[PATCH 2/2] Use cached offset in ftell when reliable
Siddhesh Poyarekar
siddhesh@redhat.com
Tue Mar 4 07:04:00 GMT 2014
On Tue, Mar 04, 2014 at 12:31:22AM -0500, Carlos O'Donell wrote:
> I assume that by "unbuffered data" you mean "there is IO outstanding
> that has been sent to the kernel but that IO has not been flushed yet."
> Thus an active stream is one in which we have in-flight IO that has
> not yet completed e.g. not yet flushed.
That should have been 'unflushed data', not 'unbuffered data', i.e. we
have data in the stream buffer that we haven't flushed yet. I've
fixed up the description and comments. I'll do a fixup of comments in
the first patch too.
> The cached offset is reliable in this case because the kernel is
> committed to completing the IO and therefore we know the exact final
> position in the stream. When I say "committed to completing the IO"
> I mean that the write syscall completed to the underlying fd without
> error and it was not asynchronous IO.
>
> In the case of a+ mode, it would seem we don't care to track the
> cached offset because the kernel's O_APPEND infrastructure does this
> work for us, always writing to the end of the file anyway. Therefore
> the cached offset is an unreliable indicator of current position to
> use with ftell.
Right.
> > +
> > + /* It is safe to use the cached offset when available if there is
> > + unbuffered data (indicating that the file handle is active) and the
> > + handle is not for a file open in a+ mode. The latter condition is
> > + because there could be a scenario where there is a switch from read
> > + mode to write mode using an fseek to an arbitrary position. In this
> > + case, there would be unbuffered data due to be appended to the end of
> > + the file, but the offset may not necessarily be the end of the
> > + file. It is fine to use the cached offset when the a+ stream is in
> > + read mode though, since the offset is maintained correctly in that
>
> Just to be clear this is because we rely on O_APPEND being handled in the
> kernel? If we implemented O_APPEND in userspace, like the kernel does for
> NFS, it would not reliably append to the file in the presence of multiple
> writers, *but* we would have an accurate cached offset in the library.
I didn't know that O_APPEND was done in userspace for NFS.
Even then our cached offset would not always be correct unless we
explicitly try to make it so. This would be seen when we switch from
read mode to write mode on an a+ file. Unless we explicitly move the
file descriptor offset to the end of file using lseek and refresh the
offset cache, we would see the offset as being somewhere in the middle
of the file instead of at the end of the file.
> > + case. Note that this is not a comprehensive set of cases when the
> > + offset is reliable. The offset may be reliable even in some cases
> > + where there is no buffered input and the handle is active, but it's
> > + just that we don't have a way to identify that condition reliably. */
>
> s/no buffered/unbuffered/g
I've used 'no unflushed input' since that describes the situation more
accurately.
> > - /* Set up initially to use the `maybe_mmap' jump tables rather than using
> > - __fopen_maybe_mmap to do it, because we need them in place before we
> > - call _IO_file_attach or else it will allocate a buffer immediately. */
>
> Why are you removing this? Because we remove the call to _IO_file_attach?
Yes, the comment didn't seem relevant anymore. Using the maybe_mmap
jump tables is still necessary - I haven't figured out why, but it
broke during testing.
> I don't follow this comment, could you expand on that a little.
>
> The offset and the fd are related in that you could get the former
> from the latter, is that why we record it here? For later use?
The comment was badly worded. I meant to say two things: first being
that unsetting the offset is important so that other functions don't
rely on it and the second being that the offset is already unset, so
we just need to set the fd. I have updated the comment to (hopefully)
be a bit clearer.
> Try to leave out formatting changes.
Ack, I've split it into a different commit.
This is what I have finally committed.
Siddhesh
commit fa3cd24827d34a49e0a3a5cac56abbf8df74d8ac
Author: Siddhesh Poyarekar <siddhesh@redhat.com>
Date: Tue Mar 4 12:23:27 2014 +0530
Use cached offset in ftell when reliable
The cached offset is reliable to use in ftell when the stream handle
is active. We can consider a stream as being active when there is
unflushed data. However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.
There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position. This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.
A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets. There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek. I have removed this as well.
The testsuite passes successfully with these changes on x86_64.
diff --git a/ChangeLog b/ChangeLog
index d8d87d7..b1ccca4 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,12 @@
2014-03-04 Siddhesh Poyarekar <siddhesh@redhat.com>
+ * libio/fileops.c (do_ftell): Use cached offset when
+ available.
+ * libio/iofwide.c (do_ftell_wide): Likewise.
+ * libio/iofdopen.c (_IO_new_fdopen): Don't use
+ _IO_file_attach.
+ * libio/wfileops.c (_IO_fwide): Don't cache offset.
+
[BZ #16532]
* libio/libioP.h (get_file_offset): New function.
* libio/fileops.c (get_file_offset): Likewise.
diff --git a/libio/fileops.c b/libio/fileops.c
index 5006295..2e7bc8d 100644
--- a/libio/fileops.c
+++ b/libio/fileops.c
@@ -964,12 +964,8 @@ get_file_offset (_IO_FILE *fp)
static _IO_off64_t
do_ftell (_IO_FILE *fp)
{
- _IO_off64_t result;
-
- result = get_file_offset (fp);
-
- if (result == EOF)
- return result;
+ _IO_off64_t result = 0;
+ bool use_cached_offset = false;
/* No point looking at unflushed data if we haven't allocated buffers
yet. */
@@ -983,8 +979,34 @@ do_ftell (_IO_FILE *fp)
result -= fp->_IO_read_end - fp->_IO_read_ptr;
else
result += fp->_IO_write_ptr - fp->_IO_read_end;
+
+ /* It is safe to use the cached offset when available if there is
+ unbuffered data (indicating that the file handle is active) and the
+ handle is not for a file open in a+ mode. The latter condition is
+ because there could be a scenario where there is a switch from read
+ mode to write mode using an fseek to an arbitrary position. In this
+ case, there would be unbuffered data due to be appended to the end of
+ the file, but the offset may not necessarily be the end of the
+ file. It is fine to use the cached offset when the a+ stream is in
+ read mode though, since the offset is maintained correctly in that
+ case. Note that this is not a comprehensive set of cases when the
+ offset is reliable. The offset may be reliable even in some cases
+ where there is no unflushed input and the handle is active, but it's
+ just that we don't have a way to identify that condition reliably. */
+ use_cached_offset = (result != 0 && fp->_offset != _IO_pos_BAD
+ && ((fp->_flags & (_IO_IS_APPENDING | _IO_NO_READS))
+ == (_IO_IS_APPENDING | _IO_NO_READS)
+ && was_writing));
}
+ if (use_cached_offset)
+ result += fp->_offset;
+ else
+ result += get_file_offset (fp);
+
+ if (result == EOF)
+ return result;
+
if (result < 0)
{
__set_errno (EINVAL);
diff --git a/libio/iofdopen.c b/libio/iofdopen.c
index 066ff19..3f266f7 100644
--- a/libio/iofdopen.c
+++ b/libio/iofdopen.c
@@ -141,9 +141,6 @@ _IO_new_fdopen (fd, mode)
#ifdef _IO_MTSAFE_IO
new_f->fp.file._lock = &new_f->lock;
#endif
- /* Set up initially to use the `maybe_mmap' jump tables rather than using
- __fopen_maybe_mmap to do it, because we need them in place before we
- call _IO_file_attach or else it will allocate a buffer immediately. */
_IO_no_init (&new_f->fp.file, 0, 0, &new_f->wd,
#ifdef _G_HAVE_MMAP
(use_mmap && (read_write & _IO_NO_WRITES))
@@ -159,13 +156,12 @@ _IO_new_fdopen (fd, mode)
#if !_IO_UNIFIED_JUMPTABLES
new_f->fp.vtable = NULL;
#endif
- if (_IO_file_attach ((_IO_FILE *) &new_f->fp, fd) == NULL)
- {
- _IO_setb (&new_f->fp.file, NULL, NULL, 0);
- _IO_un_link (&new_f->fp);
- free (new_f);
- return NULL;
- }
+ /* We only need to record the fd because _IO_file_init will have unset the
+ offset. It is important to unset the cached offset because the real
+ offset in the file could change between now and when the handle is
+ activated and we would then mislead ftell into believing that we have a
+ valid offset. */
+ new_f->fp.file._fileno = fd;
new_f->fp.file._flags &= ~_IO_DELETE_DONT_CLOSE;
_IO_mask_flags (&new_f->fp.file, read_write,
diff --git a/libio/iofwide.c b/libio/iofwide.c
index 5cff632..64187e4 100644
--- a/libio/iofwide.c
+++ b/libio/iofwide.c
@@ -199,12 +199,6 @@ _IO_fwide (fp, mode)
/* From now on use the wide character callback functions. */
((struct _IO_FILE_plus *) fp)->vtable = fp->_wide_data->_wide_vtable;
-
- /* One last twist: we get the current stream position. The wide
- char streams have much more problems with not knowing the
- current position and so we should disable the optimization
- which allows the functions without knowing the position. */
- fp->_offset = _IO_SYSSEEK (fp, 0, _IO_seek_cur);
}
/* Set the mode now. */
diff --git a/libio/wfileops.c b/libio/wfileops.c
index 7f4c923..776bb4a 100644
--- a/libio/wfileops.c
+++ b/libio/wfileops.c
@@ -602,6 +602,7 @@ static _IO_off64_t
do_ftell_wide (_IO_FILE *fp)
{
_IO_off64_t result, offset = 0;
+ bool use_cached_offset = false;
/* No point looking for offsets in the buffer if it hasn't even been
allocated. */
@@ -702,9 +703,31 @@ do_ftell_wide (_IO_FILE *fp)
is fp._offset - (_IO_read_end - new_write_ptr). */
offset -= fp->_IO_read_end - fp->_IO_write_ptr;
}
+
+ /* It is safe to use the cached offset when available if there is
+ unbuffered data (indicating that the file handle is active) and
+ the handle is not for a file open in a+ mode. The latter
+ condition is because there could be a scenario where there is a
+ switch from read mode to write mode using an fseek to an arbitrary
+ position. In this case, there would be unbuffered data due to be
+ appended to the end of the file, but the offset may not
+ necessarily be the end of the file. It is fine to use the cached
+ offset when the a+ stream is in read mode though, since the offset
+ is maintained correctly in that case. Note that this is not a
+ comprehensive set of cases when the offset is reliable. The
+ offset may be reliable even in some cases where there is no
+ unflushed input and the handle is active, but it's just that we
+ don't have a way to identify that condition reliably. */
+ use_cached_offset = (offset != 0 && fp->_offset != _IO_pos_BAD
+ && ((fp->_flags & (_IO_IS_APPENDING | _IO_NO_READS))
+ == (_IO_IS_APPENDING | _IO_NO_READS)
+ && was_writing));
}
- result = get_file_offset (fp);
+ if (use_cached_offset)
+ result = fp->_offset;
+ else
+ result = get_file_offset (fp);
if (result == EOF)
return result;
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/libc-alpha/attachments/20140304/6cab4b00/attachment.sig>
More information about the Libc-alpha
mailing list