This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[RFC v2][3/3] Target FP printing: Use floatformat_to_string in tdep code
- From: "Ulrich Weigand" <uweigand at de dot ibm dot com>
- To: gdb-patches at sourceware dot org
- Date: Thu, 5 Oct 2017 19:31:36 +0200 (CEST)
- Subject: [RFC v2][3/3] Target FP printing: Use floatformat_to_string in tdep code
- Authentication-results: sourceware.org; auth=none
[RFC v2][3/3] Target FP printing: Use floatformat_to_string in tdep code
A few tdep files use target-specific printing routines to output values in
the floating-point registers. To get rid of host floating-point code,
this patch changes them to use floatformat_to_string instead.
No functional change intended, the resulting output should look the same.
Bye,
Ulrich
ChangeLog:
* i387-tdep.c (print_i387_value): Use floatformat_to_string.
* sh64-tdep.c (sh64_do_fp_register): Likewise.
* mips-tdep.c (mips_print_fp_register): Likewise.
Index: binutils-gdb/gdb/i387-tdep.c
===================================================================
--- binutils-gdb.orig/gdb/i387-tdep.c
+++ binutils-gdb/gdb/i387-tdep.c
@@ -36,23 +36,14 @@ static void
print_i387_value (struct gdbarch *gdbarch,
const gdb_byte *raw, struct ui_file *file)
{
- DOUBLEST value;
-
- /* Using extract_typed_floating here might affect the representation
- of certain numbers such as NaNs, even if GDB is running natively.
- This is fine since our caller already detects such special
- numbers and we print the hexadecimal representation anyway. */
- value = extract_typed_floating (raw, i387_ext_type (gdbarch));
-
/* We try to print 19 digits. The last digit may or may not contain
garbage, but we'd better print one too many. We need enough room
to print the value, 1 position for the sign, 1 for the decimal
point, 19 for the digits and 6 for the exponent adds up to 27. */
-#ifdef PRINTF_HAS_LONG_DOUBLE
- fprintf_filtered (file, " %-+27.19Lg", (long double) value);
-#else
- fprintf_filtered (file, " %-+27.19g", (double) value);
-#endif
+ const struct floatformat *fmt
+ = floatformat_from_type (i387_ext_type (gdbarch));
+ std::string str = floatformat_to_string (fmt, raw, " %-+27.19g");
+ fprintf_filtered (file, "%s", str.c_str ());
}
/* Print the classification for the register contents RAW. */
Index: binutils-gdb/gdb/sh64-tdep.c
===================================================================
--- binutils-gdb.orig/gdb/sh64-tdep.c
+++ binutils-gdb/gdb/sh64-tdep.c
@@ -1915,8 +1915,6 @@ sh64_do_fp_register (struct gdbarch *gdb
struct frame_info *frame, int regnum)
{ /* Do values for FP (float) regs. */
unsigned char *raw_buffer;
- double flt; /* Double extracted from raw hex data. */
- int inv;
/* Allocate space for the float. */
raw_buffer = (unsigned char *)
@@ -1927,20 +1925,16 @@ sh64_do_fp_register (struct gdbarch *gdb
error (_("can't read register %d (%s)"),
regnum, gdbarch_register_name (gdbarch, regnum));
- /* Get the register as a number. */
- flt = unpack_double (builtin_type (gdbarch)->builtin_float,
- raw_buffer, &inv);
-
/* Print the name and some spaces. */
fputs_filtered (gdbarch_register_name (gdbarch, regnum), file);
print_spaces_filtered (15 - strlen (gdbarch_register_name
(gdbarch, regnum)), file);
/* Print the value. */
- if (inv)
- fprintf_filtered (file, "<invalid float>");
- else
- fprintf_filtered (file, "%-10.9g", flt);
+ const struct floatformat *fmt
+ = floatformat_from_type (builtin_type (gdbarch)->builtin_float);
+ std::string str = floatformat_to_string (fmt, raw_buffer, "%-10.9g");
+ fprintf_filtered (file, "%s", str.c_str ());
/* Print the fp register as hex. */
fprintf_filtered (file, "\t(raw ");
Index: binutils-gdb/gdb/mips-tdep.c
===================================================================
--- binutils-gdb.orig/gdb/mips-tdep.c
+++ binutils-gdb/gdb/mips-tdep.c
@@ -6256,8 +6256,12 @@ mips_print_fp_register (struct ui_file *
{ /* Do values for FP (float) regs. */
struct gdbarch *gdbarch = get_frame_arch (frame);
gdb_byte *raw_buffer;
- double doub, flt1; /* Doubles extracted from raw hex data. */
- int inv1, inv2;
+ std::string flt_str, dbl_str;
+
+ const struct floatformat *flt_fmt
+ = floatformat_from_type (builtin_type (gdbarch)->builtin_float);
+ const struct floatformat *dbl_fmt
+ = floatformat_from_type (builtin_type (gdbarch)->builtin_double);
raw_buffer
= ((gdb_byte *)
@@ -6275,31 +6279,21 @@ mips_print_fp_register (struct ui_file *
/* 4-byte registers: Print hex and floating. Also print even
numbered registers as doubles. */
mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
- raw_buffer, &inv1);
+ flt_str = floatformat_to_string (flt_fmt, raw_buffer, "%-17.9g");
get_formatted_print_options (&opts, 'x');
print_scalar_formatted (raw_buffer,
builtin_type (gdbarch)->builtin_uint32,
&opts, 'w', file);
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, " <invalid float> ");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
+ fprintf_filtered (file, " flt: %s", flt_str.c_str ());
if ((regnum - gdbarch_num_regs (gdbarch)) % 2 == 0)
{
mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (builtin_type (gdbarch)->builtin_double,
- raw_buffer, &inv2);
+ dbl_str = floatformat_to_string (dbl_fmt, raw_buffer, "%-24.17g");
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
+ fprintf_filtered (file, " dbl: %s", dbl_str.c_str ());
}
}
else
@@ -6308,29 +6302,18 @@ mips_print_fp_register (struct ui_file *
/* Eight byte registers: print each one as hex, float and double. */
mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (builtin_type (gdbarch)->builtin_float,
- raw_buffer, &inv1);
+ flt_str = floatformat_to_string (flt_fmt, raw_buffer, "%-17.9g");
mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (builtin_type (gdbarch)->builtin_double,
- raw_buffer, &inv2);
+ dbl_str = floatformat_to_string (dbl_fmt, raw_buffer, "%-24.17g");
get_formatted_print_options (&opts, 'x');
print_scalar_formatted (raw_buffer,
builtin_type (gdbarch)->builtin_uint64,
&opts, 'g', file);
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, "<invalid float>");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
-
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
+ fprintf_filtered (file, " flt: %s", flt_str.c_str ());
+ fprintf_filtered (file, " dbl: %s", dbl_str.c_str ());
}
}