buildbot vs --enable-targets=all

[Mark Wielaard]

Hi,

I enabled --enable-targets=all for all builds on builder.sourceware.org
(with --disable-sim for 32bit gdb builds), which exposed some new
failing tests. I can disable --enable-targets=all again, but maybe it
makes sense to look at the failures and try to fix them.

On fedora-s390x and debian-ppc64 one of the gdb selftests fails
https://builder.sourceware.org/buildbot/#builders/75/builds/783
https://builder.sourceware.org/buildbot/#builders/76/builds/772

Running selftest arm-record.
Process record and replay target doesn't support syscall number
-2036195
Process record does not support instruction 0x7f70ee1d at address 0x0.
Self test failed: self-test failed at ../../binutils-gdb/gdb/arm-
tdep.c:14407

Which is:

  /* 32-bit Thumb-2 instructions.  */
  {
    arm_insn_decode_record arm_record;

    memset (&arm_record, 0, sizeof (arm_insn_decode_record));
    arm_record.gdbarch = gdbarch;

    static const uint16_t insns[] = {
      /* 1d ee 70 7f     mrc    15, 0, r7, cr13, cr0, {3} */
      0xee1d, 0x7f70,
    };

    enum bfd_endian endian = gdbarch_byte_order_for_code (arm_record.gdbarch);
    instruction_reader_thumb reader (endian, insns);
    int ret = decode_insn (reader, &arm_record, THUMB2_RECORD,
                           THUMB2_INSN_SIZE_BYTES);

    SELF_CHECK (ret == 0);
    SELF_CHECK (arm_record.mem_rec_count == 0);
    SELF_CHECK (arm_record.reg_rec_count == 1);
    SELF_CHECK (arm_record.arm_regs[0] == 7);
  }

This seems a big endian issue given the instructions are given as two
16bit numbers.

On debian-ppc64 and fedora-ppc64le there are the following ld failures:
https://builder.sourceware.org/buildbot/#builders/86/builds/343
https://builder.sourceware.org/buildbot/#builders/78/builds/382

extra lines in dump.out starting with "^    40: 0000002c     0
TLS     GLOBAL DEFAULT    9 ie0$"
EOF from /var/lib/buildbot/workers/wildebeest/binutils-debian-
ppc64/binutils-gdb/ld/testsuite/ld-powerpc/tlsexe32.r
FAIL: TLS32 dynamic exec

extra lines in dump.out starting with "^    40: 0000002c     0
TLS     GLOBAL DEFAULT    9 ie0$"
EOF from /var/lib/buildbot/workers/wildebeest/binutils-debian-
ppc64/binutils-gdb/ld/testsuite/ld-powerpc/tlsexe32no.r
FAIL: TLS32 dynamic exec (--no-tls-optimize)

extra lines in dump.out starting with "^    38: 0000002c     0
TLS     GLOBAL DEFAULT    8 ie0$"
EOF from /var/lib/buildbot/workers/wildebeest/binutils-debian-
ppc64/binutils-gdb/ld/testsuite/ld-powerpc/tlsso32.r
FAIL: TLS32 shared

On debian-armhf there are the following gas failures:
https://builder.sourceware.org/buildbot/#builders/80/builds/350

../as-new  -mcpu=cortex-a76ae  -o tmpdir/nop-asm.o
/var/lib/buildbot/workers/wildebeest/binutils-debian-armhf/binutils-
gdb/gas/testsuite/gas/arm/nop-asm.s
Executing on host: sh -c
{/var/lib/buildbot/workers/wildebeest/binutils-debian-armhf/binutils-
build/gas/testsuite/../../binutils/objdump  -d -mcortex-a76ae
tmpdir/nop-asm.o > tmpdir/dump.out 2>dump.tmp}  /dev/null  (timeout =
300)
spawn [open ...]
exited abnormally with 1,
output:/var/lib/buildbot/workers/wildebeest/binutils-debian-
armhf/binutils-build/binutils/.libs/objdump: can't disassemble for
architecture aarch64

FAIL: Assemble and dump for cortex-a76ae CPU

../as-new  -mcpu=cortex-a77  -o tmpdir/nop-asm.o
/var/lib/buildbot/workers/wildebeest/binutils-debian-armhf/binutils-
gdb/gas/testsuite/gas/arm/nop-asm.s
Executing on host: sh -c {../as-new  -mcpu=cortex-a77  -o tmpdir/nop-
asm.o /var/lib/buildbot/workers/wildebeest/binutils-debian-
armhf/binutils-gdb/gas/testsuite/gas/arm/nop-asm.s 2>&1}  /dev/null
dump.tmp (timeout = 300)
spawn [open ...]
/var/lib/buildbot/workers/wildebeest/binutils-debian-armhf/binutils-
build/gas/testsuite/../../binutils/objdump  -d -mcortex-a77 tmpdir/nop-
asm.o > tmpdir/dump.out
Executing on host: sh -c
{/var/lib/buildbot/workers/wildebeest/binutils-debian-armhf/binutils-
build/gas/testsuite/../../binutils/objdump  -d -mcortex-a77 tmpdir/nop-
asm.o > tmpdir/dump.out 2>dump.tmp}  /dev/null  (timeout = 300)
spawn [open ...]
exited abnormally with 1,
output:/var/lib/buildbot/workers/wildebeest/binutils-debian-
armhf/binutils-build/binutils/.libs/objdump: can't disassemble for
architecture aarch64

FAIL: Assemble and dump for cortex-a77 CPU

On fedora-arm64 there is one unexpected failure and pass:
https://builder.sourceware.org/buildbot/#builders/176/builds/37


tmpdir/pr26094-1c.o: in function `foo':
/home/builder/worker/binutils-fedora-arm64/binutils-
gdb/ld/testsuite/ld-elf/pr26094-1c.c:7:(.text+0x4): relocation
truncated to fit: R_AARCH64_LDST64_ABS_LO12_NC against symbol
`__start_FOO@@SOME_VERSION_NAME' defined in FOO section in
tmpdir/pr26094-1
/home/builder/worker/binutils-fedora-arm64/binutils-build/ld/.libs/ld-
new: /home/builder/worker/binutils-fedora-arm64/binutils-
gdb/ld/testsuite/ld-elf/pr26094-1c.c:7: warning: one possible cause of
this error is that the symbol is being referenced in the indicated code
as if it had a larger alignment than was declared where it was defined
collect2: error: ld returned 1 exit status
tmpdir/pr26094-1c.o: in function `foo':
/home/builder/worker/binutils-fedora-arm64/binutils-
gdb/ld/testsuite/ld-elf/pr26094-1c.c:7:(.text+0x4): relocation
truncated to fit: R_AARCH64_LDST64_ABS_LO12_NC against symbol
`__start_FOO@@SOME_VERSION_NAME' defined in FOO section in
tmpdir/pr26094-1
/home/builder/worker/binutils-fedora-arm64/binutils-build/ld/.libs/ld-
new: /home/builder/worker/binutils-fedora-arm64/binutils-
gdb/ld/testsuite/ld-elf/pr26094-1c.c:7: warning: one possible cause of
this error is that the symbol is being referenced in the indicated code
as if it had a larger alignment than was declared where it was defined
collect2: error: ld returned 1 exit status
Unexpected linker warning or error
FAIL: Build pr26094-1

cp tmpdir/libpr19719a.so tmpdir/libpr19719.so
tmpdir/pr19719  
Executing on host: sh -c {tmpdir/pr19719   2>&1}  /dev/null ld.tmp
(timeout = 300)
spawn [open ...]
PASS
PASS
XPASS: Run pr19719 fun undefined

Cheers,

Mark