This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 05/16] Eliminate literal line numbers in ending-run.exp
- From: Andreas Arnez <arnez at linux dot vnet dot ibm dot com>
- To: gdb-patches at sourceware dot org
- Date: Wed, 29 Oct 2014 17:00:20 +0100
- Subject: [PATCH 05/16] Eliminate literal line numbers in ending-run.exp
- Authentication-results: sourceware.org; auth=none
- References: <1414597859-12523-1-git-send-email-arnez at linux dot vnet dot ibm dot com>
Remove literal line numbers from the regexps in ending-run.exp. Add
appropriate eye-catchers to ending-run.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/ending-run.c: Add eye-catchers.
* gdb.base/ending-run.exp: Refer to eye-catchers instead of
literal line numbers.
---
gdb/testsuite/gdb.base/ending-run.c | 4 ++--
gdb/testsuite/gdb.base/ending-run.exp | 38 +++++++++++++++++++----------------
2 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/gdb/testsuite/gdb.base/ending-run.c b/gdb/testsuite/gdb.base/ending-run.c
index 8c67706..d857cf8 100644
--- a/gdb/testsuite/gdb.base/ending-run.c
+++ b/gdb/testsuite/gdb.base/ending-run.c
@@ -11,7 +11,7 @@ int callee( x )
int x;
#endif
{
- int y = x * x;
+ int y = x * x; /* -break1- */
return (y - 2);
}
@@ -28,6 +28,6 @@ int main()
printf( "%d ", callee( i ));
fflush (stdout);
}
- printf( " Goodbye!\n" ); fflush (stdout);
+ printf( " Goodbye!\n" ); fflush (stdout); /* -break2- */
return 0;
}
diff --git a/gdb/testsuite/gdb.base/ending-run.exp b/gdb/testsuite/gdb.base/ending-run.exp
index 173cfd4..dc54d10 100644
--- a/gdb/testsuite/gdb.base/ending-run.exp
+++ b/gdb/testsuite/gdb.base/ending-run.exp
@@ -21,7 +21,9 @@
# ending-run.exp -- Expect script to test ending a test run in gdb
-if { [prepare_for_testing ending-run.exp ending-run] } {
+standard_testfile
+
+if { [prepare_for_testing ${testfile}.exp $testfile] } {
return -1
}
remote_exec build "rm -f core"
@@ -35,26 +37,28 @@ remote_exec build "rm -f core"
gdb_test "b ending-run.c:1" ".*Breakpoint.*ending-run.c, line 1.*" \
"bpt at line before routine"
-gdb_test "b ending-run.c:14" \
- ".*Note.*also.*Breakpoint 2.*ending-run.c, line 14.*" \
- "b ending-run.c:14, one"
+set break1_line [gdb_get_line_number "-break1-"]
+gdb_test "b ending-run.c:$break1_line" \
+ ".*Note.*also.*Breakpoint 2.*ending-run.c, line $break1_line.*" \
+ "b ending-run.c:$break1_line, one"
# Set up to go to the next-to-last line of the program
#
-gdb_test "b ending-run.c:31" ".*Breakpoint 3.*ending-run.c, line 31.*"
+set break2_line [gdb_get_line_number "-break2-"]
+gdb_test "b ending-run.c:$break2_line" ".*Breakpoint 3.*ending-run.c, line $break2_line.*"
# Expect to hit the bp at line "1", but symbolize this
# as line "13". Then try to clear it--this should work.
#
gdb_run_cmd
-gdb_test "" ".*Breakpoint.*1.*callee.*14.*" "run"
+gdb_test "" ".*Breakpoint.*1.*callee.*$break1_line.*" "run"
gdb_test "cle" ".*Deleted breakpoints 1 2.*" "clear worked"
gdb_test_multiple "i b" "cleared bp at line before routine" {
-re ".* breakpoint .* breakpoint .*$gdb_prompt $" {
fail "cleared bp at line before routine"
}
- -re ".*3.*main.*31.*$gdb_prompt $" {
+ -re ".*3.*main.*$break2_line.*$gdb_prompt $" {
pass "cleared bp at line before routine"
}
}
@@ -62,15 +66,15 @@ gdb_test_multiple "i b" "cleared bp at line before routine" {
# Test some other "clear" combinations
#
gdb_test "b ending-run.c:1" ".*Breakpoint.*4.*"
-gdb_test "b ending-run.c:14" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:14, two"
-gdb_test "cle ending-run.c:14" \
+gdb_test "b ending-run.c:$break1_line" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:$break1_line, two"
+gdb_test "cle ending-run.c:$break1_line" \
".*Deleted breakpoint 5.*" "Cleared 2 by line"
-gdb_test_multiple "info line ending-run.c:14" "" {
+gdb_test_multiple "info line ending-run.c:$break1_line" "" {
-re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" {
set line_nine $expect_out(1,string)
- gdb_test "b ending-run.c:14" ".*Breakpoint 6.*ending-run.c, line 14.*"
- gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint 7.*" "Breakpoint 7 at *ending-run.c:14"
+ gdb_test "b ending-run.c:$break1_line" ".*Breakpoint 6.*ending-run.c, line $break1_line.*"
+ gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint 7.*" "Breakpoint 7 at *ending-run.c:$break1_line"
gdb_test "cle" ".*Deleted breakpoints 4 6 7.*" "Clear 2 by default"
}
-re ".*$gdb_prompt $" {
@@ -82,7 +86,7 @@ gdb_test_multiple "i b" "all set to continue" {
-re ".* breakpoint .* breakpoint .*$gdb_prompt $" {
fail "all set to continue (didn't clear bps)"
}
- -re ".*3.*main.*31.*$gdb_prompt $" {
+ -re ".*3.*main.*$break2_line.*$gdb_prompt $" {
pass "all set to continue"
}
-re ".*$gdb_prompt $" {
@@ -95,13 +99,13 @@ gdb_test_multiple "i b" "all set to continue" {
# is output from the program.
#
if ![gdb_skip_stdio_test "cont"] {
- gdb_test "cont" ".*1 2 7 14 23 34 47 62 79.*Breakpoint.*31.*"
+ gdb_test "cont" ".*1 2 7 14 23 34 47 62 79.*Breakpoint.*$break2_line.*"
} else {
- gdb_test "cont" ".*Breakpoint.*31.*"
+ gdb_test "cont" ".*Breakpoint.*$break2_line.*"
}
if ![gdb_skip_stdio_test "Step to return"] {
- gdb_test "next" ".*Goodbye!.*32.*" \
+ gdb_test "next" ".*Goodbye!.*[expr {$break2_line + 1}].*" \
"Step to return"
} else {
gdb_test "next" ".*" ""
@@ -113,7 +117,7 @@ set program_exited 0
set nexted 0
gdb_test_multiple "next" "step out of main" {
- -re "33\[ \t\]+\}.*$gdb_prompt $" {
+ -re "[expr {$break2_line + 2}]\[ \t\]+\}.*$gdb_prompt $" {
# sometimes we stop at the closing brace, if so, do another next
if { $nexted } {
fail "step out of main"
--
1.8.4.2