[PATCH v3 00/15] CTF Support
Yao Qi
yao@codesourcery.com
Wed Apr 10 19:16:00 GMT 2013
On 03/09/2013 11:47 AM, Yao Qi wrote:
> This patch series is about supporting writing GDB trace data to
> Common Trace Format (CTF) and read CTF file in a new target 'ctf'.
>
> Patch 1/15 ~ 5/15 are from V2, with all Pedro and Tom's comments
> addressed, but also make use of advanced CTF event type "sequences"
> which simplifies the design a little bit.
> The rest of the patches are new added to write trace
> status (by patch 6/15), uploaded tsv (by patch 11/15) and uploaded
> tracepoints (by patch 12/15) to CTF. So this patch series is a
> complete support to CTF, "complete" here means that the information
> saved in tfile is the same the information saved in ctf, no more
> and no less.
>
> Patch 7/15 ~ 9/15, 13/15 are not related to CTF. They are about
> writing some fields of trace status into tfile, and test the "tstatus"
> output and tracepoint actions in tfile target. They can be posted
> separately but looks more meaningful in this context.
>
> Note that this series don't include these patches:
>
> [PATCH 0/5] Look for the last matched V block in trace frame
> http://sourceware.org/ml/gdb-patches/2013-03/msg00252.html
>
> which are regarded as a bug fix to all three targets (live, tfile,
> ctf) on looking for V block in traceframe.
>
> This series is regression tested with {native, gdbserver} x w/
> babeltrace on x86 Fedora 16 and {native, gdbserver} x /wo
> babeltrace on x86_64 Lucid.
>
Patches 03 ~ 06, 10 ~ 12, 14 are approved and they are committed as a
whole, shown below. Now, the whole CTF stuff (except the patch to
MAINTAINER) goes into trunk. Thanks everyone who reviewed this series.
--
Yao (é½å°§)
gdb:
2013-04-10 Hui Zhu <hui@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* configure.ac: Check libbabeltrace is installed.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in (LIBBABELTRACE): New.
(CLIBS): Add LIBBABELTRACE.
* ctf.c: Include "exec.h".
(CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
(CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
(ctf_save_metadata_header): Define new type aliases in
metadata.
(ctf_write_header): Define event type "tsv_def" and "tp_def"
in metadata. Start a new faked packet for trace status.
(ctf_write_status): Write trace status to CTF.
(ctf_write_uploaded_tsv): Write TSV to CTF.
(ctf_write_uploaded_tp): Write tracepoint definition to CTF.
(ctf_write_definition_end): End the faked packet.
(ctx, ctf_iter, trace_dirname): New.
(start_pos): New variable.
(ctf_destroy, ctf_open_dir, ctf_open): New.
(SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
macros.
(ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
(ctf_fetch_registers, ctf_xfer_partial): New.
(ctf_get_trace_state_variable_value): New.
(ctf_get_tpnum_from_frame_event): New.
(ctf_get_traceframe_address): New.
(ctf_trace_find, ctf_has_stack): New.
(ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
(ctf_get_trace_status, ctf_read_status): New.
(_initialize_ctf): New.
* tracepoint.c (get_tracepoint_number): New
(get_uploaded_tsv): Remove 'static'.
(struct traceframe_info, trace_regblock_size): Move it to ...
* tracepoint.h: ... here.
(get_tracepoint_number): Declare it.
(get_uploaded_tsv): Declare it.
* NEWS: Mention new configure option.
gdb/doc:
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Trace Files): Add "target ctf".
gdb/testsuite:
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/actions.exp: Save trace data to CTF.
Change to ctf target if GDB supports, read CTF data in ctf
target, and check the actions of tracepoints.
* gdb.trace/while-stepping.exp: Likewise.
* gdb.trace/report.exp: Test GDB saves trace data to CTF
format and read CTF trace file if GDB supports.
* gdb.trace/tstatus.exp: Save trace data to CTF. If ctf
target is supported, change to ctf target, read trace data and
check output of command "tstatus".
* gdb.trace/tsv.exp: Save trace frame to CTF. If GDB supports,
read CTF data by target ctf and call check_tsv.
---
gdb/Makefile.in | 6 +-
gdb/NEWS | 3 +
gdb/config.in | 3 +
gdb/configure | 517 ++++++++++++
gdb/configure.ac | 41 +
gdb/ctf.c | 1196 +++++++++++++++++++++++++++-
gdb/doc/gdb.texinfo | 32 +-
gdb/testsuite/gdb.trace/actions.exp | 24 +
gdb/testsuite/gdb.trace/report.exp | 14 +
gdb/testsuite/gdb.trace/tstatus.exp | 14 +
gdb/testsuite/gdb.trace/tsv.exp | 13 +
gdb/testsuite/gdb.trace/while-stepping.exp | 24 +
gdb/tracepoint.c | 18 +-
gdb/tracepoint.h | 15 +
14 files changed, 1892 insertions(+), 28 deletions(-)
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 498d42a..0814bcb 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -154,6 +154,10 @@ LIBEXPAT = @LIBEXPAT@
# Where is lzma? This will be empty if lzma was not available.
LIBLZMA = @LIBLZMA@
+# Where is libbabeltrace? This will be empty if lbabeltrace was not
+# available.
+LIBBABELTRACE = @LIBBABELTRACE@
+
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
@@ -475,7 +479,7 @@ INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_
# LIBIBERTY appears twice on purpose.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
- $(LIBEXPAT) $(LIBLZMA) \
+ $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \
$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
diff --git a/gdb/NEWS b/gdb/NEWS
index 6f202e2..86716e0 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -135,6 +135,9 @@ Tilera TILE-Gx GNU/Linux tilegx*-*-linux
Release versions, on the other hand, are built without -lmcheck
by default. The --enable-libmcheck/--disable-libmcheck configure
options allow the user to override that default.
+--with-babeltrace/--with-babeltrace-include/--with-babeltrace-lib
+ This configure option allows the user to build GDB with
+ libbabeltrace using which GDB can read Common Trace Format data.
* New commands (for set/show, see "New options" below)
diff --git a/gdb/config.in b/gdb/config.in
index 9e21325..c4e8eaa 100644
--- a/gdb/config.in
+++ b/gdb/config.in
@@ -180,6 +180,9 @@
/* Define if your <locale.h> file defines LC_MESSAGES. */
#undef HAVE_LC_MESSAGES
+/* Define if libbabeltrace is available */
+#undef HAVE_LIBBABELTRACE
+
/* Define to 1 if you have the `dl' library (-ldl). */
#undef HAVE_LIBDL
diff --git a/gdb/configure b/gdb/configure
index 0dd67f0..6588c72 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -592,6 +592,9 @@ enable_option_checking=no
ac_subst_vars='LTLIBOBJS
LIBOBJS
GDB_NM_FILE
+LTLIBBABELTRACE
+LIBBABELTRACE
+HAVE_LIBBABELTRACE
frags
target_subdir
CONFIG_UNINSTALL
@@ -819,6 +822,8 @@ with_x
enable_sim
enable_multi_ice
enable_gdbserver
+with_babeltrace
+with_libbabeltrace_prefix
'
ac_precious_vars='build_alias
host_alias
@@ -1532,6 +1537,9 @@ Optional Packages:
--with-tcl directory containing tcl configuration (tclConfig.sh)
--with-tk directory containing tk configuration (tkConfig.sh)
--with-x use the X Window System
+ --with-babeltrace include babeltrace support (auto/yes/no)
+ --with-libbabeltrace-prefix[=DIR] search for libbabeltrace in DIR/include and DIR/lib
+ --without-libbabeltrace-prefix don't search for libbabeltrace in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -14093,6 +14101,515 @@ if test "$enable_gdbserver" = "yes" -a "$gdbserver_build_enabled" != "yes"; then
as_fn_error "Automatic gdbserver build is not supported for this configuration" "$LINENO" 5
fi
+# Check for babeltrace and babeltrace-ctf
+
+# Check whether --with-babeltrace was given.
+if test "${with_babeltrace+set}" = set; then :
+ withval=$with_babeltrace;
+else
+ with_babeltrace=auto
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use babeltrace" >&5
+$as_echo_n "checking whether to use babeltrace... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_babeltrace" >&5
+$as_echo "$with_babeltrace" >&6; }
+
+if test "x$with_babeltrace" = "xno"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: babletrace support disabled; GDB is unable to read CTF data." >&5
+$as_echo "$as_me: WARNING: babletrace support disabled; GDB is unable to read CTF data." >&2;}
+else
+ # Append -Werror to CFLAGS so that configure can catch the warning
+ # "assignment from incompatible pointer type", which is related to
+ # the babeltrace change from 1.0.3 to 1.1.0. Babeltrace 1.1.0 works
+ # in GDB, while babeltrace 1.0.3 is broken.
+ # AC_LIB_HAVE_LINKFLAGS may modify CPPFLAGS in it, so it should be
+ # safe to save and restore CFLAGS here.
+ saved_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -Werror"
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libbabeltrace-prefix was given.
+if test "${with_libbabeltrace_prefix+set}" = set; then :
+ withval=$with_libbabeltrace_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBBABELTRACE=
+ LTLIBBABELTRACE=
+ INCBABELTRACE=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='babeltrace babeltrace-ctf'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBBABELTRACE; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBBABELTRACE; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$found_so"
+ else
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$found_a"
+ else
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCBABELTRACE; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCBABELTRACE="${INCBABELTRACE}${INCBABELTRACE:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBBABELTRACE; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBBABELTRACE; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$dep"
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-l$name"
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCBABELTRACE; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libbabeltrace" >&5
+$as_echo_n "checking for libbabeltrace... " >&6; }
+if test "${ac_cv_libbabeltrace+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBBABELTRACE"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <babeltrace/babeltrace.h>
+ #include <babeltrace/ctf/events.h>
+ #include <babeltrace/ctf/iterator.h>
+int
+main ()
+{
+struct bt_iter_pos *pos = bt_iter_get_pos (bt_ctf_get_iter (NULL));
+ struct bt_ctf_event *event = NULL;
+ const struct bt_definition *scope;
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_STREAM_EVENT_HEADER);
+ bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libbabeltrace=yes
+else
+ ac_cv_libbabeltrace=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libbabeltrace" >&5
+$as_echo "$ac_cv_libbabeltrace" >&6; }
+ if test "$ac_cv_libbabeltrace" = yes; then
+ HAVE_LIBBABELTRACE=yes
+
+$as_echo "#define HAVE_LIBBABELTRACE 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libbabeltrace" >&5
+$as_echo_n "checking how to link with libbabeltrace... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBBABELTRACE" >&5
+$as_echo "$LIBBABELTRACE" >&6; }
+ else
+ HAVE_LIBBABELTRACE=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBBABELTRACE=
+ LTLIBBABELTRACE=
+ fi
+
+
+
+
+
+
+ CFLAGS=$saved_CFLAGS
+
+ if test "$HAVE_LIBBABELTRACE" != yes; then
+ if test "$with_babeltrace" = yes; then
+ as_fn_error "babeltrace is missing or unusable" "$LINENO" 5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: babeltrace is missing or unusable; GDB is unable to read CTF data." >&5
+$as_echo "$as_me: WARNING: babeltrace is missing or unusable; GDB is unable to read CTF data." >&2;}
+ fi
+ fi
+fi
+
# If nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
# to an empty version.
diff --git a/gdb/configure.ac b/gdb/configure.ac
index c17f587..149ac37 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -2321,6 +2321,47 @@ if test "$enable_gdbserver" = "yes" -a "$gdbserver_build_enabled" != "yes"; then
AC_MSG_ERROR(Automatic gdbserver build is not supported for this configuration)
fi
+# Check for babeltrace and babeltrace-ctf
+AC_ARG_WITH(babeltrace,
+ AC_HELP_STRING([--with-babeltrace], [include babeltrace support (auto/yes/no)]),
+ [], [with_babeltrace=auto])
+AC_MSG_CHECKING([whether to use babeltrace])
+AC_MSG_RESULT([$with_babeltrace])
+
+if test "x$with_babeltrace" = "xno"; then
+ AC_MSG_WARN([babletrace support disabled; GDB is unable to read CTF data.])
+else
+ # Append -Werror to CFLAGS so that configure can catch the warning
+ # "assignment from incompatible pointer type", which is related to
+ # the babeltrace change from 1.0.3 to 1.1.0. Babeltrace 1.1.0 works
+ # in GDB, while babeltrace 1.0.3 is broken.
+ # AC_LIB_HAVE_LINKFLAGS may modify CPPFLAGS in it, so it should be
+ # safe to save and restore CFLAGS here.
+ saved_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -Werror"
+ AC_LIB_HAVE_LINKFLAGS([babeltrace], [babeltrace-ctf],
+ [#include <babeltrace/babeltrace.h>
+ #include <babeltrace/ctf/events.h>
+ #include <babeltrace/ctf/iterator.h>],
+ [struct bt_iter_pos *pos = bt_iter_get_pos (bt_ctf_get_iter (NULL));
+ struct bt_ctf_event *event = NULL;
+ const struct bt_definition *scope;
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_STREAM_EVENT_HEADER);
+ bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
+ ])
+ CFLAGS=$saved_CFLAGS
+
+ if test "$HAVE_LIBBABELTRACE" != yes; then
+ if test "$with_babeltrace" = yes; then
+ AC_MSG_ERROR([babeltrace is missing or unusable])
+ else
+ AC_MSG_WARN([babeltrace is missing or unusable; GDB is unable to read CTF data.])
+ fi
+ fi
+fi
+
# If nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
# to an empty version.
diff --git a/gdb/ctf.c b/gdb/ctf.c
index de54051..0985784 100644
--- a/gdb/ctf.c
+++ b/gdb/ctf.c
@@ -24,6 +24,7 @@
#include "tracepoint.h"
#include "regcache.h"
#include "gdb_stat.h"
+#include "exec.h"
#include <ctype.h>
@@ -34,10 +35,15 @@
1. The length (in bytes) of register cache. Event "register" will
be defined in metadata, which includes the length.
- 2. Trace status. Not implemented yet in CTF writer.
+ 2. Trace status. Event "status" is defined in metadata, which
+ includes all aspects of trace status.
- 3. Uploaded trace variables and tracepoints. Not implemented yet
- in CTF writer.
+ 3. Uploaded trace variables. Event "tsv_def" is defined in
+ metadata, which is about all aspects of a uploaded trace variable.
+ Uploaded tracepoints. Event "tp_def" is defined in meta, which
+ is about all aspects of an uploaded tracepoint. Note that the
+ "sequence" (a CTF type, which is a dynamically-sized array.) is
+ used for "actions" "step_actions" and "cmd_strings".
4. Trace frames. Each trace frame is composed by several blocks
of different types ('R', 'M', 'V'). One trace frame is saved in
@@ -65,6 +71,9 @@
#define CTF_EVENT_ID_TSV 1
#define CTF_EVENT_ID_MEMORY 2
#define CTF_EVENT_ID_FRAME 3
+#define CTF_EVENT_ID_STATUS 4
+#define CTF_EVENT_ID_TSV_DEF 5
+#define CTF_EVENT_ID_TP_DEF 6
/* The state kept while writing the CTF datastream file. */
@@ -119,6 +128,12 @@ ctf_save_write (struct trace_write_handler *handler,
#define ctf_save_write_uint32(HANDLER, U32) \
ctf_save_write (HANDLER, (gdb_byte *) &U32, 4)
+/* Write a signed 32-bit integer to datastream file represented by
+ HANDLER. */
+
+#define ctf_save_write_int32(HANDLER, INT32) \
+ ctf_save_write ((HANDLER), (gdb_byte *) &(INT32), 4)
+
/* Set datastream file position. Update HANDLER->content_size
if WHENCE is SEEK_CUR. */
@@ -217,6 +232,15 @@ ctf_save_metadata_header (struct trace_write_handler *handler)
"typealias integer { size = 64; align = 64;"
"signed = false; base = hex;}"
" := uint64_t;\n");
+ ctf_save_write_metadata (handler,
+ "typealias integer { size = 32; align = 32;"
+ "signed = true; } := int32_t;\n");
+ ctf_save_write_metadata (handler,
+ "typealias integer { size = 64; align = 64;"
+ "signed = true; } := int64_t;\n");
+ ctf_save_write_metadata (handler,
+ "typealias string { encoding = ascii;"
+ " } := chars;\n");
ctf_save_write_metadata (handler, "\n");
/* Get the byte order of the host and write CTF data in this byte
@@ -365,8 +389,50 @@ ctf_write_header (struct trace_file_writer *self)
"\t};\n"
"};\n", CTF_EVENT_ID_FRAME);
+ ctf_save_write_metadata (&writer->tcs, "\n");
+ ctf_save_write_metadata (&writer->tcs,
+ "event {\n\tname = \"tsv_def\";\n"
+ "\tid = %u;\n\tfields := struct { \n"
+ "\t\tint64_t initial_value;\n"
+ "\t\tint32_t number;\n"
+ "\t\tint32_t builtin;\n"
+ "\t\tchars name;\n"
+ "\t};\n"
+ "};\n", CTF_EVENT_ID_TSV_DEF);
+
+ ctf_save_write_metadata (&writer->tcs, "\n");
+ ctf_save_write_metadata (&writer->tcs,
+ "event {\n\tname = \"tp_def\";\n"
+ "\tid = %u;\n\tfields := struct { \n"
+ "\t\tuint64_t addr;\n"
+ "\t\tuint64_t traceframe_usage;\n"
+ "\t\tint32_t number;\n"
+ "\t\tint32_t enabled;\n"
+ "\t\tint32_t step;\n"
+ "\t\tint32_t pass;\n"
+ "\t\tint32_t hit_count;\n"
+ "\t\tint32_t type;\n"
+ "\t\tchars cond;\n"
+
+ "\t\tuint32_t action_num;\n"
+ "\t\tchars actions[action_num];\n"
+
+ "\t\tuint32_t step_action_num;\n"
+ "\t\tchars step_actions[step_action_num];\n"
+
+ "\t\tchars at_string;\n"
+ "\t\tchars cond_string;\n"
+
+ "\t\tuint32_t cmd_num;\n"
+ "\t\tchars cmd_strings[cmd_num];\n"
+ "\t};\n"
+ "};\n", CTF_EVENT_ID_TP_DEF);
+
gdb_assert (writer->tcs.content_size == 0);
gdb_assert (writer->tcs.packet_start == 0);
+
+ /* Create a new packet to contain this event. */
+ self->ops->frame_ops->start (self, 0);
}
/* This is the implementation of trace_file_write_ops method
@@ -397,8 +463,39 @@ static void
ctf_write_status (struct trace_file_writer *self,
struct trace_status *ts)
{
- /* It is not supported yet to write trace status into CTF trace
- data. */
+ struct ctf_trace_file_writer *writer
+ = (struct ctf_trace_file_writer *) self;
+ uint32_t id;
+ int32_t int32;
+
+ ctf_save_write_metadata (&writer->tcs, "\n");
+ ctf_save_write_metadata (&writer->tcs,
+ "event {\n\tname = \"status\";\n\tid = %u;\n"
+ "\tfields := struct { \n"
+ "\t\tint32_t stop_reason;\n"
+ "\t\tint32_t stopping_tracepoint;\n"
+ "\t\tint32_t traceframe_count;\n"
+ "\t\tint32_t traceframes_created;\n"
+ "\t\tint32_t buffer_free;\n"
+ "\t\tint32_t buffer_size;\n"
+ "\t\tint32_t disconnected_tracing;\n"
+ "\t\tint32_t circular_buffer;\n"
+ "\t};\n"
+ "};\n",
+ CTF_EVENT_ID_STATUS);
+
+ id = CTF_EVENT_ID_STATUS;
+ /* Event Id. */
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &id, 4, 4);
+
+ ctf_save_write_int32 (&writer->tcs, ts->stop_reason);
+ ctf_save_write_int32 (&writer->tcs, ts->stopping_tracepoint);
+ ctf_save_write_int32 (&writer->tcs, ts->traceframe_count);
+ ctf_save_write_int32 (&writer->tcs, ts->traceframes_created);
+ ctf_save_write_int32 (&writer->tcs, ts->buffer_free);
+ ctf_save_write_int32 (&writer->tcs, ts->buffer_size);
+ ctf_save_write_int32 (&writer->tcs, ts->disconnected_tracing);
+ ctf_save_write_int32 (&writer->tcs, ts->circular_buffer);
}
/* This is the implementation of trace_file_write_ops method
@@ -408,8 +505,31 @@ static void
ctf_write_uploaded_tsv (struct trace_file_writer *self,
struct uploaded_tsv *tsv)
{
- /* It is not supported yet to write uploaded trace variables
- into CTF trace data. */
+ struct ctf_trace_file_writer *writer
+ = (struct ctf_trace_file_writer *) self;
+ int32_t int32;
+ int64_t int64;
+ unsigned int len;
+ const gdb_byte zero = 0;
+
+ /* Event Id. */
+ int32 = CTF_EVENT_ID_TSV_DEF;
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &int32, 4, 4);
+
+ /* initial_value */
+ int64 = tsv->initial_value;
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
+
+ /* number */
+ ctf_save_write_int32 (&writer->tcs, tsv->number);
+
+ /* builtin */
+ ctf_save_write_int32 (&writer->tcs, tsv->builtin);
+
+ /* name */
+ if (tsv->name != NULL)
+ ctf_save_write (&writer->tcs, tsv->name, strlen (tsv->name));
+ ctf_save_write (&writer->tcs, &zero, 1);
}
/* This is the implementation of trace_file_write_ops method
@@ -419,8 +539,80 @@ static void
ctf_write_uploaded_tp (struct trace_file_writer *self,
struct uploaded_tp *tp)
{
- /* It is not supported yet to write uploaded tracepoints
- into CTF trace data. */
+ struct ctf_trace_file_writer *writer
+ = (struct ctf_trace_file_writer *) self;
+ int32_t int32;
+ int64_t int64;
+ uint32_t u32;
+ const gdb_byte zero = 0;
+ int a;
+ char *act;
+
+ /* Event Id. */
+ int32 = CTF_EVENT_ID_TP_DEF;
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &int32, 4, 4);
+
+ /* address */
+ int64 = tp->addr;
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
+
+ /* traceframe_usage */
+ int64 = tp->traceframe_usage;
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
+
+ /* number */
+ ctf_save_write_int32 (&writer->tcs, tp->number);
+
+ /* enabled */
+ ctf_save_write_int32 (&writer->tcs, tp->enabled);
+
+ /* step */
+ ctf_save_write_int32 (&writer->tcs, tp->step);
+
+ /* pass */
+ ctf_save_write_int32 (&writer->tcs, tp->pass);
+
+ /* hit_count */
+ ctf_save_write_int32 (&writer->tcs, tp->hit_count);
+
+ /* type */
+ ctf_save_write_int32 (&writer->tcs, tp->type);
+
+ /* condition */
+ if (tp->cond != NULL)
+ ctf_save_write (&writer->tcs, tp->cond, strlen (tp->cond));
+ ctf_save_write (&writer->tcs, &zero, 1);
+
+ /* actions */
+ u32 = VEC_length (char_ptr, tp->actions);
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
+ for (a = 0; VEC_iterate (char_ptr, tp->actions, a, act); ++a)
+ ctf_save_write (&writer->tcs, act, strlen (act) + 1);
+
+ /* step_actions */
+ u32 = VEC_length (char_ptr, tp->step_actions);
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
+ for (a = 0; VEC_iterate (char_ptr, tp->step_actions, a, act); ++a)
+ ctf_save_write (&writer->tcs, act, strlen (act) + 1);
+
+ /* at_string */
+ if (tp->at_string != NULL)
+ ctf_save_write (&writer->tcs, tp->at_string,
+ strlen (tp->at_string));
+ ctf_save_write (&writer->tcs, &zero, 1);
+
+ /* cond_string */
+ if (tp->cond_string != NULL)
+ ctf_save_write (&writer->tcs, tp->cond_string,
+ strlen (tp->cond_string));
+ ctf_save_write (&writer->tcs, &zero, 1);
+
+ /* cmd_strings */
+ u32 = VEC_length (char_ptr, tp->cmd_strings);
+ ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
+ for (a = 0; VEC_iterate (char_ptr, tp->cmd_strings, a, act); ++a)
+ ctf_save_write (&writer->tcs, act, strlen (act) + 1);
+
}
/* This is the implementation of trace_file_write_ops method
@@ -429,7 +621,10 @@ ctf_write_uploaded_tp (struct trace_file_writer *self,
static void
ctf_write_definition_end (struct trace_file_writer *self)
{
- /* Nothing to do for CTF. */
+ struct ctf_trace_file_writer *writer
+ = (struct ctf_trace_file_writer *) self;
+
+ self->ops->frame_ops->end (self);
}
/* The minimal file size of data stream. It is required by
@@ -670,3 +865,984 @@ ctf_trace_file_writer_new (void)
return (struct trace_file_writer *) writer;
}
+
+#if HAVE_LIBBABELTRACE
+/* Use libbabeltrace to read CTF data. The libbabeltrace provides
+ iterator to iterate over each event in CTF data and APIs to get
+ details of event and packet, so it is very convenient to use
+ libbabeltrace to access events in CTF. */
+
+#include <babeltrace/babeltrace.h>
+#include <babeltrace/ctf/events.h>
+#include <babeltrace/ctf/iterator.h>
+
+/* The struct pointer for current CTF directory. */
+static struct bt_context *ctx = NULL;
+static struct bt_ctf_iter *ctf_iter = NULL;
+/* The position of the first packet containing trace frame. */
+static struct bt_iter_pos *start_pos;
+
+/* The name of CTF directory. */
+static char *trace_dirname;
+
+static struct target_ops ctf_ops;
+
+/* Destroy ctf iterator and context. */
+
+static void
+ctf_destroy (void)
+{
+ if (ctf_iter != NULL)
+ {
+ bt_ctf_iter_destroy (ctf_iter);
+ ctf_iter = NULL;
+ }
+ if (ctx != NULL)
+ {
+ bt_context_put (ctx);
+ ctx = NULL;
+ }
+}
+
+/* Open CTF trace data in DIRNAME. */
+
+static void
+ctf_open_dir (char *dirname)
+{
+ int ret;
+ struct bt_iter_pos begin_pos;
+ struct bt_iter_pos *pos;
+
+ ctx = bt_context_create ();
+ if (ctx == NULL)
+ error (_("Unable to create bt_context"));
+ ret = bt_context_add_trace (ctx, dirname, "ctf", NULL, NULL, NULL);
+ if (ret < 0)
+ {
+ ctf_destroy ();
+ error (_("Unable to use libbabeltrace on directory \"%s\""),
+ dirname);
+ }
+
+ begin_pos.type = BT_SEEK_BEGIN;
+ ctf_iter = bt_ctf_iter_create (ctx, &begin_pos, NULL);
+ if (ctf_iter == NULL)
+ {
+ ctf_destroy ();
+ error (_("Unable to create bt_iterator"));
+ }
+
+ /* Iterate over events, and look for an event for register block
+ to set trace_regblock_size. */
+
+ /* Save the current position. */
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ while (1)
+ {
+ const char *name;
+ struct bt_ctf_event *event;
+
+ event = bt_ctf_iter_read_event (ctf_iter);
+
+ name = bt_ctf_event_name (event);
+
+ if (name == NULL)
+ break;
+ else if (strcmp (name, "register") == 0)
+ {
+ const struct bt_definition *scope
+ = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+ const struct bt_definition *array
+ = bt_ctf_get_field (event, scope, "contents");
+
+ trace_regblock_size
+ = bt_ctf_get_array_len (bt_ctf_get_decl_from_def (array));
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+}
+
+#define SET_INT32_FIELD(EVENT, SCOPE, VAR, FIELD) \
+ (VAR)->FIELD = (int) bt_ctf_get_int64 (bt_ctf_get_field ((EVENT), \
+ (SCOPE), \
+ #FIELD))
+
+/* EVENT is the "status" event and TS is filled in. */
+
+static void
+ctf_read_status (struct bt_ctf_event *event, struct trace_status *ts)
+{
+ const struct bt_definition *scope
+ = bt_ctf_get_top_level_scope (event, BT_EVENT_FIELDS);
+
+ SET_INT32_FIELD (event, scope, ts, stop_reason);
+ SET_INT32_FIELD (event, scope, ts, stopping_tracepoint);
+ SET_INT32_FIELD (event, scope, ts, traceframe_count);
+ SET_INT32_FIELD (event, scope, ts, traceframes_created);
+ SET_INT32_FIELD (event, scope, ts, buffer_free);
+ SET_INT32_FIELD (event, scope, ts, buffer_size);
+ SET_INT32_FIELD (event, scope, ts, disconnected_tracing);
+ SET_INT32_FIELD (event, scope, ts, circular_buffer);
+
+ bt_iter_next (bt_ctf_get_iter (ctf_iter));
+}
+
+/* Read the events "tsv_def" one by one, extract its contents and fill
+ in the list UPLOADED_TSVS. */
+
+static void
+ctf_read_tsv (struct uploaded_tsv **uploaded_tsvs)
+{
+ gdb_assert (ctf_iter != NULL);
+
+ while (1)
+ {
+ struct bt_ctf_event *event;
+ const struct bt_definition *scope;
+ const struct bt_definition *def;
+ uint32_t event_id;
+ struct uploaded_tsv *utsv = NULL;
+
+ event = bt_ctf_iter_read_event (ctf_iter);
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_STREAM_EVENT_HEADER);
+ event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
+ "id"));
+ if (event_id != CTF_EVENT_ID_TSV_DEF)
+ break;
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+
+ def = bt_ctf_get_field (event, scope, "number");
+ utsv = get_uploaded_tsv ((int32_t) bt_ctf_get_int64 (def),
+ uploaded_tsvs);
+
+ def = bt_ctf_get_field (event, scope, "builtin");
+ utsv->builtin = (int32_t) bt_ctf_get_int64 (def);
+ def = bt_ctf_get_field (event, scope, "initial_value");
+ utsv->initial_value = bt_ctf_get_int64 (def);
+
+ def = bt_ctf_get_field (event, scope, "name");
+ utsv->name = xstrdup (bt_ctf_get_string (def));
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+}
+
+/* Read the value of element whose index is NUM from CTF and write it
+ to the corresponding VAR->ARRAY. */
+
+#define SET_ARRAY_FIELD(EVENT, SCOPE, VAR, NUM, ARRAY) \
+ do \
+ { \
+ uint32_t u32, i; \
+ const struct bt_definition *def; \
+ \
+ u32 = (uint32_t) bt_ctf_get_uint64 (bt_ctf_get_field ((EVENT), \
+ (SCOPE), \
+ #NUM)); \
+ def = bt_ctf_get_field ((EVENT), (SCOPE), #ARRAY); \
+ for (i = 0; i < u32; i++) \
+ { \
+ const struct bt_definition *element \
+ = bt_ctf_get_index ((EVENT), def, i); \
+ \
+ VEC_safe_push (char_ptr, (VAR)->ARRAY, \
+ xstrdup (bt_ctf_get_string (element))); \
+ } \
+ } \
+ while (0)
+
+/* Read a string from CTF and set VAR->FIELD. If the length of string
+ is zero, set VAR->FIELD to NULL. */
+
+#define SET_STRING_FIELD(EVENT, SCOPE, VAR, FIELD) \
+ do \
+ { \
+ const char *p = bt_ctf_get_string (bt_ctf_get_field ((EVENT), \
+ (SCOPE), \
+ #FIELD)); \
+ \
+ if (strlen (p) > 0) \
+ (VAR)->FIELD = xstrdup (p); \
+ else \
+ (VAR)->FIELD = NULL; \
+ } \
+ while (0)
+
+/* Read the events "tp_def" one by one, extract its contents and fill
+ in the list UPLOADED_TPS. */
+
+static void
+ctf_read_tp (struct uploaded_tp **uploaded_tps)
+{
+ gdb_assert (ctf_iter != NULL);
+
+ while (1)
+ {
+ struct bt_ctf_event *event;
+ const struct bt_definition *scope;
+ uint32_t u32;
+ int32_t int32;
+ uint64_t u64;
+ struct uploaded_tp *utp = NULL;
+
+ event = bt_ctf_iter_read_event (ctf_iter);
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_STREAM_EVENT_HEADER);
+ u32 = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
+ "id"));
+ if (u32 != CTF_EVENT_ID_TP_DEF)
+ break;
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+ int32 = (int32_t) bt_ctf_get_int64 (bt_ctf_get_field (event,
+ scope,
+ "number"));
+ u64 = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
+ "addr"));
+ utp = get_uploaded_tp (int32, u64, uploaded_tps);
+
+ SET_INT32_FIELD (event, scope, utp, enabled);
+ SET_INT32_FIELD (event, scope, utp, step);
+ SET_INT32_FIELD (event, scope, utp, pass);
+ SET_INT32_FIELD (event, scope, utp, hit_count);
+ SET_INT32_FIELD (event, scope, utp, type);
+
+ /* Read 'cmd_strings'. */
+ SET_ARRAY_FIELD (event, scope, utp, cmd_num, cmd_strings);
+ /* Read 'actions'. */
+ SET_ARRAY_FIELD (event, scope, utp, action_num, actions);
+ /* Read 'step_actions'. */
+ SET_ARRAY_FIELD (event, scope, utp, step_action_num,
+ step_actions);
+
+ SET_STRING_FIELD(event, scope, utp, at_string);
+ SET_STRING_FIELD(event, scope, utp, cond_string);
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+}
+
+/* This is the implementation of target_ops method to_open. Open CTF
+ trace data, read trace status, trace state variables and tracepoint
+ definitions from the first packet. Set the start position at the
+ second packet which contains events on trace blocks. */
+
+static void
+ctf_open (char *dirname, int from_tty)
+{
+ struct bt_ctf_event *event;
+ uint32_t event_id;
+ const struct bt_definition *scope;
+ struct uploaded_tsv *uploaded_tsvs = NULL;
+ struct uploaded_tp *uploaded_tps = NULL;
+
+ if (!dirname)
+ error (_("No CTF directory specified."));
+
+ ctf_open_dir (dirname);
+
+ target_preopen (from_tty);
+
+ /* Skip the first packet which about the trace status. The first
+ event is "frame". */
+ event = bt_ctf_iter_read_event (ctf_iter);
+ scope = bt_ctf_get_top_level_scope (event, BT_STREAM_EVENT_HEADER);
+ event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
+ if (event_id != CTF_EVENT_ID_FRAME)
+ error (_("Wrong event id of the first event"));
+ /* The second event is "status". */
+ bt_iter_next (bt_ctf_get_iter (ctf_iter));
+ event = bt_ctf_iter_read_event (ctf_iter);
+ scope = bt_ctf_get_top_level_scope (event, BT_STREAM_EVENT_HEADER);
+ event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
+ if (event_id != CTF_EVENT_ID_STATUS)
+ error (_("Wrong event id of the second event"));
+ ctf_read_status (event, current_trace_status ());
+
+ ctf_read_tsv (&uploaded_tsvs);
+
+ ctf_read_tp (&uploaded_tps);
+
+ event = bt_ctf_iter_read_event (ctf_iter);
+ /* EVENT can be NULL if we've already gone to the end of stream of
+ events. */
+ if (event != NULL)
+ {
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_STREAM_EVENT_HEADER);
+ event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event,
+ scope, "id"));
+ if (event_id != CTF_EVENT_ID_FRAME)
+ error (_("Wrong event id of the first event of the second packet"));
+ }
+
+ start_pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (start_pos->type == BT_SEEK_RESTORE);
+
+ trace_dirname = xstrdup (dirname);
+ push_target (&ctf_ops);
+
+ merge_uploaded_trace_state_variables (&uploaded_tsvs);
+ merge_uploaded_tracepoints (&uploaded_tps);
+}
+
+/* This is the implementation of target_ops method to_close. Destroy
+ CTF iterator and context. */
+
+static void
+ctf_close (void)
+{
+ ctf_destroy ();
+ xfree (trace_dirname);
+ trace_dirname = NULL;
+}
+
+/* This is the implementation of target_ops method to_files_info.
+ Print the directory name of CTF trace data. */
+
+static void
+ctf_files_info (struct target_ops *t)
+{
+ printf_filtered ("\t`%s'\n", trace_dirname);
+}
+
+/* This is the implementation of target_ops method to_fetch_registers.
+ Iterate over events whose name is "register" in current frame,
+ extract contents from events, and set REGCACHE with the contents.
+ If no matched events are found, mark registers unavailable. */
+
+static void
+ctf_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ int offset, regn, regsize, pc_regno;
+ char *regs = NULL;
+ struct bt_ctf_event *event = NULL;
+ struct bt_iter_pos *pos;
+
+ /* An uninitialized reg size says we're not going to be
+ successful at getting register blocks. */
+ if (trace_regblock_size == 0)
+ return;
+
+ gdb_assert (ctf_iter != NULL);
+ /* Save the current position. */
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ while (1)
+ {
+ const char *name;
+ struct bt_ctf_event *event1;
+
+ event1 = bt_ctf_iter_read_event (ctf_iter);
+
+ name = bt_ctf_event_name (event1);
+
+ if (name == NULL || strcmp (name, "frame") == 0)
+ break;
+ else if (strcmp (name, "register") == 0)
+ {
+ event = event1;
+ break;
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+
+ if (event != NULL)
+ {
+ const struct bt_definition *scope
+ = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+ const struct bt_definition *array
+ = bt_ctf_get_field (event, scope, "contents");
+
+ regs = bt_ctf_get_char_array (array);
+ /* Assume the block is laid out in GDB register number order,
+ each register with the size that it has in GDB. */
+ offset = 0;
+ for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
+ {
+ regsize = register_size (gdbarch, regn);
+ /* Make sure we stay within block bounds. */
+ if (offset + regsize >= trace_regblock_size)
+ break;
+ if (regcache_register_status (regcache, regn) == REG_UNKNOWN)
+ {
+ if (regno == regn)
+ {
+ regcache_raw_supply (regcache, regno, regs + offset);
+ break;
+ }
+ else if (regno == -1)
+ {
+ regcache_raw_supply (regcache, regn, regs + offset);
+ }
+ }
+ offset += regsize;
+ }
+ return;
+ }
+
+ regs = alloca (trace_regblock_size);
+
+ /* We get here if no register data has been found. Mark registers
+ as unavailable. */
+ for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
+ regcache_raw_supply (regcache, regn, NULL);
+
+ /* We can often usefully guess that the PC is going to be the same
+ as the address of the tracepoint. */
+ pc_regno = gdbarch_pc_regnum (gdbarch);
+ if (pc_regno >= 0 && (regno == -1 || regno == pc_regno))
+ {
+ struct tracepoint *tp = get_tracepoint (get_tracepoint_number ());
+
+ if (tp != NULL && tp->base.loc)
+ {
+ /* But don't try to guess if tracepoint is multi-location... */
+ if (tp->base.loc->next != NULL)
+ {
+ warning (_("Tracepoint %d has multiple "
+ "locations, cannot infer $pc"),
+ tp->base.number);
+ return;
+ }
+ /* ... or does while-stepping. */
+ if (tp->step_count > 0)
+ {
+ warning (_("Tracepoint %d does while-stepping, "
+ "cannot infer $pc"),
+ tp->base.number);
+ return;
+ }
+
+ store_unsigned_integer (regs, register_size (gdbarch, pc_regno),
+ gdbarch_byte_order (gdbarch),
+ tp->base.loc->address);
+ regcache_raw_supply (regcache, pc_regno, regs);
+ }
+ }
+}
+
+/* This is the implementation of target_ops method to_xfer_partial.
+ Iterate over events whose name is "memory" in
+ current frame, extract the address and length from events. If
+ OFFSET is within the range, read the contents from events to
+ READBUF. */
+
+static LONGEST
+ctf_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset,
+ LONGEST len)
+{
+ /* We're only doing regular memory for now. */
+ if (object != TARGET_OBJECT_MEMORY)
+ return -1;
+
+ if (readbuf == NULL)
+ error (_("ctf_xfer_partial: trace file is read-only"));
+
+ if (get_traceframe_number () != -1)
+ {
+ struct bt_iter_pos *pos;
+ int i = 0;
+
+ gdb_assert (ctf_iter != NULL);
+ /* Save the current position. */
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ /* Iterate through the traceframe's blocks, looking for
+ memory. */
+ while (1)
+ {
+ ULONGEST amt;
+ uint64_t maddr;
+ uint16_t mlen;
+ enum bfd_endian byte_order
+ = gdbarch_byte_order (target_gdbarch ());
+ const struct bt_definition *scope;
+ const struct bt_definition *def;
+ struct bt_ctf_event *event
+ = bt_ctf_iter_read_event (ctf_iter);
+ const char *name = bt_ctf_event_name (event);
+
+ if (strcmp (name, "frame") == 0)
+ break;
+ else if (strcmp (name, "memory") != 0)
+ {
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+
+ continue;
+ }
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+
+ def = bt_ctf_get_field (event, scope, "address");
+ maddr = bt_ctf_get_uint64 (def);
+ def = bt_ctf_get_field (event, scope, "length");
+ mlen = (uint16_t) bt_ctf_get_uint64 (def);
+
+ /* If the block includes the first part of the desired
+ range, return as much it has; GDB will re-request the
+ remainder, which might be in a different block of this
+ trace frame. */
+ if (maddr <= offset && offset < (maddr + mlen))
+ {
+ const struct bt_definition *array
+ = bt_ctf_get_field (event, scope, "contents");
+ const struct bt_declaration *decl
+ = bt_ctf_get_decl_from_def (array);
+ gdb_byte *contents;
+ int k;
+
+ contents = xmalloc (mlen);
+
+ for (k = 0; k < mlen; k++)
+ {
+ const struct bt_definition *element
+ = bt_ctf_get_index (event, array, k);
+
+ contents[k] = (gdb_byte) bt_ctf_get_uint64 (element);
+ }
+
+ amt = (maddr + mlen) - offset;
+ if (amt > len)
+ amt = len;
+
+ memcpy (readbuf, &contents[offset - maddr], amt);
+
+ xfree (contents);
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+
+ return amt;
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+ }
+
+ /* It's unduly pedantic to refuse to look at the executable for
+ read-only pieces; so do the equivalent of readonly regions aka
+ QTro packet. */
+ if (exec_bfd != NULL)
+ {
+ asection *s;
+ bfd_size_type size;
+ bfd_vma vma;
+
+ for (s = exec_bfd->sections; s; s = s->next)
+ {
+ if ((s->flags & SEC_LOAD) == 0
+ || (s->flags & SEC_READONLY) == 0)
+ continue;
+
+ vma = s->vma;
+ size = bfd_get_section_size (s);
+ if (vma <= offset && offset < (vma + size))
+ {
+ ULONGEST amt;
+
+ amt = (vma + size) - offset;
+ if (amt > len)
+ amt = len;
+
+ amt = bfd_get_section_contents (exec_bfd, s,
+ readbuf, offset - vma, amt);
+ return amt;
+ }
+ }
+ }
+
+ /* Indicate failure to find the requested memory block. */
+ return -1;
+}
+
+/* This is the implementation of target_ops method
+ to_get_trace_state_variable_value.
+ Iterate over events whose name is "tsv" in current frame. When the
+ trace variable is found, set the value of it to *VAL and return
+ true, otherwise return false. */
+
+static int
+ctf_get_trace_state_variable_value (int tsvnum, LONGEST *val)
+{
+ struct bt_iter_pos *pos;
+ int found = 0;
+
+ gdb_assert (ctf_iter != NULL);
+ /* Save the current position. */
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ /* Iterate through the traceframe's blocks, looking for 'V'
+ block. */
+ while (1)
+ {
+ struct bt_ctf_event *event
+ = bt_ctf_iter_read_event (ctf_iter);
+ const char *name = bt_ctf_event_name (event);
+
+ if (name == NULL || strcmp (name, "frame") == 0)
+ break;
+ else if (strcmp (name, "tsv") == 0)
+ {
+ const struct bt_definition *scope;
+ const struct bt_definition *def;
+
+ scope = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+
+ def = bt_ctf_get_field (event, scope, "num");
+ if (tsvnum == (int32_t) bt_ctf_get_uint64 (def))
+ {
+ def = bt_ctf_get_field (event, scope, "val");
+ *val = bt_ctf_get_uint64 (def);
+
+ found = 1;
+ }
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+
+ return found;
+}
+
+/* Return the tracepoint number in "frame" event. */
+
+static int
+ctf_get_tpnum_from_frame_event (struct bt_ctf_event *event)
+{
+ /* The packet context of events has a field "tpnum". */
+ const struct bt_definition *scope
+ = bt_ctf_get_top_level_scope (event, BT_STREAM_PACKET_CONTEXT);
+ uint64_t tpnum
+ = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "tpnum"));
+
+ return (int) tpnum;
+}
+
+/* Return the address at which the current frame was collected. */
+
+static CORE_ADDR
+ctf_get_traceframe_address (void)
+{
+ struct bt_ctf_event *event = NULL;
+ struct bt_iter_pos *pos;
+ CORE_ADDR addr = 0;
+
+ gdb_assert (ctf_iter != NULL);
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ while (1)
+ {
+ const char *name;
+ struct bt_ctf_event *event1;
+
+ event1 = bt_ctf_iter_read_event (ctf_iter);
+
+ name = bt_ctf_event_name (event1);
+
+ if (name == NULL)
+ break;
+ else if (strcmp (name, "frame") == 0)
+ {
+ event = event1;
+ break;
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ if (event != NULL)
+ {
+ int tpnum = ctf_get_tpnum_from_frame_event (event);
+ struct tracepoint *tp
+ = get_tracepoint_by_number_on_target (tpnum);
+
+ if (tp && tp->base.loc)
+ addr = tp->base.loc->address;
+ }
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+
+ return addr;
+}
+
+/* This is the implementation of target_ops method to_trace_find.
+ Iterate the events whose name is "frame", extract the tracepoint
+ number in it. Return traceframe number when matched. */
+
+static int
+ctf_trace_find (enum trace_find_type type, int num,
+ CORE_ADDR addr1, CORE_ADDR addr2, int *tpp)
+{
+ int ret = -1;
+ int tfnum = 0;
+ int found = 0;
+ struct bt_iter_pos pos;
+
+ if (num == -1)
+ {
+ if (tpp != NULL)
+ *tpp = -1;
+ return -1;
+ }
+
+ gdb_assert (ctf_iter != NULL);
+ /* Set iterator back to the start. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), start_pos);
+
+ while (1)
+ {
+ int id;
+ struct bt_ctf_event *event;
+ const char *name;
+
+ event = bt_ctf_iter_read_event (ctf_iter);
+
+ name = bt_ctf_event_name (event);
+
+ if (event == NULL || name == NULL)
+ break;
+
+ if (strcmp (name, "frame") == 0)
+ {
+ CORE_ADDR tfaddr;
+
+ if (type == tfind_number)
+ {
+ /* Looking for a specific trace frame. */
+ if (tfnum == num)
+ found = 1;
+ }
+ else
+ {
+ /* Start from the _next_ trace frame. */
+ if (tfnum > get_traceframe_number ())
+ {
+ switch (type)
+ {
+ case tfind_tp:
+ {
+ struct tracepoint *tp = get_tracepoint (num);
+
+ if (tp != NULL
+ && (tp->number_on_target
+ == ctf_get_tpnum_from_frame_event (event)))
+ found = 1;
+ break;
+ }
+ case tfind_pc:
+ tfaddr = ctf_get_traceframe_address ();
+ if (tfaddr == addr1)
+ found = 1;
+ break;
+ case tfind_range:
+ tfaddr = ctf_get_traceframe_address ();
+ if (addr1 <= tfaddr && tfaddr <= addr2)
+ found = 1;
+ break;
+ case tfind_outside:
+ tfaddr = ctf_get_traceframe_address ();
+ if (!(addr1 <= tfaddr && tfaddr <= addr2))
+ found = 1;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("unknown tfind type"));
+ }
+ }
+ }
+ if (found)
+ {
+ if (tpp != NULL)
+ *tpp = ctf_get_tpnum_from_frame_event (event);
+
+ /* Skip the event "frame". */
+ bt_iter_next (bt_ctf_get_iter (ctf_iter));
+
+ return tfnum;
+ }
+ tfnum++;
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+
+ return -1;
+}
+
+/* This is the implementation of target_ops method to_has_stack.
+ The target has a stack when GDB has already selected one trace
+ frame. */
+
+static int
+ctf_has_stack (struct target_ops *ops)
+{
+ return get_traceframe_number () != -1;
+}
+
+/* This is the implementation of target_ops method to_has_registers.
+ The target has registers when GDB has already selected one trace
+ frame. */
+
+static int
+ctf_has_registers (struct target_ops *ops)
+{
+ return get_traceframe_number () != -1;
+}
+
+/* This is the implementation of target_ops method to_traceframe_info.
+ Iterate the events whose name is "memory", in current
+ frame, extract memory range information, and return them in
+ traceframe_info. */
+
+static struct traceframe_info *
+ctf_traceframe_info (void)
+{
+ struct traceframe_info *info = XCNEW (struct traceframe_info);
+ const char *name;
+ struct bt_iter_pos *pos;
+
+ gdb_assert (ctf_iter != NULL);
+ /* Save the current position. */
+ pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
+ gdb_assert (pos->type == BT_SEEK_RESTORE);
+
+ do
+ {
+ struct bt_ctf_event *event
+ = bt_ctf_iter_read_event (ctf_iter);
+
+ name = bt_ctf_event_name (event);
+
+ if (name == NULL || strcmp (name, "register") == 0
+ || strcmp (name, "frame") == 0)
+ ;
+ else if (strcmp (name, "memory") == 0)
+ {
+ const struct bt_definition *scope
+ = bt_ctf_get_top_level_scope (event,
+ BT_EVENT_FIELDS);
+ const struct bt_definition *def;
+ struct mem_range *r;
+
+ r = VEC_safe_push (mem_range_s, info->memory, NULL);
+ def = bt_ctf_get_field (event, scope, "address");
+ r->start = bt_ctf_get_uint64 (def);
+
+ def = bt_ctf_get_field (event, scope, "length");
+ r->length = (uint16_t) bt_ctf_get_uint64 (def);
+ }
+ else
+ {
+ warning (_("Unhandled trace block type (%s) "
+ "while building trace frame info."),
+ name);
+ }
+
+ if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
+ break;
+ }
+ while (name != NULL && strcmp (name, "frame") != 0);
+
+ /* Restore the position. */
+ bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
+
+ return info;
+}
+
+/* This is the implementation of target_ops method to_get_trace_status.
+ The trace status for a file is that tracing can never be run. */
+
+static int
+ctf_get_trace_status (struct trace_status *ts)
+{
+ /* Other bits of trace status were collected as part of opening the
+ trace files, so nothing to do here. */
+
+ return -1;
+}
+
+static void
+init_ctf_ops (void)
+{
+ memset (&ctf_ops, 0, sizeof (ctf_ops));
+
+ ctf_ops.to_shortname = "ctf";
+ ctf_ops.to_longname = "CTF file";
+ ctf_ops.to_doc = "Use a CTF directory as a target.\n\
+Specify the filename of the CTF directory.";
+ ctf_ops.to_open = ctf_open;
+ ctf_ops.to_close = ctf_close;
+ ctf_ops.to_fetch_registers = ctf_fetch_registers;
+ ctf_ops.to_xfer_partial = ctf_xfer_partial;
+ ctf_ops.to_files_info = ctf_files_info;
+ ctf_ops.to_get_trace_status = ctf_get_trace_status;
+ ctf_ops.to_trace_find = ctf_trace_find;
+ ctf_ops.to_get_trace_state_variable_value
+ = ctf_get_trace_state_variable_value;
+ ctf_ops.to_stratum = process_stratum;
+ ctf_ops.to_has_stack = ctf_has_stack;
+ ctf_ops.to_has_registers = ctf_has_registers;
+ ctf_ops.to_traceframe_info = ctf_traceframe_info;
+ ctf_ops.to_magic = OPS_MAGIC;
+}
+
+#endif
+
+/* -Wmissing-prototypes */
+
+extern initialize_file_ftype _initialize_ctf;
+
+/* module initialization */
+
+void
+_initialize_ctf (void)
+{
+#if HAVE_LIBBABELTRACE
+ init_ctf_ops ();
+
+ add_target (&ctf_ops);
+#endif
+}
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index bf7e25e..6974b5c 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -12307,13 +12307,33 @@ that can be shared by multiple debugging and tracing tools. Please go to
@kindex target tfile
@kindex tfile
+@kindex target ctf
+@kindex ctf
@item target tfile @var{filename}
-Use the file named @var{filename} as a source of trace data. Commands
-that examine data work as they do with a live target, but it is not
-possible to run any new trace experiments. @code{tstatus} will report
-the state of the trace run at the moment the data was saved, as well
-as the current trace frame you are examining. @var{filename} must be
-on a filesystem accessible to the host.
+@itemx target ctf @var{dirname}
+Use the file named @var{filename} or directory named @var{dirname} as
+a source of trace data. Commands that examine data work as they do with
+a live target, but it is not possible to run any new trace experiments.
+@code{tstatus} will report the state of the trace run at the moment
+the data was saved, as well as the current trace frame you are examining.
+@var{filename} or @var{dirname} must be on a filesystem accessible to
+the host.
+
+@smallexample
+(@value{GDBP}) target ctf ctf.ctf
+(@value{GDBP}) tfind
+Found trace frame 0, tracepoint 2
+39 ++a; /* set tracepoint 1 here */
+(@value{GDBP}) tdump
+Data collected at tracepoint 2, trace frame 0:
+i = 0
+a = 0
+b = 1 '\001'
+c = @{"123", "456", "789", "123", "456", "789"@}
+d = @{@{@{a = 1, b = 2@}, @{a = 3, b = 4@}@}, @{@{a = 5, b = 6@}, @{a = 7, b = 8@}@}@}
+(@value{GDBP}) p b
+$1 = 1
+@end smallexample
@end table
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
index 5fa1b97..be2bb3e 100644
--- a/gdb/testsuite/gdb.trace/actions.exp
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -310,6 +310,9 @@ gdb_test_no_output "tstop" ""
set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'\.\\r"
+gdb_test "tsave -ctf ${tracefile}.ctf" \
+ "Trace data saved to directory '${tracefile}.ctf'\.\\r" \
+ "save ctf trace file"
# Restart GDB and read the trace data in tfile target.
gdb_exit
@@ -319,3 +322,24 @@ gdb_file_cmd $binfile
gdb_test "target tfile ${tracefile}.tf" ".*" \
"change to tfile target"
check_tracepoint "tfile"
+
+# Try to read ctf data if GDB supports.
+set gdb_can_read_ctf_data 0
+gdb_test_multiple "target ctf" "" {
+ -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
+ set gdb_can_read_ctf_data 0
+ }
+ -re "No CTF directory specified.*\r\n$gdb_prompt $" {
+ set gdb_can_read_ctf_data 1
+ }
+}
+
+if { $gdb_can_read_ctf_data } {
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_file_cmd $binfile
+ gdb_test "target ctf ${tracefile}.ctf" ".*" \
+ "change to ctf target"
+ check_tracepoint "ctf"
+}
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index 3c3025d..8bb71e4 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -412,6 +412,11 @@ gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
+# Save trace frames to ctf.
+gdb_test "tsave -ctf ${tracefile}.ctf" \
+ "Trace data saved to directory '${tracefile}.ctf'.*" \
+ "save ctf trace file"
+
# Change target to tfile.
set test "change to tfile target"
gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
@@ -425,3 +430,12 @@ gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
}
# Test the collected trace frames from tfile.
use_collected_data "tfile"
+
+# Try to read ctf data if GDB supports.
+gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
+ -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
+ }
+ -re ".*\r\n$gdb_prompt $" {
+ use_collected_data "ctf"
+ }
+}
diff --git a/gdb/testsuite/gdb.trace/tstatus.exp b/gdb/testsuite/gdb.trace/tstatus.exp
index 74d0c27..c709ad8 100644
--- a/gdb/testsuite/gdb.trace/tstatus.exp
+++ b/gdb/testsuite/gdb.trace/tstatus.exp
@@ -142,6 +142,10 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
+# Save trace frames to CTF.
+gdb_test "tsave -ctf ${tracefile}.ctf" \
+ "Trace data saved to directory '${tracefile}.ctf'.*" \
+ "save ctf trace file"
# Change target to tfile.
set test "change to tfile target"
@@ -162,3 +166,13 @@ set tstatus_output [string map {\) \\)} $tstatus_output]
# The status should be identical to the status of live inferior.
gdb_test "tstatus" "Using a trace file\.\r\n${tstatus_output}.*" \
"tstatus on tfile target"
+
+# Change target to ctf if GDB supports.
+gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
+ -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
+ }
+ -re ".*\r\n$gdb_prompt $" {
+ gdb_test "tstatus" "Using a trace file\.\r\n${tstatus_output}.*" \
+ "tstatus on ctf target"
+ }
+}
diff --git a/gdb/testsuite/gdb.trace/tsv.exp b/gdb/testsuite/gdb.trace/tsv.exp
index 6e88adc..76b8645 100644
--- a/gdb/testsuite/gdb.trace/tsv.exp
+++ b/gdb/testsuite/gdb.trace/tsv.exp
@@ -147,6 +147,10 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
+# Save trace frames to ctf.
+gdb_test "tsave -ctf ${tracefile}.ctf" \
+ "Trace data saved to directory '${tracefile}.ctf'.*" \
+ "save ctf trace file"
proc check_tsv { data_source } {
with_test_prefix "${data_source}" {
@@ -174,4 +178,13 @@ gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
}
# Check the tsv from tfile.
+
check_tsv "tfile"
+# Try to read ctf data if GDB supports.
+gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
+ -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
+ }
+ -re ".*\r\n$gdb_prompt $" {
+ check_tsv "ctf"
+ }
+}
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
index 0b823a4..da9b14a 100644
--- a/gdb/testsuite/gdb.trace/while-stepping.exp
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -136,6 +136,9 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'\.\\r" \
"save tfile trace file"
+gdb_test "tsave -ctf ${tracefile}.ctf" \
+ "Trace data saved to directory '${tracefile}.ctf'\.\\r" \
+ "save ctf trace file"
# Restart GDB and read the trace data in tfile target.
gdb_exit
@@ -145,3 +148,24 @@ gdb_file_cmd $binfile
gdb_test "target tfile ${tracefile}.tf" ".*" \
"change to tfile target"
check_tracepoint "tfile"
+
+# Try to read ctf data if GDB supports.
+set gdb_can_read_ctf_data 0
+gdb_test_multiple "target ctf" "" {
+ -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
+ set gdb_can_read_ctf_data 0
+ }
+ -re "No CTF directory specified.*\r\n$gdb_prompt $" {
+ set gdb_can_read_ctf_data 1
+ }
+}
+
+if { $gdb_can_read_ctf_data } {
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_file_cmd $binfile
+ gdb_test "target ctf ${tracefile}.ctf" ".*" \
+ "change to ctf target"
+ check_tracepoint "ctf"
+}
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
index 3d8b131..c9ffc77 100644
--- a/gdb/tracepoint.c
+++ b/gdb/tracepoint.c
@@ -127,14 +127,6 @@ extern void (*deprecated_readline_end_hook) (void);
typedef struct trace_state_variable tsv_s;
DEF_VEC_O(tsv_s);
-/* An object describing the contents of a traceframe. */
-
-struct traceframe_info
-{
- /* Collected memory. */
- VEC(mem_range_s) *memory;
-};
-
static VEC(tsv_s) *tvariables;
/* The next integer to assign to a variable. */
@@ -3303,8 +3295,6 @@ static const struct trace_file_write_ops tfile_write_ops =
#define TRACE_WRITE_V_BLOCK(writer, num, val) \
writer->ops->frame_ops->write_v_block ((writer), (num), (val))
-extern int trace_regblock_size;
-
/* Save tracepoint data to file named FILENAME through WRITER. WRITER
determines the trace file format. If TARGET_DOES_SAVE is non-zero,
the save is performed on the target, otherwise GDB obtains all trace
@@ -3741,6 +3731,12 @@ get_traceframe_number (void)
return traceframe_number;
}
+int
+get_tracepoint_number (void)
+{
+ return tracepoint_number;
+}
+
/* Make the traceframe NUM be the current trace frame. Does nothing
if NUM is already current. */
@@ -3859,7 +3855,7 @@ free_uploaded_tps (struct uploaded_tp **utpp)
/* Given a number and address, return an uploaded tracepoint with that
number, creating if necessary. */
-static struct uploaded_tsv *
+struct uploaded_tsv *
get_uploaded_tsv (int num, struct uploaded_tsv **utsvp)
{
struct uploaded_tsv *utsv;
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
index 8df906f..f88394b 100644
--- a/gdb/tracepoint.h
+++ b/gdb/tracepoint.h
@@ -24,6 +24,14 @@
#include "memrange.h"
#include "gdb_vecs.h"
+/* An object describing the contents of a traceframe. */
+
+struct traceframe_info
+{
+ /* Collected memory. */
+ VEC(mem_range_s) *memory;
+};
+
/* A trace state variable is a value managed by a target being
traced. A trace state variable (or tsv for short) can be accessed
and assigned to by tracepoint actions and conditionals, but is not
@@ -142,6 +150,8 @@ struct trace_status *current_trace_status (void);
extern char *default_collect;
+extern int trace_regblock_size;
+
/* Struct to collect random info about tracepoints on the target. */
struct uploaded_tp
@@ -324,6 +334,9 @@ extern void (*deprecated_trace_start_stop_hook) (int start, int from_tty);
/* Returns the current traceframe number. */
extern int get_traceframe_number (void);
+/* Returns the tracepoint number for current traceframe. */
+extern int get_tracepoint_number (void);
+
/* Make the traceframe NUM be the current GDB trace frame number, and
do nothing more. In particular, this does not flush the
register/frame caches or notify the target about the trace frame
@@ -368,6 +381,8 @@ extern void parse_tsv_definition (char *line, struct uploaded_tsv **utsvp);
extern struct uploaded_tp *get_uploaded_tp (int num, ULONGEST addr,
struct uploaded_tp **utpp);
+extern struct uploaded_tsv *get_uploaded_tsv (int num,
+ struct uploaded_tsv **utsvp);
extern struct tracepoint *create_tracepoint_from_upload (struct uploaded_tp *utp);
extern void merge_uploaded_tracepoints (struct uploaded_tp **utpp);
extern void merge_uploaded_trace_state_variables (struct uploaded_tsv **utsvp);
--
1.7.7.6
More information about the Gdb-patches
mailing list