From eddy@fericom.net Sat Aug 2 09:13:00 2003 From: eddy@fericom.net (eddy@fericom.net) Date: Sat, 02 Aug 2003 09:13:00 -0000 Subject: insight/234: Cannot change target settings Message-ID: <20030802090344.30093.qmail@sources.redhat.com> >Number: 234 >Category: insight >Synopsis: Cannot change target settings >Confidential: no >Severity: serious >Priority: high >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Sat Aug 02 09:13:00 UTC 2003 >Closed-Date: >Last-Modified: >Originator: 5.0-5 >Release: unknown-1.0 >Organization: >Environment: Debian Linux >Description: When I open the Target Selection dialog, select a target (no matter which one) and arguments/ports/etc. and click OK I get following dialog Box: GDB Error: . This seems to be a bug >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: From pal.frenger@ericsson.com Tue Aug 5 16:43:00 2003 From: pal.frenger@ericsson.com (pal.frenger@ericsson.com) Date: Tue, 05 Aug 2003 16:43:00 -0000 Subject: insight/235: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" and "Next Asm Inst" Message-ID: <20030805163829.11411.qmail@sources.redhat.com> >Number: 235 >Category: insight >Synopsis: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" and "Next Asm Inst" >Confidential: no >Severity: serious >Priority: medium >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Tue Aug 05 16:43:01 UTC 2003 >Closed-Date: >Last-Modified: >Originator: P??l Frenger >Release: Insight-5.3 >Organization: >Environment: sparc-sun-solaris2.8 >Description: Doing "Step" and "Next" doesn't work. Whenever I do "Step" or "Next" I always get the "Step Asm Inst" or the "Next Asm Inst" commands instead. The keybord shortcut S is the same for both "Step" and "Step Asm Inst". Same in thing in the "Control" menu. The keybord shortcut N is the same for both "Next" and "Next Asm Inst". Same in thing in the "Control" menu. If I select "Control -> Next" I get into the asembler stuff. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: From venkatesh@multitech.co.in Wed Aug 20 13:23:00 2003 From: venkatesh@multitech.co.in (venkatesh@multitech.co.in) Date: Wed, 20 Aug 2003 13:23:00 -0000 Subject: insight/236: GUI does not come UP Message-ID: <20030820131533.6520.qmail@sources.redhat.com> >Number: 236 >Category: insight >Synopsis: GUI does not come UP >Confidential: no >Severity: serious >Priority: high >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Wed Aug 20 13:23:01 UTC 2003 >Closed-Date: >Last-Modified: >Originator: Venkatesh >Release: Insight-5.2.1 >Organization: >Environment: Redhat Linux 7.1 ix86 based mother board 128 MB RAM >Description: I was working with insight-5.1.1/insight-5.2.1 for ARM (arm-elf-gdb) for quite some time (GUI was functioning normally). suddenly from 3 days GUI stoped comming (CLI works fine). I have tried installing fresh package, but the result is same (GUI doesnot come up). I am not getting any printfs, If I use PC's GDB to debug arm-elf-gdb # gdb arm-elf-gdb #(gdb)run Program exited normally #() It simply comes out. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: From venkatesh@multitech.co.in Wed Aug 20 13:23:00 2003 From: venkatesh@multitech.co.in (venkatesh@multitech.co.in) Date: Wed, 20 Aug 2003 13:23:00 -0000 Subject: insight/237: GUI does not come UP Message-ID: <20030820131936.10090.qmail@sources.redhat.com> >Number: 237 >Category: insight >Synopsis: GUI does not come UP >Confidential: no >Severity: serious >Priority: high >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Wed Aug 20 13:23:01 UTC 2003 >Closed-Date: >Last-Modified: >Originator: Venkatesh >Release: Insight-5.2.1 >Organization: >Environment: Redhat Linux 7.1 ix86 based mother board 128 MB RAM >Description: I was working with insight-5.1.1/insight-5.2.1 for ARM (arm-elf-gdb) for quite some time (GUI was functioning normally). suddenly from 3 days GUI stoped comming (CLI works fine). I have tried installing fresh package, but the result is same (GUI doesnot come up). I am not getting any printfs, If I use PC's GDB to debug arm-elf-gdb # gdb arm-elf-gdb #(gdb)run Program exited normally #() It simply comes out. >How-To-Repeat: It does not come up any time >Fix: >Release-Note: >Audit-Trail: >Unformatted: From kseitz@sources.redhat.com Wed Aug 20 14:49:00 2003 From: kseitz@sources.redhat.com (kseitz@sources.redhat.com) Date: Wed, 20 Aug 2003 14:49:00 -0000 Subject: insight/237: GUI does not come UP Message-ID: <20030820144911.13194.qmail@sources.redhat.com> Synopsis: GUI does not come UP Responsible-Changed-From-To: unassigned->kseitz Responsible-Changed-By: kseitz Responsible-Changed-When: Wed Aug 20 14:49:11 2003 Responsible-Changed-Why: mine State-Changed-From-To: open->closed State-Changed-By: kseitz State-Changed-When: Wed Aug 20 14:49:11 2003 State-Changed-Why: Duplicate of 236 http://sources.redhat.com/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=insight&pr=237 From kseitz@sources.redhat.com Wed Aug 20 14:51:00 2003 From: kseitz@sources.redhat.com (kseitz@sources.redhat.com) Date: Wed, 20 Aug 2003 14:51:00 -0000 Subject: insight/236: GUI does not come UP Message-ID: <20030820145142.14126.qmail@sources.redhat.com> Synopsis: GUI does not come UP Responsible-Changed-From-To: unassigned->kseitz Responsible-Changed-By: kseitz Responsible-Changed-When: Wed Aug 20 14:51:42 2003 Responsible-Changed-Why: mine State-Changed-From-To: open->closed State-Changed-By: kseitz State-Changed-When: Wed Aug 20 14:51:42 2003 State-Changed-Why: Moved to mailing list http://sources.redhat.com/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=insight&pr=236 From kseitz@sources.redhat.com Wed Aug 20 14:55:00 2003 From: kseitz@sources.redhat.com (kseitz@sources.redhat.com) Date: Wed, 20 Aug 2003 14:55:00 -0000 Subject: insight/235: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" and "Next Asm Inst" Message-ID: <20030820145508.19208.qmail@sources.redhat.com> Synopsis: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" and "Next Asm Inst" Responsible-Changed-From-To: unassigned->kseitz Responsible-Changed-By: kseitz Responsible-Changed-When: Wed Aug 20 14:55:08 2003 Responsible-Changed-Why: mine State-Changed-From-To: open->analyzed State-Changed-By: kseitz State-Changed-When: Wed Aug 20 14:55:08 2003 State-Changed-Why: Your bug report is a little sparse on information, but let me explain what is supposed to happen. When debugging in SOURCE mode, you should step in the source language (i.e. N does "next" for C/C++/Java/etc; "nexti" for assembly). When debugging in MIXED mode or ASSEMBLY mode, N does "nexti" and S does "stepi". When debugging in SRC+ASM mode, N will do "next" if the mouse is in the SRC pane; "nexti" if it is in the ASM pane. So, if the source window is displaying assembly, the only way to single-step one source line is to press the next button on the toolbar or select it from the menu. Have you tried 6.0? http://sources.redhat.com/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=insight&pr=235 From kseitz@sources.redhat.com Wed Aug 20 14:59:00 2003 From: kseitz@sources.redhat.com (kseitz@sources.redhat.com) Date: Wed, 20 Aug 2003 14:59:00 -0000 Subject: insight/234: Cannot change target settings Message-ID: <20030820145925.20731.qmail@sources.redhat.com> Synopsis: Cannot change target settings Responsible-Changed-From-To: unassigned->kseitz Responsible-Changed-By: kseitz Responsible-Changed-When: Wed Aug 20 14:59:25 2003 Responsible-Changed-Why: mine State-Changed-From-To: open->analyzed State-Changed-By: kseitz State-Changed-When: Wed Aug 20 14:59:25 2003 State-Changed-Why: This sounds like an old bug that was fixed a long time ago, but I can't tell, since you haven't reported a version number for the software. I've attached a patch that was checked in a while ago. Try it out. If not, please try/test the 6.0 release. http://sources.redhat.com/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=insight&pr=234 From pal.frenger@ericsson.com Thu Aug 21 06:33:00 2003 From: pal.frenger@ericsson.com (=?ISO-8859-1?Q?P=E5l_Frenger_=28KI/EAB=29?=) Date: Thu, 21 Aug 2003 06:33:00 -0000 Subject: insight/235: "Step" and "Next" doesn't work. Instead I get "S tep Asm Inst" and "Next Asm Inst" Message-ID: <20030821063300.24577.qmail@sources.redhat.com> The following reply was made to PR insight/235; it has been noted by GNATS. From: =?ISO-8859-1?Q?P=E5l_Frenger_=28KI/EAB=29?= To: "'kseitz@sources.redhat.com'" , "'insight-prs@sources.redhat.com'" , "'kseitz@sources.redhat.com'" , "'nobody@sources.redhat.com'" , =?ISO-8859-1?Q?P=E5l_Frenger_=28KI/EAB=29?= , "'insight-gnats@sources.redhat.com'" Cc: Subject: RE: insight/235: "Step" and "Next" doesn't work. Instead I get "S tep Asm Inst" and "Next Asm Inst" Date: Thu, 21 Aug 2003 08:16:54 +0200 Thanks for your reply, Probably it was just me who got confused about the multiple use of the = keaboard shortcuts "S" and "N". I will RTFM now. I didn't know that 6.0 was out. I will try it out. Thanks :-) //P=E5l Frenger -----Original Message----- From: kseitz@sources.redhat.com [mailto:kseitz@sources.redhat.com] Sent: den 20 augusti 2003 16:55 To: insight-prs@sources.redhat.com; kseitz@sources.redhat.com; nobody@sources.redhat.com; P=E5l Frenger (KI/EAB) Subject: Re: insight/235: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" and "Next Asm Inst" Synopsis: "Step" and "Next" doesn't work. Instead I get "Step Asm Inst" = and "Next Asm Inst" Responsible-Changed-From-To: unassigned->kseitz Responsible-Changed-By: kseitz Responsible-Changed-When: Wed Aug 20 14:55:08 2003 Responsible-Changed-Why: mine State-Changed-From-To: open->analyzed State-Changed-By: kseitz State-Changed-When: Wed Aug 20 14:55:08 2003 State-Changed-Why: Your bug report is a little sparse on information, but let me = explain what is supposed to happen. =20 When debugging in SOURCE mode, you should step in the source = language (i.e. N does "next" for C/C++/Java/etc; "nexti" for assembly). =20 When debugging in MIXED mode or ASSEMBLY mode, N does "nexti" and S = does "stepi". =20 When debugging in SRC+ASM mode, N will do "next" if the mouse is in = the SRC pane; "nexti" if it is in the ASM pane. =20 So, if the source window is displaying assembly, the only way to = single-step one source line is to press the next button on the toolbar = or select it from the menu. =20 Have you tried 6.0? http://sources.redhat.com/cgi-bin/gnatsweb.pl?cmd=3Dview%20audit-trail&d= atabase=3Dinsight&pr=3D235 From insight_db@markrinfret.com Thu Sep 4 00:23:00 2003 From: insight_db@markrinfret.com (insight_db@markrinfret.com) Date: Thu, 04 Sep 2003 00:23:00 -0000 Subject: insight/238: Insight 5.3 build fails on Redhat Linux 7.1 Message-ID: <20030904001444.18857.qmail@sources.redhat.com> >Number: 238 >Category: insight >Synopsis: Insight 5.3 build fails on Redhat Linux 7.1 >Confidential: no >Severity: serious >Priority: medium >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Thu Sep 04 00:23:00 UTC 2003 >Closed-Date: >Last-Modified: >Originator: Mark Rinfret >Release: 5.3 >Organization: >Environment: Redhat Linux 7.1; gcc 2.96; binutils-2.10.91.0.2-3; XFree86-4.0.3-5; XFree86-devel-4.0.3-5 >Description: gdb, tk and tix all failed the link. ld complained that it could not find -lX11. Adding "-L/usr/X11R6/lib" before "-lX11" in their respective Makefile(s) solved the problem. >How-To-Repeat: >Fix: Add /usr/X11R6/lib to the library search path. >Release-Note: >Audit-Trail: >Unformatted: From bohdal@pobox.sk Wed Sep 10 08:33:00 2003 From: bohdal@pobox.sk (bohdal@pobox.sk) Date: Wed, 10 Sep 2003 08:33:00 -0000 Subject: insight/239: Problem in gdb - dump memory at ..., in Pascal Message-ID: <20030910083028.9771.qmail@sources.redhat.com> >Number: 239 >Category: insight >Synopsis: Problem in gdb - dump memory at ..., in Pascal >Confidential: no >Severity: serious >Priority: medium >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Wed Sep 10 08:33:00 UTC 2003 >Closed-Date: >Last-Modified: >Originator: bohdal@pobox.sk >Release: GDB 2003-09-02-cvs (cygwin-special) >Organization: >Environment: Win2k, Win95 >Description: I can't dump memory. Address in Memory dialog does not recognize pascal variables and also pascal hex numbers ($123456). I have choose command Dump memody at ... and I have received this message: /netrel/src/gdb-20030901/gdb/utils.c:2738: internal-error: invalid decimal A problem internal to GDB has been detected, further debugging may prove unreliable Quit this debugging session ? When I set language to C or C++ in Console Window, I can dump memory but only with standard C hex format (0x123456)and name variables with uppercase letters. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: From philippecmartin@free.fr Thu Sep 11 10:43:00 2003 From: philippecmartin@free.fr (philippecmartin@free.fr) Date: Thu, 11 Sep 2003 10:43:00 -0000 Subject: insight/240: stopping a program from insight (top left icon) kills X server Message-ID: <20030911103609.26586.qmail@sources.redhat.com> >Number: 240 >Category: insight >Synopsis: stopping a program from insight (top left icon) kills X server >Confidential: no >Severity: serious >Priority: high >Responsible: unassigned >State: open >Class: sw-bug >Submitter-Id: net >Arrival-Date: Thu Sep 11 10:43:01 UTC 2003 >Closed-Date: >Last-Modified: >Originator: Philippe Martin >Release: 5.3 >Organization: >Environment: Mandrake 9.1 / KDE >Description: after succesfully debugging a still running program, if I decide to stop the session by clicking on the stop button (same position as run button); the X server dies and I end up back to the logging prompt >How-To-Repeat: get a program to run then attempt to stop it >Fix: >Release-Note: >Audit-Trail: >Unformatted: