[Arm] Align comments and spaces in crt0.S libgloss and sys/arm
Alexander Fedotov
alfedotov@gmail.com
Fri Apr 12 08:57:00 GMT 2019
Rebased patch to latest master.
>Style rules say that the full stop goes inside the parenthesis if the
>entire sentence is parenthetical; otherwise it goes outside. So its
>technically the other version that is incorrect.
Fixed.
OK to apply ?
If yes, please push it for me since I have no commit rights.
>From d58859f98ba5ef7f206c0967b093df2ca655e1fb Mon Sep 17 00:00:00 2001
From: Alexander Fedotov <alfedotov@gmail.com>
Date: Thu, 11 Apr 2019 15:28:05 +0300
Subject: [PATCH 1/2] Align comments and spaces in libgloss/arm/crt0.S and
newlib/libc/sys/arm/crt0.S to ease further code alignment.
---
libgloss/arm/crt0.S | 131 ++++++++++++++++++-------------------
newlib/libc/sys/arm/crt0.S | 18 ++---
2 files changed, 75 insertions(+), 74 deletions(-)
diff --git a/libgloss/arm/crt0.S b/libgloss/arm/crt0.S
index c708f63d8..d823706b4 100644
--- a/libgloss/arm/crt0.S
+++ b/libgloss/arm/crt0.S
@@ -90,14 +90,14 @@
#endif
#endif
-/* Start by setting up a stack */
+/* Start by setting up a stack. */
#ifdef ARM_RDP_MONITOR
- /* Issue Demon SWI to read stack info */
- swi SWI_GetEnv /* Returns command line in r0 */
- mov sp,r1 /* and the highest memory address in r1 */
+ /* Issue Demon SWI to read stack info. */
+ swi SWI_GetEnv /* Returns command line in r0. */
+ mov sp,r1 /* and the highest memory address in r1. */
- /* stack limit is at end of data */
- /* allow slop for stack overflow handling and small frames */
+ /* Stack limit is at end of data. */
+ /* Allow slop for stack overflow handling and small frames. */
#ifdef THUMB1_ONLY
ldr r0, .LC2
adds r0, #128
@@ -109,19 +109,19 @@
#endif
#else
#ifdef ARM_RDI_MONITOR
- /* Issue Angel SWI to read stack info */
+ /* Issue Angel SWI to read stack info. */
movs r0, #AngelSWI_Reason_HeapInfo
- adr r1, .LC0 /* point at ptr to 4 words to receive data */
+ adr r1, .LC0 /* Point at ptr to 4 words to receive data. */
#ifdef THUMB_VXM
bkpt AngelSWI
#elif defined(__thumb2__)
- /* We are in thumb mode for startup on armv7 architectures. */
+ /* We are in thumb mode for startup on armv7 architectures. */
AngelSWIAsm (AngelSWI)
#else
- /* We are always in ARM mode for startup on pre armv7 archs. */
+ /* We are always in ARM mode for startup on pre armv7 archs. */
AngelSWIAsm (AngelSWI_ARM)
#endif
- ldr r0, .LC0 /* point at values read */
+ ldr r0, .LC0 /* Point at values read. */
/* Set __heap_limit. */
ldr r1, [r0, #4]
@@ -148,14 +148,15 @@
to skip setting sp/sl to 0 here.
- Considering M-profile processors, We might want to initialize
sp by the first entry of vector table and return 0 to SYS_HEAPINFO
- semihosting call, which will be skipped here. */
+ semihosting call, which will be skipped here. */
cmp r1, #0
beq .LC26
mov sp, r1
.LC26:
cmp r2, #0
beq .LC27
- /* allow slop for stack overflow handling and small frames */
+
+ /* Allow slop for stack overflow handling and small frames. */
#ifdef THUMB1_ONLY
adds r2, #128
adds r2, #128
@@ -163,9 +164,10 @@
#else
add sl, r2, #256
#endif
+
.LC27:
#else
- /* Set up the stack pointer to a fixed value */
+ /* Set up the stack pointer to a fixed value. */
/* Changes by toralf:
- Allow linker script to provide stack via __stack symbol - see
defintion of .Lstack
@@ -175,7 +177,7 @@
Loosely based on init.s from ARM/Motorola example code.
Note: Mode switch via CPSR is not allowed once in non-privileged
mode, so we take care not to enter "User" to set up its sp,
- and also skip most operations if already in that mode. */
+ and also skip most operations if already in that mode. */
ldr r3, .Lstack
cmp r3, #0
@@ -192,42 +194,42 @@
/* Note: This 'mov' is essential when starting in User, and ensures we
always get *some* sp value for the initial mode, even if we
have somehow missed it below (in which case it gets the same
- value as FIQ - not ideal, but better than nothing.) */
+ value as FIQ - not ideal, but better than nothing). */
mov sp, r3
#ifdef PREFER_THUMB
/* XXX Fill in stack assignments for interrupt modes. */
#else
mrs r2, CPSR
- tst r2, #0x0F /* Test mode bits - in User of all are 0 */
- beq .LC23 /* "eq" means r2 AND #0x0F is 0 */
- msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled */
+ tst r2, #0x0F /* Test mode bits - in User of all are 0. */
+ beq .LC23 /* "eq" means r2 AND #0x0F is 0. */
+ msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */
mov sp, r3
- sub sl, sp, #0x1000 /* This mode also has its own sl (see below) */
+ sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */
mov r3, sl
- msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled */
+ msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */
mov sp, r3
sub r3, r3, #0x1000
- msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled */
+ msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */
mov sp, r3
sub r3, r3, #0x1000
- msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled */
+ msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */
mov sp, r3
sub r3, r3, #0x2000
- msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled */
+ msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */
mov sp, r3
- sub r3, r3, #0x8000 /* Min size 32k */
- bic r3, r3, #0x00FF /* Align with current 64k block */
+ sub r3, r3, #0x8000 /* Min size 32k. */
+ bic r3, r3, #0x00FF /* Align with current 64k block. */
bic r3, r3, #0xFF00
str r3, [r3, #-4] /* Move value into user mode sp without */
- ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm */
+ ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */
orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */
- msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1 */
+ msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */
#endif
.LC23:
/* Setup a default stack-limit in-case the code has been
@@ -243,24 +245,24 @@
subs r2, r3, r2
mov sl, r2
#else
- sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl */
+ sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */
#endif
#endif
#endif
/* Zero the memory in the .bss section. */
- movs a2, #0 /* Second arg: fill value */
- mov fp, a2 /* Null frame pointer */
- mov r7, a2 /* Null frame pointer for Thumb */
+ movs a2, #0 /* Second arg: fill value. */
+ mov fp, a2 /* Null frame pointer. */
+ mov r7, a2 /* Null frame pointer for Thumb. */
- ldr a1, .LC1 /* First arg: start of memory block */
+ ldr a1, .LC1 /* First arg: start of memory block. */
ldr a3, .LC2
- subs a3, a3, a1 /* Third arg: length of block */
+ subs a3, a3, a1 /* Third arg: length of block. */
#if __thumb__ && !defined(PREFER_THUMB)
- /* Enter Thumb mode.... */
- add a4, pc, #1 /* Get the address of the Thumb block */
- bx a4 /* Go there and start Thumb decoding */
+ /* Enter Thumb mode... */
+ add a4, pc, #1 /* Get the address of the Thumb block. */
+ bx a4 /* Go there and start Thumb decoding. */
.code 16
.global __change_mode
@@ -271,9 +273,8 @@ __change_mode:
bl FUNCTION (memset)
#if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR)
/* Changes by toralf: Taken from libgloss/m68k/crt0.S
- * initialize target specific stuff. Only execute these
- * functions it they exist.
- */
+ initialize target specific stuff. Only execute these
+ functions it they exist. */
ldr r3, .Lhwinit
cmp r3, #0
beq .LC24
@@ -285,24 +286,24 @@ __change_mode:
indirect_call r3
.LC25:
- movs r0, #0 /* no arguments */
- movs r1, #0 /* no argv either */
+ movs r0, #0 /* No arguments. */
+ movs r1, #0 /* No argv either. */
#else
- /* Need to set up standard file handles */
+ /* Need to set up standard file handles. */
bl FUNCTION (initialise_monitor_handles)
#ifdef ARM_RDP_MONITOR
- swi SWI_GetEnv /* sets r0 to point to the command line */
+ swi SWI_GetEnv /* Sets r0 to point to the command line. */
movs r1, r0
#else
movs r0, #AngelSWI_Reason_GetCmdLine
- ldr r1, .LC30 /* Space for command line */
+ ldr r1, .LC30 /* Space for command line. */
AngelSWIAsm (AngelSWI)
ldr r1, .LC30
ldr r1, [r1]
#endif
- /* Parse string at r1 */
- movs r0, #0 /* count of arguments so far */
+ /* Parse string at r1. */
+ movs r0, #0 /* Count of arguments so far. */
/* Push a NULL argument onto the end of the list. */
#ifdef __thumb__
push {r0}
@@ -310,7 +311,7 @@ __change_mode:
stmfd sp!, {r0}
#endif
.LC10:
-/* Skip leading blanks */
+/* Skip leading blanks. */
#ifdef __thumb__
ldrb r3, [r1]
adds r1, #1
@@ -322,7 +323,7 @@ __change_mode:
cmp r3, #' '
beq .LC10
-/* See whether we are scanning a string */
+/* See whether we are scanning a string. */
cmp r3, #'"'
#ifdef __thumb__
beq .LC20
@@ -333,17 +334,17 @@ __change_mode:
b .LC22
.LC21:
- movs r2, #' ' /* terminator type */
- subs r1, r1, #1 /* adjust back to point at start char */
+ movs r2, #' ' /* Terminator type. */
+ subs r1, r1, #1 /* Adjust back to point at start char. */
.LC22:
#else
cmpne r3, #'\''
moveq r2, r3
- movne r2, #' ' /* terminator type */
- subne r1, r1, #1 /* adjust back to point at start char */
+ movne r2, #' ' /* Terminator type. */
+ subne r1, r1, #1 /* Adjust back to point at start char. */
#endif
-/* Stack a pointer to the current argument */
+/* Stack a pointer to the current argument. */
#ifdef __thumb__
push {r1}
#else
@@ -359,16 +360,16 @@ __change_mode:
#endif
cmp r3, #0
beq .LC12
- cmp r2, r3 /* reached terminator? */
+ cmp r2, r3 /* Reached terminator ? */
bne .LC11
movs r2, #0
subs r3, r1, #1
- strb r2, [r3] /* terminate the arg string */
+ strb r2, [r3] /* Terminate the arg string. */
b .LC10
.LC12:
- mov r1, sp /* point at stacked arg pointers */
- /* We've now got the stacked args in order reverse the */
+ mov r1, sp /* Point at stacked arg pointers. */
+ /* We've now got the stacked args in order, reverse them. */
#ifdef __thumb__
movs r2, r0
lsls r2, #2
@@ -390,10 +391,10 @@ __change_mode:
bics r4, r5
mov sp, r4
#else
- add r2, sp, r0, LSL #2 /* End of args */
- mov r3, sp /* Start of args */
+ add r2, sp, r0, LSL #2 /* End of args. */
+ mov r3, sp /* Start of args. */
.LC13: cmp r2, r3
- ldrhi r4,[r2, #-4] /* Reverse ends of list */
+ ldrhi r4,[r2, #-4] /* Reverse ends of list. */
ldrhi r5, [r3]
strhi r5, [r2, #-4]!
strhi r4, [r3], #4
@@ -431,7 +432,6 @@ __change_mode:
#if __thumb__ && !defined(PREFER_THUMB)
/* Come out of Thumb mode. This code should be redundant. */
-
mov a4, pc
bx a4
@@ -447,7 +447,6 @@ change_back:
/* For Thumb, constants must be after the code since only
positive offsets are supported for PC relative addresses. */
-
.align 0
.LC0:
#ifdef ARM_RDI_MONITOR
@@ -457,13 +456,13 @@ change_back:
/* Changes by toralf: Provide alternative "stack" variable whose value
may be defined externally; .Lstack will be used instead of .LC0 if
it points to a non-0 value. Also set up references to "hooks" that
- may be used by the application to provide additional init code. */
-
+ may be used by the application to provide additional init code. */
#ifdef __pe__
.word 0x800000
#else
.word 0x80000 /* Top of RAM on the PIE board. */
#endif
+
.Lstack:
.word __stack
.Lhwinit:
@@ -476,7 +475,7 @@ change_back:
runtime (meaning "ignore setting") for the variables, when the user
does not provide the symbols. (The linker uses a weak symbol if,
and only if, a normal version of the same symbol isn't provided
- e.g. by a linker script or another object file.) */
+ e.g. by a linker script or another object file.) */
.weak __stack
.weak FUNCTION (hardware_init_hook)
diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S
index 8c9f7be38..7a6b40d9a 100644
--- a/newlib/libc/sys/arm/crt0.S
+++ b/newlib/libc/sys/arm/crt0.S
@@ -50,13 +50,13 @@
.global \name
.thumb_func
\name:
-.endm
+.endm
#else
.code 32
.macro FUNC_START name
- .global \name
+ .global \name
\name:
-.endm
+.endm
#endif
.macro indirect_call reg
@@ -68,8 +68,10 @@
#endif
.endm
+/*******************************************************************************
+* Main library startup code.
+*******************************************************************************/
.align 0
-
FUNC_START _mainCRTStartup
FUNC_START _start
#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
@@ -399,7 +401,7 @@ __change_mode:
bl FUNCTION (_init)
movs r0, r4
movs r1, r5
-#endif
+#endif
bl FUNCTION (main)
bl FUNCTION (exit) /* Should not return. */
@@ -420,7 +422,7 @@ change_back:
#endif
/* For Thumb, constants must be after the code since only
- positive offsets are supported for PC relative addresses. */
+ positive offsets are supported for PC relative addresses. */
.align 0
.LC0:
#ifdef ARM_RDI_MONITOR
@@ -430,7 +432,7 @@ change_back:
/* Changes by toralf: Provide alternative "stack" variable whose value
may be defined externally; .Lstack will be used instead of .LC0 if
it points to a non-0 value. Also set up references to "hooks" that
- may be used by the application to provide additional init
code. */
+ may be used by the application to provide additional init code. */
#ifdef __pe__
.word 0x800000
#else
@@ -449,7 +451,7 @@ change_back:
runtime (meaning "ignore setting") for the variables, when the user
does not provide the symbols. (The linker uses a weak symbol if,
and only if, a normal version of the same symbol isn't provided
- e.g. by a linker script or another object file). */
+ e.g. by a linker script or another object file.) */
.weak __stack
.weak FUNCTION (hardware_init_hook)
--
2.20.1.windows.1
On Thu, Apr 11, 2019 at 4:37 PM Alexander Fedotov <alfedotov@gmail.com> wrote:
>
> >Style rules say that the full stop goes inside the parenthesis if the
> >entire sentence is parenthetical; otherwise it goes outside. So its
> >technically the other version that is incorrect.
>
> Well I just wanted to have the same style in both sources :)
> I have a new patch for SP&SL refactor that is based on this one.
>
> >Do you have commit rights?
> Unfortunately no
>
> Alex
>
> On Thu, Apr 11, 2019 at 4:33 PM Richard Earnshaw (lists)
> <Richard.Earnshaw@arm.com> wrote:
> >
> > On 11/04/2019 13:58, Alexander Fedotov wrote:
> > > Sorry. I have missed some lines in previous patch. Here is new one below.
> > >
> > > From 68d7a9bb5f11ddc3c0420560c718b6a2f8041896 Mon Sep 17 00:00:00 2001
> > > From: Alexander Fedotov <alfedotov@gmail.com>
> > > Date: Thu, 11 Apr 2019 15:28:05 +0300
> > > Subject: [PATCH] Align comments and spaces in libgloss/arm/crt0.S and
> > > newlib/libc/sys/arm/crt0.S to ease further code alignment.
> > >
> > > ---
> > > libgloss/arm/crt0.S | 131 ++++++++++++++++++-------------------
> > > newlib/libc/sys/arm/crt0.S | 12 ++--
> > > 2 files changed, 71 insertions(+), 72 deletions(-)
> > >
> > > diff --git a/libgloss/arm/crt0.S b/libgloss/arm/crt0.S
> > > index c708f63d8..e5c813e3b 100644
> > > --- a/libgloss/arm/crt0.S
> > > +++ b/libgloss/arm/crt0.S
> > > @@ -90,14 +90,14 @@
> > > #endif
> > > #endif
> > >
> > > -/* Start by setting up a stack */
> > > +/* Start by setting up a stack. */
> > > #ifdef ARM_RDP_MONITOR
> > > - /* Issue Demon SWI to read stack info */
> > > - swi SWI_GetEnv /* Returns command line in r0 */
> > > - mov sp,r1 /* and the highest memory address in r1 */
> > > + /* Issue Demon SWI to read stack info. */
> > > + swi SWI_GetEnv /* Returns command line in r0. */
> > > + mov sp,r1 /* and the highest memory address in r1. */
> > >
> > > - /* stack limit is at end of data */
> > > - /* allow slop for stack overflow handling and small frames */
> > > + /* Stack limit is at end of data. */
> > > + /* Allow slop for stack overflow handling and small frames. */
> > > #ifdef THUMB1_ONLY
> > > ldr r0, .LC2
> > > adds r0, #128
> > > @@ -109,19 +109,19 @@
> > > #endif
> > > #else
> > > #ifdef ARM_RDI_MONITOR
> > > - /* Issue Angel SWI to read stack info */
> > > + /* Issue Angel SWI to read stack info. */
> > > movs r0, #AngelSWI_Reason_HeapInfo
> > > - adr r1, .LC0 /* point at ptr to 4 words to receive data */
> > > + adr r1, .LC0 /* Point at ptr to 4 words to receive data. */
> > > #ifdef THUMB_VXM
> > > bkpt AngelSWI
> > > #elif defined(__thumb2__)
> > > - /* We are in thumb mode for startup on armv7 architectures. */
> > > + /* We are in thumb mode for startup on armv7 architectures. */
> > > AngelSWIAsm (AngelSWI)
> > > #else
> > > - /* We are always in ARM mode for startup on pre armv7 archs. */
> > > + /* We are always in ARM mode for startup on pre armv7 archs. */
> > > AngelSWIAsm (AngelSWI_ARM)
> > > #endif
> > > - ldr r0, .LC0 /* point at values read */
> > > + ldr r0, .LC0 /* Point at values read. */
> > >
> > > /* Set __heap_limit. */
> > > ldr r1, [r0, #4]
> > > @@ -148,14 +148,15 @@
> > > to skip setting sp/sl to 0 here.
> > > - Considering M-profile processors, We might want to initialize
> > > sp by the first entry of vector table and return 0 to SYS_HEAPINFO
> > > - semihosting call, which will be skipped here. */
> > > + semihosting call, which will be skipped here. */
> > > cmp r1, #0
> > > beq .LC26
> > > mov sp, r1
> > > .LC26:
> > > cmp r2, #0
> > > beq .LC27
> > > - /* allow slop for stack overflow handling and small frames */
> > > +
> > > + /* Allow slop for stack overflow handling and small frames. */
> > > #ifdef THUMB1_ONLY
> > > adds r2, #128
> > > adds r2, #128
> > > @@ -163,9 +164,10 @@
> > > #else
> > > add sl, r2, #256
> > > #endif
> > > +
> > > .LC27:
> > > #else
> > > - /* Set up the stack pointer to a fixed value */
> > > + /* Set up the stack pointer to a fixed value. */
> > > /* Changes by toralf:
> > > - Allow linker script to provide stack via __stack symbol - see
> > > defintion of .Lstack
> > > @@ -175,7 +177,7 @@
> > > Loosely based on init.s from ARM/Motorola example code.
> > > Note: Mode switch via CPSR is not allowed once in non-privileged
> > > mode, so we take care not to enter "User" to set up its sp,
> > > - and also skip most operations if already in that mode. */
> > > + and also skip most operations if already in that mode. */
> > >
> > > ldr r3, .Lstack
> > > cmp r3, #0
> > > @@ -192,42 +194,42 @@
> > > /* Note: This 'mov' is essential when starting in User, and ensures we
> > > always get *some* sp value for the initial mode, even if we
> > > have somehow missed it below (in which case it gets the same
> > > - value as FIQ - not ideal, but better than nothing.) */
> > > + value as FIQ - not ideal, but better than nothing). */
> > > mov sp, r3
> > > #ifdef PREFER_THUMB
> > > /* XXX Fill in stack assignments for interrupt modes. */
> > > #else
> > > mrs r2, CPSR
> > > - tst r2, #0x0F /* Test mode bits - in User of all are 0 */
> > > - beq .LC23 /* "eq" means r2 AND #0x0F is 0 */
> > > - msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled */
> > > + tst r2, #0x0F /* Test mode bits - in User of all are 0. */
> > > + beq .LC23 /* "eq" means r2 AND #0x0F is 0. */
> > > + msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */
> > > mov sp, r3
> > > - sub sl, sp, #0x1000 /* This mode also has its own sl (see below) */
> > > + sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */
> > >
> > > mov r3, sl
> > > - msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled */
> > > + msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */
> > > mov sp, r3
> > > sub r3, r3, #0x1000
> > >
> > > - msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled */
> > > + msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */
> > > mov sp, r3
> > > sub r3, r3, #0x1000
> > >
> > > - msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled */
> > > + msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */
> > > mov sp, r3
> > > sub r3, r3, #0x2000
> > >
> > > - msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled */
> > > + msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */
> > >
> > > mov sp, r3
> > > - sub r3, r3, #0x8000 /* Min size 32k */
> > > - bic r3, r3, #0x00FF /* Align with current 64k block */
> > > + sub r3, r3, #0x8000 /* Min size 32k. */
> > > + bic r3, r3, #0x00FF /* Align with current 64k block. */
> > > bic r3, r3, #0xFF00
> > >
> > > str r3, [r3, #-4] /* Move value into user mode sp without */
> > > - ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm */
> > > + ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */
> > > orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */
> > > - msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1 */
> > > + msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */
> > > #endif
> > > .LC23:
> > > /* Setup a default stack-limit in-case the code has been
> > > @@ -243,24 +245,24 @@
> > > subs r2, r3, r2
> > > mov sl, r2
> > > #else
> > > - sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl */
> > > + sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */
> > > #endif
> > > #endif
> > > #endif
> > > /* Zero the memory in the .bss section. */
> > > - movs a2, #0 /* Second arg: fill value */
> > > - mov fp, a2 /* Null frame pointer */
> > > - mov r7, a2 /* Null frame pointer for Thumb */
> > > + movs a2, #0 /* Second arg: fill value. */
> > > + mov fp, a2 /* Null frame pointer. */
> > > + mov r7, a2 /* Null frame pointer for Thumb. */
> > >
> > > - ldr a1, .LC1 /* First arg: start of memory block */
> > > + ldr a1, .LC1 /* First arg: start of memory block. */
> > > ldr a3, .LC2
> > > - subs a3, a3, a1 /* Third arg: length of block */
> > > + subs a3, a3, a1 /* Third arg: length of block. */
> > >
> > >
> > > #if __thumb__ && !defined(PREFER_THUMB)
> > > - /* Enter Thumb mode.... */
> > > - add a4, pc, #1 /* Get the address of the Thumb block */
> > > - bx a4 /* Go there and start Thumb decoding */
> > > + /* Enter Thumb mode... */
> > > + add a4, pc, #1 /* Get the address of the Thumb block. */
> > > + bx a4 /* Go there and start Thumb decoding. */
> > >
> > > .code 16
> > > .global __change_mode
> > > @@ -271,9 +273,8 @@ __change_mode:
> > > bl FUNCTION (memset)
> > > #if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR)
> > > /* Changes by toralf: Taken from libgloss/m68k/crt0.S
> > > - * initialize target specific stuff. Only execute these
> > > - * functions it they exist.
> > > - */
> > > + initialize target specific stuff. Only execute these
> > > + functions it they exist. */
> > > ldr r3, .Lhwinit
> > > cmp r3, #0
> > > beq .LC24
> > > @@ -285,24 +286,24 @@ __change_mode:
> > > indirect_call r3
> > >
> > > .LC25:
> > > - movs r0, #0 /* no arguments */
> > > - movs r1, #0 /* no argv either */
> > > + movs r0, #0 /* No arguments. */
> > > + movs r1, #0 /* No argv either. */
> > > #else
> > > - /* Need to set up standard file handles */
> > > + /* Need to set up standard file handles. */
> > > bl FUNCTION (initialise_monitor_handles)
> > >
> > > #ifdef ARM_RDP_MONITOR
> > > - swi SWI_GetEnv /* sets r0 to point to the command line */
> > > + swi SWI_GetEnv /* Sets r0 to point to the command line. */
> > > movs r1, r0
> > > #else
> > > movs r0, #AngelSWI_Reason_GetCmdLine
> > > - ldr r1, .LC30 /* Space for command line */
> > > + ldr r1, .LC30 /* Space for command line. */
> > > AngelSWIAsm (AngelSWI)
> > > ldr r1, .LC30
> > > ldr r1, [r1]
> > > #endif
> > > - /* Parse string at r1 */
> > > - movs r0, #0 /* count of arguments so far */
> > > + /* Parse string at r1. */
> > > + movs r0, #0 /* Count of arguments so far. */
> > > /* Push a NULL argument onto the end of the list. */
> > > #ifdef __thumb__
> > > push {r0}
> > > @@ -310,7 +311,7 @@ __change_mode:
> > > stmfd sp!, {r0}
> > > #endif
> > > .LC10:
> > > -/* Skip leading blanks */
> > > +/* Skip leading blanks. */
> > > #ifdef __thumb__
> > > ldrb r3, [r1]
> > > adds r1, #1
> > > @@ -322,7 +323,7 @@ __change_mode:
> > > cmp r3, #' '
> > > beq .LC10
> > >
> > > -/* See whether we are scanning a string */
> > > +/* See whether we are scanning a string. */
> > > cmp r3, #'"'
> > > #ifdef __thumb__
> > > beq .LC20
> > > @@ -333,17 +334,17 @@ __change_mode:
> > > b .LC22
> > >
> > > .LC21:
> > > - movs r2, #' ' /* terminator type */
> > > - subs r1, r1, #1 /* adjust back to point at start char */
> > > + movs r2, #' ' /* Terminator type. */
> > > + subs r1, r1, #1 /* Adjust back to point at start char. */
> > > .LC22:
> > > #else
> > > cmpne r3, #'\''
> > > moveq r2, r3
> > > - movne r2, #' ' /* terminator type */
> > > - subne r1, r1, #1 /* adjust back to point at start char */
> > > + movne r2, #' ' /* Terminator type. */
> > > + subne r1, r1, #1 /* Adjust back to point at start char. */
> > > #endif
> > >
> > > -/* Stack a pointer to the current argument */
> > > +/* Stack a pointer to the current argument. */
> > > #ifdef __thumb__
> > > push {r1}
> > > #else
> > > @@ -359,16 +360,16 @@ __change_mode:
> > > #endif
> > > cmp r3, #0
> > > beq .LC12
> > > - cmp r2, r3 /* reached terminator? */
> > > + cmp r2, r3 /* Reached terminator ? */
> > > bne .LC11
> > > movs r2, #0
> > > subs r3, r1, #1
> > > - strb r2, [r3] /* terminate the arg string */
> > > + strb r2, [r3] /* Terminate the arg string. */
> > > b .LC10
> > >
> > > .LC12:
> > > - mov r1, sp /* point at stacked arg pointers */
> > > - /* We've now got the stacked args in order reverse the */
> > > + mov r1, sp /* Point at stacked arg pointers. */
> > > + /* We've now got the stacked args in order, reverse them. */
> > > #ifdef __thumb__
> > > movs r2, r0
> > > lsls r2, #2
> > > @@ -390,10 +391,10 @@ __change_mode:
> > > bics r4, r5
> > > mov sp, r4
> > > #else
> > > - add r2, sp, r0, LSL #2 /* End of args */
> > > - mov r3, sp /* Start of args */
> > > + add r2, sp, r0, LSL #2 /* End of args. */
> > > + mov r3, sp /* Start of args. */
> > > .LC13: cmp r2, r3
> > > - ldrhi r4,[r2, #-4] /* Reverse ends of list */
> > > + ldrhi r4,[r2, #-4] /* Reverse ends of list. */
> > > ldrhi r5, [r3]
> > > strhi r5, [r2, #-4]!
> > > strhi r4, [r3], #4
> > > @@ -431,7 +432,6 @@ __change_mode:
> > >
> > > #if __thumb__ && !defined(PREFER_THUMB)
> > > /* Come out of Thumb mode. This code should be redundant. */
> > > -
> > > mov a4, pc
> > > bx a4
> > >
> > > @@ -447,7 +447,6 @@ change_back:
> > >
> > > /* For Thumb, constants must be after the code since only
> > > positive offsets are supported for PC relative addresses. */
> > > -
> > > .align 0
> > > .LC0:
> > > #ifdef ARM_RDI_MONITOR
> > > @@ -457,13 +456,13 @@ change_back:
> > > /* Changes by toralf: Provide alternative "stack" variable whose value
> > > may be defined externally; .Lstack will be used instead of .LC0 if
> > > it points to a non-0 value. Also set up references to "hooks" that
> > > - may be used by the application to provide additional init code. */
> > > -
> > > + may be used by the application to provide additional init code. */
> > > #ifdef __pe__
> > > .word 0x800000
> > > #else
> > > .word 0x80000 /* Top of RAM on the PIE board. */
> > > #endif
> > > +
> > > .Lstack:
> > > .word __stack
> > > .Lhwinit:
> > > @@ -476,7 +475,7 @@ change_back:
> > > runtime (meaning "ignore setting") for the variables, when the user
> > > does not provide the symbols. (The linker uses a weak symbol if,
> > > and only if, a normal version of the same symbol isn't provided
> > > - e.g. by a linker script or another object file.) */
> > > + e.g. by a linker script or another object file). */
> >
> > Style rules say that the full stop goes inside the parenthesis if the
> > entire sentence is parenthetical; otherwise it goes outside. So its
> > technically the other version that is incorrect.
> >
> > >
> > > .weak __stack
> > > .weak FUNCTION (hardware_init_hook)
> > > diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S
> > > index 64d425900..602148969 100644
> > > --- a/newlib/libc/sys/arm/crt0.S
> > > +++ b/newlib/libc/sys/arm/crt0.S
> > > @@ -50,13 +50,13 @@
> > > .global \name
> > > .thumb_func
> > > \name:
> > > -.endm
> > > +.endm
> > > #else
> > > .code 32
> > > .macro FUNC_START name
> > > - .global \name
> > > + .global \name
> > > \name:
> > > -.endm
> > > +.endm
> > > #endif
> > >
> > > .macro indirect_call reg
> > > @@ -399,7 +399,7 @@ __change_mode:
> > > bl FUNCTION (_init)
> > > movs r0, r4
> > > movs r1, r5
> > > -#endif
> > > +#endif
> > > bl FUNCTION (main)
> > >
> > > bl FUNCTION (exit) /* Should not return. */
> > > @@ -420,7 +420,7 @@ change_back:
> > > #endif
> > >
> > > /* For Thumb, constants must be after the code since only
> > > - positive offsets are supported for PC relative addresses. */
> > > + positive offsets are supported for PC relative addresses. */
> > > .align 0
> > > .LC0:
> > > #ifdef ARM_RDI_MONITOR
> > > @@ -430,7 +430,7 @@ change_back:
> > > /* Changes by toralf: Provide alternative "stack" variable whose value
> > > may be defined externally; .Lstack will be used instead of .LC0 if
> > > it points to a non-0 value. Also set up references to "hooks" that
> > > - may be used by the application to provide additional init
> > > code. */
> > > + may be used by the application to provide additional init code. */
> > > #ifdef __pe__
> > > .word 0x800000
> > > #else
> > >
> >
> > Other than the comment above, this is fine. Thanks for doing this.
> >
> > Do you have commit rights?
> >
> > R.
More information about the Newlib
mailing list