_info.exp
* gdb.ada/mi_interface.exp
* gdb.ada/mi_task_arg.exp
* gdb.ada/mi_task_info.exp
* gdb.ada/mi_var_array.exp
* gdb.arch/alpha-step.exp
* gdb.arch/altivec-abi.exp
* gdb.arch/arm-neon.exp
* gdb.arch/disp-step-insn-reloc.exp
* gdb.arch/e500-prologue.exp
* gdb.arch/ftrace-insn-reloc.exp
* gdb.arch/gdb1558.exp
* gdb.arch/i386-bp_permanent.exp
* gdb.arch/i386-gnu-cfi.exp
* gdb.arch/mips16-thunks.exp
* gdb.arch/pa-nullify.exp
* gdb.arch/powerpc-aix-prologue.exp
* gdb.arch/powerpc-power.exp
* gdb.arch/powerpc-prologue.exp
* gdb.arch/ppc-dfp.exp
* gdb.arch/ppc-fp.exp
* gdb.arch/s390-multiarch.exp
* gdb.arch/s390-tdbregs.exp
* gdb.arch/thumb-bx-pc.exp
* gdb.arch/thumb-prologue.exp
* gdb.base/async.exp
* gdb.base/auto-connect-native-target.exp
* gdb.base/batch-preserve-term-settings.exp
* gdb.base/bigcore.exp
* gdb.base/bp-permanent.exp
* gdb.base/break-always.exp
* gdb.base/break-probes.exp
* gdb.base/break.exp
* gdb.base/call-ar-st.exp
* gdb.base/call-rt-st.exp
* gdb.base/call-sc.exp
* gdb.base/call-signal-resume.exp
* gdb.base/call-strs.exp
* gdb.base/callexit.exp
* gdb.base/callfuncs.exp
* gdb.base/disasm-end-cu.exp
* gdb.base/display.exp
* gdb.base/dprintf-non-stop.exp
* gdb.base/dprintf-pending.exp
* gdb.base/dso2dso.exp
* gdb.base/ending-run.exp
* gdb.base/enum_cond.exp
* gdb.base/examine-backward.exp
* gdb.base/fileio.exp
* gdb.base/fixsection.exp
* gdb.base/fullpath-expand.exp
* gdb.base/global-var-nested-by-dso.exp
* gdb.base/gnu-debugdata.exp
* gdb.base/gnu-ifunc.exp
* gdb.base/hbreak-in-shr-unsupported.exp
* gdb.base/hbreak-unmapped.exp
* gdb.base/info-fun.exp
* gdb.base/info-shared.exp
* gdb.base/macscp.exp
* gdb.base/overlays.exp
* gdb.base/pending.exp
* gdb.base/printcmds.exp
* gdb.base/ptype.exp
* gdb.base/randomize.exp
* gdb.base/realname-expand.exp
* gdb.base/remote.exp
* gdb.base/savedregs.exp
* gdb.base/sepdebug.exp
* gdb.base/shlib-call.exp
* gdb.base/shreloc.exp
* gdb.base/sigbpt.exp
* gdb.base/siginfo-obj.exp
* gdb.base/siginfo-thread.exp
* gdb.base/signest.exp
* gdb.base/signull.exp
* gdb.base/solib-corrupted.exp
* gdb.base/solib-display.exp
* gdb.base/solib-overlap.exp
* gdb.base/solib-search.exp
* gdb.base/solib-symbol.exp
* gdb.base/stale-infcall.exp
* gdb.base/structs.exp
* gdb.base/symtab-search-order.exp
* gdb.base/unwindonsignal.exp
* gdb.base/watch_thread_num.exp
* gdb.base/watchpoint.exp
* gdb.btrace/dlopen.exp
* gdb.cell/arch.exp
* gdb.cell/break.exp
* gdb.cell/bt.exp
* gdb.cell/core.exp
* gdb.cell/data.exp
* gdb.cell/dwarfaddr.exp
* gdb.cell/ea-cache.exp
* gdb.cell/ea-standalone.exp
* gdb.cell/ea-test.exp
* gdb.cell/f-regs.exp
* gdb.cell/fork.exp
* gdb.cell/gcore.exp
* gdb.cell/mem-access.exp
* gdb.cell/ptype.exp
* gdb.cell/registers.exp
* gdb.cell/sizeof.exp
* gdb.cell/solib-symbol.exp
* gdb.cell/solib.exp
* gdb.cp/exception.exp
* gdb.cp/gdb2495.exp
* gdb.cp/local.exp
* gdb.cp/templates.exp
* gdb.cp/virtfunc.exp
* gdb.dwarf2/dw2-dir-file-name.exp
* gdb.dwarf2/dw2-single-line-discriminators.exp
* gdb.guile/guile.exp
* gdb.linespec/macro-relative.exp
* gdb.mi/mi-breakpoint-changed.exp
* gdb.mi/mi-dprintf-pending.exp
* gdb.mi/mi-fullname-deleted.exp
* gdb.mi/mi-logging.exp
* gdb.mi/mi-pending.exp
* gdb.mi/mi-solib.exp
* gdb.mi/new-ui-mi-sync.exp
* gdb.multi/multi-arch-exec.exp
* gdb.multi/multi-arch.exp
* gdb.opt/solib-intra-step.exp
* gdb.python/py-breakpoint.exp
* gdb.python/py-cmd.exp
* gdb.python/py-events.exp
* gdb.python/py-evthreads.exp
* gdb.python/py-finish-breakpoint.exp
* gdb.python/py-finish-breakpoint2.exp
* gdb.python/py-shared.exp
* gdb.python/py-symbol.exp
* gdb.python/python.exp
* gdb.reverse/insn-reverse.exp
* gdb.reverse/solib-precsave.exp
* gdb.reverse/solib-reverse.exp
* gdb.stabs/weird.exp
* gdb.threads/hand-call-in-threads.exp
* gdb.threads/interrupted-hand-call.exp
* gdb.threads/killed.exp
* gdb.threads/linux-dp.exp
* gdb.threads/manythreads.exp
* gdb.threads/print-threads.exp
* gdb.threads/pthreads.exp
* gdb.threads/staticthreads.exp
* gdb.threads/thread-unwindonsignal.exp
* gdb.threads/tls.exp
* gdb.threads/wp-replication.exp
* gdb.trace/actions-changed.exp
* gdb.trace/actions.exp
* gdb.trace/backtrace.exp
* gdb.trace/change-loc.exp
* gdb.trace/collection.exp
* gdb.trace/deltrace.exp
* gdb.trace/entry-values.exp
* gdb.trace/ftrace-lock.exp
* gdb.trace/ftrace.exp
* gdb.trace/infotrace.exp
* gdb.trace/mi-trace-frame-collected.exp
* gdb.trace/mi-trace-unavailable.exp
* gdb.trace/mi-traceframe-changed.exp
* gdb.trace/mi-tracepoint-changed.exp
* gdb.trace/mi-tsv-changed.exp
* gdb.trace/no-attach-trace.exp
* gdb.trace/packetlen.exp
* gdb.trace/passc-dyn.exp
* gdb.trace/passcount.exp
* gdb.trace/pending.exp
* gdb.trace/qtro.exp
* gdb.trace/range-stepping.exp
* gdb.trace/report.exp
* gdb.trace/save-trace.exp
* gdb.trace/stap-trace.exp
* gdb.trace/strace.exp
* gdb.trace/tfile.exp
* gdb.trace/tfind.exp
* gdb.trace/trace-break.exp
* gdb.trace/trace-condition.exp
* gdb.trace/trace-mt.exp
* gdb.trace/tracecmd.exp
* gdb.trace/tspeed.exp
* gdb.trace/tsv.exp
* gdb.trace/unavailable.exp
* gdb.trace/while-dyn.exp
* gdb.trace/while-stepping.exp
* lib/gdb-guile.exp
* lib/gdb.exp
* lib/mi-support.exp
* lib/pascal.exp
* lib/perftest.exp
* lib/prelink-support.exp
* lib/prompt.exp
* lib/selftest-support.exp
---
gdb/testsuite/gdb.ada/array_return.exp | 2 +-
gdb/testsuite/gdb.ada/catch_ex.exp | 6 +++---
gdb/testsuite/gdb.ada/info_exc.exp | 2 +-
gdb/testsuite/gdb.ada/mi_catch_ex.exp | 6 +++---
gdb/testsuite/gdb.ada/mi_dyn_arr.exp | 2 +-
gdb/testsuite/gdb.ada/mi_ex_cond.exp | 2 +-
gdb/testsuite/gdb.ada/mi_exc_info.exp | 2 +-
gdb/testsuite/gdb.ada/mi_interface.exp | 2 +-
gdb/testsuite/gdb.ada/mi_task_arg.exp | 2 +-
gdb/testsuite/gdb.ada/mi_task_info.exp | 2 +-
gdb/testsuite/gdb.ada/mi_var_array.exp | 2 +-
gdb/testsuite/gdb.arch/alpha-step.exp | 2 +-
gdb/testsuite/gdb.arch/altivec-abi.exp | 2 +-
gdb/testsuite/gdb.arch/arm-neon.exp | 2 +-
gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp | 2 +-
gdb/testsuite/gdb.arch/e500-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp | 4 ++--
gdb/testsuite/gdb.arch/gdb1558.exp | 2 +-
gdb/testsuite/gdb.arch/i386-bp_permanent.exp | 2 +-
gdb/testsuite/gdb.arch/i386-gnu-cfi.exp | 6 +++---
gdb/testsuite/gdb.arch/mips16-thunks.exp | 10 +++++-----
gdb/testsuite/gdb.arch/pa-nullify.exp | 2 +-
gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/powerpc-power.exp | 4 ++--
gdb/testsuite/gdb.arch/powerpc-prologue.exp | 2 +-
gdb/testsuite/gdb.arch/ppc-dfp.exp | 4 ++--
gdb/testsuite/gdb.arch/ppc-fp.exp | 2 +-
gdb/testsuite/gdb.arch/s390-multiarch.exp | 2 +-
gdb/testsuite/gdb.arch/s390-tdbregs.exp | 6 +++---
gdb/testsuite/gdb.arch/thumb-bx-pc.exp | 2 +-
gdb/testsuite/gdb.arch/thumb-prologue.exp | 4 ++--
gdb/testsuite/gdb.base/async.exp | 2 +-
gdb/testsuite/gdb.base/auto-connect-native-target.exp | 6 +++---
gdb/testsuite/gdb.base/batch-preserve-term-settings.exp | 2 +-
gdb/testsuite/gdb.base/bigcore.exp | 4 ++--
gdb/testsuite/gdb.base/bp-permanent.exp | 2 +-
gdb/testsuite/gdb.base/break-always.exp | 2 +-
gdb/testsuite/gdb.base/break-probes.exp | 2 +-
gdb/testsuite/gdb.base/break.exp | 8 ++++----
gdb/testsuite/gdb.base/call-ar-st.exp | 2 +-
gdb/testsuite/gdb.base/call-rt-st.exp | 2 +-
gdb/testsuite/gdb.base/call-sc.exp | 2 +-
gdb/testsuite/gdb.base/call-signal-resume.exp | 2 +-
gdb/testsuite/gdb.base/call-strs.exp | 2 +-
gdb/testsuite/gdb.base/callexit.exp | 2 +-
gdb/testsuite/gdb.base/callfuncs.exp | 2 +-
gdb/testsuite/gdb.base/disasm-end-cu.exp | 8 ++++----
gdb/testsuite/gdb.base/display.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-non-stop.exp | 2 +-
gdb/testsuite/gdb.base/dprintf-pending.exp | 2 +-
gdb/testsuite/gdb.base/dso2dso.exp | 4 ++--
gdb/testsuite/gdb.base/ending-run.exp | 2 +-
gdb/testsuite/gdb.base/enum_cond.exp | 2 +-
gdb/testsuite/gdb.base/examine-backward.exp | 2 +-
gdb/testsuite/gdb.base/fileio.exp | 2 +-
gdb/testsuite/gdb.base/fixsection.exp | 2 +-
gdb/testsuite/gdb.base/fullpath-expand.exp | 2 +-
gdb/testsuite/gdb.base/global-var-nested-by-dso.exp | 4 ++--
gdb/testsuite/gdb.base/gnu-debugdata.exp | 2 +-
gdb/testsuite/gdb.base/gnu-ifunc.exp | 4 ++--
gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp | 2 +-
gdb/testsuite/gdb.base/hbreak-unmapped.exp | 2 +-
gdb/testsuite/gdb.base/info-fun.exp | 4 ++--
gdb/testsuite/gdb.base/info-shared.exp | 4 ++--
gdb/testsuite/gdb.base/macscp.exp | 2 +-
gdb/testsuite/gdb.base/overlays.exp | 2 +-
gdb/testsuite/gdb.base/pending.exp | 2 +-
gdb/testsuite/gdb.base/printcmds.exp | 4 ++--
gdb/testsuite/gdb.base/ptype.exp | 2 +-
gdb/testsuite/gdb.base/randomize.exp | 6 +++---
gdb/testsuite/gdb.base/realname-expand.exp | 2 +-
gdb/testsuite/gdb.base/remote.exp | 2 +-
gdb/testsuite/gdb.base/savedregs.exp | 2 +-
gdb/testsuite/gdb.base/sepdebug.exp | 4 ++--
gdb/testsuite/gdb.base/shlib-call.exp | 2 +-
gdb/testsuite/gdb.base/shreloc.exp | 10 +++++-----
gdb/testsuite/gdb.base/sigbpt.exp | 4 ++--
gdb/testsuite/gdb.base/siginfo-obj.exp | 10 +++++-----
gdb/testsuite/gdb.base/siginfo-thread.exp | 8 ++++----
gdb/testsuite/gdb.base/signest.exp | 2 +-
gdb/testsuite/gdb.base/signull.exp | 2 +-
gdb/testsuite/gdb.base/solib-corrupted.exp | 2 +-
gdb/testsuite/gdb.base/solib-display.exp | 4 ++--
gdb/testsuite/gdb.base/solib-overlap.exp | 6 +++---
gdb/testsuite/gdb.base/solib-search.exp | 4 ++--
gdb/testsuite/gdb.base/solib-symbol.exp | 2 +-
gdb/testsuite/gdb.base/stale-infcall.exp | 2 +-
gdb/testsuite/gdb.base/structs.exp | 2 +-
gdb/testsuite/gdb.base/symtab-search-order.exp | 2 +-
gdb/testsuite/gdb.base/unwindonsignal.exp | 2 +-
gdb/testsuite/gdb.base/watch_thread_num.exp | 2 +-
gdb/testsuite/gdb.base/watchpoint.exp | 2 +-
gdb/testsuite/gdb.btrace/dlopen.exp | 2 +-
gdb/testsuite/gdb.cell/arch.exp | 12 ++++++------
gdb/testsuite/gdb.cell/break.exp | 8 ++++----
gdb/testsuite/gdb.cell/bt.exp | 10 +++++-----
gdb/testsuite/gdb.cell/core.exp | 6 +++---
gdb/testsuite/gdb.cell/data.exp | 6 +++---
gdb/testsuite/gdb.cell/dwarfaddr.exp | 2 +-
gdb/testsuite/gdb.cell/ea-cache.exp | 6 +++---
gdb/testsuite/gdb.cell/ea-standalone.exp | 2 +-
gdb/testsuite/gdb.cell/ea-test.exp | 2 +-
gdb/testsuite/gdb.cell/f-regs.exp | 6 +++---
gdb/testsuite/gdb.cell/fork.exp | 6 +++---
gdb/testsuite/gdb.cell/gcore.exp | 6 +++---
gdb/testsuite/gdb.cell/mem-access.exp | 6 +++---
gdb/testsuite/gdb.cell/ptype.exp | 6 +++---
gdb/testsuite/gdb.cell/registers.exp | 6 +++---
gdb/testsuite/gdb.cell/sizeof.exp | 6 +++---
gdb/testsuite/gdb.cell/solib-symbol.exp | 6 +++---
gdb/testsuite/gdb.cell/solib.exp | 6 +++---
gdb/testsuite/gdb.cp/exception.exp | 2 +-
gdb/testsuite/gdb.cp/gdb2495.exp | 2 +-
gdb/testsuite/gdb.cp/local.exp | 2 +-
gdb/testsuite/gdb.cp/templates.exp | 2 +-
gdb/testsuite/gdb.cp/virtfunc.exp | 2 +-
gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp | 2 +-
gdb.dwarf2/dw2-single-line-discriminators.exp | 2 +-
gdb/testsuite/gdb.guile/guile.exp | 2 +-
gdb/testsuite/gdb.linespec/macro-relative.exp | 2 +-
gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-dprintf-pending.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-fullname-deleted.exp | 4 ++--
gdb/testsuite/gdb.mi/mi-logging.exp | 8 ++++----
gdb/testsuite/gdb.mi/mi-pending.exp | 6 +++---
gdb/testsuite/gdb.mi/mi-solib.exp | 4 ++--
gdb/testsuite/gdb.mi/new-ui-mi-sync.exp | 2 +-
gdb/testsuite/gdb.multi/multi-arch-exec.exp | 2 +-
gdb/testsuite/gdb.multi/multi-arch.exp | 2 +-
gdb/testsuite/gdb.opt/solib-intra-step.exp | 2 +-
gdb/testsuite/gdb.python/py-breakpoint.exp | 16 ++++++++--------
gdb/testsuite/gdb.python/py-cmd.exp | 2 +-
gdb/testsuite/gdb.python/py-events.exp | 2 +-
gdb/testsuite/gdb.python/py-evthreads.exp | 2 +-
gdb/testsuite/gdb.python/py-finish-breakpoint.exp | 16 ++++++++--------
gdb/testsuite/gdb.python/py-finish-breakpoint2.exp | 2 +-
gdb/testsuite/gdb.python/py-shared.exp | 4 ++--
gdb/testsuite/gdb.python/py-symbol.exp | 2 +-
gdb/testsuite/gdb.python/python.exp | 2 +-
gdb/testsuite/gdb.reverse/insn-reverse.exp | 2 +-
gdb/testsuite/gdb.reverse/solib-precsave.exp | 6 +++---
gdb/testsuite/gdb.reverse/solib-reverse.exp | 6 +++---
gdb/testsuite/gdb.stabs/weird.exp | 2 +-
gdb/testsuite/gdb.threads/hand-call-in-threads.exp | 2 +-
gdb/testsuite/gdb.threads/interrupted-hand-call.exp | 2 +-
gdb/testsuite/gdb.threads/killed.exp | 4 ++--
gdb/testsuite/gdb.threads/linux-dp.exp | 2 +-
gdb/testsuite/gdb.threads/manythreads.exp | 4 ++--
gdb/testsuite/gdb.threads/print-threads.exp | 8 ++++----
gdb/testsuite/gdb.threads/pthreads.exp | 6 +++---
gdb/testsuite/gdb.threads/staticthreads.exp | 6 +++---
gdb/testsuite/gdb.threads/thread-unwindonsignal.exp | 2 +-
gdb/testsuite/gdb.threads/tls.exp | 6 +++---
gdb/testsuite/gdb.threads/wp-replication.exp | 4 ++--
gdb/testsuite/gdb.trace/actions-changed.exp | 2 +-
gdb/testsuite/gdb.trace/actions.exp | 2 +-
gdb/testsuite/gdb.trace/backtrace.exp | 4 ++--
gdb/testsuite/gdb.trace/change-loc.exp | 4 ++--
gdb/testsuite/gdb.trace/collection.exp | 2 +-
gdb/testsuite/gdb.trace/deltrace.exp | 2 +-
gdb/testsuite/gdb.trace/entry-values.exp | 2 +-
gdb/testsuite/gdb.trace/ftrace-lock.exp | 2 +-
gdb/testsuite/gdb.trace/ftrace.exp | 2 +-
gdb/testsuite/gdb.trace/infotrace.exp | 2 +-
gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp | 2 +-
gdb/testsuite/gdb.trace/mi-trace-unavailable.exp | 2 +-
gdb/testsuite/gdb.trace/mi-traceframe-changed.exp | 2 +-
gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp | 6 +++---
gdb/testsuite/gdb.trace/mi-tsv-changed.exp | 4 ++--
gdb/testsuite/gdb.trace/no-attach-trace.exp | 2 +-
gdb/testsuite/gdb.trace/packetlen.exp | 2 +-
gdb/testsuite/gdb.trace/passc-dyn.exp | 4 ++--
gdb/testsuite/gdb.trace/passcount.exp | 2 +-
gdb/testsuite/gdb.trace/pending.exp | 8 ++++----
gdb/testsuite/gdb.trace/qtro.exp | 2 +-
gdb/testsuite/gdb.trace/range-stepping.exp | 2 +-
gdb/testsuite/gdb.trace/report.exp | 4 ++--
gdb/testsuite/gdb.trace/save-trace.exp | 2 +-
gdb/testsuite/gdb.trace/stap-trace.exp | 2 +-
gdb/testsuite/gdb.trace/strace.exp | 4 ++--
gdb/testsuite/gdb.trace/tfile.exp | 2 +-
gdb/testsuite/gdb.trace/tfind.exp | 4 ++--
gdb/testsuite/gdb.trace/trace-break.exp | 2 +-
gdb/testsuite/gdb.trace/trace-condition.exp | 2 +-
gdb/testsuite/gdb.trace/trace-mt.exp | 2 +-
gdb/testsuite/gdb.trace/tracecmd.exp | 6 +++---
gdb/testsuite/gdb.trace/tspeed.exp | 2 +-
gdb/testsuite/gdb.trace/tsv.exp | 2 +-
gdb/testsuite/gdb.trace/unavailable.exp | 2 +-
gdb/testsuite/gdb.trace/while-dyn.exp | 2 +-
gdb/testsuite/gdb.trace/while-stepping.exp | 2 +-
gdb/testsuite/lib/gdb-guile.exp | 4 ++--
gdb/testsuite/lib/gdb.exp | 4 ++--
gdb/testsuite/lib/mi-support.exp | 8 ++++----
gdb/testsuite/lib/pascal.exp | 4 ++--
gdb/testsuite/lib/perftest.exp | 2 +-
gdb/testsuite/lib/prelink-support.exp | 2 +-
gdb/testsuite/lib/prompt.exp | 4 ++--
gdb/testsuite/lib/selftest-support.exp | 2 +-
199 files changed, 346 insertions(+), 346 deletions(-)
diff --git a/gdb/testsuite/gdb.ada/array_return.exp b/gdb/testsuite/gdb.ada/array_return.exp
index 6e6d35f..f4dae48 100644
--- a/gdb/testsuite/gdb.ada/array_return.exp
+++ b/gdb/testsuite/gdb.ada/array_return.exp
@@ -28,7 +28,7 @@ clean_restart ${testfile}
# Start the inferior
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/catch_ex.exp b/gdb/testsuite/gdb.ada/catch_ex.exp
index 00089a9..5ffcdf1 100644
--- a/gdb/testsuite/gdb.ada/catch_ex.exp
+++ b/gdb/testsuite/gdb.ada/catch_ex.exp
@@ -39,7 +39,7 @@ set catch_exception_info \
####################################
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -88,7 +88,7 @@ gdb_test "continue" \
# - continue, the program exits.
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -149,7 +149,7 @@ gdb_test "continue" \
# the program.
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/info_exc.exp b/gdb/testsuite/gdb.ada/info_exc.exp
index db95aee..e3cfdb5 100644
--- a/gdb/testsuite/gdb.ada/info_exc.exp
+++ b/gdb/testsuite/gdb.ada/info_exc.exp
@@ -24,7 +24,7 @@ if {[gdb_compile_ada "${srcfile}" "${binfile}" executable [list debug]] != "" }
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_catch_ex.exp b/gdb/testsuite/gdb.ada/mi_catch_ex.exp
index 288a065..6ec0609 100644
--- a/gdb/testsuite/gdb.ada/mi_catch_ex.exp
+++ b/gdb/testsuite/gdb.ada/mi_catch_ex.exp
@@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -70,7 +70,7 @@ mi_gdb_load ${binfile}
####################################
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
@@ -126,7 +126,7 @@ continue_to_exception \
# - continue, the program exits.
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_dyn_arr.exp b/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
index cf30437..9a7da6e 100644
--- a/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
+++ b/gdb/testsuite/gdb.ada/mi_dyn_arr.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_ex_cond.exp b/gdb/testsuite/gdb.ada/mi_ex_cond.exp
index 31e039e..a228244 100644
--- a/gdb/testsuite/gdb.ada/mi_ex_cond.exp
+++ b/gdb/testsuite/gdb.ada/mi_ex_cond.exp
@@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_exc_info.exp b/gdb/testsuite/gdb.ada/mi_exc_info.exp
index 8f7434f..6026a3f 100644
--- a/gdb/testsuite/gdb.ada/mi_exc_info.exp
+++ b/gdb/testsuite/gdb.ada/mi_exc_info.exp
@@ -30,7 +30,7 @@ if [mi_gdb_start] {
}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_interface.exp b/gdb/testsuite/gdb.ada/mi_interface.exp
index 6000ec8..764236a 100644
--- a/gdb/testsuite/gdb.ada/mi_interface.exp
+++ b/gdb/testsuite/gdb.ada/mi_interface.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_task_arg.exp b/gdb/testsuite/gdb.ada/mi_task_arg.exp
index ecc29f0..6897936 100644
--- a/gdb/testsuite/gdb.ada/mi_task_arg.exp
+++ b/gdb/testsuite/gdb.ada/mi_task_arg.exp
@@ -37,7 +37,7 @@ mi_gdb_load ${binfile}
mi_gdb_test "-gdb-set debug-file-directory \"\"" ".*"
if ![mi_runto "task_switch.break_me"] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_task_info.exp b/gdb/testsuite/gdb.ada/mi_task_info.exp
index 936d69a..dc82c57 100644
--- a/gdb/testsuite/gdb.ada/mi_task_info.exp
+++ b/gdb/testsuite/gdb.ada/mi_task_info.exp
@@ -38,7 +38,7 @@ mi_gdb_load ${binfile}
####################################
if ![mi_runto "task_switch.break_me"] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.ada/mi_var_array.exp b/gdb/testsuite/gdb.ada/mi_var_array.exp
index c648e7e..3c7073f 100644
--- a/gdb/testsuite/gdb.ada/mi_var_array.exp
+++ b/gdb/testsuite/gdb.ada/mi_var_array.exp
@@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
if ![mi_run_to_main] then {
- fail "Cannot run to main, testcase aborted"
+ fail "cannot run to main, testcase aborted"
return 0
}
diff --git a/gdb/testsuite/gdb.arch/alpha-step.exp b/gdb/testsuite/gdb.arch/alpha-step.exp
index 3e681f1..284405b 100644
--- a/gdb/testsuite/gdb.arch/alpha-step.exp
+++ b/gdb/testsuite/gdb.arch/alpha-step.exp
@@ -24,7 +24,7 @@ set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/altivec-abi.exp b/gdb/testsuite/gdb.arch/altivec-abi.exp
index 3070fab..fb1b0e3 100644
--- a/gdb/testsuite/gdb.arch/altivec-abi.exp
+++ b/gdb/testsuite/gdb.arch/altivec-abi.exp
@@ -50,7 +50,7 @@ proc altivec_abi_tests { extra_flags force_abi } {
set result [catch "exec $readelf_program -A $binfile" output]
if {$result == 0 && ![regexp Tag_GNU_Power_ABI_Vector $output]} {
- untested "ABI not marked"
+ untested "abi not marked"
return
}
}
diff --git a/gdb/testsuite/gdb.arch/arm-neon.exp b/gdb/testsuite/gdb.arch/arm-neon.exp
index e4612f9..bd0e922 100644
--- a/gdb/testsuite/gdb.arch/arm-neon.exp
+++ b/gdb/testsuite/gdb.arch/arm-neon.exp
@@ -27,7 +27,7 @@ if { [gdb_skip_float_test] } {
standard_testfile
if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} {debug quiet}] } {
- unsupported "ARM NEON is not supported"
+ unsupported "arm NEON is not supported"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp b/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
index a6ceb0b..4c17916 100644
--- a/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
+++ b/gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp
@@ -53,7 +53,7 @@ proc read_testcase { n } {
set n_testcases [get_integer_valueof "n_testcases" 0]
if { ${n_testcases} == 0 } {
- untested "No instruction relocation to test"
+ untested "no instruction relocation to test"
return 1
}
diff --git a/gdb/testsuite/gdb.arch/e500-prologue.exp b/gdb/testsuite/gdb.arch/e500-prologue.exp
index 3019b3e..68e6664 100644
--- a/gdb/testsuite/gdb.arch/e500-prologue.exp
+++ b/gdb/testsuite/gdb.arch/e500-prologue.exp
@@ -27,7 +27,7 @@ set testfile "e500-prologue"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp b/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
index 44d1957..f39e4ff 100644
--- a/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
+++ b/gdb/testsuite/gdb.arch/ftrace-insn-reloc.exp
@@ -59,7 +59,7 @@ if ![runto_main] {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
@@ -82,7 +82,7 @@ proc read_testcase { n } {
set n_testcases [gdb_readexpr "n_testcases"]
if { ${n_testcases} == 0 } {
- untested "No instruction relocation to test"
+ untested "no instruction relocation to test"
return 1
}
diff --git a/gdb/testsuite/gdb.arch/gdb1558.exp b/gdb/testsuite/gdb.arch/gdb1558.exp
index d96ad87..8cea6d3 100644
--- a/gdb/testsuite/gdb.arch/gdb1558.exp
+++ b/gdb/testsuite/gdb.arch/gdb1558.exp
@@ -50,7 +50,7 @@ gdb_test "b sub2" "Breakpoint 3.*" "set breakpoint at sub2"
gdb_run_cmd
-set test "Hits breakpoint at main after function called from main"
+set test "hits breakpoint at main after function called from main"
gdb_test_multiple "" $test {
-re "Breakpoint 1.*main .*$gdb_prompt $" {
pass $test
diff --git a/gdb/testsuite/gdb.arch/i386-bp_permanent.exp b/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
index ba2db2a..005d1fc 100644
--- a/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
+++ b/gdb/testsuite/gdb.arch/i386-bp_permanent.exp
@@ -59,7 +59,7 @@ set retcode [gdb_test_multiple "disassemble $function" "Disassemble function '$f
}]
if {$retcode != 0} {
- fail "Disassemble failed, skipping entire test."
+ fail "disassemble failed, skipping entire test."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp b/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
index b569139..9c05cab 100644
--- a/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
+++ b/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp
@@ -73,11 +73,11 @@ gdb_test "up 3" \
gdb_test_multiple "info frame" "Existence of the CFI inserted register" {
-re "Stack level 3, frame at (0x\[0-9a-f\]+):.*Saved registers:.* ecx at (0x\[0-9a-f\]+),.*" {
- pass "Existence of the CFI inserted register"
+ pass "existence of the CFI inserted register"
if { [string compare $expect_out(1,string) $expect_out(2,string)] } then {
- fail "Value of the CFI inserted register"
+ fail "value of the CFI inserted register"
} else {
- pass "Value of the CFI inserted register"
+ pass "value of the CFI inserted register"
}
}
}
diff --git a/gdb/testsuite/gdb.arch/mips16-thunks.exp b/gdb/testsuite/gdb.arch/mips16-thunks.exp
index 15ebad3..37190d0 100644
--- a/gdb/testsuite/gdb.arch/mips16-thunks.exp
+++ b/gdb/testsuite/gdb.arch/mips16-thunks.exp
@@ -62,7 +62,7 @@ gdb_compile ${srcfile} ${objfile} object ${options}
set binfile [standard_output_file ${testname}]
set options [list debug nowarnings]
if { [gdb_compile ${objfiles} ${binfile} executable ${options}] != "" } then {
- unsupported "No MIPS16 support in the toolchain."
+ unsupported "no MIPS16 support in the toolchain."
return
}
clean_restart ${testname}
@@ -76,21 +76,21 @@ gdb_test_multiple "" "check for MIPS16 support in the processor" {
verbose "MIPS16 support check successful."
}
-re "$gdb_prompt $" {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
default {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
}
}
-re "$gdb_prompt $" {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
default {
- unsupported "No MIPS16 support in the processor."
+ unsupported "no MIPS16 support in the processor."
return
}
}
diff --git a/gdb/testsuite/gdb.arch/pa-nullify.exp b/gdb/testsuite/gdb.arch/pa-nullify.exp
index 6689569..cbc66bf 100644
--- a/gdb/testsuite/gdb.arch/pa-nullify.exp
+++ b/gdb/testsuite/gdb.arch/pa-nullify.exp
@@ -36,7 +36,7 @@ set binfile ${objdir}/${subdir}/${testfile}
set gcorefile ${objdir}/${subdir}/${testfile}.gcore
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp b/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
index d82c4de..f028e94 100644
--- a/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp
@@ -27,7 +27,7 @@ set testfile "powerpc-aix-prologue"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- unsupported "Testcase compile failed."
+ unsupported "testcase compile failed."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/powerpc-power.exp b/gdb/testsuite/gdb.arch/powerpc-power.exp
index 8594ad5..f15e889 100644
--- a/gdb/testsuite/gdb.arch/powerpc-power.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-power.exp
@@ -25,7 +25,7 @@ if {![istarget "powerpc*-*-*"]} then {
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } {
- untested "PowerPC instructions disassembly"
+ untested "powerpc instructions disassembly"
return -1
}
@@ -49,7 +49,7 @@ proc instr_to_patt {offset instr} {
proc func_check {offset instr} {
global func
- set test "Found $offset: $instr"
+ set test "found $offset: $instr"
if [regexp -nocase -line [instr_to_patt $offset $instr] $func] {
pass $test
} else {
diff --git a/gdb/testsuite/gdb.arch/powerpc-prologue.exp b/gdb/testsuite/gdb.arch/powerpc-prologue.exp
index 0c74d7e..e6c899a 100644
--- a/gdb/testsuite/gdb.arch/powerpc-prologue.exp
+++ b/gdb/testsuite/gdb.arch/powerpc-prologue.exp
@@ -29,7 +29,7 @@ set binfile [standard_output_file ${testfile}]
# Don't use "debug", so that we don't have line information for the assembly
# fragments.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
- untested "PowerPC prologue tests"
+ untested "powerpc prologue tests"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ppc-dfp.exp b/gdb/testsuite/gdb.arch/ppc-dfp.exp
index 6f77d18..b7f1905 100644
--- a/gdb/testsuite/gdb.arch/ppc-dfp.exp
+++ b/gdb/testsuite/gdb.arch/ppc-dfp.exp
@@ -35,7 +35,7 @@ if ![test_compiler_info gcc*] {
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {quiet debug}] != "" } {
- unsupported "This machine doesn't support Decimal Floating Point."
+ unsupported "this machine doesn't support Decimal Floating Point."
return -1
}
@@ -54,7 +54,7 @@ gdb_run_cmd
# Unless the program bails out after checking AT_HWCAP.
gdb_expect {
-re "$inferior_exited_re with code 01.\[\r\n\]+$gdb_prompt $" {
- unsupported "This machine doesn't support Decimal Floating Point."
+ unsupported "this machine doesn't support Decimal Floating Point."
return -1
}
diff --git a/gdb/testsuite/gdb.arch/ppc-fp.exp b/gdb/testsuite/gdb.arch/ppc-fp.exp
index 523aaa3..f54ad76 100644
--- a/gdb/testsuite/gdb.arch/ppc-fp.exp
+++ b/gdb/testsuite/gdb.arch/ppc-fp.exp
@@ -56,7 +56,7 @@ gdb_expect { -re ".*$gdb_prompt $" {} }
# First, verify if FPSCR exists and is all zeroes.
gdb_test_multiple "print \$fpscr" "FPSCR exists" {
- -re " = 0\[\r\n\]+$gdb_prompt $" { pass "FPSCR is all zeroes" }
+ -re " = 0\[\r\n\]+$gdb_prompt $" { pass "fpscr is all zeroes" }
-re " = void\[\r\n\]+$gdb_prompt $" {
# There's no FPSCR. Skip this testcase.
diff --git a/gdb/testsuite/gdb.arch/s390-multiarch.exp b/gdb/testsuite/gdb.arch/s390-multiarch.exp
index 3bed279..c4b2fb7 100644
--- a/gdb/testsuite/gdb.arch/s390-multiarch.exp
+++ b/gdb/testsuite/gdb.arch/s390-multiarch.exp
@@ -63,7 +63,7 @@ proc compile_and_dump {variant ccopts binfile} {
proc test_linux_v2 {} {
global gdb_prompt
- set test "Linux v2"
+ set test "linux v2"
gdb_test_multiple "info reg system_call" "$test" {
-re "system_call\[ \t\]+0x\[0-9a-z\]+\t.*\r\n$gdb_prompt $" {
pass "$test"
diff --git a/gdb/testsuite/gdb.arch/s390-tdbregs.exp b/gdb/testsuite/gdb.arch/s390-tdbregs.exp
index a377668..90b33b3 100644
--- a/gdb/testsuite/gdb.arch/s390-tdbregs.exp
+++ b/gdb/testsuite/gdb.arch/s390-tdbregs.exp
@@ -36,14 +36,14 @@ if { ![runto_main] } then {
gdb_test_multiple "next" "check for TE support" {
-re "Program received signal SIGILL,.*\r\n$gdb_prompt $" {
- unsupported "No TE support."
+ unsupported "no TE support."
return
}
-re "\[0-9\]+.*\r\n$gdb_prompt $" {
- pass "TE support available"
+ pass "te support available"
}
-re "$gdb_prompt $" {
- unsupported "No TE support (unknown error)."
+ unsupported "no TE support (unknown error)."
return
}
}
diff --git a/gdb/testsuite/gdb.arch/thumb-bx-pc.exp b/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
index 843a01a..b00571b 100644
--- a/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
+++ b/gdb/testsuite/gdb.arch/thumb-bx-pc.exp
@@ -25,7 +25,7 @@ set srcfile ${testfile}.S
set opts {}
if [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} $opts] {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.arch/thumb-prologue.exp b/gdb/testsuite/gdb.arch/thumb-prologue.exp
index d37c4f6..1f3c0fc 100644
--- a/gdb/testsuite/gdb.arch/thumb-prologue.exp
+++ b/gdb/testsuite/gdb.arch/thumb-prologue.exp
@@ -25,7 +25,7 @@ standard_testfile
# Don't use "debug", so that we don't have line information for the assembly
# fragments.
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {"additional_flags=-mthumb"}] != "" } {
- untested "ARM prologue tests"
+ untested "arm prologue tests"
return -1
}
@@ -40,7 +40,7 @@ gdb_load ${binfile}
#
if ![runto_main] then {
- untested "ARM prologue tests"
+ untested "arm prologue tests"
return -1
}
diff --git a/gdb/testsuite/gdb.base/async.exp b/gdb/testsuite/gdb.base/async.exp
index f688423..3adb156 100644
--- a/gdb/testsuite/gdb.base/async.exp
+++ b/gdb/testsuite/gdb.base/async.exp
@@ -63,7 +63,7 @@ proc test_background {command before_prompt after_prompt {message ""}} {
fail "$message"
}
-re ".*Asynchronous execution not supported on this target\..*" {
- unsupported "Asynchronous execution not supported: $message"
+ unsupported "asynchronous execution not supported: $message"
}
timeout {
fail "$message (timeout)"
diff --git a/gdb/testsuite/gdb.base/auto-connect-native-target.exp b/gdb/testsuite/gdb.base/auto-connect-native-target.exp
index 191f85c..8d918d9 100644
--- a/gdb/testsuite/gdb.base/auto-connect-native-target.exp
+++ b/gdb/testsuite/gdb.base/auto-connect-native-target.exp
@@ -36,7 +36,7 @@ gdb_test_multiple $test $test {
}
if { !$have_native } {
- unsupported "No \"target native\" support."
+ unsupported "no \"target native\" support."
return
}
@@ -62,7 +62,7 @@ set topmost [get_topmost_target "check whether a target is already connected"]
# Testing against the extended-remote board, for example?
if { $topmost != "exec" } {
- unsupported "Already connected to target $topmost."
+ unsupported "already connected to target $topmost."
return
}
@@ -94,7 +94,7 @@ proc check_native_target {test} {
# Testing against a remote board, for example?
if { ![check_native_target "check whether board tests the native target"] } {
- unsupported "Not testing the native target."
+ unsupported "not testing the native target."
return
}
diff --git a/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
index a2de2c0..e7e3d7e 100644
--- a/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
+++ b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp
@@ -37,7 +37,7 @@ proc spawn_shell {} {
set res [remote_spawn host "/bin/sh"]
if { $res < 0 || $res == "" } {
- unsupported "Spawning shell failed."
+ unsupported "spawning shell failed."
return 0
}
diff --git a/gdb/testsuite/gdb.base/bigcore.exp b/gdb/testsuite/gdb.base/bigcore.exp
index ae00d0a..e1bb2ce 100644
--- a/gdb/testsuite/gdb.base/bigcore.exp
+++ b/gdb/testsuite/gdb.base/bigcore.exp
@@ -21,7 +21,7 @@
# mechanism that would let it efficiently access a remote corefile.
if ![isnative] then {
- untested "Remote system"
+ untested "remote system"
return
}
@@ -34,7 +34,7 @@ if { [istarget "*-*-*bsd*"]
|| [istarget "*-*-solaris*"]
|| [istarget "*-*-darwin*"]
|| [istarget "*-*-cygwin*"] } {
- untested "Kernel lacks sparse corefile support (PR gdb/1551)"
+ untested "kernel lacks sparse corefile support (PR gdb/1551)"
return
}
diff --git a/gdb/testsuite/gdb.base/bp-permanent.exp b/gdb/testsuite/gdb.base/bp-permanent.exp
index 57e36ed..64d0171 100644
--- a/gdb/testsuite/gdb.base/bp-permanent.exp
+++ b/gdb/testsuite/gdb.base/bp-permanent.exp
@@ -110,7 +110,7 @@ proc test {always_inserted sw_watchpoint} {
# Some targets (QEMU for one) will disallow writes to the
# .text section under certain circumstances. It is no use
# continuing with the test at this point. Just return.
- unsupported "Cannot modify memory"
+ unsupported "cannot modify memory"
return
}
-re " = .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.base/break-always.exp b/gdb/testsuite/gdb.base/break-always.exp
index 409fdcc..a1a4165 100644
--- a/gdb/testsuite/gdb.base/break-always.exp
+++ b/gdb/testsuite/gdb.base/break-always.exp
@@ -77,7 +77,7 @@ foreach test_value {0 1} {
# Some targets do not allow manually writing a breakpoint to a
# certain memory address, like QEMU. In that case, just bail out.
- unsupported "Cannot write to address $bp_address"
+ unsupported "cannot write to address $bp_address"
return -1
}
-re " = .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.base/break-probes.exp b/gdb/testsuite/gdb.base/break-probes.exp
index ddadc8b..bb8eee0 100644
--- a/gdb/testsuite/gdb.base/break-probes.exp
+++ b/gdb/testsuite/gdb.base/break-probes.exp
@@ -28,7 +28,7 @@ set probes_bp "dl_main"
if { [gdb_compile_shlib $srcfile_lib $binfile_lib \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib."
+ untested "could not compile $binfile_lib."
return -1
}
diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp
index 2b4587e..f111d58 100644
--- a/gdb/testsuite/gdb.base/break.exp
+++ b/gdb/testsuite/gdb.base/break.exp
@@ -35,13 +35,13 @@ gdb_expect {
send_gdb "y\n"
gdb_expect {
-re "$gdb_prompt $" {
- fail "Delete all breakpoints when none (unexpected prompt)"
+ fail "delete all breakpoints when none (unexpected prompt)"
}
- timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
+ timeout { fail "delete all breakpoints when none (timeout after unexpected prompt)" }
}
}
- -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
- timeout { fail "Delete all breakpoints when none (timeout)" }
+ -re ".*$gdb_prompt $" { pass "delete all breakpoints when none" }
+ timeout { fail "delete all breakpoints when none (timeout)" }
}
#
diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp
index c63935a..0e10453 100644
--- a/gdb/testsuite/gdb.base/call-ar-st.exp
+++ b/gdb/testsuite/gdb.base/call-ar-st.exp
@@ -22,7 +22,7 @@ standard_testfile
# Some targets can't call functions, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-rt-st.exp b/gdb/testsuite/gdb.base/call-rt-st.exp
index a92ba9e..7120b8b 100644
--- a/gdb/testsuite/gdb.base/call-rt-st.exp
+++ b/gdb/testsuite/gdb.base/call-rt-st.exp
@@ -40,7 +40,7 @@ if [get_compiler_info] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-sc.exp b/gdb/testsuite/gdb.base/call-sc.exp
index 89065e1..a5405df 100644
--- a/gdb/testsuite/gdb.base/call-sc.exp
+++ b/gdb/testsuite/gdb.base/call-sc.exp
@@ -23,7 +23,7 @@
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp
index a6b07cf..003532d 100644
--- a/gdb/testsuite/gdb.base/call-signal-resume.exp
+++ b/gdb/testsuite/gdb.base/call-signal-resume.exp
@@ -36,7 +36,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/call-strs.exp b/gdb/testsuite/gdb.base/call-strs.exp
index 7a310d4..ac1bf6d 100644
--- a/gdb/testsuite/gdb.base/call-strs.exp
+++ b/gdb/testsuite/gdb.base/call-strs.exp
@@ -28,7 +28,7 @@ standard_testfile
# Some targets can't call functions, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/callexit.exp b/gdb/testsuite/gdb.base/callexit.exp
index 219c9a4..112301c 100644
--- a/gdb/testsuite/gdb.base/callexit.exp
+++ b/gdb/testsuite/gdb.base/callexit.exp
@@ -24,7 +24,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp
index b108952..8fa016a 100644
--- a/gdb/testsuite/gdb.base/callfuncs.exp
+++ b/gdb/testsuite/gdb.base/callfuncs.exp
@@ -26,7 +26,7 @@ if [support_complex_tests] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/disasm-end-cu.exp b/gdb/testsuite/gdb.base/disasm-end-cu.exp
index 681cb76..81b153f 100644
--- a/gdb/testsuite/gdb.base/disasm-end-cu.exp
+++ b/gdb/testsuite/gdb.base/disasm-end-cu.exp
@@ -29,21 +29,21 @@ set main_addr [get_hexadecimal_valueof "&main" "0"]
set dummy_3_addr [get_hexadecimal_valueof "&dummy_3" "0"]
if {$main_addr == 0 || $dummy_3_addr == 0 || $dummy_3_addr <= $main_addr} {
- fail "Unable to extract required addresses, or addresses out of order"
+ fail "unable to extract required addresses, or addresses out of order"
return -1
}
gdb_test_multiple "disassemble /m ${main_addr},${dummy_3_addr}" "Disassemble address range with source" {
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\nEnd of assembler dump\." {
- fail "No output from the disassemble command"
+ fail "no output from the disassemble command"
}
-re "Line number 0 out of range;.* has $decimal lines\." {
- fail "The disassemble command failed"
+ fail "the disassemble command failed"
}
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\n.*main.*End of assembler dump\." {
pass "disassemble command returned some output"
}
-re ".*$gdb_prompt $" {
- fail "Unexpected output from disassemble command"
+ fail "unexpected output from disassemble command"
}
}
diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp
index 040110a..9576be54 100644
--- a/gdb/testsuite/gdb.base/display.exp
+++ b/gdb/testsuite/gdb.base/display.exp
@@ -53,7 +53,7 @@ if !$use_gdb_stub {
# Ok, on to real life
#
if ![runto_main] then {
- fail "Could not run to main - other tests will fail."
+ fail "could not run to main - other tests will fail."
continue
}
diff --git a/gdb/testsuite/gdb.base/dprintf-non-stop.exp b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
index 1787f6f..e46f9d6 100644
--- a/gdb/testsuite/gdb.base/dprintf-non-stop.exp
+++ b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
@@ -15,7 +15,7 @@
if [is_remote target] then {
# Testing with remote/non-stop is racy at the moment.
- unsupported "Testing dprintf with remote/non-stop is not supported."
+ unsupported "testing dprintf with remote/non-stop is not supported."
return 0
}
diff --git a/gdb/testsuite/gdb.base/dprintf-pending.exp b/gdb/testsuite/gdb.base/dprintf-pending.exp
index 5758c1b..10df3fb 100644
--- a/gdb/testsuite/gdb.base/dprintf-pending.exp
+++ b/gdb/testsuite/gdb.base/dprintf-pending.exp
@@ -32,7 +32,7 @@ if { [get_compiler_info] } {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/dso2dso.exp b/gdb/testsuite/gdb.base/dso2dso.exp
index 336d46a..f620d2c 100644
--- a/gdb/testsuite/gdb.base/dso2dso.exp
+++ b/gdb/testsuite/gdb.base/dso2dso.exp
@@ -41,13 +41,13 @@ set binfile_libdso1 [standard_output_file $libdso1.so]
if { [gdb_compile_shlib $srcfile_libdso2 $binfile_libdso2 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_libdso2."
+ untested "could not compile $binfile_libdso2."
return -1
}
if { [gdb_compile_shlib $srcfile_libdso1 $binfile_libdso1 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_libdso1."
+ untested "could not compile $binfile_libdso1."
return -1
}
diff --git a/gdb/testsuite/gdb.base/ending-run.exp b/gdb/testsuite/gdb.base/ending-run.exp
index 945e835..37bb39e 100644
--- a/gdb/testsuite/gdb.base/ending-run.exp
+++ b/gdb/testsuite/gdb.base/ending-run.exp
@@ -270,7 +270,7 @@ if {!$use_gdb_stub
set exec_output [remote_exec host "ls core"]
if [ regexp "core not found" $exec_output] {
- pass "No core dumped on quit"
+ pass "no core dumped on quit"
} else {
if [ regexp "No such file or directory" $exec_output] {
pass "ls: core (No core dumped on quit)"
diff --git a/gdb/testsuite/gdb.base/enum_cond.exp b/gdb/testsuite/gdb.base/enum_cond.exp
index bb3cf59..4be8a8a 100644
--- a/gdb/testsuite/gdb.base/enum_cond.exp
+++ b/gdb/testsuite/gdb.base/enum_cond.exp
@@ -21,7 +21,7 @@ standard_testfile .c
set opts [list debug additional_flags=-fshort-enums]
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $opts] != "" } {
- untested "Could not compile ${srcfile}"
+ untested "could not compile ${srcfile}"
return -1
}
diff --git a/gdb/testsuite/gdb.base/examine-backward.exp b/gdb/testsuite/gdb.base/examine-backward.exp
index e03cbfd..f39056e 100644
--- a/gdb/testsuite/gdb.base/examine-backward.exp
+++ b/gdb/testsuite/gdb.base/examine-backward.exp
@@ -36,7 +36,7 @@ proc get_first_mapped_address {} {
set addr $expect_out(1,string)
}
-re "$gdb_prompt $" {
- unsupported "Current target does not support 'info proc mappings'"
+ unsupported "current target does not support 'info proc mappings'"
}
}
return ${addr}
diff --git a/gdb/testsuite/gdb.base/fileio.exp b/gdb/testsuite/gdb.base/fileio.exp
index d83bbb4..5dd2f20 100644
--- a/gdb/testsuite/gdb.base/fileio.exp
+++ b/gdb/testsuite/gdb.base/fileio.exp
@@ -225,7 +225,7 @@ gdb_test continue \
"Continuing\\..*rename 2:.*EISDIR$stop_msg" \
"Renaming a file to existing directory returns EISDIR"
-set test "Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
+set test "renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
gdb_test_multiple continue "${test}" {
-re "Continuing\\..*rename 3:.*(ENOTEMPTY|EEXIST)$stop_msg$gdb_prompt $" {
pass "${test}"
diff --git a/gdb/testsuite/gdb.base/fixsection.exp b/gdb/testsuite/gdb.base/fixsection.exp
index 07b7bb5..0d5447b 100644
--- a/gdb/testsuite/gdb.base/fixsection.exp
+++ b/gdb/testsuite/gdb.base/fixsection.exp
@@ -34,7 +34,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile \
executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcfile."
+ untested "could not compile either $libsrc or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/fullpath-expand.exp b/gdb/testsuite/gdb.base/fullpath-expand.exp
index 4e572e5..1b1c5e7 100644
--- a/gdb/testsuite/gdb.base/fullpath-expand.exp
+++ b/gdb/testsuite/gdb.base/fullpath-expand.exp
@@ -16,7 +16,7 @@
standard_testfile .c fullpath-expand-func.c
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp b/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
index c8bdd2b..7285962 100644
--- a/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
+++ b/gdb/testsuite/gdb.base/global-var-nested-by-dso.exp
@@ -29,13 +29,13 @@ set binfile_lib2 [standard_output_file $lib2name.so]
if { [gdb_compile_shlib $srcfile_lib1 $binfile_lib1 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib1."
+ untested "could not compile $binfile_lib1."
return -1
}
if { [gdb_compile_shlib $srcfile_lib2 $binfile_lib2 \
[list debug additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib2."
+ untested "could not compile $binfile_lib2."
return -1
}
diff --git a/gdb/testsuite/gdb.base/gnu-debugdata.exp b/gdb/testsuite/gdb.base/gnu-debugdata.exp
index 6f6d3c6..96a9fe9 100644
--- a/gdb/testsuite/gdb.base/gnu-debugdata.exp
+++ b/gdb/testsuite/gdb.base/gnu-debugdata.exp
@@ -142,7 +142,7 @@ gdb_test "p debugdata_function" \
clean_restart "$testfile.test"
if {$gdb_file_cmd_debug_info == "lzma"} {
- unsupported "LZMA support not available in this gdb"
+ unsupported "lzma support not available in this gdb"
} else {
gdb_test "p debugdata_function" \
{ = {<text variable, no debug info>} 0x[0-9a-f]+ <debugdata_function>} \
diff --git a/gdb/testsuite/gdb.base/gnu-ifunc.exp b/gdb/testsuite/gdb.base/gnu-ifunc.exp
index 3b2775b..8565ca6 100644
--- a/gdb/testsuite/gdb.base/gnu-ifunc.exp
+++ b/gdb/testsuite/gdb.base/gnu-ifunc.exp
@@ -52,7 +52,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcdir}/${subdir}/$libsrc $lib_so $lib_opts] != ""
|| [gdb_compile ${srcdir}/${subdir}/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile dynamic executable $binfile."
+ untested "could not compile dynamic executable $binfile."
return -1
}
@@ -144,7 +144,7 @@ gdb_test "info sym $expect_out(1,string)" "gnu_ifunc in section .*" "info sym <g
if { [gdb_compile ${srcdir}/${subdir}/$libsrc $lib_o object {}] != ""
|| [gdb_compile "${srcdir}/${subdir}/$srcfile $lib_o" $staticbinfile executable {debug}] != "" } {
- untested "Could not compile static executable $staticbinfile."
+ untested "could not compile static executable $staticbinfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
index 03a6b74..e6ce76d 100644
--- a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
+++ b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib_src} ${lib_so} $lib_opts] != ""
|| [gdb_compile ${srcdir}/${subdir}/${main_src} ${binfile} executable $exec_opts] != ""} {
- untested "Could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
+ untested "could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/hbreak-unmapped.exp b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
index 43136ef..e50b58e 100644
--- a/gdb/testsuite/gdb.base/hbreak-unmapped.exp
+++ b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
@@ -30,7 +30,7 @@ if ![runto_main] {
# If we can read the memory at address 0, skip the test.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is readable"
+ untested "memory at address 0 is readable"
return
}
diff --git a/gdb/testsuite/gdb.base/info-fun.exp b/gdb/testsuite/gdb.base/info-fun.exp
index 3437216..cfd7428 100644
--- a/gdb/testsuite/gdb.base/info-fun.exp
+++ b/gdb/testsuite/gdb.base/info-fun.exp
@@ -40,13 +40,13 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $sep_lib_flags] != ""
|| [gdb_compile $srcdir/$subdir/${srcfile} ${binfile} \
executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
if {$libsepdebug == "SEP"} {
if {[gdb_gnu_strip_debug $binfile_lib] != 0} {
- unsupported "Could not split debug of $binfile_lib."
+ unsupported "could not split debug of $binfile_lib."
return
} else {
pass "split solib"
diff --git a/gdb/testsuite/gdb.base/info-shared.exp b/gdb/testsuite/gdb.base/info-shared.exp
index aa00f73..57aa1d0 100644
--- a/gdb/testsuite/gdb.base/info-shared.exp
+++ b/gdb/testsuite/gdb.base/info-shared.exp
@@ -31,13 +31,13 @@ set define2 -DSHLIB2_NAME=\"$binfile_lib2\"
if { [gdb_compile_shlib $srcfile_lib1 $binfile_lib1 \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib1."
+ untested "could not compile $binfile_lib1."
return -1
}
if { [gdb_compile_shlib $srcfile_lib2 $binfile_lib2 \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib2."
+ untested "could not compile $binfile_lib2."
return -1
}
diff --git a/gdb/testsuite/gdb.base/macscp.exp b/gdb/testsuite/gdb.base/macscp.exp
index 4e03553..22dcaac 100644
--- a/gdb/testsuite/gdb.base/macscp.exp
+++ b/gdb/testsuite/gdb.base/macscp.exp
@@ -209,7 +209,7 @@ gdb_test_multiple "info source" "Test macro information" {
}
}
if {$macro_support == 0} {
- unsupported "Skipping test because debug information does not include macro information."
+ unsupported "skipping test because debug information does not include macro information."
return 0
}
diff --git a/gdb/testsuite/gdb.base/overlays.exp b/gdb/testsuite/gdb.base/overlays.exp
index cf4213a..45b8670 100644
--- a/gdb/testsuite/gdb.base/overlays.exp
+++ b/gdb/testsuite/gdb.base/overlays.exp
@@ -171,7 +171,7 @@ gdb_expect {
-re ".*ovly2, " { fail ".ovly2 not unmapped by .ovly3" }
-re ".*data00," { fail ".data00 not unmapped by .data01" }
-re ".*data02," { fail ".data02 not unmapped by .data03" }
- -re ".*$gdb_prompt $" { pass "Automatic unmapping" }
+ -re ".*$gdb_prompt $" { pass "automatic unmapping" }
timeout { fail "(timeout) Automatic unmapping" }
}
diff --git a/gdb/testsuite/gdb.base/pending.exp b/gdb/testsuite/gdb.base/pending.exp
index 935fa14..ea913f1 100644
--- a/gdb/testsuite/gdb.base/pending.exp
+++ b/gdb/testsuite/gdb.base/pending.exp
@@ -37,7 +37,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/printcmds.exp b/gdb/testsuite/gdb.base/printcmds.exp
index 7937fe7..1471b31 100644
--- a/gdb/testsuite/gdb.base/printcmds.exp
+++ b/gdb/testsuite/gdb.base/printcmds.exp
@@ -683,7 +683,7 @@ proc test_print_string_constants {} {
gdb_test_no_output "set print elements 50"
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
@@ -706,7 +706,7 @@ proc test_print_string_constants {} {
proc test_print_array_constants {} {
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
diff --git a/gdb/testsuite/gdb.base/ptype.exp b/gdb/testsuite/gdb.base/ptype.exp
index dd61091..296b67a 100644
--- a/gdb/testsuite/gdb.base/ptype.exp
+++ b/gdb/testsuite/gdb.base/ptype.exp
@@ -591,7 +591,7 @@ gdb_test "ptype foo" "type = char" "ptype foo typedef after second list of charf
if [runto_main] then {
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/randomize.exp b/gdb/testsuite/gdb.base/randomize.exp
index fe78c91..529e6d6 100644
--- a/gdb/testsuite/gdb.base/randomize.exp
+++ b/gdb/testsuite/gdb.base/randomize.exp
@@ -43,11 +43,11 @@ proc address_get { testname } {
set test "set disable-randomization off"
gdb_test_multiple "${test}" "${test}" {
-re "Disabling randomization .* unsupported .*$gdb_prompt $" {
- untested "Disabling randomization is not supported on this Linux GDB"
+ untested "disabling randomization is not supported on this Linux GDB"
return -1
}
-re "No symbol .* in current context.*$gdb_prompt $" {
- untested "Disabling randomization is not supported on this GDB platform"
+ untested "disabling randomization is not supported on this GDB platform"
return -1
}
-re "$gdb_prompt $" {
@@ -62,7 +62,7 @@ set addr1 [address_get "randomized first address"]
set addr2 [address_get "randomized second address"]
set test "randomized addresses should not match"
if [string equal $addr1 $addr2] {
- untested "No randomization detected on this system"
+ untested "no randomization detected on this system"
return -1
} else {
pass $test
diff --git a/gdb/testsuite/gdb.base/realname-expand.exp b/gdb/testsuite/gdb.base/realname-expand.exp
index 918cf75..d21a403 100644
--- a/gdb/testsuite/gdb.base/realname-expand.exp
+++ b/gdb/testsuite/gdb.base/realname-expand.exp
@@ -16,7 +16,7 @@
standard_testfile .c realname-expand-real.c
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.base/remote.exp b/gdb/testsuite/gdb.base/remote.exp
index a3c34eb..b75540a 100644
--- a/gdb/testsuite/gdb.base/remote.exp
+++ b/gdb/testsuite/gdb.base/remote.exp
@@ -127,7 +127,7 @@ set sizeof_random_data [get_sizeof "random_data" 48*1024]
# Part THREE: Check the upload behavour
#
if ![runto_main] then {
- fail "Cannot run to main"
+ fail "cannot run to main"
}
# Carefully check memory around each of the most common packet edge
diff --git a/gdb/testsuite/gdb.base/savedregs.exp b/gdb/testsuite/gdb.base/savedregs.exp
index eea30d1..044e75f 100644
--- a/gdb/testsuite/gdb.base/savedregs.exp
+++ b/gdb/testsuite/gdb.base/savedregs.exp
@@ -64,7 +64,7 @@ proc process_saved_regs { current inner outer } {
foreach func $inner {
set saved_regs($func) "error"
- set test "Get $func info frame"
+ set test "get $func info frame"
# Both dummy and sigtramp frames have problems.
switch $func {
dummy {
diff --git a/gdb/testsuite/gdb.base/sepdebug.exp b/gdb/testsuite/gdb.base/sepdebug.exp
index 3ad3669..4ac235e 100644
--- a/gdb/testsuite/gdb.base/sepdebug.exp
+++ b/gdb/testsuite/gdb.base/sepdebug.exp
@@ -63,7 +63,7 @@ remote_exec build "mkdir [file dirname $new_name]"
remote_exec build "ln -s ${binfile}${EXEEXT} $new_name"
clean_restart ${testfile}${EXEEXT}
if { $gdb_file_cmd_debug_info != "debug" } then {
- fail "No debug information found."
+ fail "no debug information found."
}
# Restore subdir
@@ -71,7 +71,7 @@ set subdir ${old_subdir}
clean_restart ${testfile}${EXEEXT}
if { $gdb_file_cmd_debug_info != "debug" } then {
- fail "No debug information found."
+ fail "no debug information found."
}
#
diff --git a/gdb/testsuite/gdb.base/shlib-call.exp b/gdb/testsuite/gdb.base/shlib-call.exp
index 80491b7..fff1471 100644
--- a/gdb/testsuite/gdb.base/shlib-call.exp
+++ b/gdb/testsuite/gdb.base/shlib-call.exp
@@ -50,7 +50,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${lib1src} ${lib1} $lib_opts] != ""
|| [gdb_compile_shlib ${lib2src} ${lib2} $lib_opts] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $exec_opts] != ""} {
- untested "Could not compile $lib1, $lib2, or $srcfile."
+ untested "could not compile $lib1, $lib2, or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/shreloc.exp b/gdb/testsuite/gdb.base/shreloc.exp
index 1d3ed8b..b4a8bb0 100644
--- a/gdb/testsuite/gdb.base/shreloc.exp
+++ b/gdb/testsuite/gdb.base/shreloc.exp
@@ -59,13 +59,13 @@ if [test_compiler_info "xlc-*"] {
}
if { [gdb_compile_shlib $lib1src $lib1_sl $lib_opts] != ""} {
- untested "Could not build $lib1_sl."
+ untested "could not build $lib1_sl."
return -1
} elseif { [gdb_compile_shlib $lib2src $lib2_sl $lib_opts] != ""} {
- untested "Could not build $lib1_s2."
+ untested "could not build $lib1_s2."
return -1
} elseif { [gdb_compile $srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not build $binfile."
+ untested "could not build $binfile."
return -1
}
@@ -235,8 +235,8 @@ if {([istarget "*pc-cygwin"] || [istarget "*pc-mingw32"]) } {
# A better approach would be include absolute symbols via the assembler.
#
if {[check_same "_minor_os_version__" "${msymfile}"]} {
- pass "Absolute symbols not relocated"
+ pass "absolute symbols not relocated"
} else {
- fail "Absolute symbols not relocated"
+ fail "absolute symbols not relocated"
}
}
diff --git a/gdb/testsuite/gdb.base/sigbpt.exp b/gdb/testsuite/gdb.base/sigbpt.exp
index d291c97..012bd29 100644
--- a/gdb/testsuite/gdb.base/sigbpt.exp
+++ b/gdb/testsuite/gdb.base/sigbpt.exp
@@ -56,7 +56,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return
}
@@ -119,7 +119,7 @@ proc after_segv { } {
# Check that the address table and SIGSEGV correspond.
-set test "Verify that ${signame} occurs at the last STEPI insn"
+set test "verify that ${signame} occurs at the last STEPI insn"
if {[string compare $segv_addr [at_segv]] == 0} {
pass "$test"
} else {
diff --git a/gdb/testsuite/gdb.base/siginfo-obj.exp b/gdb/testsuite/gdb.base/siginfo-obj.exp
index 303074d..ca40216 100644
--- a/gdb/testsuite/gdb.base/siginfo-obj.exp
+++ b/gdb/testsuite/gdb.base/siginfo-obj.exp
@@ -52,7 +52,7 @@ set gcorefile [standard_output_file $testfile.gcore]
set gcore_created [gdb_gcore_cmd $gcorefile "save a core file"]
set ssi_addr ""
-set test "Extract si_addr"
+set test "extract si_addr"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_addr = ($hex).*$gdb_prompt $" {
set ssi_addr $expect_out(1,string)
@@ -60,7 +60,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_errno"
+set test "extract si_errno"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_errno = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_errno $expect_out(1,string)
@@ -68,7 +68,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_code"
+set test "extract si_code"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_code = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_code $expect_out(1,string)
@@ -76,7 +76,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_signo"
+set test "extract si_signo"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_signo = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_signo $expect_out(1,string)
@@ -105,7 +105,7 @@ if { ![runto_main] } then {
# Run to the signal.
gdb_test "continue" ".*Program received signal SIGSEGV.*" "continue to signal"
-set test "Set si_addr"
+set test "set si_addr"
gdb_test "p \$_siginfo._sifields._sigfault.si_addr = 0x666" " = \\(void \\*\\) 0x666"
gdb_test "p \$_siginfo.si_errno = 666" " = 666"
gdb_test "p \$_siginfo.si_code = 999" " = 999"
diff --git a/gdb/testsuite/gdb.base/siginfo-thread.exp b/gdb/testsuite/gdb.base/siginfo-thread.exp
index 9af99ea..415715a 100644
--- a/gdb/testsuite/gdb.base/siginfo-thread.exp
+++ b/gdb/testsuite/gdb.base/siginfo-thread.exp
@@ -48,7 +48,7 @@ set gcorefile [standard_output_file $testfile.gcore]
set gcore_created [gdb_gcore_cmd $gcorefile "save a core file"]
set ssi_addr ""
-set test "Extract si_addr"
+set test "extract si_addr"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_addr = ($hex).*$gdb_prompt $" {
set ssi_addr $expect_out(1,string)
@@ -56,7 +56,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_errno"
+set test "extract si_errno"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_errno = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_errno $expect_out(1,string)
@@ -64,7 +64,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_code"
+set test "extract si_code"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_code = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_code $expect_out(1,string)
@@ -72,7 +72,7 @@ gdb_test_multiple "p \$_siginfo" "$test" {
}
}
-set test "Extract si_signo"
+set test "extract si_signo"
gdb_test_multiple "p \$_siginfo" "$test" {
-re "si_signo = (\[0-9\]\+).*$gdb_prompt $" {
set ssi_signo $expect_out(1,string)
diff --git a/gdb/testsuite/gdb.base/signest.exp b/gdb/testsuite/gdb.base/signest.exp
index 4709b5d..d53b1b0 100644
--- a/gdb/testsuite/gdb.base/signest.exp
+++ b/gdb/testsuite/gdb.base/signest.exp
@@ -39,7 +39,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return -1
}
diff --git a/gdb/testsuite/gdb.base/signull.exp b/gdb/testsuite/gdb.base/signull.exp
index a10c83e..5a14bff 100644
--- a/gdb/testsuite/gdb.base/signull.exp
+++ b/gdb/testsuite/gdb.base/signull.exp
@@ -57,7 +57,7 @@ if ![runto_main] then {
# case.
if { [is_address_zero_readable] } {
- untested "Memory at address 0 is possibly executable"
+ untested "memory at address 0 is possibly executable"
return
}
diff --git a/gdb/testsuite/gdb.base/solib-corrupted.exp b/gdb/testsuite/gdb.base/solib-corrupted.exp
index f1c1e5c..3581d19 100644
--- a/gdb/testsuite/gdb.base/solib-corrupted.exp
+++ b/gdb/testsuite/gdb.base/solib-corrupted.exp
@@ -59,7 +59,7 @@ gdb_test_multiple $test $test {
}
if { [llength $probes] == 0 } {
xfail $test
- untested "GDB is using probes"
+ untested "gdb is using probes"
return
}
diff --git a/gdb/testsuite/gdb.base/solib-display.exp b/gdb/testsuite/gdb.base/solib-display.exp
index a82ec2e..6e915b9 100644
--- a/gdb/testsuite/gdb.base/solib-display.exp
+++ b/gdb/testsuite/gdb.base/solib-display.exp
@@ -74,13 +74,13 @@ foreach libsepdebug {NO IN SEP} { with_test_prefix "$libsepdebug" {
}
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $sep_lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
if {$libsepdebug == "SEP"} {
if {[gdb_gnu_strip_debug $binfile_lib] != 0} {
- unsupported "Could not split debug of $binfile_lib."
+ unsupported "could not split debug of $binfile_lib."
return
} else {
pass "split solib"
diff --git a/gdb/testsuite/gdb.base/solib-overlap.exp b/gdb/testsuite/gdb.base/solib-overlap.exp
index 40fdd09..5b90894 100644
--- a/gdb/testsuite/gdb.base/solib-overlap.exp
+++ b/gdb/testsuite/gdb.base/solib-overlap.exp
@@ -70,14 +70,14 @@ foreach prelink_lib1 {0x40000000 0x50000000} { with_test_prefix "$prelink_lib1"
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib1} $lib_flags] != ""
|| [gdb_compile_shlib ${srcfile_lib} ${binfile_lib2} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile ${binfile_lib1_test_msg}, ${binfile_lib2_test_msg} or ${binfile_test_msg}."
+ untested "could not compile ${binfile_lib1_test_msg}, ${binfile_lib2_test_msg} or ${binfile_test_msg}."
return -1
}
if {[catch "system \"prelink -N -r ${prelink_lib1} ${binfile_lib1}\""] != 0
|| [catch "system \"prelink -N -r ${prelink_lib2} ${binfile_lib2}\""] != 0} {
# Maybe we don't have prelink.
- untested "Could not prelink ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
+ untested "could not prelink ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
return -1
}
@@ -92,7 +92,7 @@ foreach prelink_lib1 {0x40000000 0x50000000} { with_test_prefix "$prelink_lib1"
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib1} $lib_flags] != ""
|| [gdb_compile_shlib ${srcfile_lib} ${binfile_lib2} $lib_flags] != ""} {
- untested "Could not recompile ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
+ untested "could not recompile ${binfile_lib1_test_msg} or ${binfile_lib2_test_msg}."
kill_wait_spawned_process $test_spawn_id
return -1
}
diff --git a/gdb/testsuite/gdb.base/solib-search.exp b/gdb/testsuite/gdb.base/solib-search.exp
index 1a3cb33..c486e51 100644
--- a/gdb/testsuite/gdb.base/solib-search.exp
+++ b/gdb/testsuite/gdb.base/solib-search.exp
@@ -69,7 +69,7 @@ if { [gdb_compile_shlib ${srcfile1_lib} ${wrong_binfile1_lib} $wrong_lib_flags]
|| [gdb_compile_shlib ${srcfile2_lib} ${wrong_binfile2_lib} $wrong_lib_flags] != ""
|| [gdb_compile_shlib ${srcfile1_lib} ${right_binfile1_lib} $right_lib_flags] != ""
|| [gdb_compile_shlib ${srcfile2_lib} ${right_binfile2_lib} $right_lib_flags] != "" } {
- untested "Could not compile libs."
+ untested "could not compile libs."
return -1
}
@@ -78,7 +78,7 @@ remote_exec build "ln -sf ${right_lib_subdir}/${libname1}.so ${binfile1_lib}"
remote_exec build "ln -sf ${right_lib_subdir}/${libname2}.so ${binfile2_lib}"
if { [gdb_compile $srcdir/$subdir/${srcfile} ${binfile} \
executable $bin_flags] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/solib-symbol.exp b/gdb/testsuite/gdb.base/solib-symbol.exp
index 1ff4b3d..d50b4ef 100644
--- a/gdb/testsuite/gdb.base/solib-symbol.exp
+++ b/gdb/testsuite/gdb.base/solib-symbol.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/stale-infcall.exp b/gdb/testsuite/gdb.base/stale-infcall.exp
index b887334..67b42e5 100644
--- a/gdb/testsuite/gdb.base/stale-infcall.exp
+++ b/gdb/testsuite/gdb.base/stale-infcall.exp
@@ -35,7 +35,7 @@ gdb_test_multiple "next" $test {
}
-re "( test-fail .*|\r\nCannot insert breakpoint 0\\.\r\n.*)\r\n$gdb_prompt $" {
xfail $test
- untested "System lacks support for tracking longjmps"
+ untested "system lacks support for tracking longjmps"
return -1
}
}
diff --git a/gdb/testsuite/gdb.base/structs.exp b/gdb/testsuite/gdb.base/structs.exp
index 4fcef52..912eb82 100644
--- a/gdb/testsuite/gdb.base/structs.exp
+++ b/gdb/testsuite/gdb.base/structs.exp
@@ -20,7 +20,7 @@
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/symtab-search-order.exp b/gdb/testsuite/gdb.base/symtab-search-order.exp
index f8f9036..9630327 100644
--- a/gdb/testsuite/gdb.base/symtab-search-order.exp
+++ b/gdb/testsuite/gdb.base/symtab-search-order.exp
@@ -33,7 +33,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $lib1src $lib1 $lib_opts] != ""
|| [gdb_compile [list $srcfile $srcfile2] $binfile executable \
$exec_opts] != ""} {
- untested "Could not compile $lib1, or $srcfile."
+ untested "could not compile $lib1, or $srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.base/unwindonsignal.exp b/gdb/testsuite/gdb.base/unwindonsignal.exp
index cf63c6d..f87c004 100644
--- a/gdb/testsuite/gdb.base/unwindonsignal.exp
+++ b/gdb/testsuite/gdb.base/unwindonsignal.exp
@@ -22,7 +22,7 @@ if [target_info exists gdb,nosignals] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.base/watch_thread_num.exp b/gdb/testsuite/gdb.base/watch_thread_num.exp
index eff9fbd..dce498e 100644
--- a/gdb/testsuite/gdb.base/watch_thread_num.exp
+++ b/gdb/testsuite/gdb.base/watch_thread_num.exp
@@ -60,7 +60,7 @@ gdb_test "continue" ".*Breakpoint .*loop.*" "Stopped in loop"
gdb_test_multiple "thread" "Thread command" {
-re ".*Current thread is (\[0-9\]*).*$gdb_prompt $" {
- pass "Thread command"
+ pass "thread command"
}
}
diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp
index e4eab3d..6e262e9 100644
--- a/gdb/testsuite/gdb.base/watchpoint.exp
+++ b/gdb/testsuite/gdb.base/watchpoint.exp
@@ -347,7 +347,7 @@ proc test_watchpoint_triggered_in_syscall {} {
# Run until we get to the first marker function.
set x 0
set y 0
- set testname "Watch buffer passed to read syscall"
+ set testname "watch buffer passed to read syscall"
if [runto marker2] then {
gdb_test "watch buf\[0\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[0\\\]"
gdb_test "watch buf\[1\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[1\\\]"
diff --git a/gdb/testsuite/gdb.btrace/dlopen.exp b/gdb/testsuite/gdb.btrace/dlopen.exp
index 2afb42b..05354f5 100644
--- a/gdb/testsuite/gdb.btrace/dlopen.exp
+++ b/gdb/testsuite/gdb.btrace/dlopen.exp
@@ -26,7 +26,7 @@ set binfile_lib [standard_output_file $basename_lib.so]
if { [gdb_compile_shlib $srcfile_lib $binfile_lib \
[list additional_flags=-fPIC]] != "" } {
- untested "Could not compile $binfile_lib."
+ untested "could not compile $binfile_lib."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/arch.exp b/gdb/testsuite/gdb.cell/arch.exp
index 56d2c73..b1e6369 100644
--- a/gdb/testsuite/gdb.cell/arch.exp
+++ b/gdb/testsuite/gdb.cell/arch.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -78,15 +78,15 @@ check_spu_arch ""
send_gdb "thread\n"
gdb_expect 10 {
-re "Current thread is (\[0-9\]*) .*\r\n$gdb_prompt $" {
- pass "Retrieve current thread"
+ pass "retrieve current thread"
set thread_id $expect_out(1,string)
}
-re "$gdb_prompt $" {
- fail "Retrieve current thread"
+ fail "retrieve current thread"
return 0
}
timeout {
- fail "Retrieve current thread (timed out)"
+ fail "retrieve current thread (timed out)"
return 0
}
}
diff --git a/gdb/testsuite/gdb.cell/break.exp b/gdb/testsuite/gdb.cell/break.exp
index 6052479..ba9037c 100644
--- a/gdb/testsuite/gdb.cell/break.exp
+++ b/gdb/testsuite/gdb.cell/break.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
@@ -84,7 +84,7 @@ gdb_expect {
-re ".*$spu_file.c.*Make breakpoint pending.*y or \\\[n\\\]. $" {
gdb_test "y" "Breakpoint.*$spu_file.*pending." "set pending breakpoint"
}
- timeout { fail "Timeout while setting breakpoint in spu binary" }
+ timeout { fail "timeout while setting breakpoint in spu binary" }
}
# Check breakpoints.
diff --git a/gdb/testsuite/gdb.cell/bt.exp b/gdb/testsuite/gdb.cell/bt.exp
index cd5d843..d2e0d21 100644
--- a/gdb/testsuite/gdb.cell/bt.exp
+++ b/gdb/testsuite/gdb.cell/bt.exp
@@ -37,24 +37,24 @@ if {[skip_cell_tests]} {
# Compile SPU binaries.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
if { [gdb_compile_cell_spu $spu2_src $spu2_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_cell_embedspu $spu2_bin $spu2_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o $spu2_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/core.exp b/gdb/testsuite/gdb.cell/core.exp
index 4cd9c7f..68d98bd 100644
--- a/gdb/testsuite/gdb.cell/core.exp
+++ b/gdb/testsuite/gdb.cell/core.exp
@@ -38,16 +38,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/data.exp b/gdb/testsuite/gdb.cell/data.exp
index e373ba4..c4712d5 100644
--- a/gdb/testsuite/gdb.cell/data.exp
+++ b/gdb/testsuite/gdb.cell/data.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/dwarfaddr.exp b/gdb/testsuite/gdb.cell/dwarfaddr.exp
index a733146..f521259 100644
--- a/gdb/testsuite/gdb.cell/dwarfaddr.exp
+++ b/gdb/testsuite/gdb.cell/dwarfaddr.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $srcfile $binary executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/ea-cache.exp b/gdb/testsuite/gdb.cell/ea-cache.exp
index c567f38..b24cda5 100644
--- a/gdb/testsuite/gdb.cell/ea-cache.exp
+++ b/gdb/testsuite/gdb.cell/ea-cache.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/ea-standalone.exp b/gdb/testsuite/gdb.cell/ea-standalone.exp
index 5079f36..b3281c4 100644
--- a/gdb/testsuite/gdb.cell/ea-standalone.exp
+++ b/gdb/testsuite/gdb.cell/ea-standalone.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $srcfile $binary executable {debug}] != "" } {
- unsupported "Compile spu binary failed, so all tests in this file will automatically fail."
+ unsupported "compile spu binary failed, so all tests in this file will automatically fail."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/ea-test.exp b/gdb/testsuite/gdb.cell/ea-test.exp
index 6a5afd2..472efcf 100644
--- a/gdb/testsuite/gdb.cell/ea-test.exp
+++ b/gdb/testsuite/gdb.cell/ea-test.exp
@@ -30,7 +30,7 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $source $binary executable {debug}] != "" } {
- unsupported "Compile spu binary failed, so all tests in this file will automatically fail."
+ unsupported "compile spu binary failed, so all tests in this file will automatically fail."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/f-regs.exp b/gdb/testsuite/gdb.cell/f-regs.exp
index 6e211a6..3c669ec 100644
--- a/gdb/testsuite/gdb.cell/f-regs.exp
+++ b/gdb/testsuite/gdb.cell/f-regs.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/fork.exp b/gdb/testsuite/gdb.cell/fork.exp
index 8437ab9..cb57a1f 100644
--- a/gdb/testsuite/gdb.cell/fork.exp
+++ b/gdb/testsuite/gdb.cell/fork.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/gcore.exp b/gdb/testsuite/gdb.cell/gcore.exp
index ca1d20a..05e4aed 100644
--- a/gdb/testsuite/gdb.cell/gcore.exp
+++ b/gdb/testsuite/gdb.cell/gcore.exp
@@ -38,16 +38,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/mem-access.exp b/gdb/testsuite/gdb.cell/mem-access.exp
index 4ba5e48..82f672f 100644
--- a/gdb/testsuite/gdb.cell/mem-access.exp
+++ b/gdb/testsuite/gdb.cell/mem-access.exp
@@ -34,16 +34,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/ptype.exp b/gdb/testsuite/gdb.cell/ptype.exp
index 291c7c4..70bf9dc 100644
--- a/gdb/testsuite/gdb.cell/ptype.exp
+++ b/gdb/testsuite/gdb.cell/ptype.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/registers.exp b/gdb/testsuite/gdb.cell/registers.exp
index 15b5dbf..cb650e3 100644
--- a/gdb/testsuite/gdb.cell/registers.exp
+++ b/gdb/testsuite/gdb.cell/registers.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/sizeof.exp b/gdb/testsuite/gdb.cell/sizeof.exp
index c576914..73e103e 100644
--- a/gdb/testsuite/gdb.cell/sizeof.exp
+++ b/gdb/testsuite/gdb.cell/sizeof.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/solib-symbol.exp b/gdb/testsuite/gdb.cell/solib-symbol.exp
index 21070bc..064081b 100644
--- a/gdb/testsuite/gdb.cell/solib-symbol.exp
+++ b/gdb/testsuite/gdb.cell/solib-symbol.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cell/solib.exp b/gdb/testsuite/gdb.cell/solib.exp
index 05fcd9b..9633e56 100644
--- a/gdb/testsuite/gdb.cell/solib.exp
+++ b/gdb/testsuite/gdb.cell/solib.exp
@@ -33,16 +33,16 @@ if {[skip_cell_tests]} {
# Compile SPU binary.
if { [gdb_compile_cell_spu $spu_src $spu_bin executable {debug}] != "" } {
- unsupported "Compiling spu binary failed."
+ unsupported "compiling spu binary failed."
return -1
}
# Compile PPU binary.
if { [gdb_cell_embedspu $spu_bin $spu_bin-embed.o {debug}] != "" } {
- unsupported "Embedding spu binary failed."
+ unsupported "embedding spu binary failed."
return -1
}
if { [gdb_compile_cell_ppu [list $ppu_src $spu_bin-embed.o] $ppu_bin executable {debug}] != "" } {
- unsupported "Compiling ppu binary failed."
+ unsupported "compiling ppu binary failed."
return -1
}
diff --git a/gdb/testsuite/gdb.cp/exception.exp b/gdb/testsuite/gdb.cp/exception.exp
index 970cf10..5dd3449 100644
--- a/gdb/testsuite/gdb.cp/exception.exp
+++ b/gdb/testsuite/gdb.cp/exception.exp
@@ -91,7 +91,7 @@ set ok 0
gdb_run_cmd
gdb_test_multiple "" "Run to main" {
-re "Temporary breakpoint 4,.*$gdb_prompt $" {
- pass "Run to main"
+ pass "run to main"
set ok 1
}
}
diff --git a/gdb/testsuite/gdb.cp/gdb2495.exp b/gdb/testsuite/gdb.cp/gdb2495.exp
index 0ce1a53..7fe2b12 100644
--- a/gdb/testsuite/gdb.cp/gdb2495.exp
+++ b/gdb/testsuite/gdb.cp/gdb2495.exp
@@ -54,7 +54,7 @@ if [get_compiler_info "c++"] {
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.cp/local.exp b/gdb/testsuite/gdb.cp/local.exp
index 3312139..62c1fd8 100644
--- a/gdb/testsuite/gdb.cp/local.exp
+++ b/gdb/testsuite/gdb.cp/local.exp
@@ -166,7 +166,7 @@ gdb_test "up" ".*main.*" "up from marker2"
set eol "\[\t \]*\[\r\n\]+\[\t \]*"
gdb_test_multiple "ptype Local" "Local out of scope" {
-re "No symbol \"Local\" in current context.*${gdb_prompt} $" {
- pass "Local out of scope"
+ pass "local out of scope"
}
-re "ptype Local${eol}type = class Local {${eol} public:${eol} int loc1;${eol}.*${eol} char loc_foo\\(char\\);${eol}}${eol}${gdb_prompt} " {
# GCC emits STABS debugging information in a way that doesn't
diff --git a/gdb/testsuite/gdb.cp/templates.exp b/gdb/testsuite/gdb.cp/templates.exp
index c503598..8a60c6d 100644
--- a/gdb/testsuite/gdb.cp/templates.exp
+++ b/gdb/testsuite/gdb.cp/templates.exp
@@ -184,7 +184,7 @@ proc test_template_calls {} {
global gdb_prompt
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return
}
diff --git a/gdb/testsuite/gdb.cp/virtfunc.exp b/gdb/testsuite/gdb.cp/virtfunc.exp
index 04fe5aa..2776b0a 100644
--- a/gdb/testsuite/gdb.cp/virtfunc.exp
+++ b/gdb/testsuite/gdb.cp/virtfunc.exp
@@ -177,7 +177,7 @@ proc test_virtual_calls {} {
global nl
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
return 0
}
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp b/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
index 2f17556..313b56f 100644
--- a/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
+++ b/gdb/testsuite/gdb.dwarf2/dw2-dir-file-name.exp
@@ -327,7 +327,7 @@ lappend opts "additional_flags=-DFDIR=\"fdir\""
lappend opts "additional_flags=-DFILE=\"${srctmpfile}\""
if { [gdb_compile "${asmsrcfile} ${srcdir}/${subdir}/$srcfile" "${binfile}" executable $opts] != "" } {
- untested "Cannot compile ${asmsrcfile} or $srcfile"
+ untested "cannot compile ${asmsrcfile} or $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp b/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
index bb7b53e..a10c5fa 100644
--- a/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
+++ b/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp
@@ -36,7 +36,7 @@ if { [prepare_for_testing "${testfile}.exp" "${testfile}" $srcfile {nodebug}] }
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
continue
}
diff --git a/gdb/testsuite/gdb.guile/guile.exp b/gdb/testsuite/gdb.guile/guile.exp
index 6f4374b..37347b7 100644
--- a/gdb/testsuite/gdb.guile/guile.exp
+++ b/gdb/testsuite/gdb.guile/guile.exp
@@ -27,7 +27,7 @@ gdb_reinitialize_dir $srcdir/$subdir
# We want to do some tests when Guile is not present.
gdb_test_multiple "guile (display 23) (newline)" "verify guile support" {
-re "Undefined command.*$gdb_prompt $" {
- unsupported "Guile not supported."
+ unsupported "guile not supported."
return
}
-re "not supported.*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.linespec/macro-relative.exp b/gdb/testsuite/gdb.linespec/macro-relative.exp
index 8eef3b6..4c6885a 100644
--- a/gdb/testsuite/gdb.linespec/macro-relative.exp
+++ b/gdb/testsuite/gdb.linespec/macro-relative.exp
@@ -22,7 +22,7 @@ if [using_fission] {
}
if [is_remote host] {
- unsupported "Compiling on a remote host does not support a filename with directory."
+ unsupported "compiling on a remote host does not support a filename with directory."
return 0
}
diff --git a/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp b/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
index cda8c4a..dc42720 100644
--- a/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
+++ b/gdb/testsuite/gdb.mi/mi-breakpoint-changed.exp
@@ -31,7 +31,7 @@ set lib_opts "debug"
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
@@ -39,7 +39,7 @@ set MIFLAGS "-i=mi"
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp b/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
index 12a91cd..b1c870e 100644
--- a/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
+++ b/gdb/testsuite/gdb.mi/mi-dprintf-pending.exp
@@ -36,12 +36,12 @@ if {[get_compiler_info]} {
}
if {[gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""} {
- untested "Could not compile $libsrc1"
+ untested "could not compile $libsrc1"
return -1
}
if {[gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile $srcdir/$subdir/$srcfile"
+ untested "could not compile $srcdir/$subdir/$srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp b/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
index 884a19b..d538c68 100644
--- a/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
+++ b/gdb/testsuite/gdb.mi/mi-fullname-deleted.exp
@@ -26,13 +26,13 @@ set srcfileabs [standard_output_file $srcfile]
# "//$srcfile" It is used for the test of compare_filenames_for_search.
if { [regsub {/[^/]+$} $srcfileabs {/\0} srcfileabs] != 1 } {
- xfail "Cannot double the last slash separator"
+ xfail "cannot double the last slash separator"
return -1
}
if { [regsub {^(/[^/]+)/} $srcfileabs {\1subst/} srcfileabssubst] != 1
|| [regsub {^(/[^/]+)/.*$} $srcfileabs {\1} initdir] != 1 } {
- xfail "Missing root subdirectory"
+ xfail "missing root subdirectory"
return -1
}
diff --git a/gdb/testsuite/gdb.mi/mi-logging.exp b/gdb/testsuite/gdb.mi/mi-logging.exp
index b66f5c2..8babed0 100644
--- a/gdb/testsuite/gdb.mi/mi-logging.exp
+++ b/gdb/testsuite/gdb.mi/mi-logging.exp
@@ -54,9 +54,9 @@ close $chan
set mi_log_prompt "\[(\]gdb\[)\] \[\r\n\]+"
if [regexp "\\^done\[\r\n\]+$mi_log_prompt\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt" $logcontent] {
- pass "Log file contents"
+ pass "log file contents"
} else {
- fail "Log file contents"
+ fail "log file contents"
}
# Now try the redirect, which writes into the file only.
@@ -77,9 +77,9 @@ set logcontent [read $chan]
close $chan
if [regexp "1001\\^done\[\r\n\]+$mi_log_prompt.*1002\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt.*1003\\^running\[\r\n\]+\\*running,thread-id=\"all\"\[\r\n\]+$mi_log_prompt\\*stopped,reason=\"end-stepping-range\",.*\[\r\n\]+$mi_log_prompt" $logcontent] {
- pass "Redirect log file contents"
+ pass "redirect log file contents"
} else {
- fail "Redirect log file contents"
+ fail "redirect log file contents"
}
mi_gdb_exit
diff --git a/gdb/testsuite/gdb.mi/mi-pending.exp b/gdb/testsuite/gdb.mi/mi-pending.exp
index 48487ce..668572c 100644
--- a/gdb/testsuite/gdb.mi/mi-pending.exp
+++ b/gdb/testsuite/gdb.mi/mi-pending.exp
@@ -41,12 +41,12 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
if { [gdb_compile_pthreads $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile $srcdir/$subdir/$srcfile."
+ untested "could not compile $srcdir/$subdir/$srcfile."
return -1
}
@@ -111,7 +111,7 @@ mi_gdb_test "-break-insert -p 2 -f pendfunc3" \
mi_send_resuming_command "exec-continue" "continuing execution to thread condition"
# Check if we stopped in thread 2 like we should.
-set testname "Run till MI pending breakpoint on pendfunc3 on thread 2"
+set testname "run till MI pending breakpoint on pendfunc3 on thread 2"
gdb_expect {
-re "\\*stopped,reason=\"breakpoint-hit\",disp=\"keep\",bkptno=\"4\",frame=\{addr=\"$hex\",func=\"pendfunc3\".*thread-id=\"2\".*" {
pass $testname
diff --git a/gdb/testsuite/gdb.mi/mi-solib.exp b/gdb/testsuite/gdb.mi/mi-solib.exp
index 2227987..a867206 100644
--- a/gdb/testsuite/gdb.mi/mi-solib.exp
+++ b/gdb/testsuite/gdb.mi/mi-solib.exp
@@ -42,7 +42,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile_main} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
@@ -61,7 +61,7 @@ mi_gdb_test "777-gdb-set stop-on-solib-events 1" "777\\^done" \
mi_run_with_cli
# Also test that the CLI solib event note is output.
-set test "CLI prints solib event"
+set test "cli prints solib event"
gdb_expect {
-re "~\"Stopped due to shared library event \\(no libraries added or removed\\)\\\\n" {
pass "$test"
diff --git a/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp b/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
index 55c66a5..b0f6c31 100644
--- a/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
+++ b/gdb/testsuite/gdb.mi/new-ui-mi-sync.exp
@@ -40,7 +40,7 @@ proc do_test {sync_command} {
mi_gdb_exit
if {[mi_gdb_start "separate-mi-tty"] != 0} {
- fail "Could not start gdb"
+ fail "could not start gdb"
return
}
diff --git a/gdb/testsuite/gdb.multi/multi-arch-exec.exp b/gdb/testsuite/gdb.multi/multi-arch-exec.exp
index 88e5a62..50f63c2 100644
--- a/gdb/testsuite/gdb.multi/multi-arch-exec.exp
+++ b/gdb/testsuite/gdb.multi/multi-arch-exec.exp
@@ -64,7 +64,7 @@ if { [istarget "aarch64*-*-*"] } {
if {[info exists ARM_CC_FOR_TARGET]} {
lappend options "compiler=${ARM_CC_FOR_TARGET}"
} else {
- unsupported "ARM compiler is not known"
+ unsupported "arm compiler is not known"
return -1
}
} else {
diff --git a/gdb/testsuite/gdb.multi/multi-arch.exp b/gdb/testsuite/gdb.multi/multi-arch.exp
index b114a2f..32d84ca 100644
--- a/gdb/testsuite/gdb.multi/multi-arch.exp
+++ b/gdb/testsuite/gdb.multi/multi-arch.exp
@@ -63,7 +63,7 @@ if [istarget "aarch64*-*-*"] {
if {[info exists ARM_CC_FOR_TARGET]} {
lappend options "compiler=${ARM_CC_FOR_TARGET}"
} else {
- unsupported "ARM compiler is not known"
+ unsupported "arm compiler is not known"
return -1
}
} else {
diff --git a/gdb/testsuite/gdb.opt/solib-intra-step.exp b/gdb/testsuite/gdb.opt/solib-intra-step.exp
index c8c156f..d6ec632 100644
--- a/gdb/testsuite/gdb.opt/solib-intra-step.exp
+++ b/gdb/testsuite/gdb.opt/solib-intra-step.exp
@@ -36,7 +36,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib ${srcfile_lib} ${binfile_lib} $lib_flags] != ""
|| [gdb_compile ${srcfile} ${binfile} executable $bin_flags] != "" } {
- untested "Could not compile $binfile_lib or $binfile."
+ untested "could not compile $binfile_lib or $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-breakpoint.exp b/gdb/testsuite/gdb.python/py-breakpoint.exp
index d4a1a48..7503f5a 100644
--- a/gdb/testsuite/gdb.python/py-breakpoint.exp
+++ b/gdb/testsuite/gdb.python/py-breakpoint.exp
@@ -38,7 +38,7 @@ proc test_bkpt_basic { } {
gdb_test "python print (gdb.breakpoints())" "\\(\\)"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -123,7 +123,7 @@ proc test_bkpt_deletion { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -161,7 +161,7 @@ proc test_bkpt_cond_and_cmds { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -213,7 +213,7 @@ proc test_bkpt_invisible { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -263,7 +263,7 @@ proc test_watchpoints { } {
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -288,7 +288,7 @@ proc test_bkpt_internal { } {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
@@ -318,7 +318,7 @@ proc test_bkpt_eval_funcs { } {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
@@ -434,7 +434,7 @@ proc test_bkpt_temporary { } {
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
delete_breakpoints
diff --git a/gdb/testsuite/gdb.python/py-cmd.exp b/gdb/testsuite/gdb.python/py-cmd.exp
index 4742c44..0665b8e 100644
--- a/gdb/testsuite/gdb.python/py-cmd.exp
+++ b/gdb/testsuite/gdb.python/py-cmd.exp
@@ -28,7 +28,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-events.exp b/gdb/testsuite/gdb.python/py-events.exp
index de8de07..547870a 100644
--- a/gdb/testsuite/gdb.python/py-events.exp
+++ b/gdb/testsuite/gdb.python/py-events.exp
@@ -34,7 +34,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-evthreads.exp b/gdb/testsuite/gdb.python/py-evthreads.exp
index 93ff83d..c14b49a 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.exp
+++ b/gdb/testsuite/gdb.python/py-evthreads.exp
@@ -46,7 +46,7 @@ gdb_breakpoint "thread2"
gdb_breakpoint "thread3"
gdb_run_cmd
-set test "Run to breakpoint 1"
+set test "run to breakpoint 1"
gdb_test_multiple "" $test {
-re "event type: stop\r\nstop reason: breakpoint\r\nfirst breakpoint number: 1\r\nbreakpoint number: 1\r\nthread num: 1\r\n.*$gdb_prompt $" {
pass $test
diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
index 81c7bbd..218baed 100644
--- a/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
+++ b/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
@@ -37,7 +37,7 @@ if [get_compiler_info] {
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
- untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
return -1
}
@@ -64,7 +64,7 @@ clean_restart ${testfile}
gdb_load_shlib ${lib_sl}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -115,7 +115,7 @@ gdb_test "source $python_file" "Python script imported.*" \
set cond_line [gdb_get_line_number "Condition Break."]
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -168,7 +168,7 @@ gdb_test "source $python_file" "Python script imported.*" \
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -193,7 +193,7 @@ gdb_test "source $python_file" "Python script imported.*" \
"import python scripts"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -220,7 +220,7 @@ gdb_test "source $python_file" "Python script imported.*" \
"import python scripts"
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
@@ -247,7 +247,7 @@ gdb_test "print increase(&i)" \
#
if ![runto "test_exec_exit"] then {
- fail "Cannot run to test_exec_exit."
+ fail "cannot run to test_exec_exit."
return 0
}
@@ -260,7 +260,7 @@ gdb_test "continue" "SimpleFinishBreakpoint out of scope.*" "catch out of scope
#
if ![runto "test_exec_exit"] then {
- fail "Cannot run to test_exec_exit."
+ fail "cannot run to test_exec_exit."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
index 0e8c492..8859d71 100644
--- a/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
+++ b/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp
@@ -28,7 +28,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug c++}]} {
if { [skip_python_tests] } { continue }
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/py-shared.exp b/gdb/testsuite/gdb.python/py-shared.exp
index 4a0c738..ae7a09c 100644
--- a/gdb/testsuite/gdb.python/py-shared.exp
+++ b/gdb/testsuite/gdb.python/py-shared.exp
@@ -28,14 +28,14 @@ set libsrc ${libfile}.c
set library [standard_output_file ${libfile}.sl]
if { [gdb_compile_shlib ${srcdir}/${subdir}/${libsrc} ${library} "debug"] != "" } {
- untested "Could not compile shared library."
+ untested "could not compile shared library."
return -1
}
set exec_opts [list debug shlib=${library}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.python/py-symbol.exp b/gdb/testsuite/gdb.python/py-symbol.exp
index 4cdb3b8..7910c4b 100644
--- a/gdb/testsuite/gdb.python/py-symbol.exp
+++ b/gdb/testsuite/gdb.python/py-symbol.exp
@@ -167,7 +167,7 @@ gdb_test "python print (cplusfunc.addr_class == gdb.SYMBOL_LOC_BLOCK)" "True" "T
# Start with a fresh gdb.
clean_restart ${testfile}
if ![runto_main] then {
- fail "Cannot run to main."
+ fail "cannot run to main."
return 0
}
diff --git a/gdb/testsuite/gdb.python/python.exp b/gdb/testsuite/gdb.python/python.exp
index 4072fa3..aeef019 100644
--- a/gdb/testsuite/gdb.python/python.exp
+++ b/gdb/testsuite/gdb.python/python.exp
@@ -324,7 +324,7 @@ gdb_test_multiple "set prompt blah " "set blah in GDB" {
gdb_test_multiple "python gdb.prompt_hook = None" "Delete hook" {
-re "\[\r\n\]$newprompt2 $" {
- pass "Delete old hook"
+ pass "delete old hook"
}
}
diff --git a/gdb/testsuite/gdb.reverse/insn-reverse.exp b/gdb/testsuite/gdb.reverse/insn-reverse.exp
index f52b40c..a252959 100644
--- a/gdb/testsuite/gdb.reverse/insn-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/insn-reverse.exp
@@ -119,7 +119,7 @@ proc test { func } {
set n_testcases [get_integer_valueof "n_testcases" 0]
if { ${n_testcases} == 0 } {
- untested "No test"
+ untested "no test"
return 1
}
diff --git a/gdb/testsuite/gdb.reverse/solib-precsave.exp b/gdb/testsuite/gdb.reverse/solib-precsave.exp
index 6ce26eb..3d1f4cb 100644
--- a/gdb/testsuite/gdb.reverse/solib-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/solib-precsave.exp
@@ -40,12 +40,12 @@ if [get_compiler_info] {
# Compile the first without debug info so that
# stepping and reverse stepping doesn't end up inside them.
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib1src} ${library1} ""] != "" } {
- untested "Could not compile shared library1."
+ untested "could not compile shared library1."
return -1
}
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib2src} ${library2} "debug"] != "" } {
- untested "Could not compile shared library2."
+ untested "could not compile shared library2."
return -1
}
@@ -58,7 +58,7 @@ set exec_opts [list debug shlib=${library1} shlib=${library2}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable \
[concat $exec_opts additional_flags=-Wl,-z,norelro]] != ""
&& [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.reverse/solib-reverse.exp b/gdb/testsuite/gdb.reverse/solib-reverse.exp
index a370e94..1389952 100644
--- a/gdb/testsuite/gdb.reverse/solib-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/solib-reverse.exp
@@ -38,19 +38,19 @@ if [get_compiler_info] {
# Compile the first without debug info so that
# stepping and reverse stepping doesn't end up inside them.
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib1src} ${library1} ""] != "" } {
- untested "Could not compile shared library1."
+ untested "could not compile shared library1."
return -1
}
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib2src} ${library2} "debug"] != "" } {
- untested "Could not compile shared library2."
+ untested "could not compile shared library2."
return -1
}
set exec_opts [list debug shlib=${library1} shlib=${library2}]
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable $exec_opts] != "" } {
- untested "Could not compile $binfile."
+ untested "could not compile $binfile."
return -1
}
diff --git a/gdb/testsuite/gdb.stabs/weird.exp b/gdb/testsuite/gdb.stabs/weird.exp
index 2a8ef3e..699b26b 100644
--- a/gdb/testsuite/gdb.stabs/weird.exp
+++ b/gdb/testsuite/gdb.stabs/weird.exp
@@ -305,7 +305,7 @@ gdb_expect 60 {
pass "weirdx.o read without error"
}
-re ".*$gdb_prompt $" {
- fail "Errors reading weirdx.o"
+ fail "errors reading weirdx.o"
}
timeout {
perror "couldn't load $binfile into $GDB (timed out)."
diff --git a/gdb/testsuite/gdb.threads/hand-call-in-threads.exp b/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
index 67c2c8e..7a8bb8f 100644
--- a/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
+++ b/gdb/testsuite/gdb.threads/hand-call-in-threads.exp
@@ -26,7 +26,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
index 556902c..f32de56 100644
--- a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
+++ b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
@@ -27,7 +27,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.threads/killed.exp b/gdb/testsuite/gdb.threads/killed.exp
index e62ed3f..dfa9325 100644
--- a/gdb/testsuite/gdb.threads/killed.exp
+++ b/gdb/testsuite/gdb.threads/killed.exp
@@ -75,12 +75,12 @@ gdb_expect {
exp_continue
}
eof {
- pass "GDB exits after multi-threaded program exits messily"
+ pass "gdb exits after multi-threaded program exits messily"
}
-re "Cannot find thread ${decimal}: generic error\[\r\n\]*$gdb_prompt $" {
kfail "gdb/568" "GDB exits after multi-threaded program exits messily"
}
timeout {
- fail "GDB exits after multi-threaded program exits messily (timeout)"
+ fail "gdb exits after multi-threaded program exits messily (timeout)"
}
}
diff --git a/gdb/testsuite/gdb.threads/linux-dp.exp b/gdb/testsuite/gdb.threads/linux-dp.exp
index 9f717c7..400fb16 100644
--- a/gdb/testsuite/gdb.threads/linux-dp.exp
+++ b/gdb/testsuite/gdb.threads/linux-dp.exp
@@ -98,7 +98,7 @@ for {set i 0} {$i < 5} {incr i} {
# It would be nice if we could catch the message that GDB prints
# when it first notices that the thread library doesn't support
# debugging, or if we could explicitly ask GDB somehow.
- unsupported "This GDB does not support threads on this system."
+ unsupported "this GDB does not support threads on this system."
return -1
}
-re "$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.threads/manythreads.exp b/gdb/testsuite/gdb.threads/manythreads.exp
index 0dd72b7..6a82682 100644
--- a/gdb/testsuite/gdb.threads/manythreads.exp
+++ b/gdb/testsuite/gdb.threads/manythreads.exp
@@ -175,10 +175,10 @@ gdb_test_multiple "quit" "GDB exits after stopping multithreaded program" {
exp_continue
}
eof {
- pass "GDB exits after stopping multithreaded program"
+ pass "gdb exits after stopping multithreaded program"
}
timeout {
- fail "GDB exits after stopping multithreaded program (timeout)"
+ fail "gdb exits after stopping multithreaded program (timeout)"
}
}
diff --git a/gdb/testsuite/gdb.threads/print-threads.exp b/gdb/testsuite/gdb.threads/print-threads.exp
index 1cbec5f..3ead23c 100644
--- a/gdb/testsuite/gdb.threads/print-threads.exp
+++ b/gdb/testsuite/gdb.threads/print-threads.exp
@@ -50,16 +50,16 @@ proc test_all_threads { name kill } {
gdb_test_multiple "continue" "all threads ran once" {
-re "Breakpoint \[0-9\]+, thread_function \\(arg=.*\\) at .*print-threads.c:\[0-9\]+.*$gdb_prompt" {
set i [expr $i + 1]
- pass "Hit thread_function breakpoint, $i ($name)"
+ pass "hit thread_function breakpoint, $i ($name)"
send_gdb "continue\n"
exp_continue
}
-re "Breakpoint \[0-9\]+, .* kill \\(.*\\) .*$gdb_prompt" {
set j [expr $j + 1]
if { $kill == 1 } {
- pass "Hit kill breakpoint, $j ($name)"
+ pass "hit kill breakpoint, $j ($name)"
} else {
- fail "Hit kill breakpoint, $j ($name) (unexpected)"
+ fail "hit kill breakpoint, $j ($name) (unexpected)"
}
send_gdb "continue\n"
exp_continue
@@ -76,7 +76,7 @@ proc test_all_threads { name kill } {
if { $kill == 1 } {
kfail "gdb/1265" "Running threads ($name) (zombie thread)"
} else {
- fail "Running threads ($name) (unknown output)"
+ fail "running threads ($name) (unknown output)"
}
}
}
diff --git a/gdb/testsuite/gdb.threads/pthreads.exp b/gdb/testsuite/gdb.threads/pthreads.exp
index 1fb27cf..2d26505 100644
--- a/gdb/testsuite/gdb.threads/pthreads.exp
+++ b/gdb/testsuite/gdb.threads/pthreads.exp
@@ -189,13 +189,13 @@ proc check_control_c {} {
# Verify that all threads are running.
if [all_threads_running] then {
- pass "All threads running after startup"
+ pass "all threads running after startup"
}
# Send a continue followed by ^C to the process to stop it.
gdb_test_multiple "continue" "continue with all threads running" {
-re "Continuing." {
- pass "Continue with all threads running"
+ pass "continue with all threads running"
}
}
after 2000
@@ -217,7 +217,7 @@ proc check_control_c {} {
# Verify that all threads can be run again after a ^C stop.
if [all_threads_running] then {
- pass "All threads running after continuing from ^C stop"
+ pass "all threads running after continuing from ^C stop"
}
return 0
}
diff --git a/gdb/testsuite/gdb.threads/staticthreads.exp b/gdb/testsuite/gdb.threads/staticthreads.exp
index 16fcb68..f0a844c 100644
--- a/gdb/testsuite/gdb.threads/staticthreads.exp
+++ b/gdb/testsuite/gdb.threads/staticthreads.exp
@@ -42,7 +42,7 @@ gdb_test_no_output "set print sevenbit-strings"
runto_main
gdb_test "break sem_post"
-set test "Continue to main's call of sem_post"
+set test "continue to main's call of sem_post"
gdb_test_multiple "continue" "$test" {
-re "Breakpoint .*, .*sem_post .*$gdb_prompt " {
pass "$test"
@@ -65,7 +65,7 @@ if [istarget hppa*-*-*] {
rerun_to_main
gdb_test "handle $sig nostop noprint pass"
-set test "Handle $sig helps"
+set test "handle $sig helps"
gdb_test "continue" " .*sem_post .*" "handle $sig helps"
@@ -84,7 +84,7 @@ gdb_test_multiple "info threads" "$test" {
# Check that the program can be quit.
-set test "GDB exits with static thread program"
+set test "gdb exits with static thread program"
gdb_test_multiple "quit" "$test" {
-re "Quit anyway\\? \\(y or n\\) $" {
send_gdb "y\n"
diff --git a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
index 1327c7e..2eae809 100644
--- a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
+++ b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
@@ -27,7 +27,7 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
- unsupported "This target can not call functions"
+ unsupported "this target can not call functions"
continue
}
diff --git a/gdb/testsuite/gdb.threads/tls.exp b/gdb/testsuite/gdb.threads/tls.exp
index 5c07844..cb5ac8a 100644
--- a/gdb/testsuite/gdb.threads/tls.exp
+++ b/gdb/testsuite/gdb.threads/tls.exp
@@ -263,7 +263,7 @@ foreach i [array names spin_threads] {
}
if {$thrs_in_spin == 0} {
- fail "No thread backtrace reported spin (vsyscall kernel problem?)"
+ fail "no thread backtrace reported spin (vsyscall kernel problem?)"
}
gdb_test "continue" ".*Breakpoint 4.*before exit.*" "threads exited"
@@ -271,10 +271,10 @@ gdb_test "continue" ".*Breakpoint 4.*before exit.*" "threads exited"
send_gdb "info thread\n"
gdb_expect {
-re ".* 1 *Thread.*2 *Thread.*$gdb_prompt $" {
- fail "Too many threads left at end"
+ fail "too many threads left at end"
}
-re ".*\\\* 1 *Thread.*main.*$gdb_prompt $" {
- pass "Expect only base thread at end"
+ pass "expect only base thread at end"
}
-re ".*No stack.*$gdb_prompt $" {
fail "runaway at end"
diff --git a/gdb/testsuite/gdb.threads/wp-replication.exp b/gdb/testsuite/gdb.threads/wp-replication.exp
index 12ec87a..88a2e06 100644
--- a/gdb/testsuite/gdb.threads/wp-replication.exp
+++ b/gdb/testsuite/gdb.threads/wp-replication.exp
@@ -43,7 +43,7 @@ gdb_test_no_output "set can-use-hw-watchpoints 1" ""
# Run to `main' where we begin our tests.
if ![runto_main] then {
- fail "Failed to run to main"
+ fail "failed to run to main"
return 0
}
@@ -86,7 +86,7 @@ gdb_test_no_output "set breakpoint always-inserted off"
# (through board settings) that it did not support them in the first place.
# Just exit.
if { $hwatch_count == 0} {
- fail "No hardware watchpoints available"
+ fail "no hardware watchpoints available"
return 0
}
diff --git a/gdb/testsuite/gdb.trace/actions-changed.exp b/gdb/testsuite/gdb.trace/actions-changed.exp
index 296277a..d2718f0 100644
--- a/gdb/testsuite/gdb.trace/actions-changed.exp
+++ b/gdb/testsuite/gdb.trace/actions-changed.exp
@@ -165,7 +165,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
index c4d1605..b129eb5 100644
--- a/gdb/testsuite/gdb.trace/actions.exp
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -39,7 +39,7 @@ gdb_file_cmd $binfile
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/backtrace.exp b/gdb/testsuite/gdb.trace/backtrace.exp
index 881a798..036bcca 100644
--- a/gdb/testsuite/gdb.trace/backtrace.exp
+++ b/gdb/testsuite/gdb.trace/backtrace.exp
@@ -33,7 +33,7 @@ if ![runto_main] {
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -58,7 +58,7 @@ set arg6 6
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/change-loc.exp b/gdb/testsuite/gdb.trace/change-loc.exp
index 9fef3f0..360664c 100644
--- a/gdb/testsuite/gdb.trace/change-loc.exp
+++ b/gdb/testsuite/gdb.trace/change-loc.exp
@@ -39,7 +39,7 @@ set additional_flags [list debug shlib=$lib_sl1 shlib_load [gdb_target_symbol_pr
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $additional_flags] != ""} {
- untested "Could not compile either $libsrc1 or $srcdir/$subdir/$srcfile."
+ untested "could not compile either $libsrc1 or $srcdir/$subdir/$srcfile."
return -1
}
@@ -54,7 +54,7 @@ if ![runto_main] {
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/collection.exp b/gdb/testsuite/gdb.trace/collection.exp
index f225429..c2f2b5c 100644
--- a/gdb/testsuite/gdb.trace/collection.exp
+++ b/gdb/testsuite/gdb.trace/collection.exp
@@ -777,7 +777,7 @@ proc gdb_trace_collection_test {} {
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/deltrace.exp b/gdb/testsuite/gdb.trace/deltrace.exp
index 652b6c1..bffd575 100644
--- a/gdb/testsuite/gdb.trace/deltrace.exp
+++ b/gdb/testsuite/gdb.trace/deltrace.exp
@@ -38,7 +38,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
set testline1 [expr $baseline + 4]
diff --git a/gdb/testsuite/gdb.trace/entry-values.exp b/gdb/testsuite/gdb.trace/entry-values.exp
index e8ed517..8270773 100644
--- a/gdb/testsuite/gdb.trace/entry-values.exp
+++ b/gdb/testsuite/gdb.trace/entry-values.exp
@@ -80,7 +80,7 @@ gdb_test_multiple $test $test {
}
if { [string equal $returned_from_foo ""] } {
- fail "Find the call or branch instruction offset in bar"
+ fail "find the call or branch instruction offset in bar"
# The following test makes no sense if the offset is unknown. We need
# to update the pattern above to match call or branch instruction for
# the target architecture.
diff --git a/gdb/testsuite/gdb.trace/ftrace-lock.exp b/gdb/testsuite/gdb.trace/ftrace-lock.exp
index 0b12c8d..80c9bd7 100644
--- a/gdb/testsuite/gdb.trace/ftrace-lock.exp
+++ b/gdb/testsuite/gdb.trace/ftrace-lock.exp
@@ -65,7 +65,7 @@ if ![runto_main] {
}
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/ftrace.exp b/gdb/testsuite/gdb.trace/ftrace.exp
index e90485c..4bce1e9 100644
--- a/gdb/testsuite/gdb.trace/ftrace.exp
+++ b/gdb/testsuite/gdb.trace/ftrace.exp
@@ -177,7 +177,7 @@ proc test_fast_tracepoints {} {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/infotrace.exp b/gdb/testsuite/gdb.trace/infotrace.exp
index 7ba212a..9e72df8 100644
--- a/gdb/testsuite/gdb.trace/infotrace.exp
+++ b/gdb/testsuite/gdb.trace/infotrace.exp
@@ -107,7 +107,7 @@ if {[gdb_test "" "Breakpoint ${decimal}, main.*"] != 0} {
}
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
index 567954a..60a879d 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
@@ -27,7 +27,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
index a49cd17..afca7c8 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
@@ -27,7 +27,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp b/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
index ce02389..ddea238 100644
--- a/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-traceframe-changed.exp
@@ -115,7 +115,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp b/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
index a0e49af..2514cfe 100644
--- a/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-tracepoint-changed.exp
@@ -32,13 +32,13 @@ set lib_opts [gdb_target_symbol_prefix_flags]
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
@@ -252,7 +252,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/mi-tsv-changed.exp b/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
index 1a4783d..499b660 100644
--- a/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
+++ b/gdb/testsuite/gdb.trace/mi-tsv-changed.exp
@@ -70,7 +70,7 @@ proc test_create_delete_modify_tsv { } {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
gdb_exit
@@ -238,7 +238,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/no-attach-trace.exp b/gdb/testsuite/gdb.trace/no-attach-trace.exp
index 7ee8a4f..095c3ca 100644
--- a/gdb/testsuite/gdb.trace/no-attach-trace.exp
+++ b/gdb/testsuite/gdb.trace/no-attach-trace.exp
@@ -31,7 +31,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
clean_restart $testfile
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/packetlen.exp b/gdb/testsuite/gdb.trace/packetlen.exp
index 93bfc79..a790063 100644
--- a/gdb/testsuite/gdb.trace/packetlen.exp
+++ b/gdb/testsuite/gdb.trace/packetlen.exp
@@ -34,7 +34,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/passc-dyn.exp b/gdb/testsuite/gdb.trace/passc-dyn.exp
index c5e2e2b..d8d68ec 100644
--- a/gdb/testsuite/gdb.trace/passc-dyn.exp
+++ b/gdb/testsuite/gdb.trace/passc-dyn.exp
@@ -33,7 +33,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -49,7 +49,7 @@ if { ![gdb_target_supports_trace] } then {
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/passcount.exp b/gdb/testsuite/gdb.trace/passcount.exp
index 2ec858a..df7e39d 100644
--- a/gdb/testsuite/gdb.trace/passcount.exp
+++ b/gdb/testsuite/gdb.trace/passcount.exp
@@ -37,7 +37,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/pending.exp b/gdb/testsuite/gdb.trace/pending.exp
index f7905fb..fe9e566 100644
--- a/gdb/testsuite/gdb.trace/pending.exp
+++ b/gdb/testsuite/gdb.trace/pending.exp
@@ -31,13 +31,13 @@ set lib_opts [gdb_target_symbol_prefix_flags]
if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
|| [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
- untested "Could not compile either $libsrc1 or $libsrc2"
+ untested "could not compile either $libsrc1 or $libsrc2"
return -1
}
set exec_opts [list debug shlib=$lib_sl1 shlib_load]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
@@ -52,7 +52,7 @@ if ![runto_main] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
@@ -508,7 +508,7 @@ gdb_load_shlib $libipa
lappend exec_opts "shlib=$libipa"
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
- untested "Failed to compile $srcfile"
+ untested "failed to compile $srcfile"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/qtro.exp b/gdb/testsuite/gdb.trace/qtro.exp
index 7bc80b8..6f7bffd 100644
--- a/gdb/testsuite/gdb.trace/qtro.exp
+++ b/gdb/testsuite/gdb.trace/qtro.exp
@@ -40,7 +40,7 @@ if ![gdb_is_target_remote] {
}
if ![gdb_target_supports_trace] {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/range-stepping.exp b/gdb/testsuite/gdb.trace/range-stepping.exp
index ba8c3d2..033aa17 100644
--- a/gdb/testsuite/gdb.trace/range-stepping.exp
+++ b/gdb/testsuite/gdb.trace/range-stepping.exp
@@ -84,7 +84,7 @@ if ![runto_main] {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
range_stepping_with_tracepoint "ftrace"
}
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index 7d89627..f487ec6 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -34,7 +34,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -64,7 +64,7 @@ set arg6 6
set gdb_recursion_test_baseline [gdb_find_recursion_test_baseline $srcfile]
if { $gdb_recursion_test_baseline == -1 } {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/save-trace.exp b/gdb/testsuite/gdb.trace/save-trace.exp
index a70ad54..dfbbdca 100644
--- a/gdb/testsuite/gdb.trace/save-trace.exp
+++ b/gdb/testsuite/gdb.trace/save-trace.exp
@@ -38,7 +38,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/stap-trace.exp b/gdb/testsuite/gdb.trace/stap-trace.exp
index 1c002c1..4cb05d5 100644
--- a/gdb/testsuite/gdb.trace/stap-trace.exp
+++ b/gdb/testsuite/gdb.trace/stap-trace.exp
@@ -42,7 +42,7 @@ proc compile_stap_bin {exec_name {arg ""}} {
if { [gdb_compile "$srcdir/$subdir/$srcfile" \
[standard_output_file $exec_name] \
executable [concat $arg debug nowarnings]] != "" } {
- untested "Could not compile ${srcfile}"
+ untested "could not compile ${srcfile}"
return 0
}
diff --git a/gdb/testsuite/gdb.trace/strace.exp b/gdb/testsuite/gdb.trace/strace.exp
index 6394926..253b07e 100644
--- a/gdb/testsuite/gdb.trace/strace.exp
+++ b/gdb/testsuite/gdb.trace/strace.exp
@@ -33,7 +33,7 @@ set additional_flags [list quiet debug shlib=$libipa shlib_load \
"additional_flags=-lust -lurcu-bp" ]
if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $additional_flags] != ""} {
- untested "UST library or headers are not installed"
+ untested "ust library or headers are not installed"
return -1
}
@@ -386,7 +386,7 @@ if { ![gdb_target_supports_trace] } then {
# file can be removed. Note that GDB simply kill inferior doesn't remove
# the socket file.
gdb_test "detach" "Detaching .*, process .*"
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tfile.exp b/gdb/testsuite/gdb.trace/tfile.exp
index 183b4c3..9f89d3d 100644
--- a/gdb/testsuite/gdb.trace/tfile.exp
+++ b/gdb/testsuite/gdb.trace/tfile.exp
@@ -51,7 +51,7 @@ remote_file target delete $tfile_basic
remote_file target delete $tfile_error
if { ![generate_tracefile $binfile] } {
- unsupported "Unable to generate trace file"
+ unsupported "unable to generate trace file"
return -1
}
diff --git a/gdb/testsuite/gdb.trace/tfind.exp b/gdb/testsuite/gdb.trace/tfind.exp
index d78547d..cfd7db3 100644
--- a/gdb/testsuite/gdb.trace/tfind.exp
+++ b/gdb/testsuite/gdb.trace/tfind.exp
@@ -63,7 +63,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
@@ -75,7 +75,7 @@ if { ![gdb_target_supports_trace] } then {
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
diff --git a/gdb/testsuite/gdb.trace/trace-break.exp b/gdb/testsuite/gdb.trace/trace-break.exp
index a90d02d..043e369 100644
--- a/gdb/testsuite/gdb.trace/trace-break.exp
+++ b/gdb/testsuite/gdb.trace/trace-break.exp
@@ -369,7 +369,7 @@ if ![runto_main] {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
foreach break_always_inserted { "on" "off" } {
break_trace_same_addr_1 "ftrace" ${break_always_inserted}
diff --git a/gdb/testsuite/gdb.trace/trace-condition.exp b/gdb/testsuite/gdb.trace/trace-condition.exp
index e36dba4..b636c0c 100644
--- a/gdb/testsuite/gdb.trace/trace-condition.exp
+++ b/gdb/testsuite/gdb.trace/trace-condition.exp
@@ -58,7 +58,7 @@ if ![runto_main] {
}
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/trace-mt.exp b/gdb/testsuite/gdb.trace/trace-mt.exp
index b580344..f424d5d 100644
--- a/gdb/testsuite/gdb.trace/trace-mt.exp
+++ b/gdb/testsuite/gdb.trace/trace-mt.exp
@@ -124,7 +124,7 @@ if ![runto_main] {
gdb_reinitialize_dir $srcdir/$subdir
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
- untested "Could not find IPA lib loaded"
+ untested "could not find IPA lib loaded"
} else {
foreach break_always_inserted { "on" "off" } {
break_trace_same_addr "ftrace" ${break_always_inserted}
diff --git a/gdb/testsuite/gdb.trace/tracecmd.exp b/gdb/testsuite/gdb.trace/tracecmd.exp
index 11ef691..645dcbc 100644
--- a/gdb/testsuite/gdb.trace/tracecmd.exp
+++ b/gdb/testsuite/gdb.trace/tracecmd.exp
@@ -37,7 +37,7 @@ gdb_file_cmd $binfile
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile]
if { $baseline == -1 } then {
- fail "Could not find gdb_recursion_test function"
+ fail "could not find gdb_recursion_test function"
return
}
@@ -163,9 +163,9 @@ gdb_delete_tracepoints
# Acceptance vs rejection of a location are target-specific, so allow both.
gdb_test_multiple "ftrace gdb_recursion_test" "Set a fast tracepoint" {
-re "Fast tracepoint $decimal at $hex: file.*$srcfile, line $testline1.*$gdb_prompt $" {
- pass "Set a fast tracepoint"
+ pass "set a fast tracepoint"
}
-re ".*May not have a fast tracepoint at $hex.*$gdb_prompt $" {
- pass "Declined to set a fast tracepoint"
+ pass "declined to set a fast tracepoint"
}
}
diff --git a/gdb/testsuite/gdb.trace/tspeed.exp b/gdb/testsuite/gdb.trace/tspeed.exp
index e638839..885fe23 100644
--- a/gdb/testsuite/gdb.trace/tspeed.exp
+++ b/gdb/testsuite/gdb.trace/tspeed.exp
@@ -128,7 +128,7 @@ clean_restart $executable
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/tsv.exp b/gdb/testsuite/gdb.trace/tsv.exp
index f146745..2da6f16 100644
--- a/gdb/testsuite/gdb.trace/tsv.exp
+++ b/gdb/testsuite/gdb.trace/tsv.exp
@@ -106,7 +106,7 @@ gdb_reinitialize_dir $srcdir/$subdir
# The rest of the testing needs actual tracing to work.
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/unavailable.exp b/gdb/testsuite/gdb.trace/unavailable.exp
index ed1b533..d7cf020 100644
--- a/gdb/testsuite/gdb.trace/unavailable.exp
+++ b/gdb/testsuite/gdb.trace/unavailable.exp
@@ -732,7 +732,7 @@ proc gdb_trace_collection_test {} {
runto_main
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/while-dyn.exp b/gdb/testsuite/gdb.trace/while-dyn.exp
index 79785e2..b090f76 100644
--- a/gdb/testsuite/gdb.trace/while-dyn.exp
+++ b/gdb/testsuite/gdb.trace/while-dyn.exp
@@ -35,7 +35,7 @@ runto_main
gdb_reinitialize_dir $srcdir/$subdir
if { ![gdb_target_supports_trace] } then {
- unsupported "Current target does not support trace"
+ unsupported "current target does not support trace"
return 1
}
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
index fe4588a..f378c04 100644
--- a/gdb/testsuite/gdb.trace/while-stepping.exp
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -41,7 +41,7 @@ gdb_file_cmd $binfile
gdb_delete_tracepoints
set trcpt1 [gdb_gettpnum gdb_c_test]
if { $trcpt1 <= 0 } then {
- fail "Could not find gdb_c_test function"
+ fail "could not find gdb_c_test function"
return
}
diff --git a/gdb/testsuite/lib/gdb-guile.exp b/gdb/testsuite/lib/gdb-guile.exp
index 7789449..c524171 100644
--- a/gdb/testsuite/lib/gdb-guile.exp
+++ b/gdb/testsuite/lib/gdb-guile.exp
@@ -25,11 +25,11 @@ proc skip_guile_tests {} {
gdb_test_multiple "guile (display \"test\\n\")" "verify guile support" {
-re "Undefined command.*$gdb_prompt $" {
- unsupported "Guile not supported."
+ unsupported "guile not supported."
return 1
}
-re "not supported.*$gdb_prompt $" {
- unsupported "Guile support is disabled."
+ unsupported "guile support is disabled."
return 1
}
-re "$gdb_prompt $" {}
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index e1e9880..c090cac 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -1746,7 +1746,7 @@ proc skip_python_tests_prompt { prompt_regexp } {
gdb_test_multiple "python print ('test')" "verify python support" {
-re "not supported.*$prompt_regexp" {
- unsupported "Python support is disabled."
+ unsupported "python support is disabled."
return 1
}
-re "$prompt_regexp" {}
@@ -3150,7 +3150,7 @@ gdb_caching_proc target_is_gdbserver {
global gdb_prompt
set is_gdbserver -1
- set test "Probing for GDBserver"
+ set test "probing for GDBserver"
gdb_test_multiple "monitor help" $test {
-re "The following monitor commands are supported.*Quit GDBserver.*$gdb_prompt $" {
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index 7c2bb3e..d18b9a3 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -269,12 +269,12 @@ proc default_mi_gdb_start { args } {
verbose "GDB initialized."
}
-re ".*unrecognized option.*for a complete list of options." {
- untested "Skip mi tests (not compiled with mi support)."
+ untested "skip mi tests (not compiled with mi support)."
remote_close host
return -1
}
-re ".*Interpreter `mi' unrecognized." {
- untested "Skip mi tests (not compiled with mi support)."
+ untested "skip mi tests (not compiled with mi support)."
remote_close host
return -1
}
@@ -2032,13 +2032,13 @@ proc check_mi_and_console_threads {name} {
}
}
if {$fails > 0} {
- fail "MI and console have same threads ($name)"
+ fail "mi and console have same threads ($name)"
# Send a list of failures to the log
send_log "Console has thread ids: $console_thread_list\n"
send_log "MI has thread ids: $mi_thread_list\n"
} else {
- pass "MI and console have same threads ($name)"
+ pass "mi and console have same threads ($name)"
}
}
}
diff --git a/gdb/testsuite/lib/pascal.exp b/gdb/testsuite/lib/pascal.exp
index 5ef3065..02a63bc 100644
--- a/gdb/testsuite/lib/pascal.exp
+++ b/gdb/testsuite/lib/pascal.exp
@@ -158,12 +158,12 @@ proc gdb_compile_pascal {source destfile type options} {
} elseif { $pascal_compiler_is_gpc == 1 } {
set result [gpc_compile $source $destfile $type $options]
} else {
- unsupported "No pascal compiler found"
+ unsupported "no pascal compiler found"
return "No pascal compiler. Compilation failed."
}
if ![file exists $destfile] {
- unsupported "Pascal compilation failed: $result"
+ unsupported "pascal compilation failed: $result"
return "Pascal compilation failed."
}
}
diff --git a/gdb/testsuite/lib/perftest.exp b/gdb/testsuite/lib/perftest.exp
index 7659ee0..2f8da14 100644
--- a/gdb/testsuite/lib/perftest.exp
+++ b/gdb/testsuite/lib/perftest.exp
@@ -90,7 +90,7 @@ namespace eval PerfTest {
if { [string compare $GDB_PERFTEST_MODE "run"] != 0 } {
if { [eval compile {$compile}] } {
- untested "Could not compile source files."
+ untested "could not compile source files."
return
}
}
diff --git a/gdb/testsuite/lib/prelink-support.exp b/gdb/testsuite/lib/prelink-support.exp
index 0584669..1d28b9b 100644
--- a/gdb/testsuite/lib/prelink-support.exp
+++ b/gdb/testsuite/lib/prelink-support.exp
@@ -62,7 +62,7 @@ proc symlink_resolve {file} {
set loop [expr $loop + 1]
if {$loop > 30} {
- fail "Looping symlink resolution for $file"
+ fail "looping symlink resolution for $file"
return ""
}
}
diff --git a/gdb/testsuite/lib/prompt.exp b/gdb/testsuite/lib/prompt.exp
index 571a5e5..132e472 100644
--- a/gdb/testsuite/lib/prompt.exp
+++ b/gdb/testsuite/lib/prompt.exp
@@ -59,10 +59,10 @@ proc default_prompt_gdb_start { } {
fail "double prompted"
}
-re "\[\r\n\]$gdb_prompt_fail $" {
- fail "GDB initializing first prompt"
+ fail "gdb initializing first prompt"
}
-re "\[\r\n\]$gdb_prompt $" {
- pass "GDB initializing first prompt"
+ pass "gdb initializing first prompt"
}
-re "$gdb_prompt $" {
perror "GDB never initialized."
diff --git a/gdb/testsuite/lib/selftest-support.exp b/gdb/testsuite/lib/selftest-support.exp
index f171cc8..ea8d6f2 100644
--- a/gdb/testsuite/lib/selftest-support.exp
+++ b/gdb/testsuite/lib/selftest-support.exp
@@ -72,7 +72,7 @@ proc selftest_setup { executable function } {
}
if { $gdb_file_cmd_debug_info != "debug" } then {
- untested "No debug information, skipping testcase."
+ untested "no debug information, skipping testcase."
return -1
}
--
2.7.4