[PATCH v3 1/3] x86/string: Factor out large memmove implemention to seperate file
Noah Goldstein
goldstein.w.n@gmail.com
Fri Nov 28 06:56:44 GMT 2025
On Fri, Nov 28, 2025, 08:56 Sunil Pandey <skpgkp2@gmail.com> wrote:
>
>
>
> On Thu, Nov 27, 2025 at 12:47 AM Noah Goldstein <goldstein.w.n@gmail.com>
> wrote:
>
>> On Wed, Nov 26, 2025 at 8:53 PM H.J. Lu <hjl.tools@gmail.com> wrote:
>> >
>> > On Thu, Nov 27, 2025 at 9:19 AM Sunil Pandey <skpgkp2@gmail.com> wrote:
>> > >
>> > > Hi Noah,
>> > >
>> > > Looking into bugzilla
>> https://sourceware.org/bugzilla/show_bug.cgi?id=32475
>> > >
>> > > Can you please modify patch to just address the issue listed in the
>> bug, without any change on Intel
>> > > processors. As far as I know, we don't have any perf issue on Intel
>> side and patch is regressing on
>> > > newer processors. On SPR this patch has no performance impact.
>>
>> Okay, added a 4th patch to the series that makes this default for all
>> intel bigcore.
>>
>
> How about not making any changes for Intel processors?
>
Do we have any evidence the page unrolled impl is good for atom?
> I still advise that you robustly test the page-unrolled vs standard
>> implementation
>> as it only seems like a matter of time until some hardware
>> optimization makes the
>> standard approach optimal.
>>
>> Thank you for benchmarking, glad to see that after SPR it still is
>> yielding benefits :)
>>
>> >
>> > SPR is old. Please try it on the current Intel processors.
>>
>> I think he ran SPEC on some newer processors.
>
>
>> >
>> > > --Sunil
>> > >
>> > > On Tue, Nov 25, 2025 at 6:42 PM Noah Goldstein <
>> goldstein.w.n@gmail.com> wrote:
>> > >>
>> > >> On Tue, Nov 25, 2025 at 8:44 PM Noah Goldstein <
>> goldstein.w.n@gmail.com> wrote:
>> > >> >
>> > >> > On Tue, Nov 25, 2025 at 10:37 AM Sunil Pandey <skpgkp2@gmail.com>
>> wrote:
>> > >> > >
>> > >> > >
>> > >> > >
>> > >> > > On Thu, Nov 20, 2025 at 3:14 PM H.J. Lu <hjl.tools@gmail.com>
>> wrote:
>> > >> > >>
>> > >> > >> On Fri, Nov 21, 2025 at 1:41 AM Sunil Pandey <skpgkp2@gmail.com>
>> wrote:
>> > >> > >> >
>> > >> > >> >
>> > >> > >> >
>> > >> > >> > On Sat, Nov 15, 2025 at 1:45 AM Noah Goldstein <
>> goldstein.w.n@gmail.com> wrote:
>> > >> > >> >>
>> > >> > >> >> On Sat, Nov 15, 2025 at 4:41 AM Noah Goldstein <
>> goldstein.w.n@gmail.com> wrote:
>> > >> > >> >> >
>> > >> > >> >> > On Sat, Nov 15, 2025 at 4:33 AM Noah Goldstein <
>> goldstein.w.n@gmail.com> wrote:
>> > >> > >> >> > >
>> > >> > >> >> > > This is to enable us to support multiple large (size
>> greater than
>> > >> > >> >> > > non-temporal threshold) implementations.
>> > >> > >> >> > >
>> > >> > >> >> > > This patch has no affect on the resulting libc.so
>> library.
>> > >> > >> >> > > ---
>> > >> > >> >> > > .../memmove-vec-large-page-unrolled.S | 272
>> ++++++++++++++++++
>> > >> > >> >> > > .../multiarch/memmove-vec-unaligned-erms.S | 272
>> +-----------------
>> > >> > >> >> > > 2 files changed, 279 insertions(+), 265 deletions(-)
>> > >> > >> >> > > create mode 100644
>> sysdeps/x86_64/multiarch/memmove-vec-large-page-unrolled.S
>> > >> > >> >> > >
>> > >> > >> >> > > diff --git
>> a/sysdeps/x86_64/multiarch/memmove-vec-large-page-unrolled.S
>> b/sysdeps/x86_64/multiarch/memmove-vec-large-page-unrolled.S
>> > >> > >> >> > > new file mode 100644
>> > >> > >> >> > > index 0000000000..b5b4593279
>> > >> > >> >> > > --- /dev/null
>> > >> > >> >> > > +++
>> b/sysdeps/x86_64/multiarch/memmove-vec-large-page-unrolled.S
>> > >> > >> >> > > @@ -0,0 +1,272 @@
>> > >> > >> >> > > +#ifdef MEMMOVE_LARGE_IMPL
>> > >> > >> >> > > +# error "Multiple large memmove impls included!"
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +#define MEMMOVE_LARGE_IMPL 1
>> > >> > >> >> > > +
>> > >> > >> >> > > +/* Copies large regions by copying multiple pages at
>> once. This is
>> > >> > >> >> > > + beneficial on some older Intel hardware
>> (Broadwell, Skylake, and
>> > >> > >> >> > > + Icelake).
>> > >> > >> >> > > + 1. If size < 16 *
>> __x86_shared_non_temporal_threshold and
>> > >> > >> >> > > + source and destination do not page alias, copy
>> from 2 pages
>> > >> > >> >> > > + at once using non-temporal stores. Page aliasing
>> in this case is
>> > >> > >> >> > > + considered true if destination's page alignment -
>> sources' page
>> > >> > >> >> > > + alignment is less than 8 * VEC_SIZE.
>> > >> > >> >> > > + 2. If size >= 16 *
>> __x86_shared_non_temporal_threshold or source
>> > >> > >> >> > > + and destination do page alias copy from 4 pages
>> at once using
>> > >> > >> >> > > + non-temporal stores. */
>> > >> > >> >> > > +
>> > >> > >> >> > > +#ifndef LOG_PAGE_SIZE
>> > >> > >> >> > > +# define LOG_PAGE_SIZE 12
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +
>> > >> > >> >> > > +#if PAGE_SIZE != (1 << LOG_PAGE_SIZE)
>> > >> > >> >> > > +# error Invalid LOG_PAGE_SIZE
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +
>> > >> > >> >> > > +/* Byte per page for large_memcpy inner loop. */
>> > >> > >> >> > > +#if VEC_SIZE == 64
>> > >> > >> >> > > +# define LARGE_LOAD_SIZE (VEC_SIZE * 2)
>> > >> > >> >> > > +#else
>> > >> > >> >> > > +# define LARGE_LOAD_SIZE (VEC_SIZE * 4)
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +
>> > >> > >> >> > > +/* Amount to shift __x86_shared_non_temporal_threshold
>> by for
>> > >> > >> >> > > + bound for memcpy_large_4x. This is essentially use
>> to to
>> > >> > >> >> > > + indicate that the copy is far beyond the scope of L3
>> > >> > >> >> > > + (assuming no user config x86_non_temporal_threshold)
>> and to
>> > >> > >> >> > > + use a more aggressively unrolled loop. NB: before
>> > >> > >> >> > > + increasing the value also update initialization of
>> > >> > >> >> > > + x86_non_temporal_threshold. */
>> > >> > >> >> > > +#ifndef LOG_4X_MEMCPY_THRESH
>> > >> > >> >> > > +# define LOG_4X_MEMCPY_THRESH 4
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +
>> > >> > >> >> > > +#if LARGE_LOAD_SIZE == (VEC_SIZE * 2)
>> > >> > >> >> > > +# define LOAD_ONE_SET(base, offset, vec0, vec1, ...) \
>> > >> > >> >> > > + VMOVU (offset)base, vec0; \
>> > >> > >> >> > > + VMOVU ((offset) + VEC_SIZE)base, vec1;
>> > >> > >> >> > > +# define STORE_ONE_SET(base, offset, vec0, vec1, ...) \
>> > >> > >> >> > > + VMOVNT vec0, (offset)base; \
>> > >> > >> >> > > + VMOVNT vec1, ((offset) + VEC_SIZE)base;
>> > >> > >> >> > > +#elif LARGE_LOAD_SIZE == (VEC_SIZE * 4)
>> > >> > >> >> > > +# define LOAD_ONE_SET(base, offset, vec0, vec1, vec2,
>> vec3) \
>> > >> > >> >> > > + VMOVU (offset)base, vec0; \
>> > >> > >> >> > > + VMOVU ((offset) + VEC_SIZE)base, vec1; \
>> > >> > >> >> > > + VMOVU ((offset) + VEC_SIZE * 2)base, vec2; \
>> > >> > >> >> > > + VMOVU ((offset) + VEC_SIZE * 3)base, vec3;
>> > >> > >> >> > > +# define STORE_ONE_SET(base, offset, vec0, vec1, vec2,
>> vec3) \
>> > >> > >> >> > > + VMOVNT vec0, (offset)base; \
>> > >> > >> >> > > + VMOVNT vec1, ((offset) + VEC_SIZE)base; \
>> > >> > >> >> > > + VMOVNT vec2, ((offset) + VEC_SIZE * 2)base; \
>> > >> > >> >> > > + VMOVNT vec3, ((offset) + VEC_SIZE * 3)base;
>> > >> > >> >> > > +#else
>> > >> > >> >> > > +# error Invalid LARGE_LOAD_SIZE
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > +
>> > >> > >> >> > > + .p2align 4,, 10
>> > >> > >> >> > > +#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN
>> (libc)
>> > >> > >> >> > > +L(large_memcpy_check):
>> > >> > >> >> > > + /* Entry from L(large_memcpy_2x) has a redundant
>> load of
>> > >> > >> >> > > + __x86_shared_non_temporal_threshold(%rip).
>> L(large_memcpy_2x)
>> > >> > >> >> > > + is only use for the non-erms memmove which is
>> generally less
>> > >> > >> >> > > + common. */
>> > >> > >> >> > > +L(large_memcpy):
>> > >> > >> >> > > + mov
>> __x86_shared_non_temporal_threshold(%rip), %R11_LP
>> > >> > >> >> > > + cmp %R11_LP, %RDX_LP
>> > >> > >> >> > > + jb L(more_8x_vec_check)
>> > >> > >> >> > > + /* To reach this point it is impossible for dst
>> > src and
>> > >> > >> >> > > + overlap. Remaining to check is src > dst and
>> overlap. rcx
>> > >> > >> >> > > + already contains dst - src. Negate rcx to get
>> src - dst. If
>> > >> > >> >> > > + length > rcx then there is overlap and
>> forward copy is best. */
>> > >> > >> >> > > + negq %rcx
>> > >> > >> >> > > + cmpq %rcx, %rdx
>> > >> > >> >> > > + ja L(more_8x_vec_forward)
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Cache align destination. First store the
>> first 64 bytes then
>> > >> > >> >> > > + adjust alignments. */
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* First vec was also loaded into VEC(0). */
>> > >> > >> >> > > +# if VEC_SIZE < 64
>> > >> > >> >> > > + VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > +# if VEC_SIZE < 32
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > +# endif
>> > >> > >> >> > > +# endif
>> > >> > >> >> > > + VMOVU %VMM(0), (%rdi)
>> > >> > >> >> > > +# if VEC_SIZE < 64
>> > >> > >> >> > > + VMOVU %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > +# if VEC_SIZE < 32
>> > >> > >> >> > > + VMOVU %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > + VMOVU %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > +# endif
>> > >> > >> >> > > +# endif
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Adjust source, destination, and size. */
>> > >> > >> >> > > + movq %rdi, %r8
>> > >> > >> >> > > + andq $63, %r8
>> > >> > >> >> > > + /* Get the negative of offset for alignment. */
>> > >> > >> >> > > + subq $64, %r8
>> > >> > >> >> > > + /* Adjust source. */
>> > >> > >> >> > > + subq %r8, %rsi
>> > >> > >> >> > > + /* Adjust destination which should be aligned
>> now. */
>> > >> > >> >> > > + subq %r8, %rdi
>> > >> > >> >> > > + /* Adjust length. */
>> > >> > >> >> > > + addq %r8, %rdx
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Test if source and destination addresses will
>> alias. If they
>> > >> > >> >> > > + do the larger pipeline in large_memcpy_4x
>> alleviated the
>> > >> > >> >> > > + performance drop. */
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* ecx contains -(dst - src). not ecx will
>> return dst - src - 1
>> > >> > >> >> > > + which works for testing aliasing. */
>> > >> > >> >> > > + notl %ecx
>> > >> > >> >> > > + movq %rdx, %r10
>> > >> > >> >> > > + testl $(PAGE_SIZE - VEC_SIZE * 8), %ecx
>> > >> > >> >> > > + jz L(large_memcpy_4x)
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* r11 has __x86_shared_non_temporal_threshold.
>> Shift it left
>> > >> > >> >> > > + by LOG_4X_MEMCPY_THRESH to get
>> L(large_memcpy_4x) threshold. */
>> > >> > >> >> > > + shlq $LOG_4X_MEMCPY_THRESH, %r11
>> > >> > >> >> > > + cmp %r11, %rdx
>> > >> > >> >> > > + jae L(large_memcpy_4x)
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* edx will store remainder size for copying
>> tail. */
>> > >> > >> >> > > + andl $(PAGE_SIZE * 2 - 1), %edx
>> > >> > >> >> > > + /* r10 stores outer loop counter. */
>> > >> > >> >> > > + shrq $(LOG_PAGE_SIZE + 1), %r10
>> > >> > >> >> > > + /* Copy 4x VEC at a time from 2 pages. */
>> > >> > >> >> > > + .p2align 4
>> > >> > >> >> > > +L(loop_large_memcpy_2x_outer):
>> > >> > >> >> > > + /* ecx stores inner loop counter. */
>> > >> > >> >> > > + movl $(PAGE_SIZE / LARGE_LOAD_SIZE), %ecx
>> > >> > >> >> > > +L(loop_large_memcpy_2x_inner):
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE * 2)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE * 2)
>> > >> > >> >> > > + /* Load vectors from rsi. */
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > + subq $-LARGE_LOAD_SIZE, %rsi
>> > >> > >> >> > > + /* Non-temporal store vectors to rdi. */
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > + subq $-LARGE_LOAD_SIZE, %rdi
>> > >> > >> >> > > + decl %ecx
>> > >> > >> >> > > + jnz L(loop_large_memcpy_2x_inner)
>> > >> > >> >> > > + addq $PAGE_SIZE, %rdi
>> > >> > >> >> > > + addq $PAGE_SIZE, %rsi
>> > >> > >> >> > > + decq %r10
>> > >> > >> >> > > + jne L(loop_large_memcpy_2x_outer)
>> > >> > >> >> > > + sfence
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Check if only last 4 loads are needed. */
>> > >> > >> >> > > + cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + jbe L(large_memcpy_2x_end)
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Handle the last 2 * PAGE_SIZE bytes. */
>> > >> > >> >> > > +L(loop_large_memcpy_2x_tail):
>> > >> > >> >> > > + /* Copy 4 * VEC a time forward with non-temporal
>> stores. */
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rdi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + VMOVU (%rsi), %VMM(0)
>> > >> > >> >> > > + VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > + subq $-(VEC_SIZE * 4), %rsi
>> > >> > >> >> > > + addl $-(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + VMOVA %VMM(0), (%rdi)
>> > >> > >> >> > > + VMOVA %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > + VMOVA %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > + VMOVA %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > + subq $-(VEC_SIZE * 4), %rdi
>> > >> > >> >> > > + cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + ja L(loop_large_memcpy_2x_tail)
>> > >> > >> >> > > +
>> > >> > >> >> > > +L(large_memcpy_2x_end):
>> > >> > >> >> > > + /* Store the last 4 * VEC. */
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VMM(0)
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VMM(1)
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VMM(2)
>> > >> > >> >> > > + VMOVU -VEC_SIZE(%rsi, %rdx), %VMM(3)
>> > >> > >> >> > > +
>> > >> > >> >> > > + VMOVU %VMM(0), -(VEC_SIZE * 4)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(1), -(VEC_SIZE * 3)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(2), -(VEC_SIZE * 2)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(3), -VEC_SIZE(%rdi, %rdx)
>> > >> > >> >> > > + VZEROUPPER_RETURN
>> > >> > >> >> > > +
>> > >> > >> >> > > + .p2align 4
>> > >> > >> >> > > +L(large_memcpy_4x):
>> > >> > >> >> > > + /* edx will store remainder size for copying
>> tail. */
>> > >> > >> >> > > + andl $(PAGE_SIZE * 4 - 1), %edx
>> > >> > >> >> > > + /* r10 stores outer loop counter. */
>> > >> > >> >> > > + shrq $(LOG_PAGE_SIZE + 2), %r10
>> > >> > >> >> > > + /* Copy 4x VEC at a time from 4 pages. */
>> > >> > >> >> > > + .p2align 4
>> > >> > >> >> > > +L(loop_large_memcpy_4x_outer):
>> > >> > >> >> > > + /* ecx stores inner loop counter. */
>> > >> > >> >> > > + movl $(PAGE_SIZE / LARGE_LOAD_SIZE), %ecx
>> > >> > >> >> > > +L(loop_large_memcpy_4x_inner):
>> > >> > >> >> > > + /* Only one prefetch set per page as doing 4
>> pages give more
>> > >> > >> >> > > + time for prefetcher to keep up. */
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi), PAGE_SIZE * 2 +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi), PAGE_SIZE * 3 +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + /* Load vectors from rsi. */
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), PAGE_SIZE * 2, %VMM(8),
>> %VMM(9), %VMM(10), %VMM(11))
>> > >> > >> >> > > + LOAD_ONE_SET ((%rsi), PAGE_SIZE * 3, %VMM(12),
>> %VMM(13), %VMM(14), %VMM(15))
>> > >> > >> >> > > + subq $-LARGE_LOAD_SIZE, %rsi
>> > >> > >> >> > > + /* Non-temporal store vectors to rdi. */
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), PAGE_SIZE * 2, %VMM(8),
>> %VMM(9), %VMM(10), %VMM(11))
>> > >> > >> >> > > + STORE_ONE_SET ((%rdi), PAGE_SIZE * 3, %VMM(12),
>> %VMM(13), %VMM(14), %VMM(15))
>> > >> > >> >> > > + subq $-LARGE_LOAD_SIZE, %rdi
>> > >> > >> >> > > + decl %ecx
>> > >> > >> >> > > + jnz L(loop_large_memcpy_4x_inner)
>> > >> > >> >> > > + addq $(PAGE_SIZE * 3), %rdi
>> > >> > >> >> > > + addq $(PAGE_SIZE * 3), %rsi
>> > >> > >> >> > > + decq %r10
>> > >> > >> >> > > + jne L(loop_large_memcpy_4x_outer)
>> > >> > >> >> > > + sfence
>> > >> > >> >> > > + /* Check if only last 4 loads are needed. */
>> > >> > >> >> > > + cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + jbe L(large_memcpy_4x_end)
>> > >> > >> >> > > +
>> > >> > >> >> > > + /* Handle the last 4 * PAGE_SIZE bytes. */
>> > >> > >> >> > > +L(loop_large_memcpy_4x_tail):
>> > >> > >> >> > > + /* Copy 4 * VEC a time forward with non-temporal
>> stores. */
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + PREFETCH_ONE_SET (1, (%rdi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > + VMOVU (%rsi), %VMM(0)
>> > >> > >> >> > > + VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > + VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > + subq $-(VEC_SIZE * 4), %rsi
>> > >> > >> >> > > + addl $-(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + VMOVA %VMM(0), (%rdi)
>> > >> > >> >> > > + VMOVA %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > + VMOVA %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > + VMOVA %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > + subq $-(VEC_SIZE * 4), %rdi
>> > >> > >> >> > > + cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > + ja L(loop_large_memcpy_4x_tail)
>> > >> > >> >> > > +
>> > >> > >> >> > > +L(large_memcpy_4x_end):
>> > >> > >> >> > > + /* Store the last 4 * VEC. */
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VMM(0)
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VMM(1)
>> > >> > >> >> > > + VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VMM(2)
>> > >> > >> >> > > + VMOVU -VEC_SIZE(%rsi, %rdx), %VMM(3)
>> > >> > >> >> > > +
>> > >> > >> >> > > + VMOVU %VMM(0), -(VEC_SIZE * 4)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(1), -(VEC_SIZE * 3)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(2), -(VEC_SIZE * 2)(%rdi, %rdx)
>> > >> > >> >> > > + VMOVU %VMM(3), -VEC_SIZE(%rdi, %rdx)
>> > >> > >> >> > > + VZEROUPPER_RETURN
>> > >> > >> >> > > +#endif
>> > >> > >> >> > > diff --git
>> a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
>> b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
>> > >> > >> >> > > index 5cd8a6286e..70d303687c 100644
>> > >> > >> >> > > ---
>> a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
>> > >> > >> >> > > +++
>> b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
>> > >> > >> >> > > @@ -34,17 +34,8 @@
>> > >> > >> >> > > __x86_rep_movsb_threshold and less than
>> > >> > >> >> > > __x86_rep_movsb_stop_threshold, then REP MOVSB
>> will be used.
>> > >> > >> >> > > 7. If size >= __x86_shared_non_temporal_threshold
>> and there is no
>> > >> > >> >> > > - overlap between destination and source, use
>> non-temporal store
>> > >> > >> >> > > - instead of aligned store copying from either 2 or
>> 4 pages at
>> > >> > >> >> > > - once.
>> > >> > >> >> > > - 8. For point 7) if size < 16 *
>> __x86_shared_non_temporal_threshold
>> > >> > >> >> > > - and source and destination do not page alias,
>> copy from 2 pages
>> > >> > >> >> > > - at once using non-temporal stores. Page aliasing
>> in this case is
>> > >> > >> >> > > - considered true if destination's page alignment -
>> sources' page
>> > >> > >> >> > > - alignment is less than 8 * VEC_SIZE.
>> > >> > >> >> > > - 9. If size >= 16 *
>> __x86_shared_non_temporal_threshold or source
>> > >> > >> >> > > - and destination do page alias copy from 4 pages
>> at once using
>> > >> > >> >> > > - non-temporal stores. */
>> > >> > >> >> > > + overlap between destination and source, the exact
>> method varies
>> > >> > >> >> > > + and is set with MEMMOVE_VEC_LARGE_IMPL". */
>> > >> > >> >> > >
>> > >> > >> >> > > #include <sysdep.h>
>> > >> > >> >> > >
>> > >> > >> >> > > @@ -95,31 +86,6 @@
>> > >> > >> >> > > # error Unsupported PAGE_SIZE
>> > >> > >> >> > > #endif
>> > >> > >> >> > >
>> > >> > >> >> > > -#ifndef LOG_PAGE_SIZE
>> > >> > >> >> > > -# define LOG_PAGE_SIZE 12
>> > >> > >> >> > > -#endif
>> > >> > >> >> > > -
>> > >> > >> >> > > -#if PAGE_SIZE != (1 << LOG_PAGE_SIZE)
>> > >> > >> >> > > -# error Invalid LOG_PAGE_SIZE
>> > >> > >> >> > > -#endif
>> > >> > >> >> > > -
>> > >> > >> >> > > -/* Byte per page for large_memcpy inner loop. */
>> > >> > >> >> > > -#if VEC_SIZE == 64
>> > >> > >> >> > > -# define LARGE_LOAD_SIZE (VEC_SIZE * 2)
>> > >> > >> >> > > -#else
>> > >> > >> >> > > -# define LARGE_LOAD_SIZE (VEC_SIZE * 4)
>> > >> > >> >> > > -#endif
>> > >> > >> >> > > -
>> > >> > >> >> > > -/* Amount to shift __x86_shared_non_temporal_threshold
>> by for
>> > >> > >> >> > > - bound for memcpy_large_4x. This is essentially use
>> to to
>> > >> > >> >> > > - indicate that the copy is far beyond the scope of L3
>> > >> > >> >> > > - (assuming no user config x86_non_temporal_threshold)
>> and to
>> > >> > >> >> > > - use a more aggressively unrolled loop. NB: before
>> > >> > >> >> > > - increasing the value also update initialization of
>> > >> > >> >> > > - x86_non_temporal_threshold. */
>> > >> > >> >> > > -#ifndef LOG_4X_MEMCPY_THRESH
>> > >> > >> >> > > -# define LOG_4X_MEMCPY_THRESH 4
>> > >> > >> >> > > -#endif
>> > >> > >> >> > >
>> > >> > >> >> > > /* Avoid short distance rep movsb only with non-SSE
>> vector. */
>> > >> > >> >> > > #ifndef AVOID_SHORT_DISTANCE_REP_MOVSB
>> > >> > >> >> > > @@ -160,26 +126,8 @@
>> > >> > >> >> > > # error Unsupported PREFETCH_SIZE!
>> > >> > >> >> > > #endif
>> > >> > >> >> > >
>> > >> > >> >> > > -#if LARGE_LOAD_SIZE == (VEC_SIZE * 2)
>> > >> > >> >> > > -# define LOAD_ONE_SET(base, offset, vec0, vec1, ...) \
>> > >> > >> >> > > - VMOVU (offset)base, vec0; \
>> > >> > >> >> > > - VMOVU ((offset) + VEC_SIZE)base, vec1;
>> > >> > >> >> > > -# define STORE_ONE_SET(base, offset, vec0, vec1, ...) \
>> > >> > >> >> > > - VMOVNT vec0, (offset)base; \
>> > >> > >> >> > > - VMOVNT vec1, ((offset) + VEC_SIZE)base;
>> > >> > >> >> > > -#elif LARGE_LOAD_SIZE == (VEC_SIZE * 4)
>> > >> > >> >> > > -# define LOAD_ONE_SET(base, offset, vec0, vec1, vec2,
>> vec3) \
>> > >> > >> >> > > - VMOVU (offset)base, vec0; \
>> > >> > >> >> > > - VMOVU ((offset) + VEC_SIZE)base, vec1; \
>> > >> > >> >> > > - VMOVU ((offset) + VEC_SIZE * 2)base, vec2; \
>> > >> > >> >> > > - VMOVU ((offset) + VEC_SIZE * 3)base, vec3;
>> > >> > >> >> > > -# define STORE_ONE_SET(base, offset, vec0, vec1, vec2,
>> vec3) \
>> > >> > >> >> > > - VMOVNT vec0, (offset)base; \
>> > >> > >> >> > > - VMOVNT vec1, ((offset) + VEC_SIZE)base; \
>> > >> > >> >> > > - VMOVNT vec2, ((offset) + VEC_SIZE * 2)base; \
>> > >> > >> >> > > - VMOVNT vec3, ((offset) + VEC_SIZE * 3)base;
>> > >> > >> >> > > -#else
>> > >> > >> >> > > -# error Invalid LARGE_LOAD_SIZE
>> > >> > >> >> > > +#ifndef MEMMOVE_VEC_LARGE_IMPL
>> > >> > >> >> > > +# define MEMMOVE_VEC_LARGE_IMPL
>> "memmove-vec-large-page-unrolled.S"
>> > >> > >> >> > > #endif
>> > >> > >> >> > >
>> > >> > >> >> > > #ifndef SECTION
>> > >> > >> >> > > @@ -426,7 +374,7 @@ L(more_8x_vec):
>> > >> > >> >> > > #if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN
>> (libc)
>> > >> > >> >> > > /* Check non-temporal store threshold. */
>> > >> > >> >> > > cmp
>> __x86_shared_non_temporal_threshold(%rip), %RDX_LP
>> > >> > >> >> > > - ja L(large_memcpy_2x)
>> > >> > >> >> > > + ja L(large_memcpy)
>> > >> > >> >> > > #endif
>> > >> > >> >> > > /* To reach this point there cannot be overlap
>> and dst > src. So
>> > >> > >> >> > > check for overlap and src > dst in which case
>> correctness
>> > >> > >> >> > > @@ -613,7 +561,7 @@ L(movsb):
>> > >> > >> >> > > /* If above __x86_rep_movsb_stop_threshold most
>> likely is
>> > >> > >> >> > > candidate for NT moves as well. */
>> > >> > >> >> > > cmp __x86_rep_movsb_stop_threshold(%rip),
>> %RDX_LP
>> > >> > >> >> > > - jae L(large_memcpy_2x_check)
>> > >> > >> >> > > + jae L(large_memcpy_check)
>> > >> > >> >> > > # if AVOID_SHORT_DISTANCE_REP_MOVSB || ALIGN_MOVSB
>> > >> > >> >> > > /* Only avoid short movsb if CPU has FSRM. */
>> > >> > >> >> > > # if X86_STRING_CONTROL_AVOID_SHORT_DISTANCE_REP_MOVSB
>> < 256
>> > >> > >> >> > > @@ -673,214 +621,8 @@ L(skip_short_movsb_check):
>> > >> > >> >> > > # endif
>> > >> > >> >> > > #endif
>> > >> > >> >> > >
>> > >> > >> >> > > - .p2align 4,, 10
>> > >> > >> >> > > -#if (defined USE_MULTIARCH || VEC_SIZE == 16) && IS_IN
>> (libc)
>> > >> > >> >> > > -L(large_memcpy_2x_check):
>> > >> > >> >> > > - /* Entry from L(large_memcpy_2x) has a redundant
>> load of
>> > >> > >> >> > > - __x86_shared_non_temporal_threshold(%rip).
>> L(large_memcpy_2x)
>> > >> > >> >> > > - is only use for the non-erms memmove which is
>> generally less
>> > >> > >> >> > > - common. */
>> > >> > >> >> > > -L(large_memcpy_2x):
>> > >> > >> >> > > - mov
>> __x86_shared_non_temporal_threshold(%rip), %R11_LP
>> > >> > >> >> > > - cmp %R11_LP, %RDX_LP
>> > >> > >> >> > > - jb L(more_8x_vec_check)
>> > >> > >> >> > > - /* To reach this point it is impossible for dst
>> > src and
>> > >> > >> >> > > - overlap. Remaining to check is src > dst and
>> overlap. rcx
>> > >> > >> >> > > - already contains dst - src. Negate rcx to get
>> src - dst. If
>> > >> > >> >> > > - length > rcx then there is overlap and
>> forward copy is best. */
>> > >> > >> >> > > - negq %rcx
>> > >> > >> >> > > - cmpq %rcx, %rdx
>> > >> > >> >> > > - ja L(more_8x_vec_forward)
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* Cache align destination. First store the
>> first 64 bytes then
>> > >> > >> >> > > - adjust alignments. */
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* First vec was also loaded into VEC(0). */
>> > >> > >> >> > > -# if VEC_SIZE < 64
>> > >> > >> >> > > - VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > -# if VEC_SIZE < 32
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > -# endif
>> > >> > >> >> > > -# endif
>> > >> > >> >> > > - VMOVU %VMM(0), (%rdi)
>> > >> > >> >> > > -# if VEC_SIZE < 64
>> > >> > >> >> > > - VMOVU %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > -# if VEC_SIZE < 32
>> > >> > >> >> > > - VMOVU %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > - VMOVU %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > -# endif
>> > >> > >> >> > > -# endif
>> > >> > >> >> > > +#include MEMMOVE_VEC_LARGE_IMPL
>> > >> > >> >> > >
>> > >> > >> >> > > - /* Adjust source, destination, and size. */
>> > >> > >> >> > > - movq %rdi, %r8
>> > >> > >> >> > > - andq $63, %r8
>> > >> > >> >> > > - /* Get the negative of offset for alignment. */
>> > >> > >> >> > > - subq $64, %r8
>> > >> > >> >> > > - /* Adjust source. */
>> > >> > >> >> > > - subq %r8, %rsi
>> > >> > >> >> > > - /* Adjust destination which should be aligned
>> now. */
>> > >> > >> >> > > - subq %r8, %rdi
>> > >> > >> >> > > - /* Adjust length. */
>> > >> > >> >> > > - addq %r8, %rdx
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* Test if source and destination addresses will
>> alias. If they
>> > >> > >> >> > > - do the larger pipeline in large_memcpy_4x
>> alleviated the
>> > >> > >> >> > > - performance drop. */
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* ecx contains -(dst - src). not ecx will
>> return dst - src - 1
>> > >> > >> >> > > - which works for testing aliasing. */
>> > >> > >> >> > > - notl %ecx
>> > >> > >> >> > > - movq %rdx, %r10
>> > >> > >> >> > > - testl $(PAGE_SIZE - VEC_SIZE * 8), %ecx
>> > >> > >> >> > > - jz L(large_memcpy_4x)
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* r11 has __x86_shared_non_temporal_threshold.
>> Shift it left
>> > >> > >> >> > > - by LOG_4X_MEMCPY_THRESH to get
>> L(large_memcpy_4x) threshold.
>> > >> > >> >> > > - */
>> > >> > >> >> > > - shlq $LOG_4X_MEMCPY_THRESH, %r11
>> > >> > >> >> > > - cmp %r11, %rdx
>> > >> > >> >> > > - jae L(large_memcpy_4x)
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* edx will store remainder size for copying
>> tail. */
>> > >> > >> >> > > - andl $(PAGE_SIZE * 2 - 1), %edx
>> > >> > >> >> > > - /* r10 stores outer loop counter. */
>> > >> > >> >> > > - shrq $(LOG_PAGE_SIZE + 1), %r10
>> > >> > >> >> > > - /* Copy 4x VEC at a time from 2 pages. */
>> > >> > >> >> > > - .p2align 4
>> > >> > >> >> > > -L(loop_large_memcpy_2x_outer):
>> > >> > >> >> > > - /* ecx stores inner loop counter. */
>> > >> > >> >> > > - movl $(PAGE_SIZE / LARGE_LOAD_SIZE), %ecx
>> > >> > >> >> > > -L(loop_large_memcpy_2x_inner):
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PREFETCHED_LOAD_SIZE
>> * 2)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE * 2)
>> > >> > >> >> > > - /* Load vectors from rsi. */
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > - subq $-LARGE_LOAD_SIZE, %rsi
>> > >> > >> >> > > - /* Non-temporal store vectors to rdi. */
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > - subq $-LARGE_LOAD_SIZE, %rdi
>> > >> > >> >> > > - decl %ecx
>> > >> > >> >> > > - jnz L(loop_large_memcpy_2x_inner)
>> > >> > >> >> > > - addq $PAGE_SIZE, %rdi
>> > >> > >> >> > > - addq $PAGE_SIZE, %rsi
>> > >> > >> >> > > - decq %r10
>> > >> > >> >> > > - jne L(loop_large_memcpy_2x_outer)
>> > >> > >> >> > > - sfence
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* Check if only last 4 loads are needed. */
>> > >> > >> >> > > - cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - jbe L(large_memcpy_2x_end)
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* Handle the last 2 * PAGE_SIZE bytes. */
>> > >> > >> >> > > -L(loop_large_memcpy_2x_tail):
>> > >> > >> >> > > - /* Copy 4 * VEC a time forward with non-temporal
>> stores. */
>> > >> > >> >> > > - PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET (1, (%rdi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - VMOVU (%rsi), %VMM(0)
>> > >> > >> >> > > - VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > - subq $-(VEC_SIZE * 4), %rsi
>> > >> > >> >> > > - addl $-(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - VMOVA %VMM(0), (%rdi)
>> > >> > >> >> > > - VMOVA %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > - VMOVA %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > - VMOVA %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > - subq $-(VEC_SIZE * 4), %rdi
>> > >> > >> >> > > - cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - ja L(loop_large_memcpy_2x_tail)
>> > >> > >> >> > > -
>> > >> > >> >> > > -L(large_memcpy_2x_end):
>> > >> > >> >> > > - /* Store the last 4 * VEC. */
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VMM(0)
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VMM(1)
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VMM(2)
>> > >> > >> >> > > - VMOVU -VEC_SIZE(%rsi, %rdx), %VMM(3)
>> > >> > >> >> > > -
>> > >> > >> >> > > - VMOVU %VMM(0), -(VEC_SIZE * 4)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(1), -(VEC_SIZE * 3)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(2), -(VEC_SIZE * 2)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(3), -VEC_SIZE(%rdi, %rdx)
>> > >> > >> >> > > - VZEROUPPER_RETURN
>> > >> > >> >> > > -
>> > >> > >> >> > > - .p2align 4
>> > >> > >> >> > > -L(large_memcpy_4x):
>> > >> > >> >> > > - /* edx will store remainder size for copying
>> tail. */
>> > >> > >> >> > > - andl $(PAGE_SIZE * 4 - 1), %edx
>> > >> > >> >> > > - /* r10 stores outer loop counter. */
>> > >> > >> >> > > - shrq $(LOG_PAGE_SIZE + 2), %r10
>> > >> > >> >> > > - /* Copy 4x VEC at a time from 4 pages. */
>> > >> > >> >> > > - .p2align 4
>> > >> > >> >> > > -L(loop_large_memcpy_4x_outer):
>> > >> > >> >> > > - /* ecx stores inner loop counter. */
>> > >> > >> >> > > - movl $(PAGE_SIZE / LARGE_LOAD_SIZE), %ecx
>> > >> > >> >> > > -L(loop_large_memcpy_4x_inner):
>> > >> > >> >> > > - /* Only one prefetch set per page as doing 4
>> pages give more
>> > >> > >> >> > > - time for prefetcher to keep up. */
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE * 2 +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET(1, (%rsi), PAGE_SIZE * 3 +
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - /* Load vectors from rsi. */
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), PAGE_SIZE * 2, %VMM(8),
>> %VMM(9), %VMM(10), %VMM(11))
>> > >> > >> >> > > - LOAD_ONE_SET((%rsi), PAGE_SIZE * 3, %VMM(12),
>> %VMM(13), %VMM(14), %VMM(15))
>> > >> > >> >> > > - subq $-LARGE_LOAD_SIZE, %rsi
>> > >> > >> >> > > - /* Non-temporal store vectors to rdi. */
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), 0, %VMM(0), %VMM(1),
>> %VMM(2), %VMM(3))
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), PAGE_SIZE, %VMM(4),
>> %VMM(5), %VMM(6), %VMM(7))
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), PAGE_SIZE * 2, %VMM(8),
>> %VMM(9), %VMM(10), %VMM(11))
>> > >> > >> >> > > - STORE_ONE_SET((%rdi), PAGE_SIZE * 3, %VMM(12),
>> %VMM(13), %VMM(14), %VMM(15))
>> > >> > >> >> > > - subq $-LARGE_LOAD_SIZE, %rdi
>> > >> > >> >> > > - decl %ecx
>> > >> > >> >> > > - jnz L(loop_large_memcpy_4x_inner)
>> > >> > >> >> > > - addq $(PAGE_SIZE * 3), %rdi
>> > >> > >> >> > > - addq $(PAGE_SIZE * 3), %rsi
>> > >> > >> >> > > - decq %r10
>> > >> > >> >> > > - jne L(loop_large_memcpy_4x_outer)
>> > >> > >> >> > > - sfence
>> > >> > >> >> > > - /* Check if only last 4 loads are needed. */
>> > >> > >> >> > > - cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - jbe L(large_memcpy_4x_end)
>> > >> > >> >> > > -
>> > >> > >> >> > > - /* Handle the last 4 * PAGE_SIZE bytes. */
>> > >> > >> >> > > -L(loop_large_memcpy_4x_tail):
>> > >> > >> >> > > - /* Copy 4 * VEC a time forward with non-temporal
>> stores. */
>> > >> > >> >> > > - PREFETCH_ONE_SET (1, (%rsi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - PREFETCH_ONE_SET (1, (%rdi),
>> PREFETCHED_LOAD_SIZE)
>> > >> > >> >> > > - VMOVU (%rsi), %VMM(0)
>> > >> > >> >> > > - VMOVU VEC_SIZE(%rsi), %VMM(1)
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 2)(%rsi), %VMM(2)
>> > >> > >> >> > > - VMOVU (VEC_SIZE * 3)(%rsi), %VMM(3)
>> > >> > >> >> > > - subq $-(VEC_SIZE * 4), %rsi
>> > >> > >> >> > > - addl $-(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - VMOVA %VMM(0), (%rdi)
>> > >> > >> >> > > - VMOVA %VMM(1), VEC_SIZE(%rdi)
>> > >> > >> >> > > - VMOVA %VMM(2), (VEC_SIZE * 2)(%rdi)
>> > >> > >> >> > > - VMOVA %VMM(3), (VEC_SIZE * 3)(%rdi)
>> > >> > >> >> > > - subq $-(VEC_SIZE * 4), %rdi
>> > >> > >> >> > > - cmpl $(VEC_SIZE * 4), %edx
>> > >> > >> >> > > - ja L(loop_large_memcpy_4x_tail)
>> > >> > >> >> > > -
>> > >> > >> >> > > -L(large_memcpy_4x_end):
>> > >> > >> >> > > - /* Store the last 4 * VEC. */
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 4)(%rsi, %rdx), %VMM(0)
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 3)(%rsi, %rdx), %VMM(1)
>> > >> > >> >> > > - VMOVU -(VEC_SIZE * 2)(%rsi, %rdx), %VMM(2)
>> > >> > >> >> > > - VMOVU -VEC_SIZE(%rsi, %rdx), %VMM(3)
>> > >> > >> >> > > -
>> > >> > >> >> > > - VMOVU %VMM(0), -(VEC_SIZE * 4)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(1), -(VEC_SIZE * 3)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(2), -(VEC_SIZE * 2)(%rdi, %rdx)
>> > >> > >> >> > > - VMOVU %VMM(3), -VEC_SIZE(%rdi, %rdx)
>> > >> > >> >> > > - VZEROUPPER_RETURN
>> > >> > >> >> > > -#endif
>> > >> > >> >> > > END (MEMMOVE_SYMBOL (__memmove, unaligned_erms))
>> > >> > >> >> > >
>> > >> > >> >> > > #if IS_IN (libc)
>> > >> > >> >> > > --
>> > >> > >> >> > > 2.43.0
>> > >> > >> >> > >
>> > >> > >> >> >
>> > >> > >> >> > For the entire series:
>> > >> > >> >> > I tested this natively on x86_64 when I wrote this, but I
>> no longer
>> > >> > >> >> > have any x86 machines.
>> > >> > >> >> > I re-tested w/ QEMU before re-posting, but I think it
>> would be worthwhile if
>> > >> > >> >> ... if someone could re-check natively before commit (after
>> review has
>> > >> > >> >> been completed).
>> > >> > >> >
>> > >> > >> >
>> > >> > >> > Hi Noah,
>> > >> > >> >
>> > >> > >> > I tested this patch and got geomean regression upto 6% on
>> large data size microbenchmark.
>> > >> > >> >
>> > >> > >> > Thanks,
>> > >> > >> > Sunil
>> > >> > >>
>> > >> > >> Any impact on SPEC CPU?
>> > >> > >>
>> > >> > >
>> > >> > > Spec2017 regression(502.gcc_r , 520.omnetpp_r) on newer AVX-256
>> system after applying 3 patch sets.
>> > >> > >
>> > >> > > 503.bwaves_r -1%
>> > >> > > 507.cactuBSSN_r -1%
>> > >> > > 508.namd_r 0%
>> > >> > > 510.parest_r 0%
>> > >> > > 511.povray_r 0%
>> > >> > > 519.lbm_r 0%
>> > >> > > 521.wrf_r 0%
>> > >> > > 526.blender_r 1%
>> > >> > > 527.cam4_r 1%
>> > >> > > 538.imagick_r 0%
>> > >> > > 544.nab_r 0%
>> > >> > > 549.fotonik3d_r 1%
>> > >> > > 554.roms_r 0%
>> > >> > > 500.perlbench_r 0%
>> > >> > > 502.gcc_r -2%
>> > >> > > 505.mcf_r 0%
>> > >> > > 520.omnetpp_r -3%
>> > >> > > 523.xalancbmk_r 1%
>> > >> > > 525.x264_r -1%
>> > >> > > 531.deepsjeng_r 0%
>> > >> > > 541.leela_r 0%
>> > >> > > 548.exchange2_r 0%
>> > >> > > 557.xz_r -1%
>> > >> >
>> > >> > That's possibly within the noise, but as discussed, this should be
>> > >> > handled in a follow up
>> > >> > by adjusting the preferred implementation on whatever newer system
>> you
>> > >> > had in mind.
>> > >>
>> > >>
>> > >> Alternatively, you can give me a list of CPUs you would prefer to
>> keep the old
>> > >> behavior on.
>> > >> I do think it should be CPU by CPU w/ strong benchmarks to support
>> it,
>> > >> but if you
>> > >> want more aggressive continuation of current behavior on Intel
>> machines that is
>> > >> understandable too.
>> > >>
>> > >> I will note, before leaving Intel I did do some SPR benchmarks of
>> page unrolled
>> > >> vs normal loop:
>> > >>
>> > >>
>> https://docs.google.com/spreadsheets/d/1-8M-VNeERLxzsghX3CnYUS09pURckmAJLcUkAzTJaVE/edit?usp=sharing
>> > >>
>> > >> Comparing NT vs NT_4x. Lower numbers are better.
>> > >> (CD is movdir64 just for reference).
>> > >>
>> > >> The benchmark code does slightly vary from what we have in GLIBC,
>> > >> but I take it as evidence that it is not clear we should blindly be
>> continuing
>> > >> the page unrolled implementation.
>> > >>
>> > >>
>> > >>
>> > >> > >
>> > >> > > --Sunil
>> > >> > >
>> > >> > >>
>> > >> > >> --
>> > >> > >> H.J.
>> >
>> >
>> >
>> > --
>> > H.J.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://sourceware.org/pipermail/libc-alpha/attachments/20251128/c3e9146c/attachment-0001.htm>
More information about the Libc-alpha
mailing list