[ECOS] Re: Can we add the intel npe package to the latest sources? (was Re: [ECOS] Problems programming Intel's J3 Stratoflash chip)

[Krishna Ganugapati]

see correction on Q 3)
> 3) When Intel says the Redboot do they mean the cvs sources...

should be

When Intel says the Redhat sources do they mean the cvs sources?

-------------------------------------------------
----- Original Message ----- 
From: "Krishna Ganugapati" <krishnag@marakicorp.com>
To: "Mark Salter" <msalter@redhat.com>; <lgagne@yahoo.com>
Cc: <ecos-discuss@sources.redhat.com>
Sent: Friday, June 11, 2004 9:40 AM
Subject: Can we add the intel npe package to the latest sources? (was Re:
[ECOS] Problems programming Intel's J3 Stratoflash chip)


> Hello,
>
> I'm using the latest cvs sources and building redboot for a custom ixp425
> board. We're using the npes on the ixp425 and have downloaded the npe
> packages from Intel. On reading the instructions from Intel it says that
we
> need to download the sources from Redhat(which includes fixes for block
lock
> status bits the StrataFlash 28F128J3(C)). Once that is done, we're
supposed
> to just add  the npe package to these sources using ecosadmin.tcl.
>
> My questions:
>
> 1)I'd like to use the latest cvs sources - I'm integrating some of the pci
> ide support and other stuff.
> Can I  just add the npe package directly to the cvs sources and work off
of
> that? Has anyone done this and can vouch for the npe stuff working off
their
> cvs built Redboot  images?
>
> Note: I was successfully able to add the npe package direct to my
anonymous
> cvs tree..(but that doesn't necessarily mean that the two are compatible)
>
>
> 2)I've seen a few postings (one from Mark Salter saying that the block
lock
> status bits fix for the J3C will be checked in to the latest sources - has
> this been done? I have ye to ssync my source tree - it has been a few
months
> now and was wondering whether this has been done?
>
> 3) When Intel says the Redboot do they mean the cvs sources...
>
> Thanks!
>
> Krishna
>
> -------------------------------------------------
> ----- Original Message ----- 
> From: "Mark Salter" <msalter@redhat.com>
> To: <lgagne@yahoo.com>
> Cc: <ecos-discuss@sources.redhat.com>
> Sent: Tuesday, June 08, 2004 12:20 PM
> Subject: Re: [ECOS] Problems programming Intel's J3 Stratoflash chip.
>
>
> > >>>>> Louis Gagne writes:
> >
> > > Intel has recently bumped up their revision of the
> > > 128Mbit J3 Stratoflash chip (28F128J3).  My Redboot
> > > code handled the J3A version just fine, but with the
> > > J3C version I get errors programming it.  The error is
> > > 0x92.  This error persists even if I unlock the
> > > sectors before trying to program the chip.
> >
> > > Has anyone else run into this issue?  If so, were you
> > > able to overcome the problem?  How did you resolve it?
> >
> > This should have been fixed in CVS with this (if its the bug
> > I'm thinking of):
> >
> > 2003-10-29  Jonathan Larmour  <jifl@eCosCentric.com>
> >
> > * src/flash_unlock_block.c (flash_unlock_block): test lock bit
> > explicitly - newer flash parts use the reserved bits in the
> > returned data.
> >
> > --Mark
> >
> >
> >
> > -- 
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> >
>


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss