[PATCH] printcmds.exp: escape curly braces in array print pattern match
Fernando Nasser
fnasser@cygnus.com
Mon Nov 13 18:39:00 GMT 2000
This patch has been committed to the repository.
Fernando
Orjan Friberg wrote:
>
> Fernando Nasser wrote:
> >
> > Michael Snyder wrote:
> > >
> > > Orjan Friberg wrote:
> > > >
> > > > The following patch fixes a problem with matching output from printing
> > > > arrays in printcmds.exp. A left curly brace '{' followed by a number
> > > > must be escaped, to avoid it being interpreted as the beginning of a
> > > > bound. I escape it with \\. A right curly brace '}' does not seem to
> > > > have any special meaning unless preceded by '{', but for consistency I
> > > > escaped those as well (to indicate that it's not part of a bound).
> > > > However, it does clutter the exp-file, so it might not be the best way
> > > > to do it. I'm awaiting comments before submitting the corresponding
> > > > patch for setvar.exp.
> > >
> > > Verified that it does not cause any additional fails on Solaris.
> > > I would recommend accepting the patch (though I don't know if
> > > there is a preferable way of doing it).
> > >
> > > Stan? Fernando?
> > >
> >
> > Writing a little wrapper proc will do the trick, i.e. let the test pattern clear
> > and yet fixing the matching problem.
> >
> > proc gdb_test_escape_braces {pattern args} {
> > <escape the braces in pattern yelding esc_pattern>
> > <call gdb_test with the esc_pattern created above>
> > }
>
> Here is a revised patch that I believe follows Fernando's suggestion. It
> may not be optimal, being my first attempt at TCL scripting. Only left
> curly braces followed by a number are escaped this time. I tried using
> gdb_test_exact which calls string_to_regexp, but that does not work
> since string_to_regexp does not escape braces. I will make a
> corresponding patch for setvar.exp if this patch is accepted.
>
> 2000-10-01 Orjan Friberg <orjanf@axis.com>
>
> * gdb.base/printcmds.exp: Escape curly braces followed by a number
> in array print pattern match.
>
> ***
> /home/orjanf/gdb-5.0-latest/src/gdb/testsuite/gdb.base/printcmds.exp
> Tue Mar 14 18:01:05 2000
> --- printcmds.exp Mon Oct 2 15:31:21 2000
> *************** proc test_print_int_arrays {} {
> *** 542,554 ****
>
> gdb_test "set print elements 24" ""
>
> ! gdb_test "p int1dim" \
> " = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}"
> ! gdb_test "p int2dim" \
> " = {{0, 1, 2, 3}, {4, 5, 6, 7}, {8, 9, 10, 11}}"
> ! gdb_test "p int3dim" \
> " = {{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}"
> ! gdb_test "p int4dim" \
> " = {{{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}}"
> }
>
> --- 542,554 ----
>
> gdb_test "set print elements 24" ""
>
> ! gdb_test_escape_braces "p int1dim" \
> " = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}"
> ! gdb_test_escape_braces "p int2dim" \
> " = {{0, 1, 2, 3}, {4, 5, 6, 7}, {8, 9, 10, 11}}"
> ! gdb_test_escape_braces "p int3dim" \
> " = {{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}"
> ! gdb_test_escape_braces "p int4dim" \
> " = {{{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}}"
> }
>
> *************** proc test_print_typedef_arrays {} {
> *** 557,563 ****
>
> gdb_test "set print elements 24" ""
>
> ! gdb_test "p a1" \
> " = {2, 4, 6, 8, 10, 12, 14, 16, 18, 20}"
> gdb_test "p a1\[0\]" " = 2"
> gdb_test "p a1\[9\]" " = 20"
> --- 557,563 ----
>
> gdb_test "set print elements 24" ""
>
> ! gdb_test_escape_braces "p a1" \
> " = {2, 4, 6, 8, 10, 12, 14, 16, 18, 20}"
> gdb_test "p a1\[0\]" " = 2"
> gdb_test "p a1\[9\]" " = 20"
> *************** proc test_print_typedef_arrays {} {
> *** 570,580 ****
>
> proc test_artificial_arrays {} {
> # Send \026@ instead of just @ in case the kill character is @.
> ! gdb_test "p int1dim\[0\]\026@2" " = {0, 1}" {p int1dim[0]@2}
> ! gdb_test "p int1dim\[0\]\026@2\026@3" \
> "({{0, 1}, {2, 3}, {4, 5}}|\[Cc\]annot.*)" \
> {p int1dim[0]@2@3}
> ! gdb_test {p/x (short [])0x12345678} \
> " = ({0x1234, 0x5678}|{0x5678, 0x1234})"
> }
>
> --- 570,580 ----
>
> proc test_artificial_arrays {} {
> # Send \026@ instead of just @ in case the kill character is @.
> ! gdb_test_escape_braces "p int1dim\[0\]\026@2" " = {0, 1}" {p
> int1dim[0]@2}
> ! gdb_test_escape_braces "p int1dim\[0\]\026@2\026@3" \
> "({{0, 1}, {2, 3}, {4, 5}}|\[Cc\]annot.*)" \
> {p int1dim[0]@2@3}
> ! gdb_test_escape_braces {p/x (short [])0x12345678} \
> " = ({0x1234, 0x5678}|{0x5678, 0x1234})"
> }
>
> *************** proc test_print_array_constants {} {
> *** 655,665 ****
> setup_xfail "a29k-*-udi" 2416
> gdb_test "print {'a','b','c'}" " = \"abc\""
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test "print {0,1,2}" " = {0, 1, 2}"
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test "print {(long)0,(long)1,(long)2}" " = {0, 1, 2}"
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test "print {{0,1,2},{3,4,5}}" " = {{0, 1, 2}, {3, 4, 5}}"
> setup_xfail "a29k-*-udi" 2416
> gdb_test "print {4,5,6}\[2\]" " = 6"
> setup_xfail "a29k-*-udi" 2416
> --- 655,665 ----
> setup_xfail "a29k-*-udi" 2416
> gdb_test "print {'a','b','c'}" " = \"abc\""
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test_escape_braces "print {0,1,2}" " = {0, 1, 2}"
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test_escape_braces "print {(long)0,(long)1,(long)2}" " = {0,
> 1, 2}"
> setup_xfail "a29k-*-udi" 2416
> ! gdb_test_escape_braces "print {{0,1,2},{3,4,5}}" " = {{0, 1, 2},
> {3, 4, 5
> }}"
> setup_xfail "a29k-*-udi" 2416
> gdb_test "print {4,5,6}\[2\]" " = 6"
> setup_xfail "a29k-*-udi" 2416
> *************** proc test_printf {} {
> *** 678,683 ****
> --- 678,692 ----
> gdb_test "printf \"x=%d,y=%f,z=%d\\n\", 5, 6.0, 7"
> "x=5,y=6\.0+,z=7"
> gdb_test "printf \"%x %f, %c %x, %x, %f\\n\", 0xbad, -99.541,
> 'z',\
> 0xfeedface, 0xdeadbeef, 5.0" "bad -99.54\[0-9\]+, z feedface,
> deadbeef, 5.0+"
> + }
> +
> + # Escape a left curly brace to prevent it from being interpreted as
> + # the beginning of a bound
> + proc gdb_test_escape_braces { args } {
> +
> + set pattern [lindex $args 1]
> + regsub -all {\{[0-9]} $pattern {\\&} esc_pattern
> + gdb_test [lindex $args 0] $esc_pattern [lindex $args 2]
> }
>
> # Start with a fresh gdb.
>
> --
> Orjan Friberg E-mail: orjan.friberg@axis.com
> Axis Communications AB Phone: +46 46 272 17 68
--
Fernando Nasser
Red Hat Canada Ltd. E-Mail: fnasser@redhat.com
2323 Yonge Street, Suite #300
Toronto, Ontario M4P 2C9
More information about the Gdb-patches
mailing list