[ECOS] web simple monitor (httpd) compiling error

Sergei Gavrikov sergei.gavrikov@gmail.com
Mon Mar 5 07:39:00 GMT 2012

On Sun, 4 Mar 2012, beacon88 wrote:

> i tested using the gdb and here ae the output.
> (gdb) load
> Loading section .rom_vectors, size 0x40 lma 0x81010000
> Loading section .text, size 0x41664 lma 0x81010040
> Loading section .rodata, size 0x318c lma 0x810516a4
> Loading section .data, size 0x1a14 lma 0x81054830
> Start address 0x81010040, load size 287300
> Transfer rate: 922 bytes/sec, 764 bytes/write.
> (gdb) run
> The "remote" target does not support "run".  Try "help target" or
> "continue".
> (gdb) continue
> Continuing.
> [cyg_net_init] Init: mbinit(0x00000000)
> [cyg_net_init] Init: cyg_net_init_devs(0x00000000)
> Init device 'dm9000_eth0'
> [cyg_net_init] Init: loopattach(0x00000000)
> [cyg_net_init] Init: ifinit(0x00000000)
> [cyg_net_init] Init: domaininit(0x00000000)
> [cyg_net_init] Init: cyg_net_add_domain(0x81055e90)
> New domain internet at 0x00000000
> [cyg_net_init] Init: cyg_net_add_domain(0x810556ac)
> New domain route at 0x00000000
> [cyg_net_init] Init: call_route_init(0x00000000)
> [cyg_net_init] Done
> PASS:<httpd test finished>
> EXIT:<done>
> i'm a beginner into this field. but i can't open the webpage at
> i'm not quite understand. can you
> explain it to me? your help is really appreciated and thank you very
> much. 

Test life (= server life) is approx 1 minute, refer to httpd1.c source,
but the above looks like your network is not configured properly.

As your target has 1 NIC you have to set a static IP address for RedBoot
and setup  BOOTP/DHCP server on your test network (it is recommended way
to run eCos tests on "1-NIC" hardware). But first you have to pass a
couple of tests with RedBoot (you have to be able ping to/from the
target, telnet to the target, etc.)

About network setup refer to these sections (clue only)


But before I would suggest you to begin from this scratch



Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

More information about the Ecos-discuss mailing list