[ECOS] Re: Input from debug console
Grant Edwards
grant.b.edwards@gmail.com
Thu Jun 30 17:52:00 GMT 2016
On 2016-06-30, Michael W. Ellis <mellis@pesa.com> wrote:
>> -----Original Message-----
>> From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-
>> owner@ecos.sourceware.org] On Behalf Of Michael W. Ellis
>> Sent: Thursday, June 30, 2016 9:54 AM
>> To: ecos-discuss@ecos.sourceware.org
>> Subject: [ECOS] Input from debug console
>>
>> My application calls diag_printf() to display information to the debug
>> console using serial port 0 of my processor. I would like to be able
>> to implement some simple diagnostics that are initiated through the
>> console port. Is it possible to accept input from the console? If
> so,
>> how is this done?
>
> Correction - I'm using the AT91SAM9260 processor and the debug console
> uses a serial port connected to the Debug Unit instead of serial port 0.
> The console device name is "/dev/ttydiag". Without writing new drivers,
> is it possible to get simple input from this port?
Does your eCos HAL profide hal_if_diag_read_char()? I thought that
was pretty standard. I modified my HAL to also provide a non-blocking
version of that call -- it only required writing a few lines of code.
--
Grant
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list