eliminate deprecated_add_set_cmd
Pedro Alves
pedro@codesourcery.com
Tue May 12 17:10:00 GMT 2009
Hi guys, I apologise for the delay in getting back to this.
On Friday 09 January 2009 14:09:26, Eli Zaretskii wrote:
> > From: Pedro Alves <pedro@codesourcery.com>
> > Date: Wed, 7 Jan 2009 21:33:56 +0000
> > Cc: Thomas Schwinge <tschwinge@gnu.org>, Joel Brobecker <brobecker@adacore.com>, Eli Zaretskii <eliz@gnu.org>, ams@gnu.org
> >
> > Eli, are the doco bits OK?
>
The patch at the bottom is now checked in. I've managed to bork
up my debian/Hurd VM (*), and I don't remember if I ever build this
patch on the Hurd. :-/ I apologise if this breaks anything, but it
should be trivial/obvious to fix if so. :-)
* - hint: don't apt-get dist-upgrade with no drive space left!
> Yes, but I think the change in show-debug-regs warrants an entry in
> NEWS.
How's this?
* NEWS: Mention that the `maint show-debug-registers' and
`gnu-debug' commands were renamed to `maint set
show-debug-registers' and `set debug gnu-nat' respectivelly.
---
gdb/NEWS | 14 ++++++++++++++
1 file changed, 14 insertions(+)
Index: src/gdb/NEWS
===================================================================
--- src.orig/gdb/NEWS 2009-05-12 17:51:36.000000000 +0100
+++ src/gdb/NEWS 2009-05-12 18:03:34.000000000 +0100
@@ -300,6 +300,20 @@ show tcp connect-timeout
with a specified timeout period; this is useful if the stub is launched
in parallel with GDB but may not be ready to accept connections immediately.
+maint set show-debug-registers (on|off)
+maint show show-debug-registers
+ The `maint show-debug-registers' command found in previous versions
+ of GDB has been renamed `maint set show-debug-registers' for
+ consistency with other commands, and `maint show
+ show-debug-registers' has been added.
+
+set debug gnu-nat (on|off)
+show debug gnu-nat
+ The previously undocumented `gnu-debug' command has been renamed
+ `set debug gnu-nat' for consistency with other commands, and `show
+ debug gnu-nat' has been added. These commands allow turning on or
+ off debugging messages from the GNU Hurd debug support.
+
* New native configurations
x86/x86_64 Darwin i[34567]86-*-darwin*
=============================================================
This is what I've already applied:
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
---
gdb/cli/cli-decode.c | 11 -----------
gdb/command.h | 10 ----------
gdb/doc/gdb.texinfo | 11 +++++++++--
gdb/gnu-nat.c | 13 +++++++++----
gdb/i386-nat.c | 12 ++++++++----
gdb/mips-linux-nat.c | 13 ++++++++-----
6 files changed, 34 insertions(+), 36 deletions(-)
Index: src/gdb/cli/cli-decode.c
===================================================================
--- src.orig/gdb/cli/cli-decode.c 2009-03-25 21:42:34.000000000 +0000
+++ src/gdb/cli/cli-decode.c 2009-05-12 17:22:14.000000000 +0100
@@ -397,17 +397,6 @@ add_setshow_cmd_full (char *name,
*show_result = show;
}
-struct cmd_list_element *
-deprecated_add_set_cmd (char *name,
- enum command_class class,
- var_types var_type,
- void *var,
- char *doc,
- struct cmd_list_element **list)
-{
- return add_set_or_show_cmd (name, set_cmd, class, var_type, var, doc, list);
-}
-
/* Add element named NAME to command list LIST (the list for set or
some sublist thereof). CLASS is as in add_cmd. ENUMLIST is a list
of strings which may follow NAME. VAR is address of the variable
Index: src/gdb/command.h
===================================================================
--- src.orig/gdb/command.h 2009-02-06 21:33:58.000000000 +0000
+++ src/gdb/command.h 2009-05-12 17:22:14.000000000 +0100
@@ -205,16 +205,6 @@ extern void help_list (struct cmd_list_e
extern void help_cmd_list (struct cmd_list_element *, enum command_class,
char *, int, struct ui_file *);
-/* NOTE: cagney/2005-02-21: Since every set command should be paired
- with a corresponding show command (i.e., add_setshow_*) this call
- should not be needed. Unfortunatly some are not (e.g.,
- "maintenance <variable> <value>") and those need to be fixed. */
-extern struct cmd_list_element *deprecated_add_set_cmd (char *name, enum
- command_class class,
- var_types var_type, void *var,
- char *doc,
- struct cmd_list_element **list);
-
/* Method for show a set/show variable's VALUE on FILE. If this
method isn't supplied deprecated_show_value_hack() is called (which
is not good). */
Index: src/gdb/gnu-nat.c
===================================================================
--- src.orig/gdb/gnu-nat.c 2009-04-19 18:17:08.000000000 +0100
+++ src/gdb/gnu-nat.c 2009-05-12 17:22:14.000000000 +0100
@@ -3410,10 +3410,15 @@ _initialize_gnu_nat (void)
add_task_commands ();
add_thread_commands ();
- deprecated_add_set_cmd ("gnu-debug", class_maintenance,
- var_boolean, (char *) &gnu_debug_flag,
- "Set debugging output for the gnu backend.",
- &maintenancelist);
+ add_setshow_boolean_cmd ("gnu-nat", class_maintenance,
+ &gnu_debug_flag,
+ _("Set debugging output for the gnu backend."),
+ _("Show debugging output for the gnu backend."),
+ NULL,
+ NULL,
+ NULL,
+ &setdebuglist,
+ &showdebuglist);
}
#ifdef FLUSH_INFERIOR_CACHE
Index: src/gdb/i386-nat.c
===================================================================
--- src.orig/gdb/i386-nat.c 2009-04-30 11:39:38.000000000 +0100
+++ src/gdb/i386-nat.c 2009-05-12 17:22:14.000000000 +0100
@@ -700,13 +700,17 @@ _initialize_i386_nat (void)
#ifdef I386_USE_GENERIC_WATCHPOINTS
/* A maintenance command to enable printing the internal DRi mirror
variables. */
- deprecated_add_set_cmd ("show-debug-regs", class_maintenance,
- var_boolean, (char *) &maint_show_dr, _("\
-Set whether to show variables that mirror the x86 debug registers.\n\
+ add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
+ &maint_show_dr, _("\
+Set whether to show variables that mirror the x86 debug registers."), _("\
+Show whether to show variables that mirror the x86 debug registers."), _("\
Use \"on\" to enable, \"off\" to disable.\n\
If enabled, the debug registers values are shown when GDB inserts\n\
or removes a hardware breakpoint or watchpoint, and when the inferior\n\
triggers a breakpoint or watchpoint."),
- &maintenancelist);
+ NULL,
+ NULL,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
#endif
}
Index: src/gdb/doc/gdb.texinfo
===================================================================
--- src.orig/gdb/doc/gdb.texinfo 2009-05-04 10:51:47.000000000 +0100
+++ src/gdb/doc/gdb.texinfo 2009-05-12 17:23:28.000000000 +0100
@@ -17817,6 +17817,11 @@ default is off.
@item show debug frame
Displays the current state of displaying @value{GDBN} frame debugging
info.
+@item set debug gnu-nat
+@cindex @sc{gnu}/Hurd debug messages
+Turns on or off debugging messages from the @sc{gnu}/Hurd debug support.
+@item show debug gnu-nat
+Show the current state of @sc{gnu}/Hurd debugging messages.
@item set debug infrun
@cindex inferior debugging info
Turns on or off display of @value{GDBN} debugging info for running the inferior.
@@ -25935,9 +25940,11 @@ data in a @file{gmon.out} file, be sure
Configuring with @samp{--enable-profiling} arranges for @value{GDBN} to be
compiled with the @samp{-pg} compiler option.
-@kindex maint show-debug-regs
+@kindex maint set show-debug-regs
+@kindex maint show show-debug-regs
@cindex hardware debug registers
-@item maint show-debug-regs
+@item maint set show-debug-regs
+@itemx maint show show-debug-regs
Control whether to show variables that mirror the hardware debug
registers. Use @code{ON} to enable, @code{OFF} to disable. If
enabled, the debug registers values are shown when @value{GDBN} inserts or
Index: src/gdb/mips-linux-nat.c
===================================================================
--- src.orig/gdb/mips-linux-nat.c 2009-05-12 17:35:13.000000000 +0100
+++ src/gdb/mips-linux-nat.c 2009-05-12 17:36:36.000000000 +0100
@@ -1044,15 +1044,18 @@ _initialize_mips_linux_nat (void)
{
struct target_ops *t;
- deprecated_add_set_cmd ("show-debug-regs", class_maintenance,
- var_boolean, (char *) &maint_show_dr, _("\
-Set whether to show variables that mirror the mips debug registers.\n\
+ add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
+ &maint_show_dr, _("\
+Set whether to show variables that mirror the mips debug registers."), _("\
+Show whether to show variables that mirror the mips debug registers."), _("\
Use \"on\" to enable, \"off\" to disable.\n\
If enabled, the debug registers values are shown when GDB inserts\n\
or removes a hardware breakpoint or watchpoint, and when the inferior\n\
triggers a breakpoint or watchpoint."),
- &maintenancelist);
-
+ NULL,
+ NULL,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
t = linux_trad_target (mips_linux_register_u_offset);
More information about the Gdb-patches
mailing list