[rfa/5] add PDF target to doc directory

Andrew Cagney ac131313@cygnus.com
Sun May 28 21:13:00 GMT 2000


Andrew Cagney wrote:

> Hmm,
> 
> Attatched is a revision that uses PDFTEX.  Poking around some more
> turned up PDFTEX and its output is about half the size of ps2pdf!
> Now if only there was a PDF tool that added links (like html/info) and
> put the chapter in the correct place.
> 
>         Andrew

Attatched is the third attempt.  This time it:

	o	imports texinfo.tex from
		makeinfo 4.0

	o	duplicates the @chapter

	o	uses pdftex

Ok?  I left out the diff to texinfo.tex - it is huge.  I guess the
question is, is this (specifically the texinfo.tex update) ok with the
doco maintainers as a change to the 5.0 branch?

	Andrew
Index: ChangeLog
Mon May 29 13:50:03 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* texinfo/texinfo.tex: Update. Version from makeinfo 4.0.

ndex: gdb/doc/ChangeLog
Fri May 26 15:55:33 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* Makefile.in (pdf, gdbint.pdf, gdb.pdf, stabs.pdf): New targets.
  	Generate using pdftex.
	(PDFTEX): Define.
 	(STAGESTUFF, maintainer-clean realclean): Add *.pdf.
	(gdb.texinfo, gdbint.texinfo, stabs.texinfo): When TeX insert the
 	@contents at the start.

Index: gdb/doc/Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/doc/Makefile.in,v
retrieving revision 1.4.2.4
diff -p -r1.4.2.4 Makefile.in
*** Makefile.in	2000/05/24 02:06:34	1.4.2.4
--- Makefile.in	2000/05/29 03:53:10
*************** TEXINDEX = texindex
*** 92,97 ****
--- 92,100 ----
  # Program to generate Postscript files from DVI files.
  DVIPS = dvips
  
+ # Program to generate PDF files from tex files.
+ PDFTEX = pdftex
+ 
  # Main GDB manual's source files
  SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/annotate.texi
  
*************** info: gdb.info gdbint.info stabs.info
*** 109,115 ****
  dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
  ps: gdb.ps gdbint.ps stabs.ps refcard.ps
  html: gdb_toc.html gdbint_toc.html stabs_toc.html
! all-doc: info dvi ps
  diststuff: info
  
  install-info: info
--- 112,119 ----
  dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
  ps: gdb.ps gdbint.ps stabs.ps refcard.ps
  html: gdb_toc.html gdbint_toc.html stabs_toc.html
! pdf: gdb.pdf gdbint.pdf stabs.pdf
! all-doc: info dvi ps # pdf
  diststuff: info
  
  install-info: info
*************** install-html: html
*** 130,136 ****
  		$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
  	done
  
! STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
  
  # Copy the object files from a particular stage into a subdirectory.
  stage1: force
--- 134,140 ----
  		$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
  	done
  
! STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
  
  # Copy the object files from a particular stage into a subdirectory.
  stage1: force
*************** distclean: clean
*** 181,187 ****
  # "clean" or "distclean".  Use maintainer-clean to remove them.
  
  maintainer-clean realclean: distclean
! 	rm -f GDBvn.texi *.info* *.dvi *.ps *.html
  
  # GDB QUICK REFERENCE (dvi output)
  refcard.dvi : refcard.tex $(REFEDITS)
--- 185,191 ----
  # "clean" or "distclean".  Use maintainer-clean to remove them.
  
  maintainer-clean realclean: distclean
! 	rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
  
  # GDB QUICK REFERENCE (dvi output)
  refcard.dvi : refcard.tex $(REFEDITS)
*************** gdb.dvi: ${SFILES_DOC}
*** 243,248 ****
--- 247,264 ----
  gdb.ps: gdb.dvi
  	$(DVIPS) -o $@ $?
  
+ gdb.pdf: ${SFILES_DOC}
+ 	if [ ! -f ./GDBvn.texi ]; then \
+ 		(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
+ 		ln $(srcdir)/GDBvn.texi . || \
+ 		cp $(srcdir)/GDBvn.texi . ; else true; fi
+ 	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
+ 	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
+ 	$(TEXINDEX) gdb.??
+ 	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
+ 	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
+ 		gdb.tp* gdb.vr*
+ 
  # GDB MANUAL: info file
  # We're using texinfo 3.12; older makeinfo's may not be able to
  # cope with all the markup.  
*************** gdbint.dvi : gdbint.texinfo
*** 370,375 ****
--- 386,398 ----
  gdbint.ps : gdbint.dvi
  	$(DVIPS) -o $@ $?
  
+ gdbint.pdf: gdbint.dvi
+ 	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
+ 	$(TEXINDEX) gdbint.??
+ 	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
+ 	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
+ 		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
+ 
  # GDB INTERNALS MANUAL: info file
  
  gdbint.info: gdbint.texinfo
*************** stabs.dvi : stabs.texinfo
*** 398,403 ****
--- 421,433 ----
  
  stabs.ps: stabs.dvi
  	$(DVIPS) -o $@ $?
+ 
+ stabs.pdf: stabs.dvi
+ 	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
+ 	$(TEXINDEX) stabs.??
+ 	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
+ 	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
+ 		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
  
  force:
  
Index: gdb/doc/gdb.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
retrieving revision 1.13.2.9
diff -p -r1.13.2.9 gdb.texinfo
*** gdb.texinfo	2000/05/24 16:17:06	1.13.2.9
--- gdb.texinfo	2000/05/29 03:53:58
*************** Copyright (C) 1988-2000 Free Software Fo
*** 206,211 ****
--- 206,216 ----
  
  @end ifhtml
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @iftex
+ @contents
+ @end iftex
+ 
  @node Summary
  @unnumbered Summary of @value{GDBN}
  
*************** needed for special purposes only.
*** 12863,12867 ****
--- 12868,12879 ----
  % Blame: doc@cygnus.com, 1991.
  @end tex
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @ifinfo
+ @contents
+ @end ifinfo
+ @ifhtml
  @contents
+ @end ifhtml
+ 
  @bye
Index: gdb/doc/gdbint.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdbint.texinfo,v
retrieving revision 1.5.2.1
diff -p -r1.5.2.1 gdbint.texinfo
*** gdbint.texinfo	2000/04/12 05:16:56	1.5.2.1
--- gdbint.texinfo	2000/05/29 03:54:10
*************** are preserved on all copies.
*** 63,68 ****
--- 63,73 ----
  
  @end titlepage
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @iftex
+ @contents
+ @end iftex
+ 
  @node Top
  @c Perhaps this should be the title of the document (but only for info,
  @c not for TeX).  Existing GNU manuals seem inconsistent on this point.
*************** pyr-xdep.c
*** 3171,3177 ****
  exec.c
  
  @end table
- 
  
  @contents
  @bye
--- 3176,3188 ----
  exec.c
  
  @end table
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @ifinfo
  @contents
+ @end ifinfo
+ @ifhtml
+ @contents
+ @end ifhtml
+ 
  @bye
Index: gdb/doc/stabs.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/stabs.texinfo,v
retrieving revision 1.1.1.3
diff -p -r1.1.1.3 stabs.texinfo
*** stabs.texinfo	1999/06/28 16:02:18	1.1.1.3
--- stabs.texinfo	2000/05/29 03:54:25
*************** This document describes the stabs debugg
*** 86,91 ****
--- 86,95 ----
  @end menu
  @end ifinfo
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @iftex
+ @contents
+ @end iftex
  
  @node Overview
  @chapter Overview of Stabs
*************** However, no one has yet designed or impl
*** 4015,4019 ****
--- 4019,4030 ----
  
  @printindex fn
  
+ @c TeX can handle the contents at the start but makeinfo 3.12 can not
+ @ifinfo
  @contents
+ @end ifinfo
+ @ifhtml
+ @contents
+ @end ifhtml
+ 
  @bye


More information about the Gdb-patches mailing list