Support for snmp dot3 mib in ks32c5000 ethernet driver

[Roland Caßebohm]

2003-10-09  Roland Cassebohm  <roland.cassebohm@visionsystems.de>

        * src/ks5000_ether.c: Set ifStats.description only one time while
        initialization, it will never change.
        Set ifStats.supports_dot3 to 1, to support snmp mib dot3.
        Set ifStats.snmp_chipset to be interpreted as "nullobjid" in the
        snmp dot3 agent. It is not a string it is an oid as byte array.
        The link status of the phy are read while initializion and in the
        command ETH_DRV_GET_IF_STATS to be up to date without phy interrupt
        support.
        Change firstTime in installInterrupts() to be static to be sure
        interrupts will only one time be installed.

Roland
-- 

___________________________________________________

VS Vision Systems GmbH, Industrial Image Processing
Dipl.-Ing. Roland Caßebohm
Aspelohe 27A, D-22848 Norderstedt, Germany
http://www.visionsystems.de
___________________________________________________
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eth_ks32c5000.diff
Type: text/x-diff
Size: 5422 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/ecos-patches/attachments/20031009/5bded77d/attachment.bin>