RE: h8300-elf-gdb-3.2.1 addresses clipped

["Shrinivas Atre" <ShrinivasA at kpit dot com>]

Hi,

I have faced the same problem.

One workaround to this problem is to use 'set remoteaddresssize 32' command.
Thanks to Petr Ledvina for his help.

I have reported this bug on GDB gnatsweb. The PR no is 1022.

Follow the link for the description of the problem I have posted.
http://sources.redhat.com/ml/gdb/2003-02/msg00299.html

Regards
Shrinivas

> -----Original Message-----
> From: Bill Gatliff [mailto:bgat at billgatliff dot com]
> Sent: 12 March 2003 09:43 PM
> To: crossgcc at sources dot redhat dot com; gdb at sources dot redhat dot com
> Subject: h8300-elf-gdb-3.2.1 addresses clipped
> 
> 
> Guys:
> 
> 
> I've noticed that h8300-elf-gdb-5.3 isn't sending all 24 bits of
> address for h8300s machines:
> 
>  Loading section .init, size 0xa lma 0x202000
>  Sending packet: $M2000,a:5e2020a05e2022105470#56...Ack
>  Packet received: OK
>  Loading section .text, size 0x246 lma 0x20200c
>  Sending packet:
>  $M200c,20:7a070027fffc7a00002
> 
> Note the difference between the address in the M packet vs. the
> address in the lma.  Gdb-3.2.1 works correctly.
> 
> Has anyone else seen this, before I start hunting it down?
> 
> 
> b.g.
> -- 
> Bill Gatliff
> Embedded Linux development and training services.
> http://billgatliff.com
> 
> ------
> Want more information?  See the CrossGCC FAQ, 
> http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to 
> crossgcc-unsubscribe at sources dot redhat dot com
> 
> 

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe at sources dot redhat dot com