[PATCH] Print vector registers in natural format, not hex
Klee Dienes
klee@mit.edu
Fri Oct 4 13:41:00 GMT 2002
The current GDB behavior for 'info reg' is the following:
Print all floating types in natural form, followed by "(raw
0xffffffff)". Print all other types in hex; for non-vector types,
additionally print the register in natural format. Unfortunately, this
behavior tends to maul floating point variables (they get truncated to
int, and then converted to hex), as well as make character data in
vector variables unpleasant to read.
The attached patch changes the algorithm so that all vector and float
registers are printed in natural format, followed by "(raw
0xffffffff)". I've attached samples of the output before and after the
patch; the behavior of GDB should be unchanged except for vector
variables. There's no effect on the results from running the testsuite
on powerpc-apple-darwin or i386-unknown-gnu-linux; it does require a
testsuite change to altivec-regs.exp on powerpc-unknown-gnu-linux.
(Really, I'd argue that all registers except integers should be printed
as natural followed by "(raw 0xffffffff)", rather than checking
explicitly for float/vector. But perhaps there are types I haven't
thought of, so I left that part of the behavior unchanged.)
Before:
(gdb) show architecture
The target architecture is set automatically (currently powerpc:common)
(gdb) info r1 f1 v1
r1 0xbffff6e0 3221223136
f1 0 (raw 0x0000000000000000)
v1 {
uint128 = 0x606162636465666740490fdb402df854,
v4_float = {0xffffffff, 0xffffffff, 0x3, 0x2},
v4_int32 = {0x60616263, 0x64656667, 0x40490fdb, 0x402df854},
v8_int16 = {0x6061, 0x6263, 0x6465, 0x6667, 0x4049, 0xfdb, 0x402d,
0xf854},
v16_int8 = {0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x40,
0x49, 0xf, 0xdb, 0x40, 0x2d, 0xf8, 0x54}
}
(gdb) show architecture
The target architecture is set automatically (currently i386)
(gdb) info reg xmm0
xmm0 {
v4_float = {0x2, 0x3, 0x1, 0x0},
v2_double = {0x32, 0x0},
v16_int8 = {0x54, 0xf8, 0x2d, 0x40, 0xdb, 0xf, 0x49, 0x40, 0x3b,
0xaa, 0xb8, 0x3f,
0x18, 0x72, 0x31, 0x3f},
v8_int16 = {0xf854, 0x402d, 0xfdb, 0x4049, 0xaa3b, 0x3fb8, 0x7218,
0x3f31},
v4_int32 = {0x402df854, 0x40490fdb, 0x3fb8aa3b, 0x3f317218},
v2_int64 = {0x40490fdb402df854, 0x3f3172183fb8aa3b},
uint128 = 0x3f3172183fb8aa3b40490fdb402df854
}
After:
(gdb) show architecture
The target architecture is set automatically (currently powerpc:common)
(gdb) info reg r1 f1 v1
r1 0xbffff6e0 3221223136
f1 0 (raw 0x0000000000000000)
v1 {
uint128 = 0x606162636465666740490fdb402df854,
v4_float = {6.49626082e+19, 1.6926733e+22, 3.14159274, 2.71828175},
v4_int32 = {1616994915, 1684366951, 1078530011, 1076754516},
v8_int16 = {24673, 25187, 25701, 26215, 16457, 4059, 16429, -1964},
v16_int8 = "`abcdefg@I\017°Z@-°ZT"
} (raw 0x606162636465666740490fdb402df854)
(gdb) show architecture
The target architecture is set automatically (currently i386)
(gdb) info reg xmm0
xmm0 {
v4_float = {2.71828175, 3.14159274, 1.44269502, 0.693147182},
v2_double = {50.12387850041037, 0.00026619998945657018},
v16_int8 = "T╴-@╴\017I@;╴╴?\030r1?",
v8_int16 = {-1964, 16429, 4059, 16457, -21957, 16312, 29208, 16177},
v4_int32 = {1076754516, 1078530011, 1069066811, 1060205080},
v2_int64 = {4632251126076274772, 4553546146722130491},
uint128 = 0x3f3172183fb8aa3b40490fdb402df854
} (raw 0x3f3172183fb8aa3b40490fdb402df854)
The patch:
2002-10-04 Klee Dienes <kdienes@apple.com>
* infcmd.c (default_print_registers_info): Print vectors and
floats in 'natural' form, followed by the raw contents of the
register. Print other types in hex, followed by their natural
form.
2004-10-04 Klee Dienes <kdienes@apple.com>
* gdb.arch/altivec-regs.exp: Info reg now prints in natural, not
hex, format.
Index: infcmd.c
===================================================================
RCS file: /cvs/src/src/gdb/infcmd.c,v
retrieving revision 1.57
diff -u -r1.57 infcmd.c
--- infcmd.c 3 Oct 2002 02:34:07 -0000 1.57
+++ infcmd.c 4 Oct 2002 20:22:48 -0000
@@ -1628,9 +1628,13 @@
REGISTER_VIRTUAL_SIZE (i));
}
- /* If virtual format is floating, print it that way, and in raw
- hex. */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+ /* For floating and vector registers, print the value in natural
+ format, followed by the contents of the register in hex. For
+ all other registers, print the contents of the register in
+ hex, followed by the natural (typically integer) value. */
+
+ if ((TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+ || TYPE_VECTOR (REGISTER_VIRTUAL_TYPE (i)))
{
int j;
@@ -1654,14 +1658,10 @@
/* Print the register in hex. */
val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
file, 'x', 1, 0, Val_pretty_default);
- /* If not a vector register, print it also according to its
- natural format. */
- if (TYPE_VECTOR (REGISTER_VIRTUAL_TYPE (i)) == 0)
- {
- fprintf_filtered (file, "\t");
- val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0,
0,
- file, 0, 1, 0, Val_pretty_default);
- }
+ /* Also print it according to its natural format. */
+ fprintf_filtered (file, "\t");
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ file, 0, 1, 0, Val_pretty_default);
}
/* The SPARC wants to print even-numbered float regs as doubles
Index: altivec-regs.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.arch/altivec-regs.exp,v
retrieving revision 1.1
diff -u -r1.1 altivec-regs.exp
--- altivec-regs.exp 14 May 2002 22:02:52 -0000 1.1
+++ altivec-regs.exp 4 Oct 2002 20:35:17 -0000
@@ -88,13 +88,19 @@
# b) the register read (below) also works.
if {$endianness == "big"} {
-set vector_register ".uint128 = 0x00000001000000010000000100000001,
v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1.,
v8_int16 = .0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1., v16_int8 = .0x0,
0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0,
0x1.."
+set hex_vector ".uint128 = 0x00000001000000010000000100000001,
v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1.,
v8_int16 = .0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1., v16_int8 = .0x0,
0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0,
0x1.."
} else {
-set vector_register ".uint128 = 0x00000001000000010000000100000001,
v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1.,
v8_int16 = .0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0., v16_int8 = .0x1,
0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0,
0x0.."
+set hex_vector ".uint128 = 0x00000001000000010000000100000001,
v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1.,
v8_int16 = .0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0., v16_int8 = .0x1,
0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0,
0x0.."
+}
+
+if {$endianness == "big"} {
+ set decimal_vector ".uint128 =
0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45,
1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .0, 1, 0, 1, 0,
1, 0, 1., v16_int8 = ..0.0.0.001.0.0.0.001.0.0.0.001.0.0.0.001.."
+} else {
+ set decimal_vector ".uint128 =
0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45,
1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .1, 0, 1, 0, 1,
0, 1, 0., v16_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.."
}
for {set i 0} {$i < 32} {incr i 1} {
- gdb_test "info reg vr$i" "vr$i.*$vector_register" "info reg
vr$i"
+ gdb_test "info reg vr$i" "vr$i.*$decimal_vector" "info reg
vr$i"
}
gdb_test "info reg vrsave" "vrsave.*0x1" "info reg vrsave"
@@ -106,14 +112,9 @@
# null char in a string and doesn't print it. This is not a failure,
but
# the way gdb works.
-if {$endianness == "big"} {
- set decimal_vector ".uint128 =
0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45,
1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .0, 1, 0, 1, 0,
1, 0, 1., v16_int8 = ..0.0.0.001.0.0.0.001.0.0.0.001.0.0.0.001.."
-} else {
- set decimal_vector ".uint128 =
0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45,
1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .1, 0, 1, 0, 1,
0, 1, 0., v16_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.."
-}
-
for {set i 0} {$i < 32} {incr i 1} {
gdb_test "print \$vr$i" ".* = $decimal_vector" "print vr$i"
+ gdb_test "print /x \$vr$i" ".* = $hex_decimal_vector" "print
vr$i"
}
gdb_test "print \$vrsave" ".* = 1" "print vrsave"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 9241 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/gdb-patches/attachments/20021004/104d6b6d/attachment.bin>
More information about the Gdb-patches
mailing list