[PATCH] Change gdbserver to use existing gnulib and libiberty
Tamar Christina
Tamar.Christina@arm.com
Mon Feb 24 14:16:00 GMT 2020
Hi Tom,
We're having trouble building cross toolchains after this change.
Before this we were able to build gdb running on HOST but build gdbserver running on TARGET.
After this change we can no longer do this since you can't link objects from different architectures.
Is this not a supported workflow anymore? Any suggestions how to do this after these changes?
Thanks,
Tamar
> -----Original Message-----
> From: gdb-patches-owner@sourceware.org <gdb-patches-
> owner@sourceware.org> On Behalf Of Tom Tromey
> Sent: Friday, February 7, 2020 10:53 PM
> To: gdb-patches@sourceware.org
> Cc: Tom Tromey <tom@tromey.com>
> Subject: [PATCH] Change gdbserver to use existing gnulib and libiberty
>
> This changes gdbserver so that it no longer builds its own gnulib and libiberty.
> Instead, it now relies on the ones that were already built at the top level.
>
> gdbsupport is still built specially for gdbserver. This is more complicated and
> will be tackled in a subsequent patch.
>
> ChangeLog
> 2020-02-07 Tom Tromey <tom@tromey.com>
>
> * Makefile.in: Rebuild.
> * Makefile.def: Make gdbserver require gnulib and libiberty.
>
> gdbserver/ChangeLog
> 2020-02-07 Tom Tromey <tom@tromey.com>
>
> * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update.
> (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove.
> (all, install-only, uninstall, clean-info, clean)
> (maintainer-clean): Don't recurse.
> (subdir_do, all-lib): Remove.
> ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule.
> (GNULIB_H): Remove.
> (generated_files): Update.
> ($(GNULIB_BUILDDIR)/Makefile): Remove rule.
> * configure: Rebuild.
> * configure.ac: Don't configure gnulib or libiberty.
> (GNULIB): Update.
>
> gdbsupport/ChangeLog
> 2020-02-07 Tom Tromey <tom@tromey.com>
>
> * common-defs.h: Change path to gnulib/config.h.
>
> Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
> ---
> ChangeLog | 5 +
> Makefile.def | 5 +
> Makefile.in | 4 +
> gdbserver/ChangeLog | 15 +++
> gdbserver/Makefile.in | 59 +----------
> gdbserver/configure | 219 +--------------------------------------
> gdbserver/configure.ac | 18 +---
> gdbsupport/ChangeLog | 4 +
> gdbsupport/common-defs.h | 2 +-
> 9 files changed, 40 insertions(+), 291 deletions(-)
>
> diff --git a/Makefile.def b/Makefile.def index 72cb133a09a..2fe8204366c
> 100644
> --- a/Makefile.def
> +++ b/Makefile.def
> @@ -410,6 +410,11 @@ dependencies = { module=all-gdb; on=all-
> libdecnumber; }; dependencies = { module=all-gdb; on=all-libtermcap; };
> dependencies = { module=all-gdb; on=all-libctf; };
>
> +// Host modules specific to gdbserver.
> +dependencies = { module=configure-gdbserver; on=all-gnulib; };
> +dependencies = { module=all-gdbserver; on=all-gnulib; }; dependencies =
> +{ module=all-gdbserver; on=all-libiberty; };
> +
> dependencies = { module=configure-libgui; on=configure-tcl; };
> dependencies = { module=configure-libgui; on=configure-tk; };
> dependencies = { module=all-libgui; on=all-tcl; }; diff --git a/Makefile.in
> b/Makefile.in index 80fa458d8d0..be38b34e9bf 100644
> --- a/Makefile.in
> +++ b/Makefile.in
> @@ -51976,6 +51976,8 @@ all-gdb: maybe-all-readline
> all-gdb: maybe-all-build-bison
> all-gdb: maybe-all-sim
> all-gdb: maybe-all-libtermcap
> +configure-gdbserver: maybe-all-gnulib
> +all-gdbserver: maybe-all-gnulib
> configure-libgui: maybe-configure-tcl
> configure-libgui: maybe-configure-tk
> all-libgui: maybe-all-tcl
> @@ -52427,6 +52429,7 @@ configure-gnattools: stage_last
> configure-libcc1: stage_last
> configure-utils: stage_last
> configure-gdb: stage_last
> +configure-gdbserver: stage_last
> configure-gdbsupport: stage_last
> configure-gprof: stage_last
> configure-sid: stage_last
> @@ -52450,6 +52453,7 @@ all-gdb: maybe-all-libiconv
> all-gdb: maybe-all-opcodes
> all-gdb: maybe-all-libdecnumber
> all-gdb: maybe-all-libctf
> +all-gdbserver: maybe-all-libiberty
> configure-gdbsupport: maybe-configure-bfd
> all-gdbsupport: maybe-all-bfd
> configure-gprof: maybe-configure-intl
> diff --git a/gdbserver/Makefile.in b/gdbserver/Makefile.in index
> 60a52d3412b..e0f50d2f3e4 100644
> --- a/gdbserver/Makefile.in
> +++ b/gdbserver/Makefile.in
> @@ -97,7 +97,7 @@ CC_LD = $(CXX) $(CXX_DIALECT) INCLUDE_DIR =
> ${srcdir}/../include INCLUDE_DEP = $$(INCLUDE_DIR)
>
> -LIBIBERTY_BUILDDIR = build-libiberty-gdbserver
> +LIBIBERTY_BUILDDIR = ../libiberty
> LIBIBERTY = $(LIBIBERTY_BUILDDIR)/libiberty.a
>
> # Where is ust? These will be empty if ust was not available.
> @@ -105,14 +105,10 @@ ustlibs = @ustlibs@ ustinc = @ustinc@
>
> # gnulib
> -GNULIB_BUILDDIR = build-gnulib-gdbserver
> +GNULIB_BUILDDIR = ../gnulib
> LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
> INCGNU = -I$(srcdir)/../gnulib/import -I$(GNULIB_BUILDDIR)/import
>
> -# Generated headers in the gnulib directory. These must be listed -# so that
> they are generated before other files are compiled.
> -GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
> -
> INCSUPPORT = -I$(srcdir)/.. -I..
>
> # All the includes used for CFLAGS and for lint.
> @@ -329,15 +325,6 @@ XML_BUILTIN = @srv_xmlbuiltin@ IPA_DEPFILES =
> @IPA_DEPFILES@ extra_libraries = @extra_libraries@
>
> -SUBDIRS = $(GNULIB_BUILDDIR) $(LIBIBERTY_BUILDDIR) -CLEANDIRS =
> $(SUBDIRS)
> -
> -# List of subdirectories in the build tree that must exist.
> -# This is used to force build failures in existing trees when -# a new directory
> is added.
> -# The format here is for the `case' shell command.
> -REQUIRED_SUBDIRS = $(GNULIB_BUILDDIR) | $(LIBIBERTY_BUILDDIR)
> -
> FLAGS_TO_PASS = \
> "prefix=$(prefix)" \
> "exec_prefix=$(exec_prefix)" \
> @@ -371,10 +358,9 @@ FLAGS_TO_PASS = \
> "RUNTESTFLAGS=$(RUNTESTFLAGS)"
>
> # All generated files which can be included by another file.
> -generated_files = config.h $(GNULIB_H)
> +generated_files = config.h
>
> all: gdbserver$(EXEEXT) gdbreplay$(EXEEXT) $(extra_libraries)
> - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)"
> subdir_do
>
> # Traditionally "install" depends on "all". But it may be useful # not to; for
> example, if the user has made some trivial change to a @@ -393,10 +379,6
> @@ install-only:
> fi; \
> $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
> $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM)
> gdbserver$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
> - # Note that we run install and not install-only, as the latter
> - # is not part of GNU standards and in particular not provided
> - # in libiberty.
> - @$(MAKE) $(FLAGS_TO_PASS) DO=install "DODIRS=$(SUBDIRS)"
> subdir_do
>
> install-strip:
> $(MAKE) $(FLAGS_TO_PASS)
> INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ @@ -408,7 +390,6
> @@ uninstall: force
> n=`echo gdbserver | sed '$(program_transform_name)'`; \
> if [ x$$n = x ]; then n=gdbserver; else true; fi; \
> rm -f $(DESTDIR)/$(bindir)/$$n$(EXEEXT)
> $(DESTDIR)$(man1dir)/$$n.1
> - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)"
> subdir_do
>
> installcheck:
> check:
> @@ -417,8 +398,7 @@ install-info:
> install-pdf:
> html:
> install-html:
> -clean-info: force
> - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)"
> subdir_do
> +clean-info:
>
> gdbserver$(EXEEXT): $(sort $(OBS)) ${CDEPS} $(LIBGNU) $(LIBIBERTY)
> $(SILENCE) rm -f gdbserver$(EXEEXT)
> @@ -426,11 +406,6 @@ gdbserver$(EXEEXT): $(sort $(OBS)) ${CDEPS}
> $(LIBGNU) $(LIBIBERTY)
> -o gdbserver$(EXEEXT) $(OBS) $(LIBGNU) $(LIBIBERTY) \
> $(GDBSERVER_LIBS) $(XM_CLIBS)
>
> -$(LIBGNU) $(LIBIBERTY) $(GNULIB_H): all-lib
> -all-lib: $(GNULIB_BUILDDIR)/Makefile $(LIBIBERTY_BUILDDIR)/Makefile
> - @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS="$(SUBDIRS)"
> subdir_do
> -.PHONY: all-lib
> -
> gdbreplay$(EXEEXT): $(sort $(GDBREPLAY_OBS)) $(LIBGNU) $(LIBIBERTY)
> $(SILENCE) rm -f gdbreplay$(EXEEXT)
> $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_CFLAGS)
> $(INTERNAL_LDFLAGS) \ @@ -488,33 +463,14 @@ clean:
> rm -f $$i/*.o; \
> rm -f $$i/$(DEPDIR)/*; \
> done
> - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)"
> subdir_do
>
> maintainer-clean realclean distclean: clean
> - @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)"
> subdir_do
> - rm -rf $(GNULIB_BUILDDIR)
> rm -f Makefile config.status config.h stamp-h config.log
> rm -f Makefile
> for i in $(CONFIG_SRC_SUBDIR); do \
> rmdir $$i/$(DEPDIR); \
> done
>
> -subdir_do: force
> - @for i in $(DODIRS); do \
> - case $$i in \
> - $(REQUIRED_SUBDIRS)) \
> - if [ ! -f ./$$i/Makefile ] ; then \
> - echo "Missing $$i/Makefile" >&2 ; \
> - exit 1 ; \
> - fi ;; \
> - esac ; \
> - if [ -f ./$$i/Makefile ] ; then \
> - if (cd ./$$i; \
> - $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then
> true ; \
> - else exit 1 ; fi ; \
> - else true ; fi ; \
> - done
> -
> config.h: stamp-h ; @true
> stamp-h: config.in config.status
> $(SHELL) ./config.status config.h
> @@ -522,13 +478,6 @@ stamp-h: config.in config.status
> Makefile: Makefile.in config.status
> $(SHELL) ./config.status $@
>
> -$(GNULIB_BUILDDIR)/Makefile: $(srcdir)/../gnulib/Makefile.in config.status
> - @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
> - CONFIG_COMMANDS="depfiles" \
> - CONFIG_HEADERS= \
> - CONFIG_LINKS= \
> - $(SHELL) config.status
> -
> config.status: configure configure.srv $(srcdir)/../bfd/development.sh
> $(SHELL) ./config.status --recheck
>
> diff --git a/gdbserver/configure b/gdbserver/configure index
> 4b9d7e3718f..eb8aa80c2c5 100755
> --- a/gdbserver/configure
> +++ b/gdbserver/configure
> @@ -6243,223 +6243,6 @@ else
> CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
> fi
>
>
> -gnulib_extra_configure_args=
> -# If large-file support is disabled, make sure gnulib does the same.
> -if test "$enable_largefile" = no; then
> -gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-
> largefile"
> -fi
> -
> -# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect -#
> to find the the source subdir to be configured directly under -# gdbserver/.
> We need to build gnulib under some other directory not -# "gnulib", to avoid
> the problem of both GDB and GDBserver wanting to -# build it in the same
> directory, when building in the source dir.
> -
> - in_src="../gnulib"
> - in_build="build-gnulib-gdbserver"
> - in_extra_args="$gnulib_extra_configure_args"
> -
> - # Remove --cache-file, --srcdir, and --disable-option-checking arguments
> - # so they do not pile up.
> - ac_sub_configure_args=
> - ac_prev=
> - eval "set x $ac_configure_args"
> - shift
> - for ac_arg
> - do
> - if test -n "$ac_prev"; then
> - ac_prev=
> - continue
> - fi
> - case $ac_arg in
> - -cache-file | --cache-file | --cache-fil | --cache-fi \
> - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
> - ac_prev=cache_file ;;
> - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
> - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
> - | --c=*)
> - ;;
> - --config-cache | -C)
> - ;;
> - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
> - ac_prev=srcdir ;;
> - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
> - ;;
> - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
> - ac_prev=prefix ;;
> - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
> - ;;
> - --disable-option-checking)
> - ;;
> - *)
> - case $ac_arg in
> - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
> - esac
> - as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
> - esac
> - done
> -
> - # Always prepend --prefix to ensure using the same prefix
> - # in subdir configurations.
> - ac_arg="--prefix=$prefix"
> - case $ac_arg in
> - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
> - esac
> - ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
> -
> - # Pass --silent
> - if test "$silent" = yes; then
> - ac_sub_configure_args="--silent $ac_sub_configure_args"
> - fi
> -
> - # Always prepend --disable-option-checking to silence warnings, since
> - # different subdirs can have different --enable and --with options.
> - ac_sub_configure_args="--disable-option-checking
> $ac_sub_configure_args"
> -
> - ac_popdir=`pwd`
> - ac_dir=$in_build
> -
> - ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
> - $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
> - $as_echo "$ac_msg" >&6
> - as_dir="$ac_dir"; as_fn_mkdir_p
> -
> - case $srcdir in
> - [\\/]* | ?:[\\/]* )
> - ac_srcdir=$srcdir/$in_src ;;
> - *) # Relative name.
> - ac_srcdir=../$srcdir/$in_src ;;
> - esac
> -
> - cd "$ac_dir"
> -
> - ac_sub_configure=$ac_srcdir/configure
> -
> - # Make the cache file name correct relative to the subdirectory.
> - case $cache_file in
> - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
> - *) # Relative name.
> - ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
> - esac
> -
> - if test -n "$in_extra_args"; then
> - # Add the extra args at the end.
> - ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
> - fi
> -
> - { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL
> $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file
> --srcdir=$ac_srcdir" >&5 -$as_echo "$as_me: running $SHELL
> $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file
> --srcdir=$ac_srcdir" >&6;}
> - # The eval makes quoting arguments work.
> - eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
> - --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
> - as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
> -
> - cd "$ac_popdir"
> -
> -
> -
> - in_src="../libiberty"
> - in_build="build-libiberty-gdbserver"
> - in_extra_args=
> -
> - # Remove --cache-file, --srcdir, and --disable-option-checking arguments
> - # so they do not pile up.
> - ac_sub_configure_args=
> - ac_prev=
> - eval "set x $ac_configure_args"
> - shift
> - for ac_arg
> - do
> - if test -n "$ac_prev"; then
> - ac_prev=
> - continue
> - fi
> - case $ac_arg in
> - -cache-file | --cache-file | --cache-fil | --cache-fi \
> - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
> - ac_prev=cache_file ;;
> - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
> - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
> - | --c=*)
> - ;;
> - --config-cache | -C)
> - ;;
> - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
> - ac_prev=srcdir ;;
> - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
> - ;;
> - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
> - ac_prev=prefix ;;
> - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
> - ;;
> - --disable-option-checking)
> - ;;
> - *)
> - case $ac_arg in
> - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
> - esac
> - as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
> - esac
> - done
> -
> - # Always prepend --prefix to ensure using the same prefix
> - # in subdir configurations.
> - ac_arg="--prefix=$prefix"
> - case $ac_arg in
> - *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
> - esac
> - ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
> -
> - # Pass --silent
> - if test "$silent" = yes; then
> - ac_sub_configure_args="--silent $ac_sub_configure_args"
> - fi
> -
> - # Always prepend --disable-option-checking to silence warnings, since
> - # different subdirs can have different --enable and --with options.
> - ac_sub_configure_args="--disable-option-checking
> $ac_sub_configure_args"
> -
> - ac_popdir=`pwd`
> - ac_dir=$in_build
> -
> - ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
> - $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
> - $as_echo "$ac_msg" >&6
> - as_dir="$ac_dir"; as_fn_mkdir_p
> -
> - case $srcdir in
> - [\\/]* | ?:[\\/]* )
> - ac_srcdir=$srcdir/$in_src ;;
> - *) # Relative name.
> - ac_srcdir=../$srcdir/$in_src ;;
> - esac
> -
> - cd "$ac_dir"
> -
> - ac_sub_configure=$ac_srcdir/configure
> -
> - # Make the cache file name correct relative to the subdirectory.
> - case $cache_file in
> - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
> - *) # Relative name.
> - ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
> - esac
> -
> - if test -n "$in_extra_args"; then
> - # Add the extra args at the end.
> - ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
> - fi
> -
> - { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL
> $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file
> --srcdir=$ac_srcdir" >&5 -$as_echo "$as_me: running $SHELL
> $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file
> --srcdir=$ac_srcdir" >&6;}
> - # The eval makes quoting arguments work.
> - eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
> - --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
> - as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
> -
> - cd "$ac_popdir"
> -
> -
> for ac_header in termios.h sys/reg.h string.h sys/procfs.h
> linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h
> netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h
> do :
> as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` @@ -
> 10838,7 +10621,7 @@ fi
>
>
>
> -GNULIB=build-gnulib-gdbserver/import
> +GNULIB=../gnulib/import
>
> GNULIB_STDINT_H=
> if test x"$STDINT_H" != x; then
> diff --git a/gdbserver/configure.ac b/gdbserver/configure.ac index
> 285a297a1c6..cbd12ea2ed0 100644
> --- a/gdbserver/configure.ac
> +++ b/gdbserver/configure.ac
> @@ -69,22 +69,6 @@ AC_CONFIG_COMMANDS([gdbdepdir],[
>
> ZW_PROG_COMPILER_DEPENDENCIES([CC])
>
> -gnulib_extra_configure_args=
> -# If large-file support is disabled, make sure gnulib does the same.
> -if test "$enable_largefile" = no; then
> -gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-
> largefile"
> -fi
> -
> -# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect -#
> to find the the source subdir to be configured directly under -# gdbserver/.
> We need to build gnulib under some other directory not -# "gnulib", to avoid
> the problem of both GDB and GDBserver wanting to -# build it in the same
> directory, when building in the source dir.
> -ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"],
> - ["$gnulib_extra_configure_args"])
> -
> -ACX_CONFIGURE_DIR(["../libiberty"], ["build-libiberty-gdbserver"])
> -
> AC_CHECK_HEADERS(termios.h sys/reg.h string.h dnl
> sys/procfs.h linux/elf.h dnl
> fcntl.h signal.h sys/file.h dnl
> @@ -432,7 +416,7 @@ AC_SUBST(srv_xmlfiles)
> AC_SUBST(IPA_DEPFILES)
> AC_SUBST(extra_libraries)
>
> -GNULIB=build-gnulib-gdbserver/import
> +GNULIB=../gnulib/import
>
> GNULIB_STDINT_H=
> if test x"$STDINT_H" != x; then
> diff --git a/gdbsupport/common-defs.h b/gdbsupport/common-defs.h index
> 027bf099c1a..a5c57de2f27 100644
> --- a/gdbsupport/common-defs.h
> +++ b/gdbsupport/common-defs.h
> @@ -22,7 +22,7 @@
>
> #ifdef GDBSERVER
>
> -#include <build-gnulib-gdbserver/config.h>
> +#include <gnulib/config.h>
>
> #undef PACKAGE_NAME
> #undef PACKAGE
> --
> 2.17.2
More information about the Gdb-patches
mailing list