[PATCH v2] nptl: Add backoff mechanism to spinlock loop
Noah Goldstein
goldstein.w.n@gmail.com
Wed Mar 30 19:39:40 GMT 2022
On Wed, Mar 30, 2022 at 6:45 AM Guo, Wangyang <wangyang.guo@intel.com> wrote:
>
> On 3/29/2022 12:41 AM, Noah Goldstein via Libc-alpha wrote:
> > On Mon, Mar 28, 2022 at 3:47 AM Wangyang Guo <wangyang.guo@intel.com> wrote:
> >>
> >> When mutiple threads waiting for lock at the same time, once lock owner
> >> releases the lock, waiters will see lock available and all try to lock,
> >> which may cause an expensive CAS storm.
> >>
> >> Binary exponential backoff with random jitter is introduced. As try-lock
> >> attempt increases, there is more likely that a larger number threads
> >> compete for adaptive mutex lock, so increase wait time in exponential.
> >> A random jitter is also added to avoid synchronous try-lock from other
> >> threads.
> >>
> >> v2: Remove read-check before try-lock for performance.
> >>
> >> Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
> >> ---
> >> nptl/pthread_mutex_lock.c | 25 ++++++++++++++++---------
> >> 1 file changed, 16 insertions(+), 9 deletions(-)
> >>
> >> diff --git a/nptl/pthread_mutex_lock.c b/nptl/pthread_mutex_lock.c
> >> index d2e652d151..7e75ec1cba 100644
> >> --- a/nptl/pthread_mutex_lock.c
> >> +++ b/nptl/pthread_mutex_lock.c
> >> @@ -26,6 +26,7 @@
> >> #include <futex-internal.h>
> >> #include <stap-probe.h>
> >> #include <shlib-compat.h>
> >> +#include <random-bits.h>
> >>
> >> /* Some of the following definitions differ when pthread_mutex_cond_lock.c
> >> includes this file. */
> >> @@ -64,11 +65,6 @@ lll_mutex_lock_optimized (pthread_mutex_t *mutex)
> >> # define PTHREAD_MUTEX_VERSIONS 1
> >> #endif
> >>
> >> -#ifndef LLL_MUTEX_READ_LOCK
> >> -# define LLL_MUTEX_READ_LOCK(mutex) \
> >> - atomic_load_relaxed (&(mutex)->__data.__lock)
> >> -#endif
> >> -
> >> static int __pthread_mutex_lock_full (pthread_mutex_t *mutex)
> >> __attribute_noinline__;
> >>
> >> @@ -138,17 +134,28 @@ PTHREAD_MUTEX_LOCK (pthread_mutex_t *mutex)
> >> int cnt = 0;
> >> int max_cnt = MIN (max_adaptive_count (),
> >> mutex->__data.__spins * 2 + 10);
> >> + int spin_count, exp_backoff = 1;
> >> + unsigned int jitter = random_bits ();
> >> do
> >> {
> >> - if (cnt++ >= max_cnt)
> >> + /* In each loop, spin count is exponential backoff plus
> >> + random jitter, random range is [0, exp_backoff-1]. */
> >> + spin_count = exp_backoff + (jitter & (exp_backoff - 1));
> >> + cnt += spin_count;
> >> + if (cnt >= max_cnt)
> >> {
> >> + /* If cnt exceeds max spin count, just go to wait
> >> + queue. */
> >> LLL_MUTEX_LOCK (mutex);
> >> break;
> >> }
> >> - atomic_spin_nop ();
> >> + do
> >> + atomic_spin_nop ();
> >> + while (--spin_count > 0);
> >> + /* Binary exponential backoff, prepare for next loop. */
> >> + exp_backoff <<= 1;
> >> }
> >> - while (LLL_MUTEX_READ_LOCK (mutex) != 0
> >> - || LLL_MUTEX_TRYLOCK (mutex) != 0);
> >> + while (LLL_MUTEX_TRYLOCK (mutex) != 0);
> >
> > Does it perform better w.o the read?
> >
> > In general can you post some benchmarks varying the number of threads / size of
> > the critical section? Would also be nice if you could collect some
> > stats regarding
> > the average number of failed CAS attempts before/after.
>
> I work out a mutex bench:
> https://gist.github.com/guowangy/459085e5be6bfeda101c591d2d2304c5
> It can test with different threads and critical section (critical length
> determined by num of pause instructions).
Can you add a benchmark to glibc? Also you are compiling w.o
optimizations on.
>
> Here is the result of v1 against upstream:
> (Tested in Xeon 8380)
>
> npause 1 4 16 64 128 <== thread num
> --------------------------------------------
> 0 1.00 1.70 1.94 1.70 1.76
> 1 0.99 1.57 1.75 1.54 1.58
> 4 1.00 1.28 1.42 1.38 1.41
> 16 1.00 1.02 1.11 1.18 1.19
> 64 1.00 1.00 0.95 0.99 0.97
> 128 1.00 0.92 0.92 0.87 0.87
I was able to essentially reproduce this.
Maybe in light of these changes `max_cnt` needs to a new threshold.
Also maybe instead of `cnt += spin_count` it should stay `cnt++` so we don't
hit the futex so eagerly.
>
> The first row header is number of threads.
> The first column is num of pause, which represents different critical
> section sizes.
> The value is the rate of v1/upstream throughput (High Is Better).
> RSD varies by thread num: thread(4, 16) < 2%, thread(1, 64, 128) < 1%.
>
> Thread=1 is the baseline and should be the same for the both.
> Backoff works well when critical section is small.
> But it cause some regression when critical section is very large,
> because of upstream using frequently attempt to reduce the latency.
> Since adaptive is aimed for 'quick' locks, I think it's not a big
> problem here.
>
> The next is v2 against v1:
> 1 4 16 64 128
> --------------------------------------------
> 0 1.00 0.99 0.95 1.02 1.02
> 1 1.00 1.08 0.92 1.04 1.04
> 4 1.00 0.94 0.94 1.05 1.04
> 16 1.00 1.01 0.98 1.03 1.03
> 64 1.00 1.01 1.00 1.00 1.01
> 128 1.00 1.02 1.00 1.00 1.00
>
> v2 without read-check can have benefit in large thread num, but have
> drawback in small thread num.
>
I am seeing a pretty significant benefit in keeping the read check
on my Tigerlake (only measuring up to 16 threads as its an 8-core
machine).
W/ read check:
[pause: 0, thread: 1] -- Throughput: 76528393 ops/s RSD: 4.55%
[pause: 0, thread: 4] -- Throughput: 28065221 ops/s RSD: 1.58%
[pause: 0, thread: 8] -- Throughput: 14757408 ops/s RSD: 1.86%
[pause: 0, thread: 16] -- Throughput: 15501579 ops/s RSD: 1.06%
w/o read check:
[pause: 0, thread: 1] -- Throughput: 71303250 ops/s RSD: 4.98%
[pause: 0, thread: 4] -- Throughput: 11308910 ops/s RSD: 8.96%
[pause: 0, thread: 8] -- Throughput: 7380217 ops/s RSD: 5.52%
[pause: 0, thread: 16] -- Throughput: 8253073 ops/s RSD: 2.19%
> I also have a version with random jitter removed (v3), here is the
> result of v3 against v1:
> 1 4 16 64 128
> --------------------------------------------
> 0 1.00 0.95 1.04 1.02 1.03
> 1 1.01 1.09 1.04 1.02 1.03
> 4 1.00 1.02 1.05 1.02 1.02
> 16 1.00 1.01 1.01 1.02 1.02
> 64 1.00 1.04 1.02 1.01 1.01
> 128 1.00 0.98 0.99 0.99 0.98
>
> The result shows without random is a better solution.
>
> >>
> >> mutex->__data.__spins += (cnt - mutex->__data.__spins) / 8;
> >> }
> >> --
> >> 2.35.1
> >>
> >
>
More information about the Libc-alpha
mailing list