This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: how to add ethernet support for SNDS
Roland Caßebohm wrote:
On Freitag, 20. Februar 2004 05:46, Jonathan Larmour wrote:
However, just to be clear, do you know that someone still needs to port the
KS32C5000 driver to the SNDS platform? There's a bit of glue required
before it will work.
As I know the ks32c5000 driver works as it is with the SNDS100 board.
To get a network ready RedBoot for SNDS100 you only have to add the
ks32c5000 ethernet package and the generic ethernet package.
As I can remember is the default phy device the right one, so it
should work.
I stand corrected. Because it was shared between two platform ports I
assumed it was going to require per-port customisation, but I forgot it was
onchip and therefore would be the same (other than potentially the PHY as
you say). Fair enough!
In that case, I wonder why it isn't listed in ecos.db for the snds100 target.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
>>>>> Visit us in booth 2527 at the Embedded Systems Conference 2004 <<<<<
March 30 - April 1, San Francisco http://www.esconline.com/electronicaUSA/
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss