[binutils-gdb] sim: rx: replace cycle-stats with common profile settings

Michael Frysinger vapier@sourceware.org
Sun Jun 13 02:29:54 GMT 2021


https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=a687671327dd2eb4d715745cce04a8f1c96e1fc1

commit a687671327dd2eb4d715745cce04a8f1c96e1fc1
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Sat Jun 12 12:01:27 2021 -0400

    sim: rx: replace cycle-stats with common profile settings
    
    The common sim-profile option controls whether to keep track of
    runtime execution (like cycle count), so switch the rx-specific
    cycle-stats option over to that.

Diff:
---
 sim/rx/ChangeLog    |  8 ++++++++
 sim/rx/README.txt   |  4 ++--
 sim/rx/config.in    |  3 ---
 sim/rx/configure    | 26 ++------------------------
 sim/rx/configure.ac | 17 -----------------
 sim/rx/mem.c        |  2 +-
 sim/rx/rx.c         | 32 ++++++++++++++++----------------
 7 files changed, 29 insertions(+), 63 deletions(-)

diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog
index c358f7c1fe0..a368dc4bf6c 100644
--- a/sim/rx/ChangeLog
+++ b/sim/rx/ChangeLog
@@ -1,3 +1,11 @@
+2021-06-12  Mike Frysinger  <vapier@gentoo.org>
+
+	* README.txt: Change cycle-stats to sim-profile.
+	* configure.ac: Delete cycle-stats.
+	* mem.c: Change CYCLE_STATS to WITH_PROFILE
+	* rx.c: Likewise.
+	* config.in, configure: Regenerate.
+
 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 
 	* aclocal.m4, config.in, configure: Regenerate.
diff --git a/sim/rx/README.txt b/sim/rx/README.txt
index 496e6a19fb1..5ebd5742083 100644
--- a/sim/rx/README.txt
+++ b/sim/rx/README.txt
@@ -7,8 +7,8 @@ If enabled, the simulator will keep track of how many cycles each
 instruction takes.  While not 100% accurate, it is very close,
 including modelling fetch stalls and register latency.
 
---enable-cycle-stats  (default)
---disable-cycle-stats
+--enable-sim-profile  (default)
+--disable-sim-profile
 
 If enabled, specifying "-v" twice on the simulator command line causes
 the simulator to print statistics on how much time was used by each
diff --git a/sim/rx/config.in b/sim/rx/config.in
index 583732fa026..fd650fd41c0 100644
--- a/sim/rx/config.in
+++ b/sim/rx/config.in
@@ -6,9 +6,6 @@
 /* --enable-cycle-accurate */
 #undef CYCLE_ACCURATE
 
-/* --enable-cycle-stats */
-#undef CYCLE_STATS
-
 /* Define to 1 if translation of program messages to the user's native
    language is requested. */
 #undef ENABLE_NLS
diff --git a/sim/rx/configure b/sim/rx/configure
index bbf75ae6139..6700fb0595e 100755
--- a/sim/rx/configure
+++ b/sim/rx/configure
@@ -769,7 +769,6 @@ enable_libtool_lock
 enable_maintainer_mode
 enable_sim_inline
 enable_cycle_accurate
-enable_cycle_stats
 enable_werror
 enable_build_warnings
 enable_sim_build_warnings
@@ -1414,7 +1413,6 @@ Optional Features:
                           Specify which functions should be inlined
   --disable-cycle-accurate
                           Disable cycle accurate simulation (faster runtime)
-  --disable-cycle-stats   Disable cycle statistics (faster runtime)
   --enable-werror         treat compile warnings as errors
   --enable-build-warnings enable build-time compiler warnings if gcc is used
   --enable-sim-build-warnings
@@ -10746,7 +10744,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10749 "configure"
+#line 10747 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10852,7 +10850,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10855 "configure"
+#line 10853 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11158,32 +11156,12 @@ esac
 fi
 
 
-# Check whether --enable-cycle-stats was given.
-if test "${enable_cycle_stats+set}" = set; then :
-  enableval=$enable_cycle_stats; case "${enableval}" in
-yes | no) ;;
-*)	as_fn_error $? "bad value ${enableval} given for --enable-cycle-stats option" "$LINENO" 5 ;;
-esac
-fi
-
-
 echo enable_cycle_accurate is $enable_cycle_accurate
-echo enable_cycle_stats is $enable_cycle_stats
 
 if test "x${enable_cycle_accurate}" != xno; then
 
 $as_echo "#define CYCLE_ACCURATE 1" >>confdefs.h
 
-
-  if test "x${enable_cycle_stats}" != xno; then
-
-$as_echo "#define CYCLE_STATS 1" >>confdefs.h
-
-  fi
-else
-  if test "x${enable_cycle_stats}" != xno; then
-    as_fn_error $? "cycle-stats not available without cycle-accurate" "$LINENO" 5
-  fi
 fi
 
 
diff --git a/sim/rx/configure.ac b/sim/rx/configure.ac
index 5d1076834c1..b2725fea797 100644
--- a/sim/rx/configure.ac
+++ b/sim/rx/configure.ac
@@ -31,27 +31,10 @@ yes | no) ;;
 *)	AC_MSG_ERROR(bad value ${enableval} given for --enable-cycle-accurate option) ;;
 esac])
 
-AC_ARG_ENABLE(cycle-stats,
-[AS_HELP_STRING([--disable-cycle-stats],
-		[Disable cycle statistics (faster runtime)])],
-[case "${enableval}" in
-yes | no) ;;
-*)	AC_MSG_ERROR(bad value ${enableval} given for --enable-cycle-stats option) ;;
-esac])
-
 echo enable_cycle_accurate is $enable_cycle_accurate
-echo enable_cycle_stats is $enable_cycle_stats
 
 if test "x${enable_cycle_accurate}" != xno; then
   AC_DEFINE([CYCLE_ACCURATE], 1, [--enable-cycle-accurate])
-
-  if test "x${enable_cycle_stats}" != xno; then
-    AC_DEFINE([CYCLE_STATS], 1, [--enable-cycle-stats])
-  fi
-else
-  if test "x${enable_cycle_stats}" != xno; then
-    AC_ERROR([cycle-stats not available without cycle-accurate])
-  fi
 fi
 
 SIM_AC_OUTPUT
diff --git a/sim/rx/mem.c b/sim/rx/mem.c
index f9b9cc1a97e..1cbd3587cf7 100644
--- a/sim/rx/mem.c
+++ b/sim/rx/mem.c
@@ -317,7 +317,7 @@ mem_put_byte (unsigned int address, unsigned char value)
       }
       break;
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
     case 0x0008c02b: /* PB.DR */
       {
 	if (value == 0)
diff --git a/sim/rx/rx.c b/sim/rx/rx.c
index 869dd3aa89c..666122792f5 100644
--- a/sim/rx/rx.c
+++ b/sim/rx/rx.c
@@ -35,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 #include "err.h"
 #include "misc.h"
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 static const char * id_names[] = {
   "RXO_unknown",
   "RXO_mov",	/* d = s (signed) */
@@ -213,7 +213,7 @@ static int po0;
 
 #else
 #define STATS(x)
-#endif /* CYCLE_STATS */
+#endif /* WITH_PROFILE */
 
 
 #ifdef CYCLE_ACCURATE
@@ -424,7 +424,7 @@ get_op (const RX_Opcode_Decoded *rd, int i)
       if (regs.m2m == M2M_BOTH)
 	{
 	  tprintf("src memory stall\n");
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  memory_stalls ++;
 #endif
 	  regs.cycle_count ++;
@@ -594,7 +594,7 @@ put_op (const RX_Opcode_Decoded *rd, int i, int v)
 	{
 	  tprintf("dst memory stall\n");
 	  regs.cycle_count ++;
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  memory_stalls ++;
 #endif
 	  regs.m2m = 0;
@@ -943,14 +943,14 @@ decode_opcode (void)
   unsigned long opcode_pc;
   RX_Data rx_data;
   const RX_Opcode_Decoded *opcode;
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   unsigned long long prev_cycle_count;
 #endif
 #ifdef CYCLE_ACCURATE
   unsigned int tx;
 #endif
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   prev_cycle_count = regs.cycle_count;
 #endif
 
@@ -988,7 +988,7 @@ decode_opcode (void)
 	{
 	  tprintf("1 cycle branch alignment penalty\n");
 	  cycles (branch_alignment_penalty);
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  branch_alignment_stalls ++;
 #endif
 	}
@@ -1087,7 +1087,7 @@ decode_opcode (void)
 	      cycles (3);
 	      branch_alignment_penalty = 1;
 	    }
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  branch_stalls ++;
 #endif
 #endif
@@ -1116,7 +1116,7 @@ decode_opcode (void)
 	      cycles (3);
 	      branch_alignment_penalty = 1;
 	    }
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  branch_stalls ++;
 #endif
 #endif
@@ -1754,7 +1754,7 @@ decode_opcode (void)
 	/* Note: specs say 5, chip says 3.  */
 	if (regs.fast_return && regs.link_register == regs.r_pc)
 	  {
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	    fast_returns ++;
 #endif
 	    tprintf("fast return bonus\n");
@@ -1796,7 +1796,7 @@ decode_opcode (void)
       if (regs.fast_return && regs.link_register == regs.r_pc)
 	{
 	  tprintf("fast return bonus\n");
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 	  fast_returns ++;
 #endif
 	  cycles (tx < 3 ? 3 : tx + 1);
@@ -2172,7 +2172,7 @@ decode_opcode (void)
   new_rt = -1;
 #endif
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   if (prev_cycle_count == regs.cycle_count)
     {
       printf("Cycle count not updated! id %s\n", id_names[opcode->id]);
@@ -2180,7 +2180,7 @@ decode_opcode (void)
     }
 #endif
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   if (running_benchmark)
     {
       int omap = op_lookup (opcode->op[0].type, opcode->op[1].type, opcode->op[2].type);
@@ -2199,7 +2199,7 @@ decode_opcode (void)
   return RX_MAKE_STEPPED ();
 }
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
 void
 reset_pipeline_stats (void)
 {
@@ -2227,7 +2227,7 @@ halt_pipeline_stats (void)
 void
 pipeline_stats (void)
 {
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   int i, o1;
   int p, p1;
 #endif
@@ -2242,7 +2242,7 @@ pipeline_stats (void)
   printf ("cycles: %13s\n", comma (regs.cycle_count));
 #endif
 
-#ifdef CYCLE_STATS
+#ifdef WITH_PROFILE
   if (benchmark_start_cycle)
     printf ("bmark:  %13s\n", comma (benchmark_end_cycle - benchmark_start_cycle));


More information about the Gdb-cvs mailing list