[PATCH 2/2] binutils: merge doc subdir up a level
Luis Machado
luis.machado@linaro.org
Tue Nov 30 10:17:23 GMT 2021
Hi Mike,
It seems this patch is causing some semi-deterministic failures in
parallel builds. Sometimes it fails, other times it doesn't.
Here's the output of one that has failed:
--
GEN doc/addr2line.1
[261/1955]
GEN doc/dlltool.1
GEN doc/nm.1
touch: cannot touch 'doc/addr2line.1' GEN doc/objcopy.1
: No such file or directory
Makefile:2017: recipe for target 'doc/addr2line.1' failed
make[3]: *** [doc/addr2line.1] Error 1
make[3]: *** Waiting for unfinished jobs....
touch: cannot touch 'doc/dlltool.1': No such file or directory
GEN doc/objdump.1
GEN doc/ranlib.1
GEN doc/ar.1
Makefile:2031: recipe for target 'doc/dlltool.1' failed
make[3]: *** [doc/dlltool.1] Error 1
touch: cannot touch 'doc/objcopy.1': No such file or directory
touch: cannot touch 'doc/nm.1' GEN doc/strings.1
Makefile:2045: recipe for target 'doc/objcopy.1' failed
make[3]: *** [doc/objcopy.1] Error 1
: No such file or directory
GEN doc/readelf.1
configure: updating cache ./config.cache
touch: cannot touch 'doc/objdump.1': No such file or directory
touch: cannot touch 'doc/ranlib.1': No such file or directory
touch: cannot touch 'doc/readelf.1'touch: cannot touch 'doc/strings.1':
No such file or directory
: No such file or directory
touch: cannot touch 'doc/ar.1': No such file or directory
Makefile:2066: recipe for target 'doc/readelf.1' failed
make[3]: *** [doc/readelf.1] Error 1
GEN doc/size.1
Makefile:2024: recipe for target 'doc/ar.1' failed
make[3]: *** [doc/ar.1] Error 1
Makefile:2038: recipe for target 'doc/nm.1' failed
make[3]: *** [doc/nm.1] Error 1
Makefile:2080: recipe for target 'doc/strings.1' failed
make[3]: *** [doc/strings.1] Error 1
GEN doc/strip.1
Makefile:2052: recipe for target 'doc/objdump.1' failed
make[3]: *** [doc/objdump.1] Error 1
touch: cannot touch 'doc/strip.1': No such file or directory
make[4]: Entering directory
'/home/luis.machado/work/tcwg/builds/binutils-gdb-arm64-bionic/binutils'
checking that generated files are newer than configure... done
configure: creating ./config.status
Makefile:2059: recipe for target 'doc/ranlib.1' failed
make[3]: *** [doc/ranlib.1] Error 1
Makefile:2087: recipe for target 'doc/strip.1' failed
make[3]: *** [doc/strip.1] Error 1
touch: cannot touch 'doc/size.1': No such file or directory
Makefile:2073: recipe for target 'doc/size.1' failed
make[3]: *** [doc/size.1] Error 1
--
It is a fresh build from a clean tree. Resuming the build makes it
complete, so I suppose there is some race condition somewhere. My build
is a -j160. A -j1 completes just fine.
I'm on Ubuntu 20.04.
On 11/26/21 1:16 AM, Mike Frysinger via Binutils wrote:
> This avoids a recursive make into the doc subdir and speeds up the
> build slightly. It also allows for more parallelism.
> ---
> binutils/Makefile.am | 8 +-
> binutils/Makefile.in | 594 +++++++++++++-
> binutils/configure.ac | 2 +-
> binutils/doc/Makefile.in | 1045 ------------------------
> binutils/doc/{Makefile.am => local.mk} | 102 ++-
> 5 files changed, 608 insertions(+), 1143 deletions(-)
> delete mode 100644 binutils/doc/Makefile.in
> rename binutils/doc/{Makefile.am => local.mk} (77%)
>
> diff --git a/binutils/Makefile.am b/binutils/Makefile.am
> index 9ceb63da7b80..f54dadd921dc 100644
> --- a/binutils/Makefile.am
> +++ b/binutils/Makefile.am
> @@ -17,13 +17,15 @@
> # <http://www.gnu.org/licenses/>.
> #
>
> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>
> -SUBDIRS = doc po
> +SUBDIRS = po
>
> tooldir = $(exec_prefix)/$(target_alias)
>
> +MAINTAINERCLEANFILES =
> +
> ## These aren't set by automake, because they appear in
> ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
> ## thus is not seen by automake.
> @@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
> else true; \
> fi; \
> done
> +
> +include doc/local.mk
> diff --git a/binutils/Makefile.in b/binutils/Makefile.in
> index 1986261f9e33..336644a3983a 100644
> --- a/binutils/Makefile.in
> +++ b/binutils/Makefile.in
> @@ -32,6 +32,24 @@
> # <http://www.gnu.org/licenses/>.
> #
>
> +#
> +# Copyright (C) 2012-2021 Free Software Foundation, Inc.
> +#
> +# This file is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; see the file COPYING3. If not see
> +# <http://www.gnu.org/licenses/>.
> +#
> +
>
> VPATH = @srcdir@
> am__is_gnu_make = { \
> @@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
> am__EXEEXT_11 = addr2line$(EXEEXT)
> am__EXEEXT_12 = readelf$(EXEEXT)
> am__EXEEXT_13 = elfedit$(EXEEXT)
> -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
> +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
> + "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
> am__EXEEXT_14 = nm-new$(EXEEXT)
> am__EXEEXT_15 = strip-new$(EXEEXT)
> am__EXEEXT_16 = cxxfilt$(EXEEXT)
> @@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES) $(EXTRA_ar_SOURCES) \
> $(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
> $(strip_new_SOURCES) $(sysdump_SOURCES) \
> testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
> +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
> +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
> +am__v_DVIPS_0 = @echo " DVIPS " $@;
> +am__v_DVIPS_1 =
> +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
> +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
> +am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
> +am__v_MAKEINFO_1 =
> +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
> +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
> +am__v_INFOHTML_0 = @echo " INFOHTML" $@;
> +am__v_INFOHTML_1 =
> +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
> +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
> +am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
> +am__v_TEXI2DVI_1 =
> +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
> +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
> +am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
> +am__v_TEXI2PDF_1 =
> +AM_V_texinfo = $(am__v_texinfo_@AM_V@)
> +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
> +am__v_texinfo_0 = -q
> +am__v_texinfo_1 =
> +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
> +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
> +am__v_texidevnull_0 = > /dev/null
> +am__v_texidevnull_1 =
> +INFO_DEPS = doc/binutils.info
> +am__TEXINFO_TEX_DIR = $(srcdir)
> +DVIS = doc/binutils.dvi
> +PDFS = doc/binutils.pdf
> +PSS = doc/binutils.ps
> +HTMLS = doc/binutils.html
> +TEXINFOS = doc/binutils.texi
> +TEXI2PDF = $(TEXI2DVI) --pdf --batch
> +MAKEINFOHTML = $(MAKEINFO) --html
> +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
> +DVIPS = dvips
> RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
> ctags-recursive dvi-recursive html-recursive info-recursive \
> install-data-recursive install-dvi-recursive \
> @@ -369,6 +427,9 @@ am__can_run_installinfo = \
> n|no|NO) false;; \
> *) (install-info --version) >/dev/null 2>&1;; \
> esac
> +man1dir = $(mandir)/man1
> +NROFF = nroff
> +MANS = $(man_MANS)
> RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
> distclean-recursive maintainer-clean-recursive
> am__recursive_targets = \
> @@ -569,10 +630,11 @@ top_builddir = @top_builddir@
> top_srcdir = @top_srcdir@
> zlibdir = @zlibdir@
> zlibinc = @zlibinc@
> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
> -SUBDIRS = doc po
> +SUBDIRS = po
> tooldir = $(exec_prefix)/$(target_alias)
> +MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
>
> # Automake 1.10+ disables lex and yacc output file regeneration if
> # maintainer mode is disabled. Avoid this.
> @@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
> MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
> binutils.log binutils.sum abcdefgh*
>
> +
> +# What version of the manual you want; "all" includes everything
> +CONFIG = all
> +
> +# Options to extract the man page from as.texinfo
> +MANCONF = -Dman
> +TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
> +POD2MAN = pod2man --center="GNU Development Tools" \
> + --release="binutils-$(VERSION)" --section=1
> +
> +
> +# List of man pages generated from binutils.texi
> +man_MANS = \
> + doc/addr2line.1 \
> + doc/ar.1 \
> + doc/dlltool.1 \
> + doc/nm.1 \
> + doc/objcopy.1 \
> + doc/objdump.1 \
> + doc/ranlib.1 \
> + doc/readelf.1 \
> + doc/size.1 \
> + doc/strings.1 \
> + doc/strip.1 \
> + doc/elfedit.1 \
> + doc/windres.1 \
> + doc/windmc.1 \
> + doc/$(DEMANGLER_NAME).1
> +
> +info_TEXINFOS = doc/binutils.texi
> +binutils_TEXI = $(srcdir)/doc/binutils.texi
> +AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
> + --no-split
> +
> +TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
> +
> all: $(BUILT_SOURCES) config.h
> $(MAKE) $(AM_MAKEFLAGS) all-recursive
>
> .SUFFIXES:
> -.SUFFIXES: .c .l .lo .o .obj .y
> +.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
> am--refresh: Makefile
> @:
> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
> +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
> @for dep in $?; do \
> case '$(am__configure_deps)' in \
> *$$dep*) \
> @@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
> cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
> esac;
> +$(srcdir)/doc/local.mk $(am__empty):
>
> $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
> $(SHELL) ./config.status --recheck
> @@ -1139,6 +1240,186 @@ clean-libtool:
>
> distclean-libtool:
> -rm -f libtool config.lt
> +doc/$(am__dirstamp):
> + @$(MKDIR_P) doc
> + @: > doc/$(am__dirstamp)
> +
> +doc/binutils.info: doc/binutils.texi
> + @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
> + $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
> + rm -rf $$backupdir && mkdir $$backupdir && \
> + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
> + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
> + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
> + done; \
> + else :; fi && \
> + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
> + -o $@ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
> + then \
> + rc=0; \
> + else \
> + rc=$$?; \
> + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
> + fi; \
> + rm -rf $$backupdir; exit $$rc
> +
> +doc/binutils.dvi: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
> + $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
> +
> +doc/binutils.pdf: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
> + $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
> +
> +doc/binutils.html: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
> + $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
> + -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
> + then \
> + rm -rf $@ && mv $(@:.html=.htp) $@; \
> + else \
> + rm -rf $(@:.html=.htp); exit 1; \
> + fi
> +.dvi.ps:
> + $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + $(DVIPS) $(AM_V_texinfo) -o $@ $<
> +
> +uninstall-dvi-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
> + rm -f "$(DESTDIR)$(dvidir)/$$f"; \
> + done
> +
> +uninstall-html-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
> + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
> + done
> +
> +uninstall-info-am:
> + @$(PRE_UNINSTALL)
> + @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
> + list='$(INFO_DEPS)'; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
> + if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
> + then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
> + done; \
> + else :; fi
> + @$(NORMAL_UNINSTALL)
> + @list='$(INFO_DEPS)'; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
> + (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
> + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
> + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
> + else :; fi); \
> + done
> +
> +uninstall-pdf-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
> + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
> + done
> +
> +uninstall-ps-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
> + rm -f "$(DESTDIR)$(psdir)/$$f"; \
> + done
> +
> +dist-info: $(INFO_DEPS)
> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> + list='$(INFO_DEPS)'; \
> + for base in $$list; do \
> + case $$base in \
> + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
> + esac; \
> + if test -f $$base; then d=.; else d=$(srcdir); fi; \
> + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
> + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
> + if test -f $$file; then \
> + relfile=`expr "$$file" : "$$d/\(.*\)"`; \
> + test -f "$(distdir)/$$relfile" || \
> + cp -p $$file "$(distdir)/$$relfile"; \
> + else :; fi; \
> + done; \
> + done
> +
> +mostlyclean-aminfo:
> + -rm -rf doc/binutils.t2d doc/binutils.t2p
> +
> +clean-aminfo:
> + -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html" \
> + || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html
> +
> +maintainer-clean-aminfo:
> + @list='$(INFO_DEPS)'; for i in $$list; do \
> + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
> + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
> + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
> + done
> +install-man1: $(man_MANS)
> + @$(NORMAL_INSTALL)
> + @list1=''; \
> + list2='$(man_MANS)'; \
> + test -n "$(man1dir)" \
> + && test -n "`echo $$list1$$list2`" \
> + || exit 0; \
> + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
> + { for i in $$list1; do echo "$$i"; done; \
> + if test -n "$$list2"; then \
> + for i in $$list2; do echo "$$i"; done \
> + | sed -n '/\.1[a-z]*$$/p'; \
> + fi; \
> + } | while read p; do \
> + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; echo "$$p"; \
> + done | \
> + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
> + sed 'N;N;s,\n, ,g' | { \
> + list=; while read file base inst; do \
> + if test "$$base" = "$$inst"; then list="$$list $$file"; else \
> + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
> + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
> + fi; \
> + done; \
> + for i in $$list; do echo "$$i"; done | $(am__base_list) | \
> + while read files; do \
> + test -z "$$files" || { \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
> + done; }
> +
> +uninstall-man1:
> + @$(NORMAL_UNINSTALL)
> + @list=''; test -n "$(man1dir)" || exit 0; \
> + files=`{ for i in $$list; do echo "$$i"; done; \
> + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
> + sed -n '/\.1[a-z]*$$/p'; \
> + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
> + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>
> # This directory's subdirectories are mostly independent; you can cd
> # into them and run 'make' without going through this Makefile.
> @@ -1281,10 +1562,10 @@ check-am: all-am
> $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
> check: $(BUILT_SOURCES)
> $(MAKE) $(AM_MAKEFLAGS) check-recursive
> -all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
> +all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
> installdirs: installdirs-recursive
> installdirs-am:
> - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
> + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
> test -z "$$dir" || $(MKDIR_P) "$$dir"; \
> done
> install: $(BUILT_SOURCES)
> @@ -1315,6 +1596,7 @@ clean-generic:
> distclean-generic:
> -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
> -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
> + -rm -f doc/$(am__dirstamp)
> -rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
> -rm -f testsuite/$(am__dirstamp)
> -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
> @@ -1333,9 +1615,10 @@ maintainer-clean-generic:
> -rm -f rcparse.c
> -rm -f rcparse.h
> -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
> + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
> clean: clean-recursive
>
> -clean-am: clean-binPROGRAMS clean-generic clean-libtool \
> +clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
> clean-noinstPROGRAMS mostlyclean-am
>
> distclean: distclean-recursive
> @@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU distclean-compile \
>
> dvi: dvi-recursive
>
> -dvi-am:
> +dvi-am: $(DVIS)
>
> html: html-recursive
>
> -html-am:
> +html-am: $(HTMLS) html-local
>
> info: info-recursive
>
> -info-am:
> +info-am: $(INFO_DEPS) info-local
>
> -install-data-am:
> +install-data-am: install-info-am install-man
>
> install-dvi: install-dvi-recursive
>
> -install-dvi-am:
> -
> +install-dvi-am: $(DVIS)
> + @$(NORMAL_INSTALL)
> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
> + done
> install-exec-am: install-binPROGRAMS install-binSCRIPTS \
> install-exec-local
>
> install-html: install-html-recursive
>
> -install-html-am:
> -
> +install-html-am: $(HTMLS)
> + @$(NORMAL_INSTALL)
> + @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + $(am__strip_dir) \
> + d2=$$d$$p; \
> + if test -d "$$d2"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
> + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
> + echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
> + $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
> + else \
> + list2="$$list2 $$d2"; \
> + fi; \
> + done; \
> + test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
> + done; }
> install-info: install-info-recursive
>
> -install-info-am:
> -
> -install-man:
> +install-info-am: $(INFO_DEPS)
> + @$(NORMAL_INSTALL)
> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
> + fi; \
> + for file in $$list; do \
> + case $$file in \
> + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
> + esac; \
> + if test -f $$file; then d=.; else d=$(srcdir); fi; \
> + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
> + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
> + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
> + if test -f $$ifile; then \
> + echo "$$ifile"; \
> + else : ; fi; \
> + done; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
> + @$(POST_INSTALL)
> + @if $(am__can_run_installinfo); then \
> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
> + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
> + done; \
> + else : ; fi
> +install-man: install-man1
>
> install-pdf: install-pdf-recursive
>
> -install-pdf-am:
> -
> +install-pdf-am: $(PDFS)
> + @$(NORMAL_INSTALL)
> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
> install-ps: install-ps-recursive
>
> -install-ps-am:
> -
> +install-ps-am: $(PSS)
> + @$(NORMAL_INSTALL)
> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
> installcheck-am: installcheck-local
>
> maintainer-clean: maintainer-clean-recursive
> @@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
> -rm -rf $(top_srcdir)/autom4te.cache
> -rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
> -rm -f Makefile
> -maintainer-clean-am: distclean-am maintainer-clean-generic
> +maintainer-clean-am: distclean-am maintainer-clean-aminfo \
> + maintainer-clean-generic
>
> mostlyclean: mostlyclean-recursive
>
> -mostlyclean-am: mostlyclean-compile mostlyclean-generic \
> - mostlyclean-libtool mostlyclean-local
> +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
> + mostlyclean-generic mostlyclean-libtool mostlyclean-local
>
> pdf: pdf-recursive
>
> -pdf-am:
> +pdf-am: $(PDFS)
>
> ps: ps-recursive
>
> -ps-am:
> +ps-am: $(PSS)
> +
> +uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
> + uninstall-dvi-am uninstall-html-am uninstall-info-am \
> + uninstall-man uninstall-pdf-am uninstall-ps-am
>
> -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
> +uninstall-man: uninstall-man1
>
> .MAKE: $(am__recursive_targets) all check check-am install install-am \
> install-strip
>
> .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
> - am--refresh check check-DEJAGNU check-am clean \
> + am--refresh check check-DEJAGNU check-am clean clean-aminfo \
> clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
> clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
> - distclean distclean-DEJAGNU distclean-compile \
> + dist-info distclean distclean-DEJAGNU distclean-compile \
> distclean-generic distclean-hdr distclean-libtool \
> - distclean-tags dvi dvi-am html html-am info info-am install \
> - install-am install-binPROGRAMS install-binSCRIPTS install-data \
> - install-data-am install-dvi install-dvi-am install-exec \
> - install-exec-am install-exec-local install-html \
> - install-html-am install-info install-info-am install-man \
> - install-pdf install-pdf-am install-ps install-ps-am \
> - install-strip installcheck installcheck-am installcheck-local \
> - installdirs installdirs-am maintainer-clean \
> - maintainer-clean-generic mostlyclean mostlyclean-compile \
> - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
> - pdf-am ps ps-am tags tags-am uninstall uninstall-am \
> - uninstall-binPROGRAMS uninstall-binSCRIPTS
> + distclean-tags dvi dvi-am html html-am html-local info info-am \
> + info-local install install-am install-binPROGRAMS \
> + install-binSCRIPTS install-data install-data-am install-dvi \
> + install-dvi-am install-exec install-exec-am install-exec-local \
> + install-html install-html-am install-info install-info-am \
> + install-man install-man1 install-pdf install-pdf-am install-ps \
> + install-ps-am install-strip installcheck installcheck-am \
> + installcheck-local installdirs installdirs-am maintainer-clean \
> + maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
> + mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
> + mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
> + tags-am uninstall uninstall-am uninstall-binPROGRAMS \
> + uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
> + uninstall-info-am uninstall-man uninstall-man1 \
> + uninstall-pdf-am uninstall-ps-am
>
> .PRECIOUS: Makefile
>
> @@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
> fi; \
> done
>
> +# Man page generation from texinfo
> +doc/addr2line.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> + $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f addr2line.pod
> +
> +doc/ar.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> + $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f ar.pod
> +
> +doc/dlltool.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> + $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f dlltool.pod
> +
> +doc/nm.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> + $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f nm.pod
> +
> +doc/objcopy.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> + $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f objcopy.pod
> +
> +doc/objdump.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> + $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f objdump.pod
> +
> +doc/ranlib.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> + $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f ranlib.pod
> +
> +doc/readelf.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> + $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f readelf.pod
> +
> +doc/size.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> + $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f size.pod
> +
> +doc/strings.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> + $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f strings.pod
> +
> +doc/strip.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> + $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f strip.pod
> +
> +doc/elfedit.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> + $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f elfedit.pod
> +
> +doc/windres.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> + $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f windres.pod
> +
> +doc/windmc.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> + $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f windmc.pod
> +
> +doc/cxxfilt.man: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> + $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
> +
> +doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
> + $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
> + man=doc/cxxfilt.man; \
> + else \
> + man=$(srcdir)/doc/cxxfilt.man; \
> + fi; \
> + sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> + -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> + > doc/$(DEMANGLER_NAME).1
> +
> +html-local: doc/binutils/index.html
> +binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
> + $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> + --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
> +
> +# Maintenance
> +
> +# We need it for the taz target in ../Makefile.in.
> +info-local: $(MANS)
> +
> # Tell versions [3.59,3.63) of GNU make to not export all variables.
> # Otherwise a system limit (for SysV at least) may be exceeded.
> .NOEXPORT:
> diff --git a/binutils/configure.ac b/binutils/configure.ac
> index b0677ba5f20e..62696ff2a225 100644
> --- a/binutils/configure.ac
> +++ b/binutils/configure.ac
> @@ -535,7 +535,7 @@ AC_SUBST(docdir)
> AC_SUBST(htmldir)
> AC_SUBST(pdfdir)
>
> -AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
> +AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
> AC_OUTPUT
>
> GNU_MAKE_JOBSERVER
> diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
> deleted file mode 100644
> index d42cdd87929b..000000000000
> --- a/binutils/doc/Makefile.in
> +++ /dev/null
> @@ -1,1045 +0,0 @@
> -# Makefile.in generated by automake 1.15.1 from Makefile.am.
> -# @configure_input@
> -
> -# Copyright (C) 1994-2017 Free Software Foundation, Inc.
> -
> -# This Makefile.in is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
> -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
> -# PARTICULAR PURPOSE.
> -
> -@SET_MAKE@
> -
> -#
> -# Copyright (C) 2012-2021 Free Software Foundation, Inc.
> -#
> -# This file is free software; you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 3 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; see the file COPYING3. If not see
> -# <http://www.gnu.org/licenses/>.
> -#
> -VPATH = @srcdir@
> -am__is_gnu_make = { \
> - if test -z '$(MAKELEVEL)'; then \
> - false; \
> - elif test -n '$(MAKE_HOST)'; then \
> - true; \
> - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
> - true; \
> - else \
> - false; \
> - fi; \
> -}
> -am__make_running_with_option = \
> - case $${target_option-} in \
> - ?) ;; \
> - *) echo "am__make_running_with_option: internal error: invalid" \
> - "target option '$${target_option-}' specified" >&2; \
> - exit 1;; \
> - esac; \
> - has_opt=no; \
> - sane_makeflags=$$MAKEFLAGS; \
> - if $(am__is_gnu_make); then \
> - sane_makeflags=$$MFLAGS; \
> - else \
> - case $$MAKEFLAGS in \
> - *\\[\ \ ]*) \
> - bs=\\; \
> - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
> - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
> - esac; \
> - fi; \
> - skip_next=no; \
> - strip_trailopt () \
> - { \
> - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
> - }; \
> - for flg in $$sane_makeflags; do \
> - test $$skip_next = yes && { skip_next=no; continue; }; \
> - case $$flg in \
> - *=*|--*) continue;; \
> - -*I) strip_trailopt 'I'; skip_next=yes;; \
> - -*I?*) strip_trailopt 'I';; \
> - -*O) strip_trailopt 'O'; skip_next=yes;; \
> - -*O?*) strip_trailopt 'O';; \
> - -*l) strip_trailopt 'l'; skip_next=yes;; \
> - -*l?*) strip_trailopt 'l';; \
> - -[dEDm]) skip_next=yes;; \
> - -[JT]) skip_next=yes;; \
> - esac; \
> - case $$flg in \
> - *$$target_option*) has_opt=yes; break;; \
> - esac; \
> - done; \
> - test $$has_opt = yes
> -am__make_dryrun = (target_option=n; $(am__make_running_with_option))
> -am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
> -pkgdatadir = $(datadir)/@PACKAGE@
> -pkgincludedir = $(includedir)/@PACKAGE@
> -pkglibdir = $(libdir)/@PACKAGE@
> -pkglibexecdir = $(libexecdir)/@PACKAGE@
> -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
> -install_sh_DATA = $(install_sh) -c -m 644
> -install_sh_PROGRAM = $(install_sh) -c
> -install_sh_SCRIPT = $(install_sh) -c
> -INSTALL_HEADER = $(INSTALL_DATA)
> -transform = $(program_transform_name)
> -NORMAL_INSTALL = :
> -PRE_INSTALL = :
> -POST_INSTALL = :
> -NORMAL_UNINSTALL = :
> -PRE_UNINSTALL = :
> -POST_UNINSTALL = :
> -build_triplet = @build@
> -host_triplet = @host@
> -target_triplet = @target@
> -subdir = doc
> -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> -am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
> - $(top_srcdir)/../bfd/warning.m4 \
> - $(top_srcdir)/../config/depstand.m4 \
> - $(top_srcdir)/../config/enable.m4 \
> - $(top_srcdir)/../config/gettext-sister.m4 \
> - $(top_srcdir)/../config/iconv.m4 \
> - $(top_srcdir)/../config/jobserver.m4 \
> - $(top_srcdir)/../config/largefile.m4 \
> - $(top_srcdir)/../config/lcmessage.m4 \
> - $(top_srcdir)/../config/lead-dot.m4 \
> - $(top_srcdir)/../config/lib-ld.m4 \
> - $(top_srcdir)/../config/lib-link.m4 \
> - $(top_srcdir)/../config/lib-prefix.m4 \
> - $(top_srcdir)/../config/nls.m4 \
> - $(top_srcdir)/../config/override.m4 \
> - $(top_srcdir)/../config/pkg.m4 \
> - $(top_srcdir)/../config/plugins.m4 \
> - $(top_srcdir)/../config/po.m4 \
> - $(top_srcdir)/../config/progtest.m4 \
> - $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
> - $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
> - $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
> - $(top_srcdir)/../bfd/version.m4 \
> - $(top_srcdir)/../config/debuginfod.m4 \
> - $(top_srcdir)/configure.ac
> -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
> - $(ACLOCAL_M4)
> -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
> -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
> -CONFIG_HEADER = $(top_builddir)/config.h
> -CONFIG_CLEAN_FILES =
> -CONFIG_CLEAN_VPATH_FILES =
> -AM_V_P = $(am__v_P_@AM_V@)
> -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
> -am__v_P_0 = false
> -am__v_P_1 = :
> -AM_V_GEN = $(am__v_GEN_@AM_V@)
> -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
> -am__v_GEN_0 = @echo " GEN " $@;
> -am__v_GEN_1 =
> -AM_V_at = $(am__v_at_@AM_V@)
> -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
> -am__v_at_0 = @
> -am__v_at_1 =
> -SOURCES =
> -DIST_SOURCES =
> -AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
> -am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
> -am__v_DVIPS_0 = @echo " DVIPS " $@;
> -am__v_DVIPS_1 =
> -AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
> -am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
> -am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
> -am__v_MAKEINFO_1 =
> -AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
> -am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
> -am__v_INFOHTML_0 = @echo " INFOHTML" $@;
> -am__v_INFOHTML_1 =
> -AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
> -am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
> -am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
> -am__v_TEXI2DVI_1 =
> -AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
> -am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
> -am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
> -am__v_TEXI2PDF_1 =
> -AM_V_texinfo = $(am__v_texinfo_@AM_V@)
> -am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
> -am__v_texinfo_0 = -q
> -am__v_texinfo_1 =
> -AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
> -am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
> -am__v_texidevnull_0 = > /dev/null
> -am__v_texidevnull_1 =
> -INFO_DEPS = binutils.info
> -am__TEXINFO_TEX_DIR = $(srcdir)
> -DVIS = binutils.dvi
> -PDFS = binutils.pdf
> -PSS = binutils.ps
> -HTMLS = binutils.html
> -TEXINFOS = binutils.texi
> -TEXI2PDF = $(TEXI2DVI) --pdf --batch
> -MAKEINFOHTML = $(MAKEINFO) --html
> -AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
> -DVIPS = dvips
> -am__can_run_installinfo = \
> - case $$AM_UPDATE_INFO_DIR in \
> - n|no|NO) false;; \
> - *) (install-info --version) >/dev/null 2>&1;; \
> - esac
> -am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
> -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
> -am__vpath_adj = case $$p in \
> - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
> - *) f=$$p;; \
> - esac;
> -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
> -am__install_max = 40
> -am__nobase_strip_setup = \
> - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
> -am__nobase_strip = \
> - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
> -am__nobase_list = $(am__nobase_strip_setup); \
> - for p in $$list; do echo "$$p $$p"; done | \
> - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
> - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
> - if (++n[$$2] == $(am__install_max)) \
> - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
> - END { for (dir in files) print dir, files[dir] }'
> -am__base_list = \
> - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
> - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
> -am__uninstall_files_from_dir = { \
> - test -z "$$files" \
> - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
> - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
> - $(am__cd) "$$dir" && rm -f $$files; }; \
> - }
> -man1dir = $(mandir)/man1
> -NROFF = nroff
> -MANS = $(man_MANS)
> -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
> -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
> -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
> -ACLOCAL = @ACLOCAL@
> -AMTAR = @AMTAR@
> -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
> -AR = @AR@
> -AUTOCONF = @AUTOCONF@
> -AUTOHEADER = @AUTOHEADER@
> -AUTOMAKE = @AUTOMAKE@
> -AWK = @AWK@
> -BUILD_DLLTOOL = @BUILD_DLLTOOL@
> -BUILD_DLLWRAP = @BUILD_DLLWRAP@
> -BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
> -BUILD_MISC = @BUILD_MISC@
> -BUILD_SRCONV = @BUILD_SRCONV@
> -BUILD_WINDMC = @BUILD_WINDMC@
> -BUILD_WINDRES = @BUILD_WINDRES@
> -CATALOGS = @CATALOGS@
> -CATOBJEXT = @CATOBJEXT@
> -CC = @CC@
> -CCDEPMODE = @CCDEPMODE@
> -CC_FOR_BUILD = @CC_FOR_BUILD@
> -CFLAGS = @CFLAGS@
> -CPP = @CPP@
> -CPPFLAGS = @CPPFLAGS@
> -CYGPATH_W = @CYGPATH_W@
> -DATADIRNAME = @DATADIRNAME@
> -DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
> -DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
> -DEFS = @DEFS@
> -DEMANGLER_NAME = @DEMANGLER_NAME@
> -DEPDIR = @DEPDIR@
> -DLLTOOL_DEFS = @DLLTOOL_DEFS@
> -DSYMUTIL = @DSYMUTIL@
> -DUMPBIN = @DUMPBIN@
> -ECHO_C = @ECHO_C@
> -ECHO_N = @ECHO_N@
> -ECHO_T = @ECHO_T@
> -EGREP = @EGREP@
> -EMULATION = @EMULATION@
> -EMULATION_VECTOR = @EMULATION_VECTOR@
> -EXEEXT = @EXEEXT@
> -EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
> -FGREP = @FGREP@
> -GENCAT = @GENCAT@
> -GMSGFMT = @GMSGFMT@
> -GREP = @GREP@
> -HDEFINES = @HDEFINES@
> -INCINTL = @INCINTL@
> -INSTALL = @INSTALL@
> -INSTALL_DATA = @INSTALL_DATA@
> -INSTALL_PROGRAM = @INSTALL_PROGRAM@
> -INSTALL_SCRIPT = @INSTALL_SCRIPT@
> -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
> -INSTOBJEXT = @INSTOBJEXT@
> -LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
> -LD = @LD@
> -LDFLAGS = @LDFLAGS@
> -LEX = @LEX@
> -LEXLIB = @LEXLIB@
> -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
> -LIBICONV = @LIBICONV@
> -LIBINTL = @LIBINTL@
> -LIBINTL_DEP = @LIBINTL_DEP@
> -LIBOBJS = @LIBOBJS@
> -LIBS = @LIBS@
> -LIBTOOL = @LIBTOOL@
> -LIPO = @LIPO@
> -LN_S = @LN_S@
> -LTLIBICONV = @LTLIBICONV@
> -LTLIBOBJS = @LTLIBOBJS@
> -MAINT = @MAINT@
> -MAKEINFO = @MAKEINFO@
> -MKDIR_P = @MKDIR_P@
> -MKINSTALLDIRS = @MKINSTALLDIRS@
> -MSGFMT = @MSGFMT@
> -MSGMERGE = @MSGMERGE@
> -NM = @NM@
> -NMEDIT = @NMEDIT@
> -NO_WERROR = @NO_WERROR@
> -OBJDUMP = @OBJDUMP@
> -OBJDUMP_DEFS = @OBJDUMP_DEFS@
> -OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
> -OBJEXT = @OBJEXT@
> -OTOOL = @OTOOL@
> -OTOOL64 = @OTOOL64@
> -PACKAGE = @PACKAGE@
> -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
> -PACKAGE_NAME = @PACKAGE_NAME@
> -PACKAGE_STRING = @PACKAGE_STRING@
> -PACKAGE_TARNAME = @PACKAGE_TARNAME@
> -PACKAGE_URL = @PACKAGE_URL@
> -PACKAGE_VERSION = @PACKAGE_VERSION@
> -PATH_SEPARATOR = @PATH_SEPARATOR@
> -PKG_CONFIG = @PKG_CONFIG@
> -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
> -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
> -POSUB = @POSUB@
> -RANLIB = @RANLIB@
> -SED = @SED@
> -SET_MAKE = @SET_MAKE@
> -SHELL = @SHELL@
> -STRIP = @STRIP@
> -USE_NLS = @USE_NLS@
> -VERSION = @VERSION@
> -WARN_CFLAGS = @WARN_CFLAGS@
> -WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
> -WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
> -XGETTEXT = @XGETTEXT@
> -YACC = @YACC@
> -YFLAGS = @YFLAGS@
> -abs_builddir = @abs_builddir@
> -abs_srcdir = @abs_srcdir@
> -abs_top_builddir = @abs_top_builddir@
> -abs_top_srcdir = @abs_top_srcdir@
> -ac_ct_CC = @ac_ct_CC@
> -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
> -am__include = @am__include@
> -am__leading_dot = @am__leading_dot@
> -am__quote = @am__quote@
> -am__tar = @am__tar@
> -am__untar = @am__untar@
> -bindir = @bindir@
> -build = @build@
> -build_alias = @build_alias@
> -build_cpu = @build_cpu@
> -build_os = @build_os@
> -build_vendor = @build_vendor@
> -builddir = @builddir@
> -datadir = @datadir@
> -datarootdir = @datarootdir@
> -docdir = @docdir@
> -dvidir = @dvidir@
> -exec_prefix = @exec_prefix@
> -host = @host@
> -host_alias = @host_alias@
> -host_cpu = @host_cpu@
> -host_os = @host_os@
> -host_vendor = @host_vendor@
> -htmldir = @htmldir@
> -includedir = @includedir@
> -infodir = @infodir@
> -install_sh = @install_sh@
> -libdir = @libdir@
> -libexecdir = @libexecdir@
> -localedir = @localedir@
> -localstatedir = @localstatedir@
> -mandir = @mandir@
> -mkdir_p = @mkdir_p@
> -oldincludedir = @oldincludedir@
> -pdfdir = @pdfdir@
> -prefix = @prefix@
> -program_transform_name = @program_transform_name@
> -psdir = @psdir@
> -sbindir = @sbindir@
> -sharedstatedir = @sharedstatedir@
> -srcdir = @srcdir@
> -sysconfdir = @sysconfdir@
> -target = @target@
> -target_alias = @target_alias@
> -target_cpu = @target_cpu@
> -target_os = @target_os@
> -target_vendor = @target_vendor@
> -top_build_prefix = @top_build_prefix@
> -top_builddir = @top_builddir@
> -top_srcdir = @top_srcdir@
> -zlibdir = @zlibdir@
> -zlibinc = @zlibinc@
> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
> -
> -# What version of the manual you want; "all" includes everything
> -CONFIG = all
> -
> -# Options to extract the man page from as.texinfo
> -MANCONF = -Dman
> -TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
> -POD2MAN = pod2man --center="GNU Development Tools" \
> - --release="binutils-$(VERSION)" --section=1
> -
> -
> -# List of man pages generated from binutils.texi
> -man_MANS = \
> - addr2line.1 \
> - ar.1 \
> - dlltool.1 \
> - nm.1 \
> - objcopy.1 \
> - objdump.1 \
> - ranlib.1 \
> - readelf.1 \
> - size.1 \
> - strings.1 \
> - strip.1 \
> - elfedit.1 \
> - windres.1 \
> - windmc.1 \
> - $(DEMANGLER_NAME).1
> -
> -info_TEXINFOS = binutils.texi
> -binutils_TEXI = $(srcdir)/binutils.texi
> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
> - --no-split
> -
> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
> -
> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
> -all: all-am
> -
> -.SUFFIXES:
> -.SUFFIXES: .dvi .ps
> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
> - @for dep in $?; do \
> - case '$(am__configure_deps)' in \
> - *$$dep*) \
> - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
> - && { if test -f $@; then exit 0; else break; fi; }; \
> - exit 1;; \
> - esac; \
> - done; \
> - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
> - $(am__cd) $(top_srcdir) && \
> - $(AUTOMAKE) --foreign doc/Makefile
> -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> - @case '$?' in \
> - *config.status*) \
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
> - *) \
> - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
> - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
> - esac;
> -
> -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -
> -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -$(am__aclocal_m4_deps):
> -
> -mostlyclean-libtool:
> - -rm -f *.lo
> -
> -clean-libtool:
> - -rm -rf .libs _libs
> -
> -binutils.info: binutils.texi
> - $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
> - rm -rf $$backupdir && mkdir $$backupdir && \
> - if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
> - for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
> - if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
> - done; \
> - else :; fi && \
> - if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
> - -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
> - then \
> - rc=0; \
> - else \
> - rc=$$?; \
> - $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
> - fi; \
> - rm -rf $$backupdir; exit $$rc
> -
> -binutils.dvi: binutils.texi
> - $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
> - $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
> -
> -binutils.pdf: binutils.texi
> - $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
> - $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
> -
> -binutils.html: binutils.texi
> - $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
> - $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
> - -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
> - then \
> - rm -rf $@ && mv $(@:.html=.htp) $@; \
> - else \
> - rm -rf $(@:.html=.htp); exit 1; \
> - fi
> -.dvi.ps:
> - $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - $(DVIPS) $(AM_V_texinfo) -o $@ $<
> -
> -uninstall-dvi-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
> - rm -f "$(DESTDIR)$(dvidir)/$$f"; \
> - done
> -
> -uninstall-html-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
> - rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
> - done
> -
> -uninstall-info-am:
> - @$(PRE_UNINSTALL)
> - @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
> - list='$(INFO_DEPS)'; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
> - if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
> - then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
> - done; \
> - else :; fi
> - @$(NORMAL_UNINSTALL)
> - @list='$(INFO_DEPS)'; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
> - (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
> - echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
> - rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
> - else :; fi); \
> - done
> -
> -uninstall-pdf-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
> - rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
> - done
> -
> -uninstall-ps-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
> - rm -f "$(DESTDIR)$(psdir)/$$f"; \
> - done
> -
> -dist-info: $(INFO_DEPS)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> - list='$(INFO_DEPS)'; \
> - for base in $$list; do \
> - case $$base in \
> - $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
> - esac; \
> - if test -f $$base; then d=.; else d=$(srcdir); fi; \
> - base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
> - for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
> - if test -f $$file; then \
> - relfile=`expr "$$file" : "$$d/\(.*\)"`; \
> - test -f "$(distdir)/$$relfile" || \
> - cp -p $$file "$(distdir)/$$relfile"; \
> - else :; fi; \
> - done; \
> - done
> -
> -mostlyclean-aminfo:
> - -rm -rf binutils.t2d binutils.t2p
> -
> -clean-aminfo:
> - -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
> - || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
> -
> -maintainer-clean-aminfo:
> - @list='$(INFO_DEPS)'; for i in $$list; do \
> - i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
> - echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
> - rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
> - done
> -install-man1: $(man_MANS)
> - @$(NORMAL_INSTALL)
> - @list1=''; \
> - list2='$(man_MANS)'; \
> - test -n "$(man1dir)" \
> - && test -n "`echo $$list1$$list2`" \
> - || exit 0; \
> - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
> - { for i in $$list1; do echo "$$i"; done; \
> - if test -n "$$list2"; then \
> - for i in $$list2; do echo "$$i"; done \
> - | sed -n '/\.1[a-z]*$$/p'; \
> - fi; \
> - } | while read p; do \
> - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; echo "$$p"; \
> - done | \
> - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
> - sed 'N;N;s,\n, ,g' | { \
> - list=; while read file base inst; do \
> - if test "$$base" = "$$inst"; then list="$$list $$file"; else \
> - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
> - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
> - fi; \
> - done; \
> - for i in $$list; do echo "$$i"; done | $(am__base_list) | \
> - while read files; do \
> - test -z "$$files" || { \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
> - done; }
> -
> -uninstall-man1:
> - @$(NORMAL_UNINSTALL)
> - @list=''; test -n "$(man1dir)" || exit 0; \
> - files=`{ for i in $$list; do echo "$$i"; done; \
> - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
> - sed -n '/\.1[a-z]*$$/p'; \
> - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
> - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
> -tags TAGS:
> -
> -ctags CTAGS:
> -
> -cscope cscopelist:
> -
> -
> -distdir: $(DISTFILES)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
> - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
> - list='$(DISTFILES)'; \
> - dist_files=`for file in $$list; do echo $$file; done | \
> - sed -e "s|^$$srcdirstrip/||;t" \
> - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
> - case $$dist_files in \
> - */*) $(MKDIR_P) `echo "$$dist_files" | \
> - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
> - sort -u` ;; \
> - esac; \
> - for file in $$dist_files; do \
> - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
> - if test -d $$d/$$file; then \
> - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
> - if test -d "$(distdir)/$$file"; then \
> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
> - fi; \
> - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
> - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
> - fi; \
> - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
> - else \
> - test -f "$(distdir)/$$file" \
> - || cp -p $$d/$$file "$(distdir)/$$file" \
> - || exit 1; \
> - fi; \
> - done
> - $(MAKE) $(AM_MAKEFLAGS) \
> - top_distdir="$(top_distdir)" distdir="$(distdir)" \
> - dist-info
> -check-am: all-am
> -check: check-am
> -all-am: Makefile $(INFO_DEPS) $(MANS)
> -installdirs:
> - for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
> - test -z "$$dir" || $(MKDIR_P) "$$dir"; \
> - done
> -install: install-am
> -install-exec: install-exec-am
> -install-data: install-data-am
> -uninstall: uninstall-am
> -
> -install-am: all-am
> - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
> -
> -installcheck: installcheck-am
> -install-strip:
> - if test -z '$(STRIP)'; then \
> - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
> - install; \
> - else \
> - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
> - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
> - fi
> -mostlyclean-generic:
> -
> -clean-generic:
> -
> -distclean-generic:
> - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
> - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
> -
> -maintainer-clean-generic:
> - @echo "This command is intended for maintainers to use"
> - @echo "it deletes files that may require special tools to rebuild."
> - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
> -clean: clean-am
> -
> -clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
> -
> -distclean: distclean-am
> - -rm -f Makefile
> -distclean-am: clean-am distclean-generic
> -
> -dvi: dvi-am
> -
> -dvi-am: $(DVIS)
> -
> -html: html-am
> -
> -html-am: $(HTMLS) html-local
> -
> -info: info-am
> -
> -info-am: $(INFO_DEPS) info-local
> -
> -install-data-am: install-info-am install-man
> -
> -install-dvi: install-dvi-am
> -
> -install-dvi-am: $(DVIS)
> - @$(NORMAL_INSTALL)
> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
> - done
> -install-exec-am:
> -
> -install-html: install-html-am
> -
> -install-html-am: $(HTMLS)
> - @$(NORMAL_INSTALL)
> - @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - $(am__strip_dir) \
> - d2=$$d$$p; \
> - if test -d "$$d2"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
> - $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
> - echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
> - $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
> - else \
> - list2="$$list2 $$d2"; \
> - fi; \
> - done; \
> - test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
> - done; }
> -install-info: install-info-am
> -
> -install-info-am: $(INFO_DEPS)
> - @$(NORMAL_INSTALL)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
> - fi; \
> - for file in $$list; do \
> - case $$file in \
> - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
> - esac; \
> - if test -f $$file; then d=.; else d=$(srcdir); fi; \
> - file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
> - for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
> - $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
> - if test -f $$ifile; then \
> - echo "$$ifile"; \
> - else : ; fi; \
> - done; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
> - @$(POST_INSTALL)
> - @if $(am__can_run_installinfo); then \
> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
> - install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
> - done; \
> - else : ; fi
> -install-man: install-man1
> -
> -install-pdf: install-pdf-am
> -
> -install-pdf-am: $(PDFS)
> - @$(NORMAL_INSTALL)
> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
> -install-ps: install-ps-am
> -
> -install-ps-am: $(PSS)
> - @$(NORMAL_INSTALL)
> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
> -installcheck-am:
> -
> -maintainer-clean: maintainer-clean-am
> - -rm -f Makefile
> -maintainer-clean-am: distclean-am maintainer-clean-aminfo \
> - maintainer-clean-generic
> -
> -mostlyclean: mostlyclean-am
> -
> -mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
> - mostlyclean-libtool
> -
> -pdf: pdf-am
> -
> -pdf-am: $(PDFS)
> -
> -ps: ps-am
> -
> -ps-am: $(PSS)
> -
> -uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
> - uninstall-man uninstall-pdf-am uninstall-ps-am
> -
> -uninstall-man: uninstall-man1
> -
> -.MAKE: install-am install-strip
> -
> -.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
> - clean-libtool cscopelist-am ctags-am dist-info distclean \
> - distclean-generic distclean-libtool distdir dvi dvi-am html \
> - html-am html-local info info-am info-local install install-am \
> - install-data install-data-am install-dvi install-dvi-am \
> - install-exec install-exec-am install-html install-html-am \
> - install-info install-info-am install-man install-man1 \
> - install-pdf install-pdf-am install-ps install-ps-am \
> - install-strip installcheck installcheck-am installdirs \
> - maintainer-clean maintainer-clean-aminfo \
> - maintainer-clean-generic mostlyclean mostlyclean-aminfo \
> - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
> - tags-am uninstall uninstall-am uninstall-dvi-am \
> - uninstall-html-am uninstall-info-am uninstall-man \
> - uninstall-man1 uninstall-pdf-am uninstall-ps-am
> -
> -.PRECIOUS: Makefile
> -
> -
> -# Man page generation from texinfo
> -addr2line.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> - $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f addr2line.pod
> -
> -ar.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> - $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f ar.pod
> -
> -dlltool.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> - $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f dlltool.pod
> -
> -nm.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> - $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f nm.pod
> -
> -objcopy.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> - $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f objcopy.pod
> -
> -objdump.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> - $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f objdump.pod
> -
> -ranlib.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> - $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f ranlib.pod
> -
> -readelf.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> - $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f readelf.pod
> -
> -size.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> - $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f size.pod
> -
> -strings.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> - $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f strings.pod
> -
> -strip.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> - $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f strip.pod
> -
> -elfedit.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> - $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f elfedit.pod
> -
> -windres.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> - $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f windres.pod
> -
> -windmc.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> - $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f windmc.pod
> -
> -cxxfilt.man: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> - $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
> -
> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
> - $(AM_V_GEN)if test -f cxxfilt.man; then \
> - man=cxxfilt.man; \
> - else \
> - man=$(srcdir)/cxxfilt.man; \
> - fi; \
> - sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> - -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> - > $(DEMANGLER_NAME).1
> -
> -html-local: binutils/index.html
> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
> - $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
> -
> -# Maintenance
> -
> -# We need it for the taz target in ../../Makefile.in.
> -info-local: $(MANS)
> -
> -# Tell versions [3.59,3.63) of GNU make to not export all variables.
> -# Otherwise a system limit (for SysV at least) may be exceeded.
> -.NOEXPORT:
> diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
> similarity index 77%
> rename from binutils/doc/Makefile.am
> rename to binutils/doc/local.mk
> index 90b238ddf8d9..687b3f65e6cb 100644
> --- a/binutils/doc/Makefile.am
> +++ b/binutils/doc/local.mk
> @@ -6,19 +6,17 @@
> # it under the terms of the GNU General Public License as published by
> # the Free Software Foundation; either version 3 of the License, or
> # (at your option) any later version.
> -#
> +#
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY; without even the implied warranty of
> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> # GNU General Public License for more details.
> -#
> +#
> # You should have received a copy of the GNU General Public License
> # along with this program; see the file COPYING3. If not see
> # <http://www.gnu.org/licenses/>.
> #
>
> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
> -
> # What version of the manual you want; "all" includes everything
> CONFIG=all
>
> @@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development Tools" \
>
> # List of man pages generated from binutils.texi
> man_MANS = \
> - addr2line.1 \
> - ar.1 \
> - dlltool.1 \
> - nm.1 \
> - objcopy.1 \
> - objdump.1 \
> - ranlib.1 \
> - readelf.1 \
> - size.1 \
> - strings.1 \
> - strip.1 \
> - elfedit.1 \
> - windres.1 \
> - windmc.1 \
> - $(DEMANGLER_NAME).1
> -
> -info_TEXINFOS = binutils.texi
> -binutils_TEXI = $(srcdir)/binutils.texi
> -
> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
> + %D%/addr2line.1 \
> + %D%/ar.1 \
> + %D%/dlltool.1 \
> + %D%/nm.1 \
> + %D%/objcopy.1 \
> + %D%/objdump.1 \
> + %D%/ranlib.1 \
> + %D%/readelf.1 \
> + %D%/size.1 \
> + %D%/strings.1 \
> + %D%/strip.1 \
> + %D%/elfedit.1 \
> + %D%/windres.1 \
> + %D%/windmc.1 \
> + %D%/$(DEMANGLER_NAME).1
> +
> +info_TEXINFOS = %D%/binutils.texi
> +binutils_TEXI = $(srcdir)/%D%/binutils.texi
> +
> +AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
> --no-split
> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
> +TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>
> # Man page generation from texinfo
> -addr2line.1: $(binutils_TEXI)
> +%D%/addr2line.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f addr2line.pod
>
> -ar.1: $(binutils_TEXI)
> +%D%/ar.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f ar.pod
>
> -dlltool.1: $(binutils_TEXI)
> +%D%/dlltool.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f dlltool.pod
>
> -nm.1: $(binutils_TEXI)
> +%D%/nm.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f nm.pod
>
> -objcopy.1: $(binutils_TEXI)
> +%D%/objcopy.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f objcopy.pod
>
> -objdump.1: $(binutils_TEXI)
> +%D%/objdump.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f objdump.pod
>
> -ranlib.1: $(binutils_TEXI)
> +%D%/ranlib.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f ranlib.pod
>
> -readelf.1: $(binutils_TEXI)
> +%D%/readelf.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f readelf.pod
>
> -size.1: $(binutils_TEXI)
> +%D%/size.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f size.pod
>
> -strings.1: $(binutils_TEXI)
> +%D%/strings.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f strings.pod
>
> -strip.1: $(binutils_TEXI)
> +%D%/strip.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f strip.pod
>
> -elfedit.1: $(binutils_TEXI)
> +%D%/elfedit.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f elfedit.pod
>
> -windres.1: $(binutils_TEXI)
> +%D%/windres.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f windres.pod
>
> -windmc.1: $(binutils_TEXI)
> +%D%/windmc.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f windmc.pod
>
> -cxxfilt.man: $(binutils_TEXI)
> +%D%/cxxfilt.man: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>
> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
> +MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
>
> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
> - $(AM_V_GEN)if test -f cxxfilt.man; then \
> - man=cxxfilt.man; \
> +%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
> + $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
> + man=%D%/cxxfilt.man; \
> else \
> - man=$(srcdir)/cxxfilt.man; \
> + man=$(srcdir)/%D%/cxxfilt.man; \
> fi; \
> sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> - > $(DEMANGLER_NAME).1
> + > %D%/$(DEMANGLER_NAME).1
>
> -html-local: binutils/index.html
> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
> +html-local: %D%/binutils/index.html
> +binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
> $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
> + --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
>
> # Maintenance
>
> -# We need it for the taz target in ../../Makefile.in.
> +# We need it for the taz target in ../Makefile.in.
> info-local: $(MANS)
>
More information about the Binutils
mailing list