[PATCH v4] MIPS: Sync elf.h from binutils
Ying Huang
ying.huang@oss.cipunited.com
Tue Jun 6 02:34:28 GMT 2023
Hi Maciej,
在 2023/6/5 01:02, Maciej W. Rozycki 写道:
> On Fri, 2 Jun 2023, Ying Huang wrote:
>
>> From: Ying Huang <ying.huang@oss.cipunited.com>
>>
>> Add new definitions for the MIPS target, specifically: relocation
>> types, machine flags, section type names, and object attribute tags
>> and values. On MIPS64, up to three relocations may be specified
> Two spaces after a full stop please, as required by the GNU Coding
> Standards.
>
>> diff --git a/elf/elf.h b/elf/elf.h
>> index ac7032b7a5..71c18099ec 100644
>> --- a/elf/elf.h
>> +++ b/elf/elf.h
>> @@ -1685,11 +1688,18 @@ typedef struct
>> #define EF_MIPS_PIC 2 /* Contains PIC code. */
>> #define EF_MIPS_CPIC 4 /* Uses PIC calling sequence. */
>> #define EF_MIPS_XGOT 8
>> -#define EF_MIPS_64BIT_WHIRL 16
>> +#define EF_MIPS_UCODE 16
>> #define EF_MIPS_ABI2 32
>> #define EF_MIPS_ABI_ON32 64
>> +#define EF_MIPS_OPTIONS_FIRST 0x00000080 /* Process the .MIPS.options section first by ld */
>> +#define EF_MIPS_32BITMODE 0x00000100 /* Indicates code compiled for a 64-bit machine in
>> + 32-bit mode(regs are 32-bits wide). */
> Please wrap the comments such as to stay within 79 columns. Also a space
> is missing before the opening paren above.
>
>> #define EF_MIPS_FP64 512 /* Uses FP64 (12 callee-saved). */
>> #define EF_MIPS_NAN2008 1024 /* Uses IEEE 754-2008 NaN encoding. */
>> +#define EF_MIPS_ARCH_ASE 0x0f000000 /* Architectural Extensions used by this file */
> Likewise wrap the comment.
OK.
>
>> +#define EF_MIPS_ARCH_ASE_MDMX 0x08000000 /* Use MDMX multimedia extensions */
>> +#define EF_MIPS_ARCH_ASE_M16 0x04000000 /* Use MIPS-16 ISA extensions */
>> +#define EF_MIPS_ARCH_ASE_MICROMIPS 0x02000000 /* Use MICROMIPS ISA extensions. */
> This definition overruns the column alignment; I think the most readable
> conforming formatting will be:
>
> #define EF_MIPS_ARCH_ASE_MICROMIPS \
> 0x02000000 /* Use MICROMIPS ISA extensions. */
OK.
>
>> @@ -1703,6 +1713,35 @@ typedef struct
>> #define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */
>> #define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32r2 code. */
>> #define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64r2 code. */
>> +#define E_MIPS_ARCH_32R6 0x90000000 /* -mips32r6 code. */
>> +#define E_MIPS_ARCH_64R6 0xa0000000 /* -mips64r6 code. */
> I think all new additions are supposed to start with EF_ rather than E_.
> IIUC the existence of E_ macros has something to do with the old SVR4 ABI
> registry maintained by SCO long ago: you could only add new EF_ macros
> once they've been registered with SCO (someone please correct me if I'm
> wrong).
>
> Also I think the new comments will best be spelt MIPS32r6/MIPS64r6 rather
> than -mips32r6/-mips64r6 for consistency with MIPS32r2/MIPS64r2 above.
OK. I would use EF_*.
>
>> +#define EF_MIPS_ABI 0x0000F000 /* The ABI of the file. Also see EF_MIPS_ABI2 above. */
>> +#define E_MIPS_ABI_O32 0x00001000 /* The original o32 abi. */
>> +#define E_MIPS_ABI_O64 0x00002000 /* O32 extended to work on 64 bit architectures */
> These comments need to be wrapped too. Also each comment needs to end
> with a full stop followed by two spaces.
>
>> +#define E_MIPS_ABI_EABI32 0x00003000 /* EABI in 32 bit mode */
>> +#define E_MIPS_ABI_EABI64 0x00004000 /* EABI in 64 bit mode */
> Missing full stops followed by two spaces here as well.
OK.
>
>> +#define E_MIPS_MACH_SB1 0x008a0000
> This line still uses spaces rather than tabs.
>
>> +#define E_MIPS_MACH_XLR 0x008c0000
> Likewise.
>
>> +#define R_MIPS_PC21_S2 60
>> +#define R_MIPS_PC26_S2 61
>> +#define R_MIPS_PC18_S3 62
>> +#define R_MIPS_PC19_S2 63
>> +#define R_MIPS_PCHI16 64
>> +#define R_MIPS_PCLO16 65
>> +#define R_MIPS16_26 100
>> +#define R_MIPS16_GPREL 101
>> +#define R_MIPS16_GOT16 102
>> +#define R_MIPS16_CALL16 103
>> +#define R_MIPS16_HI16 104
>> +#define R_MIPS16_LO16 105
>> +#define R_MIPS16_TLS_GD 106
>> +#define R_MIPS16_TLS_LDM 107
>> +#define R_MIPS16_TLS_DTPREL_HI16 108
>> +#define R_MIPS16_TLS_DTPREL_LO16 109
>> +#define R_MIPS16_TLS_GOTTPREL 110
>> +#define R_MIPS16_TLS_TPREL_HI16 111
>> +#define R_MIPS16_TLS_TPREL_LO16 112
>> +#define R_MIPS16_PC16_S1 113
> Likewise all the lines above.
>
>> +#define R_MIPS_RELATIVE 128
>> +#define R_MICROMIPS_26_S1 133
>> +#define R_MICROMIPS_HI16 134
>> +#define R_MICROMIPS_LO16 135
>> +#define R_MICROMIPS_GPREL16 136
>> +#define R_MICROMIPS_LITERAL 137
>> +#define R_MICROMIPS_GOT16 138
>> +#define R_MICROMIPS_PC7_S1 139
>> +#define R_MICROMIPS_PC10_S1 140
>> +#define R_MICROMIPS_PC16_S1 141
>> +#define R_MICROMIPS_CALL16 142
>> +#define R_MICROMIPS_GOT_DISP 145
>> +#define R_MICROMIPS_GOT_PAGE 146
>> +#define R_MICROMIPS_GOT_OFST 147
>> +#define R_MICROMIPS_GOT_HI16 148
>> +#define R_MICROMIPS_GOT_LO16 149
>> +#define R_MICROMIPS_SUB 150
>> +#define R_MICROMIPS_HIGHER 151
>> +#define R_MICROMIPS_HIGHEST 152
>> +#define R_MICROMIPS_CALL_HI16 153
>> +#define R_MICROMIPS_CALL_LO16 154
>> +#define R_MICROMIPS_SCN_DISP 155
>> +#define R_MICROMIPS_JALR 156
>> +#define R_MICROMIPS_HI0_LO16 157
>> +#define R_MICROMIPS_TLS_GD 162
>> +#define R_MICROMIPS_TLS_LDM 163
>> +#define R_MICROMIPS_TLS_DTPREL_HI16 164
>> +#define R_MICROMIPS_TLS_DTPREL_LO16 165
>> +#define R_MICROMIPS_TLS_GOTTPREL 166
>> +#define R_MICROMIPS_TLS_TPREL_HI16 169
>> +#define R_MICROMIPS_TLS_TPREL_LO16 170
>> +#define R_MICROMIPS_GPREL7_S2 172
>> +#define R_MICROMIPS_PC23_S2 173
>> +#define R_MIPS_PC32 248
>> +#define R_MIPS_EH 249
>> +#define R_MIPS_GNU_REL16_S2 250
>> +#define R_MIPS_GNU_VTINHERIT 253
>> +#define R_MIPS_GNU_VTENTRY 254
> And these. I realise this file has preexisting issues, but that does not
> mean new ones are supposed to be introduced.
>
> Maciej
OK. And I have a question, can I use space+tab combination when aligned?
Because when I only use tab to align, it occurs:
Vim open file shows alignment, but git diff show not alignment.
Thanks,
Ying
More information about the Libc-alpha
mailing list