[PATCH v5 0/6] sim port for OpenRISC
Stafford Horne
shorne@gmail.com
Thu Oct 5 13:49:00 GMT 2017
Hello,
(what I thought would be a few days turned into a month since the comments
on v4)
Please find attached the sim patches that allow to get a basic OpenRISC
system running. This was used to verify the OpenRISC gdb port.
The main author is Peter Gavin who should have his FSF copyright in place.
Request for comments on:
- The testcase has a few tests commented out. I do not plan to fix now,
but hopefully be addressed after upstreaming.
# Guide to Code #
As Simon has requested I have tried to comment on the functions in the
simulator implementation. But I want to provide some general architecture
comments here for reference. Please let me know if there is a better place
for these kind of docs.
The or1k sim uses the CGEN system to generate most of the simulator code.
There is some documentation for CGEN on sourceware.org here:
https://sourceware.org/cgen/docs/cgen.html
In the binutils-gdb project there are several files which get combined to
make up the CGEN simulator. The process for how those are built can be
seen in `or1k/Makefile.in`. But the main files are:
MAIN
sim/common/nrun.c - the main() calls sim_open(), sim_resume() and others
sim/or1k/sim-if.c - implements sim_open() and others used by nrun
when envoking sim in gdb, gdb uses sim_open() directly
CGEN input and generated files
cpu/or1k*.cpu - these define the hardware, model and semantics
sim/or1k/arch.c - generated defines sim_machs array
sim/or1k/cpu.c - *generated defines register setters and getters
sim/or1k/decode.c - generated defines instruction decoder
sim/or1k/model.c - generated defines instruction cycles
sim/or1k/sem.c - *generated defines instruction operation semantics
sim/or1k/sem-switch.c - *generated ditto but as a switch
ENGINE runs decode execute loop
sim/common/cgen-* - cgen implementation helpers
sim/common/cgen-run.c - implements sim_resume() which runs the engine
sim/common/genmloop.sh - helper script to generate mloop.c engine the
decode, execute loop
sim/or1k/mloop.in - openRISC implementation of mloop parts
EXTRAS callbacks from sem* to c code
sim/or1k/or1k.c - implements some instructions in c (not cgen schema)
sim/or1k/traps.c - exception handler
For each sim architecture we have choices for how the mloop is implemented.
The OpenRISC engine uses scache pbb (pseudo-basic-block) instruction
extraction with both fast (sem-switch.c based) and full (sem.c based)
implementations. The fast and full modes are switch via the command line
options to the `run` command, i.e. --trace-insn will run in full mode.
# Building #
Simon asked for some details on how we build and test the openrisc sim.
Here are some details:
## TOOLCHAIN ##
This may not be needed as binutils contains most/all of the utilities
required. But if needed, get this toolchain (this is the newlib binary,
others also available)
https://github.com/openrisc/or1k-gcc/releases/download/or1k-5.4.0-20170218/or1k-elf-5.4.0-20170218.tar.xz
If you want to build that from scratch look to:
https://github.com/openrisc/newlib/blob/scripts/build.sh
## GDB ##
In a directory along side binutils-gdb source
mkdir build-or1k-elf-gdb
cd build-or1k-elf-gdb
../binutils-gdb/configure --target=or1k-elf \
--prefix=/opt/shorne/software/or1k \
--disable-itcl \
--disable-tk \
--disable-tcl \
--disable-winsup \
--disable-gdbtk \
--disable-libgui \
--disable-rda \
--disable-sid \
--with-sysroot \
--disable-newlib \
--disable-libgloss \
--disable-gas \
--disable-ld \
--disable-binutils \
--disable-gprof \
--with-system-zlib
# make gdb, sim
make
# test sim
cd sim
make check
The sim creates a binary simulator too, you can run binaries such as hello
world with:
or1k-elf-gcc hello.c
./or1k/run --trace-insn ./a.out
# Test Results #
Sim dejagnu tests were added specifically for openrisc and used to test
this. Please see the details of running the testsuite for sim below:
=== sim Summary ===
# of expected passes 18
/home/shorne/work/openrisc/build-gdb/sim/or1k/run 0.5
Thanks,
-Stafford
Changes since v4
* Added comments to most of the functions
* Implemented remainder fpu function
* Actually wire in fpu and error handling logic
* Added fpu test case
Changes since v3
* Cleaned up indentation and style of sim testsuite
* Cleaned up TODOs in testsuite
* Implemented range exception
Changes since v2
* Removed 64-bit implementation (reduced files)
* Removed cgen suffix patch
* Removed different builds for linux
* Removed unused macros
* Fixed gnu style issues pointed out by Mike
* Fixed copyrights (not Cygnus, added to each file)
Changes since v1
* Squashed sim patches into single sim patch
* Put Generated files in separate patch
* I have my sim/gdb copyright assignment complete
Peter Gavin (3):
sim: cgen: add remainder functions (needed for OR1K lf.rem.[sd])
sim: cgen: add MUL2OFSI and MUL1OFSI macros (needed for OR1K l.mul[u])
sim: testsuite: add testsuite for or1k sim
Stafford Horne (3):
sim: or1k: add or1k target to sim
sim: or1k: add cgen generated files
sim: or1k: add autoconf generated files
sim/common/cgen-accfp.c | 40 +
sim/common/cgen-fpu.h | 4 +
sim/common/cgen-ops.h | 18 +
sim/common/sim-fpu.c | 90 +-
sim/common/sim-fpu.h | 13 +-
sim/configure | 9 +
sim/configure.tgt | 4 +
sim/or1k/Makefile.in | 147 +
sim/or1k/aclocal.m4 | 119 +
sim/or1k/arch.c | 38 +
sim/or1k/arch.h | 50 +
sim/or1k/config.in | 248 +
sim/or1k/configure | 16043 +++++++++++++++++++++++
sim/or1k/configure.ac | 17 +
sim/or1k/cpu.c | 10181 ++++++++++++++
sim/or1k/cpu.h | 5024 +++++++
sim/or1k/cpuall.h | 66 +
sim/or1k/decode.c | 2559 ++++
sim/or1k/decode.h | 94 +
sim/or1k/mloop.in | 242 +
sim/or1k/model.c | 3809 ++++++
sim/or1k/or1k-sim.h | 95 +
sim/or1k/or1k.c | 355 +
sim/or1k/sem-switch.c | 2748 ++++
sim/or1k/sem.c | 2953 +++++
sim/or1k/sim-if.c | 281 +
sim/or1k/sim-main.h | 81 +
sim/or1k/traps.c | 299 +
sim/testsuite/configure | 4 +
sim/testsuite/sim/or1k/add.S | 606 +
sim/testsuite/sim/or1k/alltests.exp | 34 +
sim/testsuite/sim/or1k/and.S | 198 +
sim/testsuite/sim/or1k/basic.S | 522 +
sim/testsuite/sim/or1k/div.S | 290 +
sim/testsuite/sim/or1k/ext.S | 236 +
sim/testsuite/sim/or1k/find.S | 100 +
sim/testsuite/sim/or1k/flag.S | 378 +
sim/testsuite/sim/or1k/fpu.S | 128 +
sim/testsuite/sim/or1k/jump.S | 104 +
sim/testsuite/sim/or1k/load.S | 358 +
sim/testsuite/sim/or1k/mac.S | 778 ++
sim/testsuite/sim/or1k/mfspr.S | 171 +
sim/testsuite/sim/or1k/mul.S | 573 +
sim/testsuite/sim/or1k/or.S | 199 +
sim/testsuite/sim/or1k/or1k-asm-test-env.h | 59 +
sim/testsuite/sim/or1k/or1k-asm-test-helpers.h | 121 +
sim/testsuite/sim/or1k/or1k-asm-test.h | 225 +
sim/testsuite/sim/or1k/or1k-asm.h | 37 +
sim/testsuite/sim/or1k/or1k-test.ld | 75 +
sim/testsuite/sim/or1k/ror.S | 159 +
sim/testsuite/sim/or1k/shift.S | 541 +
sim/testsuite/sim/or1k/spr-defs.h | 120 +
sim/testsuite/sim/or1k/sub.S | 201 +
sim/testsuite/sim/or1k/xor.S | 200 +
54 files changed, 52037 insertions(+), 7 deletions(-)
create mode 100644 sim/or1k/Makefile.in
create mode 100644 sim/or1k/aclocal.m4
create mode 100644 sim/or1k/arch.c
create mode 100644 sim/or1k/arch.h
create mode 100644 sim/or1k/config.in
create mode 100755 sim/or1k/configure
create mode 100644 sim/or1k/configure.ac
create mode 100644 sim/or1k/cpu.c
create mode 100644 sim/or1k/cpu.h
create mode 100644 sim/or1k/cpuall.h
create mode 100644 sim/or1k/decode.c
create mode 100644 sim/or1k/decode.h
create mode 100644 sim/or1k/mloop.in
create mode 100644 sim/or1k/model.c
create mode 100644 sim/or1k/or1k-sim.h
create mode 100644 sim/or1k/or1k.c
create mode 100644 sim/or1k/sem-switch.c
create mode 100644 sim/or1k/sem.c
create mode 100644 sim/or1k/sim-if.c
create mode 100644 sim/or1k/sim-main.h
create mode 100644 sim/or1k/traps.c
create mode 100644 sim/testsuite/sim/or1k/add.S
create mode 100644 sim/testsuite/sim/or1k/alltests.exp
create mode 100644 sim/testsuite/sim/or1k/and.S
create mode 100644 sim/testsuite/sim/or1k/basic.S
create mode 100644 sim/testsuite/sim/or1k/div.S
create mode 100644 sim/testsuite/sim/or1k/ext.S
create mode 100644 sim/testsuite/sim/or1k/find.S
create mode 100644 sim/testsuite/sim/or1k/flag.S
create mode 100644 sim/testsuite/sim/or1k/fpu.S
create mode 100644 sim/testsuite/sim/or1k/jump.S
create mode 100644 sim/testsuite/sim/or1k/load.S
create mode 100644 sim/testsuite/sim/or1k/mac.S
create mode 100644 sim/testsuite/sim/or1k/mfspr.S
create mode 100644 sim/testsuite/sim/or1k/mul.S
create mode 100644 sim/testsuite/sim/or1k/or.S
create mode 100644 sim/testsuite/sim/or1k/or1k-asm-test-env.h
create mode 100644 sim/testsuite/sim/or1k/or1k-asm-test-helpers.h
create mode 100644 sim/testsuite/sim/or1k/or1k-asm-test.h
create mode 100644 sim/testsuite/sim/or1k/or1k-asm.h
create mode 100644 sim/testsuite/sim/or1k/or1k-test.ld
create mode 100644 sim/testsuite/sim/or1k/ror.S
create mode 100644 sim/testsuite/sim/or1k/shift.S
create mode 100644 sim/testsuite/sim/or1k/spr-defs.h
create mode 100644 sim/testsuite/sim/or1k/sub.S
create mode 100644 sim/testsuite/sim/or1k/xor.S
--
2.13.5
More information about the Gdb-patches
mailing list