[ECOS] how to add ethernet support for SNDS

[Jonathan Larmour]

Roland Caßebohm wrote:
> On Freitag, 20. Februar 2004 05:46, Jonathan Larmour wrote:
>>
>>However, just to be clear, do you know that someone still needs to port the
>>KS32C5000 driver to the SNDS platform? There's a bit of glue required
>>before it will work.
> 
> 
> As I know the ks32c5000 driver works as it is with the SNDS100 board.
> To get a network ready RedBoot for SNDS100 you only have to add the 
> ks32c5000 ethernet package and the generic ethernet package.
> As I can remember is the default phy device the right one, so it
> should work.

I stand corrected. Because it was shared between two platform ports I 
assumed it was going to require per-port customisation, but I forgot it was 
onchip and therefore would be the same (other than potentially the PHY as 
you say). Fair enough!

In that case, I wonder why it isn't listed in ecos.db for the snds100 target.

Jifl
-- 
eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
 >>>>> Visit us in booth 2527 at the Embedded Systems Conference 2004 <<<<<
March 30 - April 1, San Francisco http://www.esconline.com/electronicaUSA/
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss