This is the mail archive of the
cygwin@cygwin.com
mailing list for the Cygwin project.
Re: nice subject
- From: Christopher Faylor <cgf at redhat dot com>
- To: cygwin at cygwin dot com
- Date: Wed, 13 Nov 2002 15:50:49 -0500
- Subject: Re: nice subject
- References: <003e01c28b54$afe83660$02f07986@cypher>
- Reply-to: cygwin at cygwin dot com
On Wed, Nov 13, 2002 at 12:38:56PM -0800, Jake D. Stern wrote:
>[This is a bug report, I'm following cygwin reporting instructions by
>posting here. The subject line has been changed so as to not be refused.
>Original subject line: "xterm consumes 100% cpu when first XWin action is to
>close xterm."]
The fact that your subject was blocked didn't give you enough of a clue that
you were doing something wrong, eh? The mind boggles.
We HAVE A MAILING LIST for Cygwin/XFree86 discussions. Use it.
FYI, I've blocked this subject too. I can keep this up all day if you want.
cgf
>What happens: boot winxp, start cygwin, run startxwin.bat, and XWin starts
>normally. If the first action is anything other than to close the xterm,
>for example, open the desktop menu, then everything will run fine. However,
>if the first action is to close the xterm, either by typing 'exit' or by
>clicking on the button in the window bar, the xterm process will consume
>100% of my cpu (according to winxp task manager, assuming that was opened
>previously, because it will take forever to open after.)
>
>Interestingly, after killing the zombie xterm and window manager processes
>in winxp task manager and restart xwin, I can close xterm either by typing
>exit or clicking on the button in the window bar first and everything will
>run fine. So, it is only the first time after rebooting that this happens.
>I've tried this with wmaker, twm and fvwm2 window managers, and the problem
>persists except for the window manager that forces me to click to place the
>xterm, because that forces a first action other than to close the xterm.
>
>As this is a very strange and unlikely to be stumbled upon, I thought you'd
>want to know about it. Config follows.
>
>=====
>
>Hardware: Celeron 500, 256M RAM, ASUS CUBX, IBM DPTA-373420, S3 Savage4 32
>M, Adaptec 2940 UW, IBM DCAS-34330, (all running reliably) ...
>
>Software: Recent, stable, clean, licensed install of winXP Pro with .NET
>framework and latest service packs, running very reliably on 8G partition of
>the 34G IDE drive, Debian and DOS are on the 4G SCSI hard drive.
>
>Cygwin: fresh install on Nov 10, 2002. Modified the environment variables
>slightly to get a prompt I like and the startxwin.bat file to start the
>window manager I like, with only one open xterm, and my xterm preferences.
>
>$ cygcheck -s
>Cygwin Win95/NT Configuration Diagnostics
>Current System Time: Wed Nov 13 10:18:28 2002
>
>Windows XP Professional Ver 5.1 Build 2600 Service Pack 1
>
>Path: C:\cygwin\usr\local\bin
> C:\cygwin\bin
> C:\cygwin\bin
> c:\WINDOWS\system32
> c:\WINDOWS
> c:\WINDOWS\System32\Wbem
> c:\Program Files\Common Files\Adaptec Shared\System
> c:\Program Files\Microsoft SQL Server\80\Tools\Binn\
> c:\Program Files\SSH Communications Security\SSH Secure Shell
> C:\cygwin\usr\X11R6\bin
>
>SysDir: C:\WINDOWS\System32
>WinDir: C:\WINDOWS
>
>HOME = `C:\cygwin\home\Jake'
>MAKE_MODE = `unix'
>PWD = `/home/Jake'
>USER = `Jake'
>
>Use `-r' to scan registry
>
>a: fd N/A N/A
>c: hd NTFS 8158Mb 74% CP CS UN PA FC XP
>d: hd NTFS 24466Mb 48% CP CS UN PA FC STORAGE
>e: hd FAT 133Mb 32% CP UN DOS
>f: hd FAT32 2090Mb 17% CP UN SHARE
>g: hd NTFS 7Mb 99% CP CS UN PA FC End
>h: cd N/A N/A
>
>C:\cygwin / system binmode
>C:\cygwin/bin /usr/bin system binmode
>C:\cygwin/lib /usr/lib system binmode
>C:\cygwin\usr\X11R6\lib\X11\fonts /usr/X11R6/lib/X11/fonts system binmode
>. /cygdrive user
>binmode,cygdrive
>
>Found: C:\cygwin\bin\bash.exe
>Found: C:\cygwin\bin\cat.exe
>Found: C:\cygwin\bin\cpp.exe
>Found: C:\cygwin\bin\find.exe
>Found: C:\cygwin\bin\gcc.exe
>Not Found: gdb
>Found: C:\cygwin\bin\ld.exe
>Found: C:\cygwin\bin\ls.exe
>Found: C:\cygwin\bin\make.exe
>Found: C:\cygwin\bin\sh.exe
>
> 58k 2002/05/07 C:\cygwin\bin\cygbz2-1.dll
> 643k 2002/11/09 C:\cygwin\bin\cygcrypto.dll
> 475k 2002/10/11 C:\cygwin\bin\cygcurl-2.dll
> 45k 2001/04/25 C:\cygwin\bin\cygform5.dll
> 35k 2002/01/09 C:\cygwin\bin\cygform6.dll
> 19k 2002/02/20 C:\cygwin\bin\cyggdbm.dll
> 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll
> 20k 2002/10/10 C:\cygwin\bin\cyghistory5.dll
> 929k 2002/06/24 C:\cygwin\bin\cygiconv-2.dll
> 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll
> 28k 2002/09/20 C:\cygwin\bin\cygintl-2.dll
> 21k 2001/06/20 C:\cygwin\bin\cygintl.dll
> 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll
> 59k 2002/09/20 C:\cygwin\bin\cygkpathsea-3-3-7.dll
> 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll
> 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll
> 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll
> 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll
> 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll
> 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll
> 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll
> 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll
> 40k 2001/11/21 C:\cygwin\bin\cygpcre.dll
> 39k 2001/11/21 C:\cygwin\bin\cygpcreposix.dll
> 175k 2002/07/22 C:\cygwin\bin\cygpng10.dll
> 179k 2002/07/22 C:\cygwin\bin\cygpng12.dll
> 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll
> 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll
> 127k 2002/10/10 C:\cygwin\bin\cygreadline5.dll
> 66k 2001/11/20 C:\cygwin\bin\cygregex.dll
> 169k 2002/11/09 C:\cygwin\bin\cygssl.dll
> 253k 2002/02/10 C:\cygwin\bin\cygtiff3.dll
> 50k 2002/03/12 C:\cygwin\bin\cygz.dll
> 906k 2002/11/07 C:\cygwin\bin\cygwin1.dll
> Cygwin DLL version info:
> DLL version: 1.3.15
> DLL epoch: 19
> DLL bad signal mask: 19005
> DLL old termios: 5
> DLL malloc env: 28
> API major: 0
> API minor: 63
> Shared data: 3
> DLL identifier: cygwin1
> Mount registry: 2
> Cygnus registry name: Cygnus Solutions
> Cygwin registry name: Cygwin
> Program options name: Program Options
> Cygwin mount registry name: mounts v2
> Cygdrive flags: cygdrive flags
> Cygdrive prefix: cygdrive prefix
> Cygdrive default prefix:
> Build date: Thu Nov 7 13:57:47 EST 2002
> CVS tag: cygwin-1-3-15-1
> Shared id: cygwin1S3
>
> 41k 2002/05/14 C:\cygwin\usr\X11R6\bin\cygPropList-0.dll
>
>Cygwin Package Information
>Package Version
>WindowMaker 0.80.0-2
>XFree86-base 4.2.0-1
>XFree86-bin 4.2.0-2
>XFree86-doc 4.2.0-1
>XFree86-etc 4.2.0-1
>XFree86-f100 4.2.0-2
>XFree86-fcyr 4.2.0-2
>XFree86-fenc 4.2.0-2
>XFree86-fnts 4.2.0-2
>XFree86-fscl 4.2.0-2
>XFree86-fsrv 4.2.0-1
>XFree86-html 4.2.0-1
>XFree86-jdoc 4.2.0-1
>XFree86-lib 4.2.0-3
>XFree86-man 4.2.0-1
>XFree86-nest 4.2.0-1
>XFree86-prog 4.2.0-1
>XFree86-prt 4.2.0-1
>XFree86-ps 4.2.0-1
>XFree86-startup-scripts4.2.0-3
>XFree86-vfb 4.2.0-1
>XFree86-xserv 4.2.0-15
>Xaw3d 1.5-1
>_update-info-dir 00086-1
>ash 20020731-1
>base-files 1.0-1
>base-passwd 1.0-1
>bash 2.05b-7
>binutils 20021107-2
>bison 1.75-1
>byacc 1.9-1
>bzip2 1.0.2-2
>cgoban 1.9.12-1
>clear 1.0-1
>cpio 2.4.2
>crypt 1.0-1
>curl 7.10.1-1
>cygrunsrv 0.95-1
>cygutils 1.1.2-1
>cygwin 1.3.15-2
>cygwin-doc 1.2-1
>diff 1.0-1
>diffutils 2.8.1-1
>ed 0.2-1
>enscript 1.6.3-3
>file 3.37-1
>fileutils 4.1-1
>findutils 4.1.7-4
>flex 2.5.4-2
>fvwm 2.4.7-2
>gawk 3.1.1-5
>gcc 3.2-2
>gcc-mingw 3.2-20020817-1
>gdbm 1.8.0-4
>gettext 0.11.5-1
>ghostscript 7.05-2
>ghostscript-base 7.05-2
>ghostscript-x11 7.05-2
>gnugo 3.2-1
>grep 2.5-1
>groff 1.17.2-1
>gzip 1.3.3-4
>jpeg 6b-7
>keychain 1.9-1
>less 374-1
>lesstif 0.93.18-3
>libPropList 0.10.1-3
>libbz2_1 1.0.2-2
>libiconv2 1.8-2
>libintl 0.10.38-3
>libintl1 0.10.40-1
>libintl2 0.11.5-1
>libkpathsea3 20020911-1
>libncurses5 5.2-1
>libncurses6 5.2-8
>libpng10 1.0.14-2
>libpng12 1.2.4-2
>libpopt0 1.6.4-4
>libreadline4 4.1-2
>libreadline5 4.3-2
>login 1.5-1
>make 3.79.1-7
>man 1.5g-2
>mc 4.5.55-1
>mingw-runtime 2.2-1
>mod_ssl 2.8.8-1.3.24-1
>more 2.11o-1
>nano 1.1.10-1
>ncurses 5.2-8
>newlib-man 20020801
>openbox 0.99.1-3
>openssh 3.5p1-2
>openssl 0.9.6g-2
>pcre 3.7-1
>perl 5.6.1-2
>procps 010801-2
>rcs 5.7-3
>readline 4.3-2
>regex 4.4-2
>rsync 2.5.5-1
>sed 4.0.1-1
>sh-utils 2.0-2
>shutdown 1.2-2
>tar 1.13.25-1
>tcp_wrappers 7.6-1
>termcap 20020930-1
>terminfo 5.2-3
>tetex 20020911-1
>tetex-base 20020911-1
>tetex-bin 20020911-1
>tetex-doc 20020911-1
>tetex-tiny 20020911-1
>tetex-x11 20020911-1
>texinfo 4.2-4
>textutils 2.0.21-1
>tiff 3.5.7-1
>time 1.7-1
>vim 6.1-2
>w32api 2.0-1
>which 1.5-1
>whois 4.5.17-1
>x2x 1.27-2
>zlib 1.1.4-1
>
>Use -h to see help about each section
>
>
>--
>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting: http://cygwin.com/bugs.html
>Documentation: http://cygwin.com/docs.html
>FAQ: http://cygwin.com/faq/
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/