[ECOS] can't get a network connection via accept

[michael shiloh]

hello,

target: x86, redboot
host  : x86, linux
tools : about 3 weeks old
ecos  : about 3 weeks old

gdb connection: serial

network card: intel etherpro (82559) 

i'm trying to get the network tests to work.
i've turned on a lot of debugging, and i can
see successful calls to  the i82559 drivers
to test and then initialize the board,
then in fact configuration via dhcp takes 
place properly; i get a valid IP address, 
and my gateway and domain are set properly.

so i know the board is capable of getting
to the network.

then i load and run the simple network tests.
i've tried most of them, e.g. server_test.c,
which is very simple. it creates a socket,
binds it to any IP address, port 7734, then
calls accept and listen.

at this point i attempt to connect to my
target over the network, via :

  telnet 192.168.2.86 7734

it is in listen that it seems to hang, and 
this is the case for all the tests i have 
run.

any ideas?

thanks,
michael


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss