nptl/test-*-printers tests failing

[Steve Ellcey]

On Sat, 2016-12-17 at 12:37 -0300, Martin Galvan wrote:
> 2016-12-16 20:54 GMT-03:00 Steve Ellcey <sellcey@caviumnetworks.com>:
> > 
> > And just after sending the email I found the problem.  On the machine
> > I was testing there is no /usr/bin/python.  There is /usr/bin/python3
> > which is why I could run build-many-glibcs.py but there was no
> > /usr/bin/python.
> Does that apply to the UNSUPPORTED tests as well? There are a few
> things that can make the tests fail with that code, namely an
> old/absent gdb/python/pexpect, etc. Do the .out files show you
> anything on x86_64?

Yes, the x86 out files contain:

% more test-condattr-printers.out
PExpect 4.0 or newer must be installed to test the pretty printers.


I don't have pexpect installed, but at least with this problem I get
UNSUPPORTED and not FAIL.

Steve Ellcey
sellcey@caviumnetworks.com