This is the mail archive of the newlib@sourceware.org mailing list for the newlib project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 1/2] RISC-V: Add memcpy, memmove, memset and strcmp implementations optimized for size.


Hi Kito,

Thanks. I have attached the corrected patch.

Kito Cheng писал 2019-05-20 22:18:
Hi Ilia:

Just few minor comment:

1. There is some trailing white space in the patch, could you clean up that?

/home/users/kito/riscv-gnu-toolchain-workspace/riscv-gnu-toolchain/.git/modules/riscv-newlib/rebase-apply/patch:101:
trailing whitespace.
#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
/home/users/kito/riscv-gnu-toolchain-workspace/riscv-gnu-toolchain/.git/modules/riscv-newlib/rebase-apply/patch:117:
trailing whitespace.
2:
/home/users/kito/riscv-gnu-toolchain-workspace/riscv-gnu-toolchain/.git/modules/riscv-newlib/rebase-apply/patch:181:
trailing whitespace.
#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
/home/users/kito/riscv-gnu-toolchain-workspace/riscv-gnu-toolchain/.git/modules/riscv-newlib/rebase-apply/patch:205:
trailing whitespace.
2:
/home/users/kito/riscv-gnu-toolchain-workspace/riscv-gnu-toolchain/.git/modules/riscv-newlib/rebase-apply/patch:218:
trailing whitespace.
#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)

2. Patch conflict with current master branch, seems like you forgot
rebase with trunk before send patch.

error: patch failed: newlib/libc/machine/riscv/memcpy.c:9
error: newlib/libc/machine/riscv/memcpy.c: patch does not apply


On Tue, May 21, 2019 at 7:30 AM <ilia.diachkov@optimitech.com> wrote:

Thanks for you notice, Jim. Currently I cannot use git send-email, so I
try to provide the patches in attachment.

Jim Wilson писал 2019-05-20 16:09:
> On Fri, May 17, 2019 at 4:53 PM <ilia.diachkov@optimitech.com> wrote:
>> This patch adds implementations of memcpy, memmove, memset and strcmp
>> optimized for size. The changes have been tested in
>> riscv/riscv-gnu-toolchain by riscv-dejagnu with
>> riscv-sim.exp/riscv-sim-nano.exp.
>
> The patch was corrupted by the mailer.   Long lines were line wrapped.
> Lines that should have only a single space are now blank lines.  Line
> that should start with one space now have two.  Using git send-email
> should work better if you can use that.  Otherwise, you probably need
> to include the patches as attachments instead of trying to insert the
> text of the patch into an email.
>
> Optimitech is working on a contract for SiFive, so having the SiFive
> name in the copyright statements is OK.  Though I don't mind if the
> Optimitech name is in there too.
>
> I tested an earlier version of this (without the memmove-stub.c fix),
> and it gets a thumbs up from me, though I'm not an official newlib
> maintainer so can't approve it.
>
> Jim
From 49ac400f0a0bf4d9b976b5bdfa02152e16dd3dd4 Mon Sep 17 00:00:00 2001
From: Ilia Diachkov <ilia.diachkov@optimitech.com>
Date: Tue, 21 May 2019 11:56:54 +0300
Subject: [PATCH 1/2] RISC-V: Add memcpy, memmove, memset and strcmp
 implementations optimized for size.

---
 newlib/libc/machine/riscv/Makefile.am    |  3 ++-
 newlib/libc/machine/riscv/Makefile.in    | 23 +++++++++++++++++-
 newlib/libc/machine/riscv/memcpy-asm.S   | 32 +++++++++++++++++++++++++
 newlib/libc/machine/riscv/memcpy.c       |  5 ++++
 newlib/libc/machine/riscv/memmove-stub.c | 14 +++++++++++
 newlib/libc/machine/riscv/memmove.S      | 40 ++++++++++++++++++++++++++++++++
 newlib/libc/machine/riscv/memset.S       | 15 ++++++++++++
 newlib/libc/machine/riscv/strcmp.S       | 16 +++++++++++++
 8 files changed, 146 insertions(+), 2 deletions(-)
 create mode 100644 newlib/libc/machine/riscv/memcpy-asm.S
 create mode 100644 newlib/libc/machine/riscv/memmove-stub.c
 create mode 100644 newlib/libc/machine/riscv/memmove.S

diff --git a/newlib/libc/machine/riscv/Makefile.am b/newlib/libc/machine/riscv/Makefile.am
index 676df3e..017b4be 100644
--- a/newlib/libc/machine/riscv/Makefile.am
+++ b/newlib/libc/machine/riscv/Makefile.am
@@ -8,7 +8,8 @@ AM_CCASFLAGS = $(INCLUDES)
 
 noinst_LIBRARIES = lib.a
 
-lib_a_SOURCES = memset.S memcpy.c strlen.c strcpy.c strcmp.S setjmp.S ieeefp.c ffs.c
+lib_a_SOURCES = memmove.S memmove-stub.c memset.S memcpy-asm.S memcpy.c strlen.c \
+	strcpy.c strcmp.S setjmp.S ieeefp.c ffs.c
 lib_a_CCASFLAGS=$(AM_CCASFLAGS)
 lib_a_CFLAGS=$(AM_CFLAGS)
 
diff --git a/newlib/libc/machine/riscv/Makefile.in b/newlib/libc/machine/riscv/Makefile.in
index fd6d2ef..304dd35 100644
--- a/newlib/libc/machine/riscv/Makefile.in
+++ b/newlib/libc/machine/riscv/Makefile.in
@@ -70,6 +70,8 @@ ARFLAGS = cru
 lib_a_AR = $(AR) $(ARFLAGS)
 lib_a_LIBADD =
 am_lib_a_OBJECTS = lib_a-memset.$(OBJEXT) lib_a-memcpy.$(OBJEXT) \
+	lib_a-memcpy-asm.$(OBJEXT) \
+	lib_a-memmove.$(OBJEXT) lib_a-memmove-stub.$(OBJEXT) \
 	lib_a-strlen.$(OBJEXT) lib_a-strcpy.$(OBJEXT) \
 	lib_a-strcmp.$(OBJEXT) lib_a-setjmp.$(OBJEXT) \
 	lib_a-ieeefp.$(OBJEXT) lib_a-ffs.$(OBJEXT)
@@ -198,7 +200,8 @@ AUTOMAKE_OPTIONS = cygnus
 INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
 AM_CCASFLAGS = $(INCLUDES)
 noinst_LIBRARIES = lib.a
-lib_a_SOURCES = memset.S memcpy.c strlen.c strcpy.c strcmp.S setjmp.S ieeefp.c ffs.c
+lib_a_SOURCES = memcpy-asm.S memmove.S memmove-stub.c memset.S memcpy.c strlen.c \
+	strcpy.c strcmp.S setjmp.S ieeefp.c ffs.c
 lib_a_CCASFLAGS = $(AM_CCASFLAGS)
 lib_a_CFLAGS = $(AM_CFLAGS)
 ACLOCAL_AMFLAGS = -I ../../.. -I ../../../..
@@ -261,6 +264,18 @@ distclean-compile:
 .S.obj:
 	$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
+lib_a-memmove.o: memmove.S
+	$(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memmove.o `test -f 'memmove.S' || echo '$(srcdir)/'`memmove.S
+
+lib_a-memmove.obj: memmove.S
+	$(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memmove.obj `if test -f 'memmove.S'; then $(CYGPATH_W) 'memmove.S'; else $(CYGPATH_W) '$(srcdir)/memmove.S'; fi`
+
+lib_a-memcpy-asm.o: memcpy-asm.S
+	$(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memcpy-asm.o `test -f 'memcpy-asm.S' || echo '$(srcdir)/'`memcpy-asm.S
+
+lib_a-memcpy-asm.obj: memcpy-asm.S
+	$(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memcpy-asm.obj `if test -f 'memcpy-asm.S'; then $(CYGPATH_W) 'memcpy-asm.S'; else $(CYGPATH_W) '$(srcdir)/memcpy-asm.S'; fi`
+
 lib_a-memset.o: memset.S
 	$(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memset.o `test -f 'memset.S' || echo '$(srcdir)/'`memset.S
 
@@ -285,6 +300,12 @@ lib_a-setjmp.obj: setjmp.S
 .c.obj:
 	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
+lib_a-memmove-stub.o: memmove-stub.c
+	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-memmove-stub.o `test -f 'memmove-stub.c' || echo '$(srcdir)/'`memmove-stub.c
+
+lib_a-memmove-stub.obj: memmove-stub.c
+	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-memmove-stub.obj `if test -f 'memmove-stub.c'; then $(CYGPATH_W) 'memmove-stub.c'; else $(CYGPATH_W) '$(srcdir)/memmove-stub.c'; fi`
+
 lib_a-memcpy.o: memcpy.c
 	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-memcpy.o `test -f 'memcpy.c' || echo '$(srcdir)/'`memcpy.c
 
diff --git a/newlib/libc/machine/riscv/memcpy-asm.S b/newlib/libc/machine/riscv/memcpy-asm.S
new file mode 100644
index 0000000..5571e47
--- /dev/null
+++ b/newlib/libc/machine/riscv/memcpy-asm.S
@@ -0,0 +1,32 @@
+/* Copyright (c) 2019  SiFive Inc. All rights reserved.
+
+   This copyrighted material is made available to anyone wishing to use,
+   modify, copy, or redistribute it subject to the terms and conditions
+   of the FreeBSD License.   This program is distributed in the hope that
+   it will be useful, but WITHOUT ANY WARRANTY expressed or implied,
+   including the implied warranties of MERCHANTABILITY or FITNESS FOR
+   A PARTICULAR PURPOSE.  A copy of this license is available at
+   http://www.opensource.org/licenses.
+*/
+
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+.text
+.global memcpy
+.type	memcpy, @function
+memcpy:
+  mv t1, a0
+  beqz a2, 2f
+
+1:
+  lb t2, 0(a1)
+  sb t2, 0(t1)
+  add   a2, a2, -1
+  add   t1, t1, 1
+  add   a1, a1, 1
+  bnez a2, 1b
+
+2:
+  ret
+
+  .size	memcpy, .-memcpy
+#endif
diff --git a/newlib/libc/machine/riscv/memcpy.c b/newlib/libc/machine/riscv/memcpy.c
index a0ab78a..07e8e00 100644
--- a/newlib/libc/machine/riscv/memcpy.c
+++ b/newlib/libc/machine/riscv/memcpy.c
@@ -9,6 +9,10 @@
    http://www.opensource.org/licenses.
 */
 
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+//memcpy defined in memcpy-asm.S
+#else
+
 #include <string.h>
 #include <stdint.h>
 #include "../../string/local.h"
@@ -81,3 +85,4 @@ small:
     goto small;
   return aa;
 }
+#endif
diff --git a/newlib/libc/machine/riscv/memmove-stub.c b/newlib/libc/machine/riscv/memmove-stub.c
new file mode 100644
index 0000000..d882e46
--- /dev/null
+++ b/newlib/libc/machine/riscv/memmove-stub.c
@@ -0,0 +1,14 @@
+/* Copyright (c) 2019  SiFive Inc. All rights reserved.
+
+   This copyrighted material is made available to anyone wishing to use,
+   modify, copy, or redistribute it subject to the terms and conditions
+   of the FreeBSD License.   This program is distributed in the hope that
+   it will be useful, but WITHOUT ANY WARRANTY expressed or implied,
+   including the implied warranties of MERCHANTABILITY or FITNESS FOR
+   A PARTICULAR PURPOSE.  A copy of this license is available at
+   http://www.opensource.org/licenses.
+*/
+
+#if !defined(PREFER_SIZE_OVER_SPEED) && !defined(__OPTIMIZE_SIZE__)
+#include "../../string/memmove.c"
+#endif
diff --git a/newlib/libc/machine/riscv/memmove.S b/newlib/libc/machine/riscv/memmove.S
new file mode 100644
index 0000000..66d9cd4
--- /dev/null
+++ b/newlib/libc/machine/riscv/memmove.S
@@ -0,0 +1,40 @@
+/* Copyright (c) 2019  SiFive Inc. All rights reserved.
+
+   This copyrighted material is made available to anyone wishing to use,
+   modify, copy, or redistribute it subject to the terms and conditions
+   of the FreeBSD License.   This program is distributed in the hope that
+   it will be useful, but WITHOUT ANY WARRANTY expressed or implied,
+   including the implied warranties of MERCHANTABILITY or FITNESS FOR
+   A PARTICULAR PURPOSE.  A copy of this license is available at
+   http://www.opensource.org/licenses.
+*/
+
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+.text
+.global memmove
+.type	memmove, @function
+memmove:
+  beqz a2, 2f
+
+  mv t1, a0
+  li a3, 1
+  bgtu  a1, a0, 1f
+
+  li a3, -1
+  addi  a4, a2 , -1
+  add t1, t1, a4
+  add a1, a1, a4
+
+1:
+  lb t2, 0(a1)
+  sb t2, 0(t1)
+  add   a2, a2, -1
+  add   t1, t1, a3
+  add   a1, a1, a3
+  bnez a2, 1b
+
+2:
+  ret
+
+  .size	memmove, .-memmove
+#endif
diff --git a/newlib/libc/machine/riscv/memset.S b/newlib/libc/machine/riscv/memset.S
index 337ed53..a717ae7 100644
--- a/newlib/libc/machine/riscv/memset.S
+++ b/newlib/libc/machine/riscv/memset.S
@@ -13,6 +13,20 @@
 .global memset
 .type	memset, @function
 memset:
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+  mv t1, a0
+  beqz a2, 2f
+
+1:
+  sb a1, 0(t1)
+  add   a2, a2, -1
+  add   t1, t1, 1
+  bnez a2, 1b
+
+2:
+  ret
+
+#else
   li t1, 15
   move a4, a0
   bleu a2, t1, .Ltiny
@@ -95,4 +109,5 @@ memset:
   add a2, a2, a5
   bleu a2, t1, .Ltiny
   j .Laligned
+#endif
   .size	memset, .-memset
diff --git a/newlib/libc/machine/riscv/strcmp.S b/newlib/libc/machine/riscv/strcmp.S
index 71c0853..eaf6d4b 100644
--- a/newlib/libc/machine/riscv/strcmp.S
+++ b/newlib/libc/machine/riscv/strcmp.S
@@ -19,6 +19,21 @@
 .globl strcmp
 .type  strcmp, @function
 strcmp:
+#if defined(PREFER_SIZE_OVER_SPEED) || defined(__OPTIMIZE_SIZE__)
+1:
+  lbu   a2, 0(a0)
+  lbu   a3, 0(a1)
+  add   a0, a0, 1
+  add   a1, a1, 1
+  bne   a2, a3, 2f
+  bnez  a2, 1b
+
+2:
+  sub   a0, a2, a3
+  ret
+
+.size	strcmp, .-strcmp
+#else
   or    a4, a0, a1
   li    t2, -1
   and   a4, a4, SZREG-1
@@ -146,3 +161,4 @@ strcmp:
 mask:
 .dword 0x7f7f7f7f7f7f7f7f
 #endif
+#endif
-- 
1.8.3.1


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]