This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 06/16] Eliminate literal line numbers in foll-exec.exp
- From: Andreas Arnez <arnez at linux dot vnet dot ibm dot com>
- To: gdb-patches at sourceware dot org
- Date: Wed, 29 Oct 2014 17:00:21 +0100
- Subject: [PATCH 06/16] Eliminate literal line numbers in foll-exec.exp
- Authentication-results: sourceware.org; auth=none
- References: <1414597859-12523-1-git-send-email-arnez at linux dot vnet dot ibm dot com>
Remove literal line numbers from the regexps in foll-exec.exp. Add
appropriate eye-catchers to foll-exec.c and execd-proc.c and refer to
those instead.
gdb/testsuite/ChangeLog:
* gdb.base/execd-prog.c: Add eye-catchers.
* gdb.base/foll-exec.c: Likewise.
* gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
line numbers.
---
gdb/testsuite/gdb.base/execd-prog.c | 2 +-
gdb/testsuite/gdb.base/foll-exec.c | 4 ++--
gdb/testsuite/gdb.base/foll-exec.exp | 37 +++++++++++++++++++-----------------
3 files changed, 23 insertions(+), 20 deletions(-)
diff --git a/gdb/testsuite/gdb.base/execd-prog.c b/gdb/testsuite/gdb.base/execd-prog.c
index 5469f65..5435f7d 100644
--- a/gdb/testsuite/gdb.base/execd-prog.c
+++ b/gdb/testsuite/gdb.base/execd-prog.c
@@ -20,7 +20,7 @@ main (argc, argv)
should not be able to see that other definition of local_j
after we are exec'd.
*/
- int local_j = argc;
+ int local_j = argc; /* after-exec */
char * s;
printf ("Hello from execd-prog...\n");
diff --git a/gdb/testsuite/gdb.base/foll-exec.c b/gdb/testsuite/gdb.base/foll-exec.c
index 78c1cda..5b0d9c5 100644
--- a/gdb/testsuite/gdb.base/foll-exec.c
+++ b/gdb/testsuite/gdb.base/foll-exec.c
@@ -24,7 +24,7 @@ main ()
printf ("foll-exec is about to execl(execd-prog)...\n");
- execl (BASEDIR "/execd-prog",
+ execl (BASEDIR "/execd-prog", /* tbreak-execl */
BASEDIR "/execd-prog",
"execl arg1 from foll-exec",
"execl arg2 from foll-exec",
@@ -38,6 +38,6 @@ main ()
printf ("foll-exec is about to execv(execd-prog)...\n");
- execv (BASEDIR "/execd-prog", argv);
+ execv (BASEDIR "/execd-prog", argv); /* tbreak-execv */
}
}
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index c1b1354..e1b0a59 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -119,7 +119,7 @@ proc do_exec_tests {} {
#
send_gdb "next 3\n"
gdb_expect {
- -re "20.*execlp.*$gdb_prompt $"\
+ -re ".*execlp \\(.*$gdb_prompt $"\
{pass "step to exec call"}
-re "$gdb_prompt $" {fail "step to exec call"}
timeout {fail "(timeout) step to exec call"}
@@ -149,9 +149,10 @@ proc do_exec_tests {} {
# Try stepping through an execlp call, without catching it.
# We should stop in execd-program, at its first statement.
#
+ set execd_line [gdb_get_line_number "after-exec" $srcfile2]
send_gdb "next\n"
gdb_expect {
- -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:23.*int local_j = argc;.*$gdb_prompt $"\
+ -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\
{pass "step through execlp call"}
-re "$gdb_prompt $" {fail "step through execlp call"}
timeout {fail "(timeout) step through execlp call"}
@@ -162,7 +163,7 @@ proc do_exec_tests {} {
#
send_gdb "next\n"
gdb_expect {
- -re "26.*printf.*$gdb_prompt $"\
+ -re "printf \\(.Hello .*$gdb_prompt $"\
{pass "step after execlp call"}
-re "$gdb_prompt $" {fail "step after execlp call"}
timeout {fail "(timeout) step after execlp call"}
@@ -256,7 +257,7 @@ proc do_exec_tests {} {
#
send_gdb "continue\n"
gdb_expect {
- -re ".*${srcfile2}:23.*$gdb_prompt $"\
+ -re ".*${srcfile2}:${execd_line}.*$gdb_prompt $"\
{pass "continue after hit catch exec"}
-re "$gdb_prompt $" {fail "continue after hit catch exec"}
timeout {fail "(timeout) continue after hit catch exec"}
@@ -276,16 +277,17 @@ proc do_exec_tests {} {
# Verify that we can follow through follow an execl()
# call. (We must jump around earlier exec* calls.)
#
- send_gdb "tbreak 27\n"
+ set tbreak_line [gdb_get_line_number "tbreak-execl" $srcfile]
+ send_gdb "tbreak ${tbreak_line}\n"
gdb_expect {
- -re "Temporary breakpoint .*file .*${srcfile}, line 27.*$gdb_prompt $"\
+ -re "Temporary breakpoint .*file .*${srcfile}, line ${tbreak_line}.*$gdb_prompt $"\
{pass "prepare to jump to execl call"}
-re "$gdb_prompt $" {fail "prepare to jump to execl call"}
timeout {fail "(timeout) prepare to jump to execl call"}
}
- send_gdb "jump 27\n"
+ send_gdb "jump ${tbreak_line}\n"
gdb_expect {
- -re "main.* at .*${srcfile}:27.*$gdb_prompt $"\
+ -re "main.* at .*${srcfile}:${tbreak_line}.*$gdb_prompt $"\
{pass "jump to execl call"}
-re "$gdb_prompt $" {fail "jump to execl call"}
timeout {fail "(timeout) jump to execl call"}
@@ -298,14 +300,14 @@ proc do_exec_tests {} {
#
send_gdb "next 2\n"
gdb_expect {
- -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:23.*int local_j = argc;.*$gdb_prompt $"\
+ -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\
{pass "step through execl call"}
-re "$gdb_prompt $" {fail "step through execl call"}
timeout {fail "(timeout) step through execl call"}
}
send_gdb "next\n"
gdb_expect {
- -re "26.*printf.*$gdb_prompt $"\
+ -re "printf \\(.Hello .*$gdb_prompt $"\
{pass "step after execl call"}
-re "$gdb_prompt $" {fail "step after execl call"}
timeout {fail "(timeout) step after execl call"}
@@ -336,30 +338,31 @@ proc do_exec_tests {} {
# Verify that we can follow through follow an execv()
# call. (We must jump around earlier exec* calls.)
#
- send_gdb "tbreak 41\n"
+ set tbreak_line [gdb_get_line_number "tbreak-execv"]
+ send_gdb "tbreak ${tbreak_line}\n"
gdb_expect {
- -re "Temporary breakpoint .*file .*${srcfile}, line 41.*$gdb_prompt $"\
+ -re "Temporary breakpoint .*file .*${srcfile}, line ${tbreak_line}.*$gdb_prompt $"\
{pass "prepare to jump to execv call"}
-re "$gdb_prompt $" {fail "prepare to jump to execv call"}
timeout {fail "(timeout) prepare to jump to execv call"}
}
- send_gdb "jump 41\n"
+ send_gdb "jump ${tbreak_line}\n"
gdb_expect {
- -re "main.* at .*${srcfile}:41.*$gdb_prompt $"\
+ -re "main.* at .*${srcfile}:${tbreak_line}.*$gdb_prompt $"\
{pass "jump to execv call"}
-re "$gdb_prompt $" {fail "jump to execv call"}
timeout {fail "(timeout) jump to execv call"}
}
send_gdb "next\n"
gdb_expect {
- -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:23.*int local_j = argc;.*$gdb_prompt $"\
+ -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\
{pass "step through execv call"}
-re "$gdb_prompt $" {fail "step through execv call"}
timeout {fail "(timeout) step through execv call"}
}
send_gdb "next\n"
gdb_expect {
- -re "26.*printf.*$gdb_prompt $"\
+ -re "printf \\(.Hello .*$gdb_prompt $"\
{pass "step after execv call"}
-re "$gdb_prompt $" {fail "step after execv call"}
timeout {fail "(timeout) step after execv call"}
@@ -393,7 +396,7 @@ proc do_exec_tests {} {
#
send_gdb "continue\n"
gdb_expect {
- -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:23.*int local_j = argc;.*$gdb_prompt $"\
+ -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\
{pass "continue through exec"}
-re "$gdb_prompt $" {fail "continue through exec"}
timeout {fail "(timeout) continue through exec"}
--
1.8.4.2