[PATCH v4 2/3] DWARFv5: Handle location list for split dwarf.

[nitachra]

GDB throws the error '<error reading variable: dwarf2_find_location_
expression: Corrupted DWARF expression.>' while printing the variable
value with executable file compiled with -gdwarf-5 and -gdwarf-split
flags. This is because DW_LLE_start* or DW_LLE_offset_pair with
DW_LLE_base_addressx are being emitted in DWARFv5 location list instead of
DW_LLE_GNU*. This patch fixes this error.

Tested by running the testsuite before and after the patch and there is no
increase in the number of test cases that fails. Tested with both -gdwarf-4
and -gdwarf-5 flags. Also tested -gslit-dwarf along with -gdwarf-4 as well as
-gdwarf-5 flags. Used clang version 10.0.0. This is the test case used-

void bar(int arr[], int l, int m, int r) {
    int i, j, k, n1= m - l + 1, n2= r - m, L[n1], R[n2];
    for (i = 0; i < n1; i++)
        L[i] = arr[l + i];
    for (j = 0; j < n2; j++)
        R[j] = arr[m + 1+ j];
}

int main()
{
    int arr[] = {12, 11};
    bar(arr,0,1,2);
    return 0;
}

clang -gdwarf-5 -gsplit-dwarf test.c -o test.out

gdb test.out
gdb> start
gdb> step
gdb> step
gdb> step
gdb> step
gdb> p L[0]
dwarf2_find_location_expression: Corrupted DWARF expression.

gdb/ChangeLog:
2020-04-07  Nitika Achra  <Nitika.Achra@amd.com>

	* dwarf2/loc.c (enum debug_loc_kind): Add a new kind DEBUG_LOC_OFFSET_PAIR.
	(dwarf2_find_location_expression): Call the function decode_debug_loclists_
	addresses if DWARF version is 5 or more. DW_LLE_start* or DW_LLE_offset_pair
	with DW_LLE_base_addressx are being emitted in DWARFv5 instead of DW_LLE_GNU*.
	Add applicable base address if the entry is DW_LLE_offset_pair from DWO.
	(decode_debug_loclists_addresses): Return DEBUG_LOC_OFFSET_PAIR instead of
	DEBUG_LOC_START_END in case of DW_LLE_offset_pair.
---
 gdb/ChangeLog    | 11 +++++++++++
 gdb/dwarf2/loc.c | 18 +++++++++++++-----
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 4f2815524e..5f385452ed 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,14 @@
+2020-04-07  Nitika Achra  <Nitika.Achra@amd.com>
+
+	* dwarf2/loc.c (enum debug_loc_kind): Add a new kind DEBUG_LOC_OFFSET_PAIR.
+	(dwarf2_find_location_expression): Call the function decode_debug_loclists_
+	addresses if DWARF version is 5 or more. DW_LLE_start* or DW_LLE_offset_pair
+	with DW_LLE_base_addressx are being emitted in DWARFv5 instead of DW_LLE_GNU*.
+	Add applicable base address if the entry is DW_LLE_offset_pair from DWO.
+	(decode_debug_loclists_addresses): Return DEBUG_LOC_OFFSET_PAIR instead of
+	DEBUG_LOC_START_END in case of DW_LLE_offset_pair.
+
+
 2020-04-07  Nitika Achra  <Nitika.Achra@amd.com>
 
 	* dwarf2/read.c (cu_debug_loc_section): Added the declaration for the function.
diff --git a/gdb/dwarf2/loc.c b/gdb/dwarf2/loc.c
index fc54e16ffd..ecd83ec4b9 100644
--- a/gdb/dwarf2/loc.c
+++ b/gdb/dwarf2/loc.c
@@ -92,6 +92,11 @@ enum debug_loc_kind
      as in .debug_loc.  */
   DEBUG_LOC_START_LENGTH = 3,
 
+  /* This is followed by two unsigned LEB128 operands. The values of these
+     operands are the starting and ending offsets, respectively, relative to
+     the applicable base address.  */
+  DEBUG_LOC_OFFSET_PAIR = 4,
+
   /* An internal value indicating there is insufficient data.  */
   DEBUG_LOC_BUFFER_OVERFLOW = -1,
 
@@ -232,7 +237,7 @@ decode_debug_loclists_addresses (struct dwarf2_per_cu_data *per_cu,
 	return DEBUG_LOC_BUFFER_OVERFLOW;
       *high = u64;
       *new_ptr = loc_ptr;
-      return DEBUG_LOC_START_END;
+      return DEBUG_LOC_OFFSET_PAIR;
     /* Following cases are not supported yet.  */
     case DW_LLE_startx_endx:
     case DW_LLE_start_end:
@@ -332,7 +337,7 @@ dwarf2_find_location_expression (struct dwarf2_loclist_baton *baton,
       enum debug_loc_kind kind;
       const gdb_byte *new_ptr = NULL; /* init for gcc -Wall */
 
-      if (baton->from_dwo)
+      if (baton->per_cu->version () < 5 && baton->from_dwo)
 	kind = decode_debug_loc_dwo_addresses (baton->per_cu,
 					       loc_ptr, buf_end, &new_ptr,
 					       &low, &high, byte_order);
@@ -358,6 +363,7 @@ dwarf2_find_location_expression (struct dwarf2_loclist_baton *baton,
 	  continue;
 	case DEBUG_LOC_START_END:
 	case DEBUG_LOC_START_LENGTH:
+	case DEBUG_LOC_OFFSET_PAIR:
 	  break;
 	case DEBUG_LOC_BUFFER_OVERFLOW:
 	case DEBUG_LOC_INVALID_ENTRY:
@@ -369,9 +375,11 @@ dwarf2_find_location_expression (struct dwarf2_loclist_baton *baton,
 
       /* Otherwise, a location expression entry.
 	 If the entry is from a DWO, don't add base address: the entry is from
-	 .debug_addr which already has the DWARF "base address".  We still add
-	 base_offset in case we're debugging a PIE executable.  */
-      if (baton->from_dwo)
+	 .debug_addr which already has the DWARF "base address". We still add
+	 base_offset in case we're debugging a PIE executable. However, if the
+	 entry is DW_LLE_offset_pair from a DWO, add the base address as the
+	 operands are offsets relative to the applicable base address.  */
+      if (baton->from_dwo && kind != DEBUG_LOC_OFFSET_PAIR)
 	{
 	  low += base_offset;
 	  high += base_offset;
-- 
2.17.1