[PATCH] Implement new `info core mappings' command
Sergio Durigan Junior
sergiodj@redhat.com
Thu Oct 27 18:09:00 GMT 2011
Hello Eli,
Thanks for the review.
Eli Zaretskii <eliz@gnu.org> writes:
>> From: Sergio Durigan Junior <sergiodj@redhat.com>
>> Date: Wed, 26 Oct 2011 19:07:45 -0200
>> + while (argv != NULL && *argv != NULL)
>> + {
>> + if (strncmp (argv[0], "mappings", strlen (argv[0])) == 0)
>> + {
>> + mappings_f = 1;
>> + }
>> + else if (strncmp (argv[0], "all", strlen (argv[0])) == 0)
>> + {
>> + all = 1;
>> + }
>> + argv++;
>> + }
>
> What is this "all" stuff about?
Removed. Since it only has 1 valid command (`mappings'), you're right,
we don't need the `all'.
>> +@cindex core dump file
>
> This index entry is too general, it sounds like this section describes
> everything about core dump files that GDB supports. Better qualify
> it, e.g.
>
> @cindex core dump file, list mapped memory
Ok, I did my best to rewrite the @cindex using better sentences. Hope
it's good now.
>> One thing I am not sure is where to put the entry for this command on
>> the documentation. I decided to put it below `info proc', but I'd be
>> glad if you could give your opinions.
>
> I don't think it's good to put it in the same section as "info proc",
> because we say at the beginning of the section
>
> Many versions of SVR4 and compatible systems provide a facility called
> @samp{/proc} that can be used to examine the image of a running
> process using file-system subroutines.
>
> But this new command has nothing to do with /proc, and does not need
> /proc support to work, right?
>
> If /proc is indeed irrelevant, then I'd prefer a separate @subsection
> alongside this one. You'd need to add some short explanation of the
> background and use case(s) for this command, but having that is a good
> idea anyway: as written now, this command lands on the reader out of
> the blue, more or less.
Ok, thanks for the directions. I rewrote this part of the patch (see
below) to address all the comments. Please, let me know what you think.
Thank you,
Sergio.
diff --git a/gdb/NEWS b/gdb/NEWS
index 5cdb63e..d04fbe6 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -3,6 +3,9 @@
*** Changes since GDB 7.3.1
+* GDB has a new `info core mappings' command. It displays the memory
+ regions in a corefile, similar to `info proc mappings' command.
+
* GDB has two new commands: "set remote hardware-watchpoint-length-limit"
and "show remote hardware-watchpoint-length-limit". These allows to
set or show the maximum length limit (in bytes) of a remote
diff --git a/gdb/corefile.c b/gdb/corefile.c
index ce3b755..3f147f8 100644
--- a/gdb/corefile.c
+++ b/gdb/corefile.c
@@ -24,17 +24,23 @@
#include <errno.h>
#include <signal.h>
#include <fcntl.h>
+#include <ctype.h>
#include "inferior.h"
#include "symtab.h"
+#include "gdbarch.h"
+#include "arch-utils.h"
#include "command.h"
#include "gdbcmd.h"
#include "bfd.h"
+#include "elf-bfd.h"
+#include "elf/internal.h"
#include "target.h"
#include "gdbcore.h"
#include "dis-asm.h"
#include "gdb_stat.h"
#include "completer.h"
#include "exceptions.h"
+#include "objfiles.h"
/* Local function declarations. */
@@ -83,6 +89,185 @@ core_file_command (char *filename, int from_tty)
}
+/* Helper function for `print_core_map'. It is used to iterate
+ over the corefile's sections and print proper information about
+ memory-mappings.
+
+ BFD is the bfd used to get the sections.
+ SECT is the current section being "visited".
+ OBJ is not used. */
+
+static void
+print_proc_map_iter (bfd *bfd, asection *sect, void *obj)
+{
+ /* We're interested in matching sections' names beginning with
+ `load', because they are the sections containing information
+ about the process' memory regions. */
+ static const char *proc_map_match = "load";
+ int proc_map_match_size = strlen (proc_map_match);
+ /* Flag to indicate whether we have found something. */
+ int found = 0;
+ /* The section's size. */
+ bfd_size_type secsize;
+ /* We have to know the bitness of this architecture. */
+ int bitness;
+ /* We'll use these later. They are basically used for iterating
+ over every objfile in the system so that we can find needed
+ information about the memory region being examinated. */
+ struct obj_section *s = NULL;
+ struct objfile *objfile = NULL;
+ /* Fields to be printed for the proc map. */
+ unsigned long start = 0, end = 0;
+ unsigned int size = 0;
+ char *filename = NULL;
+
+ if (strncmp (proc_map_match, sect->name, proc_map_match_size) != 0)
+ /* This section is not useful. */
+ return;
+
+ bitness = gdbarch_addr_bit (gdbarch_from_bfd (bfd));
+
+ /* Unfortunately, some sections in the corefile don't have any
+ content inside. This is bad because we need to print, among
+ other things, its final address in the memory (which is
+ impossible to know if we don't have a size). That's why we
+ first need to check if the section's got anything inside it. */
+ secsize = bfd_section_size (bfd, sect);
+
+ if (secsize == 0)
+ {
+ /* Ok, the section is empty. In this case, we must look inside
+ ELF's Program Header, because (at least) there we have
+ information about the section's size. That's what we're doing
+ here. */
+ Elf_Internal_Phdr *p = elf_tdata (bfd)->phdr;
+ if (p != NULL)
+ {
+ int i;
+ unsigned int n = elf_elfheader (bfd)->e_phnum;
+ for (i = 0; i < n; i++, p++)
+ /* For each entry in the Program Header, we have to
+ check if the section's initial address is equal to
+ the entry's virtual address. If it is, then we
+ have just found the section's entry in the Program
+ Header, and can use the entry's information to
+ complete missing data from the section. */
+ if (sect->vma == p->p_vaddr)
+ {
+ found = 1;
+ break;
+ }
+ if (found)
+ secsize = p->p_memsz;
+ }
+ }
+
+ size = secsize;
+ start = sect->vma;
+ end = (unsigned long) (sect->vma + size);
+
+ /* Now begins a new part of the work. We still don't have complete
+ information about the memory region. For example, we still need
+ to know the filename which is represented by the region. Such
+ info can be gathered from the objfile's data structure, and for
+ that we must iterate over all the objsections and check if the
+ objsection's initial address is inside the section we have at hand.
+ If it is, then we can use this specific objsection to obtain the
+ missing data. */
+ found = 0;
+ ALL_OBJSECTIONS (objfile, s)
+ if (obj_section_addr (s) >= start
+ && obj_section_addr (s) <= end)
+ {
+ found = 1;
+ break;
+ }
+
+ if (found)
+ filename = s->objfile->name;
+
+ if (bitness == 32)
+ printf_filtered ("\t%#10lx %#10lx %#10x %7s\n",
+ start,
+ end,
+ (int) size,
+ filename ? filename : "");
+ else
+ printf_filtered (" %#18lx %#18lx %#10x %7s\n",
+ start,
+ end,
+ (int) size,
+ filename ? filename : "");
+}
+
+/* Implements the `info proc map' command when the user has provided
+ a corefile. */
+
+static void
+print_core_map (void)
+{
+ const char *exe;
+ int bitness;
+
+ gdb_assert (core_bfd != NULL);
+
+ bitness = gdbarch_addr_bit (gdbarch_from_bfd (core_bfd));
+
+ /* Getting the executable name. */
+ exe = bfd_core_file_failing_command (core_bfd);
+
+ printf_filtered (_("exe = '%s'\n"), exe);
+ printf_filtered (_("Mapped address spaces:\n\n"));
+ if (bitness == 32)
+ printf_filtered ("\t%10s %10s %10s %7s\n",
+ "Start Addr",
+ " End Addr",
+ " Size", "objfile");
+ else
+ printf_filtered (" %18s %18s %10s %7s\n",
+ "Start Addr",
+ " End Addr",
+ " Size", "objfile");
+
+ bfd_map_over_sections (core_bfd,
+ print_proc_map_iter,
+ NULL);
+}
+
+/* Implement the `info core' command. */
+
+static void
+info_core_cmd (char *args, int from_tty)
+{
+ char **argv = NULL;
+ int mappings_f = 0;
+ struct cleanup *c = NULL;
+
+ if (!core_bfd)
+ error (_("You are not using a corefile at the moment."));
+
+ if (args)
+ {
+ /* Break up 'args' into an argv array. */
+ argv = gdb_buildargv (args);
+ c = make_cleanup_freeargv (argv);
+ }
+ while (argv != NULL && *argv != NULL)
+ {
+ if (strncmp (argv[0], "mappings", strlen (argv[0])) == 0)
+ {
+ mappings_f = 1;
+ }
+ argv++;
+ }
+
+ if (mappings_f)
+ print_core_map ();
+
+ if (c)
+ do_cleanups (c);
+}
+
/* If there are two or more functions that wish to hook into
exec_file_command, this function will call all of the hook
functions. */
@@ -450,6 +635,11 @@ _initialize_core (void)
{
struct cmd_list_element *c;
+ add_info ("core", info_core_cmd, _("\
+Show information about a corefile.\n\
+Specify any of the following keywords for detailed info:\n\
+ mappings -- list of mapped memory regions."));
+
c = add_cmd ("core-file", class_files, core_file_command, _("\
Use FILE as core dump for examining memory and registers.\n\
No arg means have no core file. This command has been superseded by the\n\
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 3e78832..427811e 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -17713,6 +17713,56 @@ processes and all the threads within each process.
For QNX Neutrino only, this command displays the list of all mapinfos.
@end table
+@node Process Information from Core Dump File
+@subsection Process Information from Core Dump File
+@cindex examine core dump file process information
+@cindex process info via core dump file
+
+If your system supports the generation of core dump files (core files), you
+can use them to obtain information about processes. For that, you can use
+the command @code{info core} inside @value{GDBN} to report information like
+the memory mappings of the process when the core dump was generated.
+@code{info core} works only on systems that support core dump files, and only
+when you are using a core dump file inside @value{GDBN}.
+
+@xref{Core File Generation}, for information on how to generate core dump
+files inside @value{GDBN}. @xref{Files}, for information on invoking
+@value{GDBN} in the post-mortem debugging mode.
+
+@table @code
+@kindex info core
+@cindex core dump file, process information
+@item info core
+@itemx info core mappings
+@cindex memory address space mappings inside a core dump file
+Report the memory address ranges accessible in the core dump file. Assuming
+you have a core dump file and it is loaded into @value{GDBN}, the output of
+the command will be similar to:
+
+@smallexample
+(@value{GDBP}) info core mappings
+exe = '/tmp/a.out'
+Mapped address spaces:
+
+ Start Addr End Addr Size objfile
+ 0x400000 0x401000 0x1000 /tmp/a.out
+ 0x600000 0x601000 0x1000 /tmp/a.out
+ 0x397de00000 0x397de1f000 0x1f000 /usr/lib/debug/lib64/ld-2.13.so.debug
+ 0x397e01e000 0x397e01f000 0x1000 /usr/lib/debug/lib64/ld-2.13.so.debug
+ 0x397e01f000 0x397e020000 0x1000 /usr/lib/debug/lib64/ld-2.13.so.debug
+ 0x397e020000 0x397e021000 0x1000 /usr/lib/debug/lib64/ld-2.13.so.debug
+ 0x397e200000 0x397e391000 0x191000 /usr/lib/debug/lib64/libc-2.13.so.debug
+ 0x397e591000 0x397e595000 0x4000 /usr/lib/debug/lib64/libc-2.13.so.debug
+ 0x397e595000 0x397e596000 0x1000 /usr/lib/debug/lib64/libc-2.13.so.debug
+ 0x397e596000 0x397e59c000 0x6000
+ 0x7ffff7fd1000 0x7ffff7fd4000 0x3000
+ 0x7ffff7ffd000 0x7ffff7ffe000 0x1000
+ 0x7ffff7ffe000 0x7ffff7fff000 0x1000 system-supplied DSO at 0x7ffff7ffe000
+ 0x7ffffffde000 0x7ffffffff000 0x21000
+ 0xffffffffff600000 0xffffffffff601000 0x1000
+@end smallexample
+@end table
+
@node DJGPP Native
@subsection Features for Debugging @sc{djgpp} Programs
@cindex @sc{djgpp} debugging
diff --git a/gdb/testsuite/gdb.base/corefile.exp b/gdb/testsuite/gdb.base/corefile.exp
index 5b0cdf1..190281c 100644
--- a/gdb/testsuite/gdb.base/corefile.exp
+++ b/gdb/testsuite/gdb.base/corefile.exp
@@ -171,6 +171,13 @@ gdb_test_multiple "x/8bd buf2" "$test" {
}
}
+# Test the `info core mapping' command.
+set ws "\[ \t\]+"
+set test "test info core mapping"
+gdb_test "info core mapping" \
+ ".*Mapped address spaces:.*${hex}${ws}${hex}${ws}${hex}.*" \
+ $test
+
# test reinit_frame_cache
gdb_load ${binfile}
More information about the Gdb-patches
mailing list