This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH 1/6] gdb/testsuite: Better detection of auto-response at y/n prompts
* Simon Marchi <simon.marchi@ericsson.com> [2019-01-02 21:48:06 +0000]:
> On 2019-01-01 5:45 p.m., Andrew Burgess wrote:
> > I noticed that when running this test:
> >
> > make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"
> >
> > I would occasionally see some UNRESOLVED test results like this:
> >
> > (gdb)
> > PASS: gdb.mi/mi-break.exp: mi-mode=separate: breakpoint at main
> > Expecting: ^(kill[
> > ]+)?(.*[
> > ]+[(]gdb[)]
> > [ ]*)
> > kill
> > &"kill\n"
> > ~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n"
> > =thread-group-exited,id="i1"
> > ERROR: Got interactive prompt.
> > UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
> >
> > The problem appears to be that the expect buffer fills up to include
> > the '(y or n)' prompt without including the following lines.
> >
> > The pattern supplied by the outer test script is looking for the
> > following lines. As the following lines are not present then expect
> > matches on the interactive prompt case rather than the case for the
> > user supplied pattern.
> >
> > The problem with this is that we are not really at an interactive
> > prompt, GDB is providing an answer for us and then moving on. When I
> > examine a successful run of the test the output from GDB is identical,
> > the only difference is where expect happens to buffer the output from
> > GDB.
> >
> > This patch introduces a second check inside the 'y or n' prompt case,
> > which gives expect a chance to refill its buffers and catches the
> > 'answered Y; input ...' text.
> >
> > This second check is on a short 1 second timeout, I'm currently
> > assuming that the auto-answer text will either already be in expect,
> > or is waiting to be read in. If after 1 second the auto-answer text
> > is not seen then we assume that GDB really is waiting at an
> > interactive prompt.
> >
> > With this patch in place I can now leave the following loop running
> > indefinitely, where before it would fail usually after ~10
> > iterations.
>
> For me it fails consistently the way you describe.
>
> > diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
> > index d193592a843..48ea45d62c7 100644
> > --- a/gdb/testsuite/lib/mi-support.exp
> > +++ b/gdb/testsuite/lib/mi-support.exp
> > @@ -834,9 +834,24 @@ proc mi_gdb_test { args } {
> > fail "$message"
> > }
> > -re "\\(y or n\\) " {
> > - send_gdb "n\n"
> > - perror "Got interactive prompt."
> > - fail "$message"
> > + # If the expect buffer just happens to fill up to the 'y
> > + # or n' prompt then we can end up in this case, even
> > + # though GDB will automatically provide a response for us.
> > + # We give expect another chance here to look for the auto
> > + # answer text before declaring a fail.
> > + set auto_response_seen 0
> > + gdb_expect 1 {
> > + -re ".answered Y; input not from terminal." {
> > + set auto_response_seen 1
> > + }
> > + }
> > + if { ! $auto_response_seen } {
> > + send_gdb "n\n"
> > + perror "Got interactive prompt."
> > + fail "$message"
> > + } else {
> > + exp_continue
> > + }
> > }
> > eof {
> > perror "Process no longer exists"
>
> Do we need this stanza at all? I understand that it can save some time (avoid having
> to wait for the timeout) if the MI interpreter suddenly starts asking interactive
> "y or n" questions (which it should not do), but since it's causing this kind of trouble,
> maybe we can just get rid of it?
I don't see any real reason to keep it. I tried deleting it and no
tests seem to regress, and the previously unstable test is now stable.
Is this OK to apply?
Thanks,
Andrew
--
gdb/testsuite: Remove interactive prompt case from mi_gdb_test
I noticed that when running this test:
make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"
I would occasionally see some UNRESOLVED test results like this:
(gdb)
PASS: gdb.mi/mi-break.exp: mi-mode=separate: breakpoint at main
Expecting: ^(kill[
]+)?(.*[
]+[(]gdb[)]
[ ]*)
kill
&"kill\n"
~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n"
=thread-group-exited,id="i1"
ERROR: Got interactive prompt.
UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
The problem appears to be that the expect buffer fills up to include
the '(y or n)' prompt without including the following lines.
The pattern supplied by the outer test script is looking for the
following lines. As the following lines are not present then expect
matches on the interactive prompt case rather than the case for the
user supplied pattern.
The problem with this is that we are not really at an interactive
prompt, GDB is providing an answer for us and then moving on. When I
examine a successful run of the test the output from GDB is identical,
the only difference is where expect happens to buffer the output from
GDB.
This patch remove all special handling of the interactive prompt
case. This means that if we ever break GDB and start seeing an
unexpected interactive prompt then tests will rely on a timeout to
fail, instead of having dedicated interactive prompt detection, but
this solves the problem that an auto-answered prompt looks very
similar to an interactive prompt.
With this patch in place I can now leave the following loop running
indefinitely, where before it would fail usually after ~10
iterations.
while make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"; \
do /bin/true; \
done
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_gdb_test): Remove interactive prompt
case.
---
gdb/testsuite/ChangeLog | 5 +++++
gdb/testsuite/lib/mi-support.exp | 5 -----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index d193592a843..a58c4f6e119 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -832,11 +832,6 @@ proc mi_gdb_test { args } {
send_gdb "\n"
perror "Window too small."
fail "$message"
- }
- -re "\\(y or n\\) " {
- send_gdb "n\n"
- perror "Got interactive prompt."
- fail "$message"
}
eof {
perror "Process no longer exists"
--
2.14.5