[PATCH 2/2] binutils: merge doc subdir up a level

Tue Nov 30 10:18:36 GMT 2021

Sorry, forgot to mention, it is a --enable-targets=all build. Though I 
don't think that makes a difference.

On 11/30/21 7:17 AM, Luis Machado wrote:
> Hi Mike,
> 
> It seems this patch is causing some semi-deterministic failures in 
> parallel builds. Sometimes it fails, other times it doesn't.
> 
> Here's the output of one that has failed:
> 
> -- 
> 
>    GEN      doc/addr2line.1
> 
>                                                  [261/1955]
>    GEN      doc/dlltool.1
> 
> 
>    GEN      doc/nm.1
> touch: cannot touch 'doc/addr2line.1'  GEN      doc/objcopy.1
> 
> 
> : No such file or directory
> 
> Makefile:2017: recipe for target 'doc/addr2line.1' failed
> 
> 
> make[3]: *** [doc/addr2line.1] Error 1
> 
> make[3]: *** Waiting for unfinished jobs....
> 
> 
> touch: cannot touch 'doc/dlltool.1': No such file or directory
> 
>    GEN      doc/objdump.1
> 
> 
>    GEN      doc/ranlib.1
> 
> 
>    GEN      doc/ar.1
> 
> 
> Makefile:2031: recipe for target 'doc/dlltool.1' failed
> 
> 
> make[3]: *** [doc/dlltool.1] Error 1
> 
> 
> touch: cannot touch 'doc/objcopy.1': No such file or directory
> touch: cannot touch 'doc/nm.1'  GEN      doc/strings.1
> 
> 
> Makefile:2045: recipe for target 'doc/objcopy.1' failed
> make[3]: *** [doc/objcopy.1] Error 1
> 
> 
> : No such file or directory
> 
>    GEN      doc/readelf.1
> configure: updating cache ./config.cache
> touch: cannot touch 'doc/objdump.1': No such file or directory
> touch: cannot touch 'doc/ranlib.1': No such file or directory
> touch: cannot touch 'doc/readelf.1'touch: cannot touch 'doc/strings.1': 
> No such file or directory
> : No such file or directory
> touch: cannot touch 'doc/ar.1': No such file or directory
> Makefile:2066: recipe for target 'doc/readelf.1' failed
> make[3]: *** [doc/readelf.1] Error 1
>    GEN      doc/size.1
> Makefile:2024: recipe for target 'doc/ar.1' failed
> make[3]: *** [doc/ar.1] Error 1
> Makefile:2038: recipe for target 'doc/nm.1' failed
> make[3]: *** [doc/nm.1] Error 1
> Makefile:2080: recipe for target 'doc/strings.1' failed
> make[3]: *** [doc/strings.1] Error 1
>    GEN      doc/strip.1
> Makefile:2052: recipe for target 'doc/objdump.1' failed
> make[3]: *** [doc/objdump.1] Error 1
> touch: cannot touch 'doc/strip.1': No such file or directory
> make[4]: Entering directory 
> '/home/luis.machado/work/tcwg/builds/binutils-gdb-arm64-bionic/binutils'
> checking that generated files are newer than configure... done
> configure: creating ./config.status
> Makefile:2059: recipe for target 'doc/ranlib.1' failed
> make[3]: *** [doc/ranlib.1] Error 1
> Makefile:2087: recipe for target 'doc/strip.1' failed
> make[3]: *** [doc/strip.1] Error 1
> touch: cannot touch 'doc/size.1': No such file or directory
> Makefile:2073: recipe for target 'doc/size.1' failed
> make[3]: *** [doc/size.1] Error 1
> 
> -- 
> 
> It is a fresh build from a clean tree. Resuming the build makes it 
> complete, so I suppose there is some race condition somewhere. My build 
> is a -j160. A -j1 completes just fine.
> 
> I'm on Ubuntu 20.04.
> 
> On 11/26/21 1:16 AM, Mike Frysinger via Binutils wrote:
>> This avoids a recursive make into the doc subdir and speeds up the
>> build slightly.  It also allows for more parallelism.
>> ---
>>   binutils/Makefile.am                   |    8 +-
>>   binutils/Makefile.in                   |  594 +++++++++++++-
>>   binutils/configure.ac                  |    2 +-
>>   binutils/doc/Makefile.in               | 1045 ------------------------
>>   binutils/doc/{Makefile.am => local.mk} |  102 ++-
>>   5 files changed, 608 insertions(+), 1143 deletions(-)
>>   delete mode 100644 binutils/doc/Makefile.in
>>   rename binutils/doc/{Makefile.am => local.mk} (77%)
>>
>> diff --git a/binutils/Makefile.am b/binutils/Makefile.am
>> index 9ceb63da7b80..f54dadd921dc 100644
>> --- a/binutils/Makefile.am
>> +++ b/binutils/Makefile.am
>> @@ -17,13 +17,15 @@
>>   # <http://www.gnu.org/licenses/>.
>>   #
>> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects 
>> info-in-builddir no-texinfo.tex
>>   ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>> -SUBDIRS = doc po
>> +SUBDIRS = po
>>   tooldir = $(exec_prefix)/$(target_alias)
>> +MAINTAINERCLEANFILES =
>> +
>>   ## These aren't set by automake, because they appear in
>>   ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
>>   ## thus is not seen by automake.
>> @@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS 
>> $(bin_PROGRAMS) $(noinst_PROGRAMS)
>>         else true; \
>>         fi; \
>>       done
>> +
>> +include doc/local.mk
>> diff --git a/binutils/Makefile.in b/binutils/Makefile.in
>> index 1986261f9e33..336644a3983a 100644
>> --- a/binutils/Makefile.in
>> +++ b/binutils/Makefile.in
>> @@ -32,6 +32,24 @@
>>   # <http://www.gnu.org/licenses/>.
>>   #
>> +#
>> +#   Copyright (C) 2012-2021 Free Software Foundation, Inc.
>> +#
>> +# This file is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU General Public License as published by
>> +# the Free Software Foundation; either version 3 of the License, or
>> +# (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; see the file COPYING3.  If not see
>> +# <http://www.gnu.org/licenses/>.
>> +#
>> +
>>   VPATH = @srcdir@
>>   am__is_gnu_make = { \
>> @@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
>>   am__EXEEXT_11 = addr2line$(EXEEXT)
>>   am__EXEEXT_12 = readelf$(EXEEXT)
>>   am__EXEEXT_13 = elfedit$(EXEEXT)
>> -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
>> +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
>> +    "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
>>   am__EXEEXT_14 = nm-new$(EXEEXT)
>>   am__EXEEXT_15 = strip-new$(EXEEXT)
>>   am__EXEEXT_16 = cxxfilt$(EXEEXT)
>> @@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES) 
>> $(EXTRA_ar_SOURCES) \
>>       $(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
>>       $(strip_new_SOURCES) $(sysdump_SOURCES) \
>>       testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
>> +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
>> +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
>> +am__v_DVIPS_0 = @echo "  DVIPS   " $@;
>> +am__v_DVIPS_1 =
>> +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
>> +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
>> +am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
>> +am__v_MAKEINFO_1 =
>> +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
>> +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
>> +am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
>> +am__v_INFOHTML_1 =
>> +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
>> +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
>> +am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
>> +am__v_TEXI2DVI_1 =
>> +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
>> +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
>> +am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
>> +am__v_TEXI2PDF_1 =
>> +AM_V_texinfo = $(am__v_texinfo_@AM_V@)
>> +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
>> +am__v_texinfo_0 = -q
>> +am__v_texinfo_1 =
>> +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
>> +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
>> +am__v_texidevnull_0 = > /dev/null
>> +am__v_texidevnull_1 =
>> +INFO_DEPS = doc/binutils.info
>> +am__TEXINFO_TEX_DIR = $(srcdir)
>> +DVIS = doc/binutils.dvi
>> +PDFS = doc/binutils.pdf
>> +PSS = doc/binutils.ps
>> +HTMLS = doc/binutils.html
>> +TEXINFOS = doc/binutils.texi
>> +TEXI2PDF = $(TEXI2DVI) --pdf --batch
>> +MAKEINFOHTML = $(MAKEINFO) --html
>> +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
>> +DVIPS = dvips
>>   RECURSIVE_TARGETS = all-recursive check-recursive 
>> cscopelist-recursive \
>>       ctags-recursive dvi-recursive html-recursive info-recursive \
>>       install-data-recursive install-dvi-recursive \
>> @@ -369,6 +427,9 @@ am__can_run_installinfo = \
>>       n|no|NO) false;; \
>>       *) (install-info --version) >/dev/null 2>&1;; \
>>     esac
>> +man1dir = $(mandir)/man1
>> +NROFF = nroff
>> +MANS = $(man_MANS)
>>   RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive    \
>>     distclean-recursive maintainer-clean-recursive
>>   am__recursive_targets = \
>> @@ -569,10 +630,11 @@ top_builddir = @top_builddir@
>>   top_srcdir = @top_srcdir@
>>   zlibdir = @zlibdir@
>>   zlibinc = @zlibinc@
>> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects 
>> info-in-builddir no-texinfo.tex
>>   ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>> -SUBDIRS = doc po
>> +SUBDIRS = po
>>   tooldir = $(exec_prefix)/$(target_alias)
>> +MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
>>   # Automake 1.10+ disables lex and yacc output file regeneration if
>>   # maintainer mode is disabled.  Avoid this.
>> @@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp 
>> development.exp \
>>   MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) 
>> bin2c$(EXEEXT_FOR_BUILD) \
>>     binutils.log binutils.sum abcdefgh*
>> +
>> +# What version of the manual you want; "all" includes everything
>> +CONFIG = all
>> +
>> +# Options to extract the man page from as.texinfo
>> +MANCONF = -Dman
>> +TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
>> +POD2MAN = pod2man --center="GNU Development Tools" \
>> +     --release="binutils-$(VERSION)" --section=1
>> +
>> +
>> +# List of man pages generated from binutils.texi
>> +man_MANS = \
>> +    doc/addr2line.1 \
>> +    doc/ar.1 \
>> +    doc/dlltool.1 \
>> +    doc/nm.1 \
>> +    doc/objcopy.1 \
>> +    doc/objdump.1 \
>> +    doc/ranlib.1 \
>> +    doc/readelf.1 \
>> +    doc/size.1 \
>> +    doc/strings.1 \
>> +    doc/strip.1 \
>> +    doc/elfedit.1 \
>> +    doc/windres.1 \
>> +    doc/windmc.1 \
>> +    doc/$(DEMANGLER_NAME).1
>> +
>> +info_TEXINFOS = doc/binutils.texi
>> +binutils_TEXI = $(srcdir)/doc/binutils.texi
>> +AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
>> +           -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
>> +           --no-split
>> +
>> +TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
>> +            -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>> +
>>   all: $(BUILT_SOURCES) config.h
>>       $(MAKE) $(AM_MAKEFLAGS) all-recursive
>>   .SUFFIXES:
>> -.SUFFIXES: .c .l .lo .o .obj .y
>> +.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
>>   am--refresh: Makefile
>>       @:
>> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  
>> $(am__configure_deps)
>> +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am 
>> $(srcdir)/doc/local.mk $(am__configure_deps)
>>       @for dep in $?; do \
>>         case '$(am__configure_deps)' in \
>>           *$$dep*) \
>> @@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in 
>> $(top_builddir)/config.status
>>           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ 
>> $(am__depfiles_maybe)'; \
>>           cd $(top_builddir) && $(SHELL) ./config.status $@ 
>> $(am__depfiles_maybe);; \
>>       esac;
>> +$(srcdir)/doc/local.mk $(am__empty):
>>   $(top_builddir)/config.status: $(top_srcdir)/configure 
>> $(CONFIG_STATUS_DEPENDENCIES)
>>       $(SHELL) ./config.status --recheck
>> @@ -1139,6 +1240,186 @@ clean-libtool:
>>   distclean-libtool:
>>       -rm -f libtool config.lt
>> +doc/$(am__dirstamp):
>> +    @$(MKDIR_P) doc
>> +    @: > doc/$(am__dirstamp)
>> +
>> +doc/binutils.info: doc/binutils.texi
>> +    @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) 
>> doc/$(am__dirstamp)
>> +    $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" 
>> && \
>> +    rm -rf $$backupdir && mkdir $$backupdir && \
>> +    if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
>> +      for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] 
>> $(@:.info=).i[0-9][0-9]; do \
>> +        if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; 
>> fi; \
>> +      done; \
>> +    else :; fi && \
>> +    if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I 
>> $(srcdir)/doc \
>> +     -o $@ `test -f 'doc/binutils.texi' || echo 
>> '$(srcdir)/'`doc/binutils.texi; \
>> +    then \
>> +      rc=0; \
>> +    else \
>> +      rc=$$?; \
>> +      $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
>> +    fi; \
>> +    rm -rf $$backupdir; exit $$rc
>> +
>> +doc/binutils.dvi: doc/binutils.texi  doc/$(am__dirstamp)
>> +    
>> $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> +    MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc 
>> -I $(srcdir)/doc' \
>> +    $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ 
>> $(AM_V_texidevnull) \
>> +    `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
>> +
>> +doc/binutils.pdf: doc/binutils.texi  doc/$(am__dirstamp)
>> +    
>> $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> +    MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc 
>> -I $(srcdir)/doc' \
>> +    $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ 
>> $(AM_V_texidevnull) \
>> +    `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
>> +
>> +doc/binutils.html: doc/binutils.texi  doc/$(am__dirstamp)
>> +    $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
>> +    $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) 
>> $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
>> +     -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo 
>> '$(srcdir)/'`doc/binutils.texi; \
>> +    then \
>> +      rm -rf $@ && mv $(@:.html=.htp) $@; \
>> +    else \
>> +      rm -rf $(@:.html=.htp); exit 1; \
>> +    fi
>> +.dvi.ps:
>> +    
>> $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> +    $(DVIPS) $(AM_V_texinfo) -o $@ $<
>> +
>> +uninstall-dvi-am:
>> +    @$(NORMAL_UNINSTALL)
>> +    @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> +    for p in $$list; do \
>> +      $(am__strip_dir) \
>> +      echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
>> +      rm -f "$(DESTDIR)$(dvidir)/$$f"; \
>> +    done
>> +
>> +uninstall-html-am:
>> +    @$(NORMAL_UNINSTALL)
>> +    @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
>> +    for p in $$list; do \
>> +      $(am__strip_dir) \
>> +      echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
>> +      rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
>> +    done
>> +
>> +uninstall-info-am:
>> +    @$(PRE_UNINSTALL)
>> +    @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); 
>> then \
>> +      list='$(INFO_DEPS)'; \
>> +      for file in $$list; do \
>> +        relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> +        echo " install-info --info-dir='$(DESTDIR)$(infodir)' 
>> --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
>> +        if install-info --info-dir="$(DESTDIR)$(infodir)" --remove 
>> "$(DESTDIR)$(infodir)/$$relfile"; \
>> +        then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || 
>> exit 1; fi; \
>> +      done; \
>> +    else :; fi
>> +    @$(NORMAL_UNINSTALL)
>> +    @list='$(INFO_DEPS)'; \
>> +    for file in $$list; do \
>> +      relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> +      relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
>> +      (if test -d "$(DESTDIR)$(infodir)" && cd 
>> "$(DESTDIR)$(infodir)"; then \
>> +         echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile 
>> $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] 
>> $$relfile_i[0-9][0-9]"; \
>> +         rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] 
>> $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
>> +       else :; fi); \
>> +    done
>> +
>> +uninstall-pdf-am:
>> +    @$(NORMAL_UNINSTALL)
>> +    @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> +    for p in $$list; do \
>> +      $(am__strip_dir) \
>> +      echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
>> +      rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
>> +    done
>> +
>> +uninstall-ps-am:
>> +    @$(NORMAL_UNINSTALL)
>> +    @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> +    for p in $$list; do \
>> +      $(am__strip_dir) \
>> +      echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
>> +      rm -f "$(DESTDIR)$(psdir)/$$f"; \
>> +    done
>> +
>> +dist-info: $(INFO_DEPS)
>> +    @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> +    list='$(INFO_DEPS)'; \
>> +    for base in $$list; do \
>> +      case $$base in \
>> +        $(srcdir)/*) base=`echo "$$base" | sed 
>> "s|^$$srcdirstrip/||"`;; \
>> +      esac; \
>> +      if test -f $$base; then d=.; else d=$(srcdir); fi; \
>> +      base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
>> +      for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] 
>> $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
>> +        if test -f $$file; then \
>> +          relfile=`expr "$$file" : "$$d/\(.*\)"`; \
>> +          test -f "$(distdir)/$$relfile" || \
>> +        cp -p $$file "$(distdir)/$$relfile"; \
>> +        else :; fi; \
>> +      done; \
>> +    done
>> +
>> +mostlyclean-aminfo:
>> +    -rm -rf doc/binutils.t2d doc/binutils.t2p
>> +
>> +clean-aminfo:
>> +    -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps 
>> doc/binutils.html" \
>> +    || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps 
>> doc/binutils.html
>> +
>> +maintainer-clean-aminfo:
>> +    @list='$(INFO_DEPS)'; for i in $$list; do \
>> +      i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
>> +      echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] 
>> $$i_i[0-9][0-9]"; \
>> +      rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
>> +    done
>> +install-man1: $(man_MANS)
>> +    @$(NORMAL_INSTALL)
>> +    @list1=''; \
>> +    list2='$(man_MANS)'; \
>> +    test -n "$(man1dir)" \
>> +      && test -n "`echo $$list1$$list2`" \
>> +      || exit 0; \
>> +    echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
>> +    $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
>> +    { for i in $$list1; do echo "$$i"; done;  \
>> +    if test -n "$$list2"; then \
>> +      for i in $$list2; do echo "$$i"; done \
>> +        | sed -n '/\.1[a-z]*$$/p'; \
>> +    fi; \
>> +    } | while read p; do \
>> +      if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
>> +      echo "$$d$$p"; echo "$$p"; \
>> +    done | \
>> +    sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> +          -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
>> +    sed 'N;N;s,\n, ,g' | { \
>> +    list=; while read file base inst; do \
>> +      if test "$$base" = "$$inst"; then list="$$list $$file"; else \
>> +        echo " $(INSTALL_DATA) '$$file' 
>> '$(DESTDIR)$(man1dir)/$$inst'"; \
>> +        $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || 
>> exit $$?; \
>> +      fi; \
>> +    done; \
>> +    for i in $$list; do echo "$$i"; done | $(am__base_list) | \
>> +    while read files; do \
>> +      test -z "$$files" || { \
>> +        echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
>> +        $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
>> +    done; }
>> +
>> +uninstall-man1:
>> +    @$(NORMAL_UNINSTALL)
>> +    @list=''; test -n "$(man1dir)" || exit 0; \
>> +    files=`{ for i in $$list; do echo "$$i"; done; \
>> +    l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
>> +      sed -n '/\.1[a-z]*$$/p'; \
>> +    } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> +          -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
>> +    dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>>   # This directory's subdirectories are mostly independent; you can cd
>>   # into them and run 'make' without going through this Makefile.
>> @@ -1281,10 +1562,10 @@ check-am: all-am
>>       $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
>>   check: $(BUILT_SOURCES)
>>       $(MAKE) $(AM_MAKEFLAGS) check-recursive
>> -all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
>> +all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
>>   installdirs: installdirs-recursive
>>   installdirs-am:
>> -    for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
>> +    for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" 
>> "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
>>         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
>>       done
>>   install: $(BUILT_SOURCES)
>> @@ -1315,6 +1596,7 @@ clean-generic:
>>   distclean-generic:
>>       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
>>       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" 
>> || rm -f $(CONFIG_CLEAN_VPATH_FILES)
>> +    -rm -f doc/$(am__dirstamp)
>>       -rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
>>       -rm -f testsuite/$(am__dirstamp)
>>       -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
>> @@ -1333,9 +1615,10 @@ maintainer-clean-generic:
>>       -rm -f rcparse.c
>>       -rm -f rcparse.h
>>       -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
>> +    -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
>>   clean: clean-recursive
>> -clean-am: clean-binPROGRAMS clean-generic clean-libtool \
>> +clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
>>       clean-noinstPROGRAMS mostlyclean-am
>>   distclean: distclean-recursive
>> @@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU 
>> distclean-compile \
>>   dvi: dvi-recursive
>> -dvi-am:
>> +dvi-am: $(DVIS)
>>   html: html-recursive
>> -html-am:
>> +html-am: $(HTMLS) html-local
>>   info: info-recursive
>> -info-am:
>> +info-am: $(INFO_DEPS) info-local
>> -install-data-am:
>> +install-data-am: install-info-am install-man
>>   install-dvi: install-dvi-recursive
>> -install-dvi-am:
>> -
>> +install-dvi-am: $(DVIS)
>> +    @$(NORMAL_INSTALL)
>> +    @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> +    if test -n "$$list"; then \
>> +      echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
>> +      $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
>> +    fi; \
>> +    for p in $$list; do \
>> +      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> +      echo "$$d$$p"; \
>> +    done | $(am__base_list) | \
>> +    while read files; do \
>> +      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
>> +      $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
>> +    done
>>   install-exec-am: install-binPROGRAMS install-binSCRIPTS \
>>       install-exec-local
>>   install-html: install-html-recursive
>> -install-html-am:
>> -
>> +install-html-am: $(HTMLS)
>> +    @$(NORMAL_INSTALL)
>> +    @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
>> +    if test -n "$$list"; then \
>> +      echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
>> +      $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
>> +    fi; \
>> +    for p in $$list; do \
>> +      if test -f "$$p" || test -d "$$p"; then d=; else 
>> d="$(srcdir)/"; fi; \
>> +      $(am__strip_dir) \
>> +      d2=$$d$$p; \
>> +      if test -d "$$d2"; then \
>> +        echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
>> +        $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
>> +        echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
>> +        $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit 
>> $$?; \
>> +      else \
>> +        list2="$$list2 $$d2"; \
>> +      fi; \
>> +    done; \
>> +    test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
>> +    while read files; do \
>> +      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
>> +      $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
>> +    done; }
>>   install-info: install-info-recursive
>> -install-info-am:
>> -
>> -install-man:
>> +install-info-am: $(INFO_DEPS)
>> +    @$(NORMAL_INSTALL)
>> +    @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> +    list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> +    if test -n "$$list"; then \
>> +      echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
>> +      $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
>> +    fi; \
>> +    for file in $$list; do \
>> +      case $$file in \
>> +        $(srcdir)/*) file=`echo "$$file" | sed 
>> "s|^$$srcdirstrip/||"`;; \
>> +      esac; \
>> +      if test -f $$file; then d=.; else d=$(srcdir); fi; \
>> +      file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
>> +      for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
>> +                   $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
>> +        if test -f $$ifile; then \
>> +          echo "$$ifile"; \
>> +        else : ; fi; \
>> +      done; \
>> +    done | $(am__base_list) | \
>> +    while read files; do \
>> +      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
>> +      $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
>> +    @$(POST_INSTALL)
>> +    @if $(am__can_run_installinfo); then \
>> +      list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> +      for file in $$list; do \
>> +        relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> +        echo " install-info --info-dir='$(DESTDIR)$(infodir)' 
>> '$(DESTDIR)$(infodir)/$$relfile'";\
>> +        install-info --info-dir="$(DESTDIR)$(infodir)" 
>> "$(DESTDIR)$(infodir)/$$relfile" || :;\
>> +      done; \
>> +    else : ; fi
>> +install-man: install-man1
>>   install-pdf: install-pdf-recursive
>> -install-pdf-am:
>> -
>> +install-pdf-am: $(PDFS)
>> +    @$(NORMAL_INSTALL)
>> +    @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> +    if test -n "$$list"; then \
>> +      echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
>> +      $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
>> +    fi; \
>> +    for p in $$list; do \
>> +      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> +      echo "$$d$$p"; \
>> +    done | $(am__base_list) | \
>> +    while read files; do \
>> +      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
>> +      $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
>>   install-ps: install-ps-recursive
>> -install-ps-am:
>> -
>> +install-ps-am: $(PSS)
>> +    @$(NORMAL_INSTALL)
>> +    @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> +    if test -n "$$list"; then \
>> +      echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
>> +      $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
>> +    fi; \
>> +    for p in $$list; do \
>> +      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> +      echo "$$d$$p"; \
>> +    done | $(am__base_list) | \
>> +    while read files; do \
>> +      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
>> +      $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
>>   installcheck-am: installcheck-local
>>   maintainer-clean: maintainer-clean-recursive
>> @@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
>>       -rm -rf $(top_srcdir)/autom4te.cache
>>       -rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
>>       -rm -f Makefile
>> -maintainer-clean-am: distclean-am maintainer-clean-generic
>> +maintainer-clean-am: distclean-am maintainer-clean-aminfo \
>> +    maintainer-clean-generic
>>   mostlyclean: mostlyclean-recursive
>> -mostlyclean-am: mostlyclean-compile mostlyclean-generic \
>> -    mostlyclean-libtool mostlyclean-local
>> +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
>> +    mostlyclean-generic mostlyclean-libtool mostlyclean-local
>>   pdf: pdf-recursive
>> -pdf-am:
>> +pdf-am: $(PDFS)
>>   ps: ps-recursive
>> -ps-am:
>> +ps-am: $(PSS)
>> +
>> +uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
>> +    uninstall-dvi-am uninstall-html-am uninstall-info-am \
>> +    uninstall-man uninstall-pdf-am uninstall-ps-am
>> -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
>> +uninstall-man: uninstall-man1
>>   .MAKE: $(am__recursive_targets) all check check-am install install-am \
>>       install-strip
>>   .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
>> -    am--refresh check check-DEJAGNU check-am clean \
>> +    am--refresh check check-DEJAGNU check-am clean clean-aminfo \
>>       clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
>>       clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
>> -    distclean distclean-DEJAGNU distclean-compile \
>> +    dist-info distclean distclean-DEJAGNU distclean-compile \
>>       distclean-generic distclean-hdr distclean-libtool \
>> -    distclean-tags dvi dvi-am html html-am info info-am install \
>> -    install-am install-binPROGRAMS install-binSCRIPTS install-data \
>> -    install-data-am install-dvi install-dvi-am install-exec \
>> -    install-exec-am install-exec-local install-html \
>> -    install-html-am install-info install-info-am install-man \
>> -    install-pdf install-pdf-am install-ps install-ps-am \
>> -    install-strip installcheck installcheck-am installcheck-local \
>> -    installdirs installdirs-am maintainer-clean \
>> -    maintainer-clean-generic mostlyclean mostlyclean-compile \
>> -    mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
>> -    pdf-am ps ps-am tags tags-am uninstall uninstall-am \
>> -    uninstall-binPROGRAMS uninstall-binSCRIPTS
>> +    distclean-tags dvi dvi-am html html-am html-local info info-am \
>> +    info-local install install-am install-binPROGRAMS \
>> +    install-binSCRIPTS install-data install-data-am install-dvi \
>> +    install-dvi-am install-exec install-exec-am install-exec-local \
>> +    install-html install-html-am install-info install-info-am \
>> +    install-man install-man1 install-pdf install-pdf-am install-ps \
>> +    install-ps-am install-strip installcheck installcheck-am \
>> +    installcheck-local installdirs installdirs-am maintainer-clean \
>> +    maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
>> +    mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
>> +    mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
>> +    tags-am uninstall uninstall-am uninstall-binPROGRAMS \
>> +    uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
>> +    uninstall-info-am uninstall-man uninstall-man1 \
>> +    uninstall-pdf-am uninstall-ps-am
>>   .PRECIOUS: Makefile
>> @@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS 
>> $(bin_PROGRAMS) $(noinst_PROGRAMS)
>>         fi; \
>>       done
>> +# Man page generation from texinfo
>> +doc/addr2line.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) 
>> > addr2line.pod
>> +    $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f addr2line.pod
>> +
>> +doc/ar.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>> +    $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ 
>> && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f ar.pod
>> +
>> +doc/dlltool.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > 
>> dlltool.pod
>> +    $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f dlltool.pod
>> +
>> +doc/nm.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>> +    $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ 
>> && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f nm.pod
>> +
>> +doc/objcopy.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > 
>> objcopy.pod
>> +    $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f objcopy.pod
>> +
>> +doc/objdump.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > 
>> objdump.pod
>> +    $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f objdump.pod
>> +
>> +doc/ranlib.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > 
>> ranlib.pod
>> +    $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f ranlib.pod
>> +
>> +doc/readelf.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > 
>> readelf.pod
>> +    $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f readelf.pod
>> +
>> +doc/size.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > 
>> size.pod
>> +    $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f size.pod
>> +
>> +doc/strings.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > 
>> strings.pod
>> +    $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f strings.pod
>> +
>> +doc/strip.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > 
>> strip.pod
>> +    $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f strip.pod
>> +
>> +doc/elfedit.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > 
>> elfedit.pod
>> +    $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f elfedit.pod
>> +
>> +doc/windres.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > 
>> windres.pod
>> +    $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f windres.pod
>> +
>> +doc/windmc.1:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > 
>> windmc.pod
>> +    $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f windmc.pod
>> +
>> +doc/cxxfilt.man:    $(binutils_TEXI)
>> +    $(AM_V_GEN)touch $@
>> +    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > 
>> $(DEMANGLER_NAME).pod
>> +    $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n 
>> .na/d' > $@.T$$$$ && \
>> +        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> +    $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> +
>> +doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
>> +    $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
>> +      man=doc/cxxfilt.man; \
>> +    else \
>> +      man=$(srcdir)/doc/cxxfilt.man; \
>> +    fi; \
>> +    sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>> +        -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> +        > doc/$(DEMANGLER_NAME).1
>> +
>> +html-local: doc/binutils/index.html
>> +binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
>> +    $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) 
>> $(MAKEINFOFLAGS) \
>> +      --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
>> +
>> +# Maintenance
>> +
>> +# We need it for the taz target in ../Makefile.in.
>> +info-local: $(MANS)
>> +
>>   # Tell versions [3.59,3.63) of GNU make to not export all variables.
>>   # Otherwise a system limit (for SysV at least) may be exceeded.
>>   .NOEXPORT:
>> diff --git a/binutils/configure.ac b/binutils/configure.ac
>> index b0677ba5f20e..62696ff2a225 100644
>> --- a/binutils/configure.ac
>> +++ b/binutils/configure.ac
>> @@ -535,7 +535,7 @@ AC_SUBST(docdir)
>>   AC_SUBST(htmldir)
>>   AC_SUBST(pdfdir)
>> -AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
>> +AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
>>   AC_OUTPUT
>>   GNU_MAKE_JOBSERVER
>> diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
>> deleted file mode 100644
>> index d42cdd87929b..000000000000
>> --- a/binutils/doc/Makefile.in
>> +++ /dev/null
>> @@ -1,1045 +0,0 @@
>> -# Makefile.in generated by automake 1.15.1 from Makefile.am.
>> -# @configure_input@
>> -
>> -# Copyright (C) 1994-2017 Free Software Foundation, Inc.
>> -
>> -# This Makefile.in is free software; the Free Software Foundation
>> -# gives unlimited permission to copy and/or distribute it,
>> -# with or without modifications, as long as this notice is preserved.
>> -
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
>> -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
>> -# PARTICULAR PURPOSE.
>> -
>> -@SET_MAKE@
>> -
>> -#
>> -#   Copyright (C) 2012-2021 Free Software Foundation, Inc.
>> -#
>> -# This file is free software; you can redistribute it and/or modify
>> -# it under the terms of the GNU General Public License as published by
>> -# the Free Software Foundation; either version 3 of the License, or
>> -# (at your option) any later version.
>> -#
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> -# GNU General Public License for more details.
>> -#
>> -# You should have received a copy of the GNU General Public License
>> -# along with this program; see the file COPYING3.  If not see
>> -# <http://www.gnu.org/licenses/>.
>> -#
>> -VPATH = @srcdir@
>> -am__is_gnu_make = { \
>> -  if test -z '$(MAKELEVEL)'; then \
>> -    false; \
>> -  elif test -n '$(MAKE_HOST)'; then \
>> -    true; \
>> -  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
>> -    true; \
>> -  else \
>> -    false; \
>> -  fi; \
>> -}
>> -am__make_running_with_option = \
>> -  case $${target_option-} in \
>> -      ?) ;; \
>> -      *) echo "am__make_running_with_option: internal error: invalid" \
>> -              "target option '$${target_option-}' specified" >&2; \
>> -         exit 1;; \
>> -  esac; \
>> -  has_opt=no; \
>> -  sane_makeflags=$$MAKEFLAGS; \
>> -  if $(am__is_gnu_make); then \
>> -    sane_makeflags=$$MFLAGS; \
>> -  else \
>> -    case $$MAKEFLAGS in \
>> -      *\\[\ \    ]*) \
>> -        bs=\\; \
>> -        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
>> -          | sed "s/$$bs$$bs[$$bs $$bs    ]*//g"`;; \
>> -    esac; \
>> -  fi; \
>> -  skip_next=no; \
>> -  strip_trailopt () \
>> -  { \
>> -    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
>> -  }; \
>> -  for flg in $$sane_makeflags; do \
>> -    test $$skip_next = yes && { skip_next=no; continue; }; \
>> -    case $$flg in \
>> -      *=*|--*) continue;; \
>> -        -*I) strip_trailopt 'I'; skip_next=yes;; \
>> -      -*I?*) strip_trailopt 'I';; \
>> -        -*O) strip_trailopt 'O'; skip_next=yes;; \
>> -      -*O?*) strip_trailopt 'O';; \
>> -        -*l) strip_trailopt 'l'; skip_next=yes;; \
>> -      -*l?*) strip_trailopt 'l';; \
>> -      -[dEDm]) skip_next=yes;; \
>> -      -[JT]) skip_next=yes;; \
>> -    esac; \
>> -    case $$flg in \
>> -      *$$target_option*) has_opt=yes; break;; \
>> -    esac; \
>> -  done; \
>> -  test $$has_opt = yes
>> -am__make_dryrun = (target_option=n; $(am__make_running_with_option))
>> -am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
>> -pkgdatadir = $(datadir)/@PACKAGE@
>> -pkgincludedir = $(includedir)/@PACKAGE@
>> -pkglibdir = $(libdir)/@PACKAGE@
>> -pkglibexecdir = $(libexecdir)/@PACKAGE@
>> -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
>> -install_sh_DATA = $(install_sh) -c -m 644
>> -install_sh_PROGRAM = $(install_sh) -c
>> -install_sh_SCRIPT = $(install_sh) -c
>> -INSTALL_HEADER = $(INSTALL_DATA)
>> -transform = $(program_transform_name)
>> -NORMAL_INSTALL = :
>> -PRE_INSTALL = :
>> -POST_INSTALL = :
>> -NORMAL_UNINSTALL = :
>> -PRE_UNINSTALL = :
>> -POST_UNINSTALL = :
>> -build_triplet = @build@
>> -host_triplet = @host@
>> -target_triplet = @target@
>> -subdir = doc
>> -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
>> -am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
>> -    $(top_srcdir)/../bfd/warning.m4 \
>> -    $(top_srcdir)/../config/depstand.m4 \
>> -    $(top_srcdir)/../config/enable.m4 \
>> -    $(top_srcdir)/../config/gettext-sister.m4 \
>> -    $(top_srcdir)/../config/iconv.m4 \
>> -    $(top_srcdir)/../config/jobserver.m4 \
>> -    $(top_srcdir)/../config/largefile.m4 \
>> -    $(top_srcdir)/../config/lcmessage.m4 \
>> -    $(top_srcdir)/../config/lead-dot.m4 \
>> -    $(top_srcdir)/../config/lib-ld.m4 \
>> -    $(top_srcdir)/../config/lib-link.m4 \
>> -    $(top_srcdir)/../config/lib-prefix.m4 \
>> -    $(top_srcdir)/../config/nls.m4 \
>> -    $(top_srcdir)/../config/override.m4 \
>> -    $(top_srcdir)/../config/pkg.m4 \
>> -    $(top_srcdir)/../config/plugins.m4 \
>> -    $(top_srcdir)/../config/po.m4 \
>> -    $(top_srcdir)/../config/progtest.m4 \
>> -    $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
>> -    $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
>> -    $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
>> -    $(top_srcdir)/../bfd/version.m4 \
>> -    $(top_srcdir)/../config/debuginfod.m4 \
>> -    $(top_srcdir)/configure.ac
>> -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
>> -    $(ACLOCAL_M4)
>> -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
>> -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
>> -CONFIG_HEADER = $(top_builddir)/config.h
>> -CONFIG_CLEAN_FILES =
>> -CONFIG_CLEAN_VPATH_FILES =
>> -AM_V_P = $(am__v_P_@AM_V@)
>> -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
>> -am__v_P_0 = false
>> -am__v_P_1 = :
>> -AM_V_GEN = $(am__v_GEN_@AM_V@)
>> -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
>> -am__v_GEN_0 = @echo "  GEN     " $@;
>> -am__v_GEN_1 =
>> -AM_V_at = $(am__v_at_@AM_V@)
>> -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
>> -am__v_at_0 = @
>> -am__v_at_1 =
>> -SOURCES =
>> -DIST_SOURCES =
>> -AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
>> -am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
>> -am__v_DVIPS_0 = @echo "  DVIPS   " $@;
>> -am__v_DVIPS_1 =
>> -AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
>> -am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
>> -am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
>> -am__v_MAKEINFO_1 =
>> -AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
>> -am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
>> -am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
>> -am__v_INFOHTML_1 =
>> -AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
>> -am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
>> -am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
>> -am__v_TEXI2DVI_1 =
>> -AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
>> -am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
>> -am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
>> -am__v_TEXI2PDF_1 =
>> -AM_V_texinfo = $(am__v_texinfo_@AM_V@)
>> -am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
>> -am__v_texinfo_0 = -q
>> -am__v_texinfo_1 =
>> -AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
>> -am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
>> -am__v_texidevnull_0 = > /dev/null
>> -am__v_texidevnull_1 =
>> -INFO_DEPS = binutils.info
>> -am__TEXINFO_TEX_DIR = $(srcdir)
>> -DVIS = binutils.dvi
>> -PDFS = binutils.pdf
>> -PSS = binutils.ps
>> -HTMLS = binutils.html
>> -TEXINFOS = binutils.texi
>> -TEXI2PDF = $(TEXI2DVI) --pdf --batch
>> -MAKEINFOHTML = $(MAKEINFO) --html
>> -AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
>> -DVIPS = dvips
>> -am__can_run_installinfo = \
>> -  case $$AM_UPDATE_INFO_DIR in \
>> -    n|no|NO) false;; \
>> -    *) (install-info --version) >/dev/null 2>&1;; \
>> -  esac
>> -am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
>> -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
>> -am__vpath_adj = case $$p in \
>> -    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
>> -    *) f=$$p;; \
>> -  esac;
>> -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
>> -am__install_max = 40
>> -am__nobase_strip_setup = \
>> -  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
>> -am__nobase_strip = \
>> -  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
>> -am__nobase_list = $(am__nobase_strip_setup); \
>> -  for p in $$list; do echo "$$p $$p"; done | \
>> -  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( 
>> .*\)/[^/]*$$,\1,' | \
>> -  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
>> -    if (++n[$$2] == $(am__install_max)) \
>> -      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
>> -    END { for (dir in files) print dir, files[dir] }'
>> -am__base_list = \
>> -  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
>> -  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
>> -am__uninstall_files_from_dir = { \
>> -  test -z "$$files" \
>> -    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; 
>> } \
>> -    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
>> -         $(am__cd) "$$dir" && rm -f $$files; }; \
>> -  }
>> -man1dir = $(mandir)/man1
>> -NROFF = nroff
>> -MANS = $(man_MANS)
>> -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
>> -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
>> -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
>> -ACLOCAL = @ACLOCAL@
>> -AMTAR = @AMTAR@
>> -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
>> -AR = @AR@
>> -AUTOCONF = @AUTOCONF@
>> -AUTOHEADER = @AUTOHEADER@
>> -AUTOMAKE = @AUTOMAKE@
>> -AWK = @AWK@
>> -BUILD_DLLTOOL = @BUILD_DLLTOOL@
>> -BUILD_DLLWRAP = @BUILD_DLLWRAP@
>> -BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
>> -BUILD_MISC = @BUILD_MISC@
>> -BUILD_SRCONV = @BUILD_SRCONV@
>> -BUILD_WINDMC = @BUILD_WINDMC@
>> -BUILD_WINDRES = @BUILD_WINDRES@
>> -CATALOGS = @CATALOGS@
>> -CATOBJEXT = @CATOBJEXT@
>> -CC = @CC@
>> -CCDEPMODE = @CCDEPMODE@
>> -CC_FOR_BUILD = @CC_FOR_BUILD@
>> -CFLAGS = @CFLAGS@
>> -CPP = @CPP@
>> -CPPFLAGS = @CPPFLAGS@
>> -CYGPATH_W = @CYGPATH_W@
>> -DATADIRNAME = @DATADIRNAME@
>> -DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
>> -DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
>> -DEFS = @DEFS@
>> -DEMANGLER_NAME = @DEMANGLER_NAME@
>> -DEPDIR = @DEPDIR@
>> -DLLTOOL_DEFS = @DLLTOOL_DEFS@
>> -DSYMUTIL = @DSYMUTIL@
>> -DUMPBIN = @DUMPBIN@
>> -ECHO_C = @ECHO_C@
>> -ECHO_N = @ECHO_N@
>> -ECHO_T = @ECHO_T@
>> -EGREP = @EGREP@
>> -EMULATION = @EMULATION@
>> -EMULATION_VECTOR = @EMULATION_VECTOR@
>> -EXEEXT = @EXEEXT@
>> -EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
>> -FGREP = @FGREP@
>> -GENCAT = @GENCAT@
>> -GMSGFMT = @GMSGFMT@
>> -GREP = @GREP@
>> -HDEFINES = @HDEFINES@
>> -INCINTL = @INCINTL@
>> -INSTALL = @INSTALL@
>> -INSTALL_DATA = @INSTALL_DATA@
>> -INSTALL_PROGRAM = @INSTALL_PROGRAM@
>> -INSTALL_SCRIPT = @INSTALL_SCRIPT@
>> -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
>> -INSTOBJEXT = @INSTOBJEXT@
>> -LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
>> -LD = @LD@
>> -LDFLAGS = @LDFLAGS@
>> -LEX = @LEX@
>> -LEXLIB = @LEXLIB@
>> -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
>> -LIBICONV = @LIBICONV@
>> -LIBINTL = @LIBINTL@
>> -LIBINTL_DEP = @LIBINTL_DEP@
>> -LIBOBJS = @LIBOBJS@
>> -LIBS = @LIBS@
>> -LIBTOOL = @LIBTOOL@
>> -LIPO = @LIPO@
>> -LN_S = @LN_S@
>> -LTLIBICONV = @LTLIBICONV@
>> -LTLIBOBJS = @LTLIBOBJS@
>> -MAINT = @MAINT@
>> -MAKEINFO = @MAKEINFO@
>> -MKDIR_P = @MKDIR_P@
>> -MKINSTALLDIRS = @MKINSTALLDIRS@
>> -MSGFMT = @MSGFMT@
>> -MSGMERGE = @MSGMERGE@
>> -NM = @NM@
>> -NMEDIT = @NMEDIT@
>> -NO_WERROR = @NO_WERROR@
>> -OBJDUMP = @OBJDUMP@
>> -OBJDUMP_DEFS = @OBJDUMP_DEFS@
>> -OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
>> -OBJEXT = @OBJEXT@
>> -OTOOL = @OTOOL@
>> -OTOOL64 = @OTOOL64@
>> -PACKAGE = @PACKAGE@
>> -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
>> -PACKAGE_NAME = @PACKAGE_NAME@
>> -PACKAGE_STRING = @PACKAGE_STRING@
>> -PACKAGE_TARNAME = @PACKAGE_TARNAME@
>> -PACKAGE_URL = @PACKAGE_URL@
>> -PACKAGE_VERSION = @PACKAGE_VERSION@
>> -PATH_SEPARATOR = @PATH_SEPARATOR@
>> -PKG_CONFIG = @PKG_CONFIG@
>> -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
>> -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
>> -POSUB = @POSUB@
>> -RANLIB = @RANLIB@
>> -SED = @SED@
>> -SET_MAKE = @SET_MAKE@
>> -SHELL = @SHELL@
>> -STRIP = @STRIP@
>> -USE_NLS = @USE_NLS@
>> -VERSION = @VERSION@
>> -WARN_CFLAGS = @WARN_CFLAGS@
>> -WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
>> -WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
>> -XGETTEXT = @XGETTEXT@
>> -YACC = @YACC@
>> -YFLAGS = @YFLAGS@
>> -abs_builddir = @abs_builddir@
>> -abs_srcdir = @abs_srcdir@
>> -abs_top_builddir = @abs_top_builddir@
>> -abs_top_srcdir = @abs_top_srcdir@
>> -ac_ct_CC = @ac_ct_CC@
>> -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
>> -am__include = @am__include@
>> -am__leading_dot = @am__leading_dot@
>> -am__quote = @am__quote@
>> -am__tar = @am__tar@
>> -am__untar = @am__untar@
>> -bindir = @bindir@
>> -build = @build@
>> -build_alias = @build_alias@
>> -build_cpu = @build_cpu@
>> -build_os = @build_os@
>> -build_vendor = @build_vendor@
>> -builddir = @builddir@
>> -datadir = @datadir@
>> -datarootdir = @datarootdir@
>> -docdir = @docdir@
>> -dvidir = @dvidir@
>> -exec_prefix = @exec_prefix@
>> -host = @host@
>> -host_alias = @host_alias@
>> -host_cpu = @host_cpu@
>> -host_os = @host_os@
>> -host_vendor = @host_vendor@
>> -htmldir = @htmldir@
>> -includedir = @includedir@
>> -infodir = @infodir@
>> -install_sh = @install_sh@
>> -libdir = @libdir@
>> -libexecdir = @libexecdir@
>> -localedir = @localedir@
>> -localstatedir = @localstatedir@
>> -mandir = @mandir@
>> -mkdir_p = @mkdir_p@
>> -oldincludedir = @oldincludedir@
>> -pdfdir = @pdfdir@
>> -prefix = @prefix@
>> -program_transform_name = @program_transform_name@
>> -psdir = @psdir@
>> -sbindir = @sbindir@
>> -sharedstatedir = @sharedstatedir@
>> -srcdir = @srcdir@
>> -sysconfdir = @sysconfdir@
>> -target = @target@
>> -target_alias = @target_alias@
>> -target_cpu = @target_cpu@
>> -target_os = @target_os@
>> -target_vendor = @target_vendor@
>> -top_build_prefix = @top_build_prefix@
>> -top_builddir = @top_builddir@
>> -top_srcdir = @top_srcdir@
>> -zlibdir = @zlibdir@
>> -zlibinc = @zlibinc@
>> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
>> -
>> -# What version of the manual you want; "all" includes everything
>> -CONFIG = all
>> -
>> -# Options to extract the man page from as.texinfo
>> -MANCONF = -Dman
>> -TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
>> -POD2MAN = pod2man --center="GNU Development Tools" \
>> -     --release="binutils-$(VERSION)" --section=1
>> -
>> -
>> -# List of man pages generated from binutils.texi
>> -man_MANS = \
>> -    addr2line.1 \
>> -    ar.1 \
>> -    dlltool.1 \
>> -    nm.1 \
>> -    objcopy.1 \
>> -    objdump.1 \
>> -    ranlib.1 \
>> -    readelf.1 \
>> -    size.1 \
>> -    strings.1 \
>> -    strip.1 \
>> -    elfedit.1 \
>> -    windres.1 \
>> -    windmc.1 \
>> -    $(DEMANGLER_NAME).1
>> -
>> -info_TEXINFOS = binutils.texi
>> -binutils_TEXI = $(srcdir)/binutils.texi
>> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> -           -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
>> -           --no-split
>> -
>> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> -            -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
>> -
>> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
>> -all: all-am
>> -
>> -.SUFFIXES:
>> -.SUFFIXES: .dvi .ps
>> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  
>> $(am__configure_deps)
>> -    @for dep in $?; do \
>> -      case '$(am__configure_deps)' in \
>> -        *$$dep*) \
>> -          ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 
>> ) \
>> -            && { if test -f $@; then exit 0; else break; fi; }; \
>> -          exit 1;; \
>> -      esac; \
>> -    done; \
>> -    echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
>> -    $(am__cd) $(top_srcdir) && \
>> -      $(AUTOMAKE) --foreign doc/Makefile
>> -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
>> -    @case '$?' in \
>> -      *config.status*) \
>> -        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
>> -      *) \
>> -        echo ' cd $(top_builddir) && $(SHELL) ./config.status 
>> $(subdir)/$@ $(am__depfiles_maybe)'; \
>> -        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 
>> $(am__depfiles_maybe);; \
>> -    esac;
>> -
>> -$(top_builddir)/config.status: $(top_srcdir)/configure 
>> $(CONFIG_STATUS_DEPENDENCIES)
>> -    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -
>> -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
>> -    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
>> -    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -$(am__aclocal_m4_deps):
>> -
>> -mostlyclean-libtool:
>> -    -rm -f *.lo
>> -
>> -clean-libtool:
>> -    -rm -rf .libs _libs
>> -
>> -binutils.info: binutils.texi
>> -    $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" 
>> && \
>> -    rm -rf $$backupdir && mkdir $$backupdir && \
>> -    if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
>> -      for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] 
>> $(@:.info=).i[0-9][0-9]; do \
>> -        if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; 
>> fi; \
>> -      done; \
>> -    else :; fi && \
>> -    if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
>> -     -o $@ `test -f 'binutils.texi' || echo 
>> '$(srcdir)/'`binutils.texi; \
>> -    then \
>> -      rc=0; \
>> -    else \
>> -      rc=$$?; \
>> -      $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
>> -    fi; \
>> -    rm -rf $$backupdir; exit $$rc
>> -
>> -binutils.dvi: binutils.texi
>> -    
>> $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> -    MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I 
>> $(srcdir)' \
>> -    $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ 
>> $(AM_V_texidevnull) \
>> -    `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
>> -
>> -binutils.pdf: binutils.texi
>> -    
>> $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> -    MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I 
>> $(srcdir)' \
>> -    $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ 
>> $(AM_V_texidevnull) \
>> -    `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
>> -
>> -binutils.html: binutils.texi
>> -    $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
>> -    $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) 
>> $(MAKEINFOFLAGS) -I $(srcdir) \
>> -     -o $(@:.html=.htp) `test -f 'binutils.texi' || echo 
>> '$(srcdir)/'`binutils.texi; \
>> -    then \
>> -      rm -rf $@ && mv $(@:.html=.htp) $@; \
>> -    else \
>> -      rm -rf $(@:.html=.htp); exit 1; \
>> -    fi
>> -.dvi.ps:
>> -    
>> $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" 
>> \
>> -    $(DVIPS) $(AM_V_texinfo) -o $@ $<
>> -
>> -uninstall-dvi-am:
>> -    @$(NORMAL_UNINSTALL)
>> -    @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> -    for p in $$list; do \
>> -      $(am__strip_dir) \
>> -      echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
>> -      rm -f "$(DESTDIR)$(dvidir)/$$f"; \
>> -    done
>> -
>> -uninstall-html-am:
>> -    @$(NORMAL_UNINSTALL)
>> -    @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
>> -    for p in $$list; do \
>> -      $(am__strip_dir) \
>> -      echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
>> -      rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
>> -    done
>> -
>> -uninstall-info-am:
>> -    @$(PRE_UNINSTALL)
>> -    @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); 
>> then \
>> -      list='$(INFO_DEPS)'; \
>> -      for file in $$list; do \
>> -        relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> -        echo " install-info --info-dir='$(DESTDIR)$(infodir)' 
>> --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
>> -        if install-info --info-dir="$(DESTDIR)$(infodir)" --remove 
>> "$(DESTDIR)$(infodir)/$$relfile"; \
>> -        then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || 
>> exit 1; fi; \
>> -      done; \
>> -    else :; fi
>> -    @$(NORMAL_UNINSTALL)
>> -    @list='$(INFO_DEPS)'; \
>> -    for file in $$list; do \
>> -      relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> -      relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
>> -      (if test -d "$(DESTDIR)$(infodir)" && cd 
>> "$(DESTDIR)$(infodir)"; then \
>> -         echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile 
>> $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] 
>> $$relfile_i[0-9][0-9]"; \
>> -         rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] 
>> $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
>> -       else :; fi); \
>> -    done
>> -
>> -uninstall-pdf-am:
>> -    @$(NORMAL_UNINSTALL)
>> -    @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> -    for p in $$list; do \
>> -      $(am__strip_dir) \
>> -      echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
>> -      rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
>> -    done
>> -
>> -uninstall-ps-am:
>> -    @$(NORMAL_UNINSTALL)
>> -    @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> -    for p in $$list; do \
>> -      $(am__strip_dir) \
>> -      echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
>> -      rm -f "$(DESTDIR)$(psdir)/$$f"; \
>> -    done
>> -
>> -dist-info: $(INFO_DEPS)
>> -    @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> -    list='$(INFO_DEPS)'; \
>> -    for base in $$list; do \
>> -      case $$base in \
>> -        $(srcdir)/*) base=`echo "$$base" | sed 
>> "s|^$$srcdirstrip/||"`;; \
>> -      esac; \
>> -      if test -f $$base; then d=.; else d=$(srcdir); fi; \
>> -      base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
>> -      for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] 
>> $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
>> -        if test -f $$file; then \
>> -          relfile=`expr "$$file" : "$$d/\(.*\)"`; \
>> -          test -f "$(distdir)/$$relfile" || \
>> -        cp -p $$file "$(distdir)/$$relfile"; \
>> -        else :; fi; \
>> -      done; \
>> -    done
>> -
>> -mostlyclean-aminfo:
>> -    -rm -rf binutils.t2d binutils.t2p
>> -
>> -clean-aminfo:
>> -    -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
>> -    || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
>> -
>> -maintainer-clean-aminfo:
>> -    @list='$(INFO_DEPS)'; for i in $$list; do \
>> -      i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
>> -      echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] 
>> $$i_i[0-9][0-9]"; \
>> -      rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
>> -    done
>> -install-man1: $(man_MANS)
>> -    @$(NORMAL_INSTALL)
>> -    @list1=''; \
>> -    list2='$(man_MANS)'; \
>> -    test -n "$(man1dir)" \
>> -      && test -n "`echo $$list1$$list2`" \
>> -      || exit 0; \
>> -    echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
>> -    $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
>> -    { for i in $$list1; do echo "$$i"; done;  \
>> -    if test -n "$$list2"; then \
>> -      for i in $$list2; do echo "$$i"; done \
>> -        | sed -n '/\.1[a-z]*$$/p'; \
>> -    fi; \
>> -    } | while read p; do \
>> -      if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
>> -      echo "$$d$$p"; echo "$$p"; \
>> -    done | \
>> -    sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> -          -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
>> -    sed 'N;N;s,\n, ,g' | { \
>> -    list=; while read file base inst; do \
>> -      if test "$$base" = "$$inst"; then list="$$list $$file"; else \
>> -        echo " $(INSTALL_DATA) '$$file' 
>> '$(DESTDIR)$(man1dir)/$$inst'"; \
>> -        $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || 
>> exit $$?; \
>> -      fi; \
>> -    done; \
>> -    for i in $$list; do echo "$$i"; done | $(am__base_list) | \
>> -    while read files; do \
>> -      test -z "$$files" || { \
>> -        echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
>> -        $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
>> -    done; }
>> -
>> -uninstall-man1:
>> -    @$(NORMAL_UNINSTALL)
>> -    @list=''; test -n "$(man1dir)" || exit 0; \
>> -    files=`{ for i in $$list; do echo "$$i"; done; \
>> -    l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
>> -      sed -n '/\.1[a-z]*$$/p'; \
>> -    } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> -          -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
>> -    dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>> -tags TAGS:
>> -
>> -ctags CTAGS:
>> -
>> -cscope cscopelist:
>> -
>> -
>> -distdir: $(DISTFILES)
>> -    @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
>> -    topsrcdirstrip=`echo "$(top_srcdir)" | sed 
>> 's/[].[^$$\\*]/\\\\&/g'`; \
>> -    list='$(DISTFILES)'; \
>> -      dist_files=`for file in $$list; do echo $$file; done | \
>> -      sed -e "s|^$$srcdirstrip/||;t" \
>> -          -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
>> -    case $$dist_files in \
>> -      */*) $(MKDIR_P) `echo "$$dist_files" | \
>> -               sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
>> -               sort -u` ;; \
>> -    esac; \
>> -    for file in $$dist_files; do \
>> -      if test -f $$file || test -d $$file; then d=.; else 
>> d=$(srcdir); fi; \
>> -      if test -d $$d/$$file; then \
>> -        dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
>> -        if test -d "$(distdir)/$$file"; then \
>> -          find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod 
>> u+rwx {} \;; \
>> -        fi; \
>> -        if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
>> -          cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
>> -          find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod 
>> u+rwx {} \;; \
>> -        fi; \
>> -        cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
>> -      else \
>> -        test -f "$(distdir)/$$file" \
>> -        || cp -p $$d/$$file "$(distdir)/$$file" \
>> -        || exit 1; \
>> -      fi; \
>> -    done
>> -    $(MAKE) $(AM_MAKEFLAGS) \
>> -      top_distdir="$(top_distdir)" distdir="$(distdir)" \
>> -      dist-info
>> -check-am: all-am
>> -check: check-am
>> -all-am: Makefile $(INFO_DEPS) $(MANS)
>> -installdirs:
>> -    for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
>> -      test -z "$$dir" || $(MKDIR_P) "$$dir"; \
>> -    done
>> -install: install-am
>> -install-exec: install-exec-am
>> -install-data: install-data-am
>> -uninstall: uninstall-am
>> -
>> -install-am: all-am
>> -    @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
>> -
>> -installcheck: installcheck-am
>> -install-strip:
>> -    if test -z '$(STRIP)'; then \
>> -      $(MAKE) $(AM_MAKEFLAGS) 
>> INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
>> -        install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" 
>> INSTALL_STRIP_FLAG=-s \
>> -          install; \
>> -    else \
>> -      $(MAKE) $(AM_MAKEFLAGS) 
>> INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
>> -        install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" 
>> INSTALL_STRIP_FLAG=-s \
>> -        "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
>> -    fi
>> -mostlyclean-generic:
>> -
>> -clean-generic:
>> -
>> -distclean-generic:
>> -    -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
>> -    -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || 
>> rm -f $(CONFIG_CLEAN_VPATH_FILES)
>> -
>> -maintainer-clean-generic:
>> -    @echo "This command is intended for maintainers to use"
>> -    @echo "it deletes files that may require special tools to rebuild."
>> -    -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
>> -clean: clean-am
>> -
>> -clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
>> -
>> -distclean: distclean-am
>> -    -rm -f Makefile
>> -distclean-am: clean-am distclean-generic
>> -
>> -dvi: dvi-am
>> -
>> -dvi-am: $(DVIS)
>> -
>> -html: html-am
>> -
>> -html-am: $(HTMLS) html-local
>> -
>> -info: info-am
>> -
>> -info-am: $(INFO_DEPS) info-local
>> -
>> -install-data-am: install-info-am install-man
>> -
>> -install-dvi: install-dvi-am
>> -
>> -install-dvi-am: $(DVIS)
>> -    @$(NORMAL_INSTALL)
>> -    @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> -    if test -n "$$list"; then \
>> -      echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
>> -      $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
>> -    fi; \
>> -    for p in $$list; do \
>> -      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> -      echo "$$d$$p"; \
>> -    done | $(am__base_list) | \
>> -    while read files; do \
>> -      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
>> -      $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
>> -    done
>> -install-exec-am:
>> -
>> -install-html: install-html-am
>> -
>> -install-html-am: $(HTMLS)
>> -    @$(NORMAL_INSTALL)
>> -    @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
>> -    if test -n "$$list"; then \
>> -      echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
>> -      $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
>> -    fi; \
>> -    for p in $$list; do \
>> -      if test -f "$$p" || test -d "$$p"; then d=; else 
>> d="$(srcdir)/"; fi; \
>> -      $(am__strip_dir) \
>> -      d2=$$d$$p; \
>> -      if test -d "$$d2"; then \
>> -        echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
>> -        $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
>> -        echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
>> -        $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit 
>> $$?; \
>> -      else \
>> -        list2="$$list2 $$d2"; \
>> -      fi; \
>> -    done; \
>> -    test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
>> -    while read files; do \
>> -      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
>> -      $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
>> -    done; }
>> -install-info: install-info-am
>> -
>> -install-info-am: $(INFO_DEPS)
>> -    @$(NORMAL_INSTALL)
>> -    @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> -    list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> -    if test -n "$$list"; then \
>> -      echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
>> -      $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
>> -    fi; \
>> -    for file in $$list; do \
>> -      case $$file in \
>> -        $(srcdir)/*) file=`echo "$$file" | sed 
>> "s|^$$srcdirstrip/||"`;; \
>> -      esac; \
>> -      if test -f $$file; then d=.; else d=$(srcdir); fi; \
>> -      file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
>> -      for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
>> -                   $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
>> -        if test -f $$ifile; then \
>> -          echo "$$ifile"; \
>> -        else : ; fi; \
>> -      done; \
>> -    done | $(am__base_list) | \
>> -    while read files; do \
>> -      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
>> -      $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
>> -    @$(POST_INSTALL)
>> -    @if $(am__can_run_installinfo); then \
>> -      list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> -      for file in $$list; do \
>> -        relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> -        echo " install-info --info-dir='$(DESTDIR)$(infodir)' 
>> '$(DESTDIR)$(infodir)/$$relfile'";\
>> -        install-info --info-dir="$(DESTDIR)$(infodir)" 
>> "$(DESTDIR)$(infodir)/$$relfile" || :;\
>> -      done; \
>> -    else : ; fi
>> -install-man: install-man1
>> -
>> -install-pdf: install-pdf-am
>> -
>> -install-pdf-am: $(PDFS)
>> -    @$(NORMAL_INSTALL)
>> -    @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> -    if test -n "$$list"; then \
>> -      echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
>> -      $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
>> -    fi; \
>> -    for p in $$list; do \
>> -      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> -      echo "$$d$$p"; \
>> -    done | $(am__base_list) | \
>> -    while read files; do \
>> -      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
>> -      $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
>> -install-ps: install-ps-am
>> -
>> -install-ps-am: $(PSS)
>> -    @$(NORMAL_INSTALL)
>> -    @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> -    if test -n "$$list"; then \
>> -      echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
>> -      $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
>> -    fi; \
>> -    for p in $$list; do \
>> -      if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> -      echo "$$d$$p"; \
>> -    done | $(am__base_list) | \
>> -    while read files; do \
>> -      echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
>> -      $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
>> -installcheck-am:
>> -
>> -maintainer-clean: maintainer-clean-am
>> -    -rm -f Makefile
>> -maintainer-clean-am: distclean-am maintainer-clean-aminfo \
>> -    maintainer-clean-generic
>> -
>> -mostlyclean: mostlyclean-am
>> -
>> -mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
>> -    mostlyclean-libtool
>> -
>> -pdf: pdf-am
>> -
>> -pdf-am: $(PDFS)
>> -
>> -ps: ps-am
>> -
>> -ps-am: $(PSS)
>> -
>> -uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
>> -    uninstall-man uninstall-pdf-am uninstall-ps-am
>> -
>> -uninstall-man: uninstall-man1
>> -
>> -.MAKE: install-am install-strip
>> -
>> -.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
>> -    clean-libtool cscopelist-am ctags-am dist-info distclean \
>> -    distclean-generic distclean-libtool distdir dvi dvi-am html \
>> -    html-am html-local info info-am info-local install install-am \
>> -    install-data install-data-am install-dvi install-dvi-am \
>> -    install-exec install-exec-am install-html install-html-am \
>> -    install-info install-info-am install-man install-man1 \
>> -    install-pdf install-pdf-am install-ps install-ps-am \
>> -    install-strip installcheck installcheck-am installdirs \
>> -    maintainer-clean maintainer-clean-aminfo \
>> -    maintainer-clean-generic mostlyclean mostlyclean-aminfo \
>> -    mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
>> -    tags-am uninstall uninstall-am uninstall-dvi-am \
>> -    uninstall-html-am uninstall-info-am uninstall-man \
>> -    uninstall-man1 uninstall-pdf-am uninstall-ps-am
>> -
>> -.PRECIOUS: Makefile
>> -
>> -
>> -# Man page generation from texinfo
>> -addr2line.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) 
>> > addr2line.pod
>> -    $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f addr2line.pod
>> -
>> -ar.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>> -    $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ 
>> && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f ar.pod
>> -
>> -dlltool.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > 
>> dlltool.pod
>> -    $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f dlltool.pod
>> -
>> -nm.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>> -    $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ 
>> && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f nm.pod
>> -
>> -objcopy.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > 
>> objcopy.pod
>> -    $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f objcopy.pod
>> -
>> -objdump.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > 
>> objdump.pod
>> -    $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f objdump.pod
>> -
>> -ranlib.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > 
>> ranlib.pod
>> -    $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f ranlib.pod
>> -
>> -readelf.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > 
>> readelf.pod
>> -    $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f readelf.pod
>> -
>> -size.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > 
>> size.pod
>> -    $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f size.pod
>> -
>> -strings.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > 
>> strings.pod
>> -    $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f strings.pod
>> -
>> -strip.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > 
>> strip.pod
>> -    $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f strip.pod
>> -
>> -elfedit.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > 
>> elfedit.pod
>> -    $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f elfedit.pod
>> -
>> -windres.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > 
>> windres.pod
>> -    $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f windres.pod
>> -
>> -windmc.1:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > 
>> windmc.pod
>> -    $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f windmc.pod
>> -
>> -cxxfilt.man:    $(binutils_TEXI)
>> -    $(AM_V_GEN)touch $@
>> -    $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > 
>> $(DEMANGLER_NAME).pod
>> -    $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n 
>> .na/d' > $@.T$$$$ && \
>> -        mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> -    $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> -
>> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
>> -    $(AM_V_GEN)if test -f cxxfilt.man; then \
>> -      man=cxxfilt.man; \
>> -    else \
>> -      man=$(srcdir)/cxxfilt.man; \
>> -    fi; \
>> -    sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>> -        -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> -        > $(DEMANGLER_NAME).1
>> -
>> -html-local: binutils/index.html
>> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
>> -    $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) 
>> $(MAKEINFOFLAGS) \
>> -      --split=node -I$(srcdir) $(srcdir)/binutils.texi
>> -
>> -# Maintenance
>> -
>> -# We need it for the taz target in ../../Makefile.in.
>> -info-local: $(MANS)
>> -
>> -# Tell versions [3.59,3.63) of GNU make to not export all variables.
>> -# Otherwise a system limit (for SysV at least) may be exceeded.
>> -.NOEXPORT:
>> diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
>> similarity index 77%
>> rename from binutils/doc/Makefile.am
>> rename to binutils/doc/local.mk
>> index 90b238ddf8d9..687b3f65e6cb 100644
>> --- a/binutils/doc/Makefile.am
>> +++ b/binutils/doc/local.mk
>> @@ -6,19 +6,17 @@
>>   # it under the terms of the GNU General Public License as published by
>>   # the Free Software Foundation; either version 3 of the License, or
>>   # (at your option) any later version.
>> -#
>> +#
>>   # This program is distributed in the hope that it will be useful,
>>   # but WITHOUT ANY WARRANTY; without even the implied warranty of
>>   # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>   # GNU General Public License for more details.
>> -#
>> +#
>>   # You should have received a copy of the GNU General Public License
>>   # along with this program; see the file COPYING3.  If not see
>>   # <http://www.gnu.org/licenses/>.
>>   #
>> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
>> -
>>   # What version of the manual you want; "all" includes everything
>>   CONFIG=all
>> @@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development 
>> Tools" \
>>   # List of man pages generated from binutils.texi
>>   man_MANS = \
>> -    addr2line.1 \
>> -    ar.1 \
>> -    dlltool.1 \
>> -    nm.1 \
>> -    objcopy.1 \
>> -    objdump.1 \
>> -    ranlib.1 \
>> -    readelf.1 \
>> -    size.1 \
>> -    strings.1 \
>> -    strip.1 \
>> -    elfedit.1 \
>> -    windres.1 \
>> -    windmc.1 \
>> -    $(DEMANGLER_NAME).1
>> -
>> -info_TEXINFOS = binutils.texi
>> -binutils_TEXI = $(srcdir)/binutils.texi
>> -
>> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> -           -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
>> +    %D%/addr2line.1 \
>> +    %D%/ar.1 \
>> +    %D%/dlltool.1 \
>> +    %D%/nm.1 \
>> +    %D%/objcopy.1 \
>> +    %D%/objdump.1 \
>> +    %D%/ranlib.1 \
>> +    %D%/readelf.1 \
>> +    %D%/size.1 \
>> +    %D%/strings.1 \
>> +    %D%/strip.1 \
>> +    %D%/elfedit.1 \
>> +    %D%/windres.1 \
>> +    %D%/windmc.1 \
>> +    %D%/$(DEMANGLER_NAME).1
>> +
>> +info_TEXINFOS = %D%/binutils.texi
>> +binutils_TEXI = $(srcdir)/%D%/binutils.texi
>> +
>> +AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
>> +           -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
>>              --no-split
>> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> -            -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
>> +TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
>> +            -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>>   # Man page generation from texinfo
>> -addr2line.1:    $(binutils_TEXI)
>> +%D%/addr2line.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) 
>> > addr2line.pod
>>       $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f addr2line.pod
>> -ar.1:    $(binutils_TEXI)
>> +%D%/ar.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>>       $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f ar.pod
>> -dlltool.1:    $(binutils_TEXI)
>> +%D%/dlltool.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > 
>> dlltool.pod
>>       $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f dlltool.pod
>> -nm.1:    $(binutils_TEXI)
>> +%D%/nm.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>>       $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f nm.pod
>> -objcopy.1:    $(binutils_TEXI)
>> +%D%/objcopy.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > 
>> objcopy.pod
>>       $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f objcopy.pod
>> -objdump.1:    $(binutils_TEXI)
>> +%D%/objdump.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > 
>> objdump.pod
>>       $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f objdump.pod
>> -ranlib.1:    $(binutils_TEXI)
>> +%D%/ranlib.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > 
>> ranlib.pod
>>       $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f ranlib.pod
>> -readelf.1:    $(binutils_TEXI)
>> +%D%/readelf.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > 
>> readelf.pod
>>       $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f readelf.pod
>> -size.1:    $(binutils_TEXI)
>> +%D%/size.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > 
>> size.pod
>>       $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f size.pod
>> -strings.1:    $(binutils_TEXI)
>> +%D%/strings.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > 
>> strings.pod
>>       $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f strings.pod
>> -strip.1:    $(binutils_TEXI)
>> +%D%/strip.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > 
>> strip.pod
>>       $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f strip.pod
>> -elfedit.1:    $(binutils_TEXI)
>> +%D%/elfedit.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > 
>> elfedit.pod
>>       $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f elfedit.pod
>> -windres.1:    $(binutils_TEXI)
>> +%D%/windres.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > 
>> windres.pod
>>       $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f windres.pod
>> -windmc.1:    $(binutils_TEXI)
>> +%D%/windmc.1:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > 
>> windmc.pod
>>       $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > 
>> $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f windmc.pod
>> -cxxfilt.man:    $(binutils_TEXI)
>> +%D%/cxxfilt.man:    $(binutils_TEXI)
>>       $(AM_V_GEN)touch $@
>>       $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > 
>> $(DEMANGLER_NAME).pod
>>       $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n 
>> .na/d' > $@.T$$$$ && \
>>           mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>>       $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
>> +MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
>> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
>> -    $(AM_V_GEN)if test -f cxxfilt.man; then \
>> -      man=cxxfilt.man; \
>> +%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
>> +    $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
>> +      man=%D%/cxxfilt.man; \
>>       else \
>> -      man=$(srcdir)/cxxfilt.man; \
>> +      man=$(srcdir)/%D%/cxxfilt.man; \
>>       fi; \
>>       sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>>           -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> -        > $(DEMANGLER_NAME).1
>> +        > %D%/$(DEMANGLER_NAME).1
>> -html-local: binutils/index.html
>> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
>> +html-local: %D%/binutils/index.html
>> +binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
>>       $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) 
>> $(MAKEINFOFLAGS) \
>> -      --split=node -I$(srcdir) $(srcdir)/binutils.texi
>> +      --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
>>   # Maintenance
>> -# We need it for the taz target in ../../Makefile.in.
>> +# We need it for the taz target in ../Makefile.in.
>>   info-local: $(MANS)
>>