[ECOS] Define Flash partition for WinCE storage
Gary Thomas
gary@mlbassoc.com
Tue Mar 16 11:59:00 GMT 2010
On 03/16/2010 05:55 AM, Stefano Mora wrote:
> Hi all,
> I have a board with RedBoot + WinCE.
What kind of a board is this?
> I defined a Flash partition for wince and a 64MB partition for storage.
> WinCE mounts correctly the 64MB storage partition.
>
> RedBoot> fis list
> Name FLASH addr Mem addr Length Entry point
> RedBoot 0x00000000 0x00000000 0x00040000 0x00000000
> wince 0x00040000 0x80100000 0x01F00000 0xFFFFFFFF
> storage 0x01F40000 0x82000000 0x04000000 0xFFFFFFFF
> FIS directory 0x07F60000 0x07F60000 0x0001F000 0x00000000
> RedBoot config 0x07F7F000 0x07F7F000 0x00001000 0x00000000
> RedBoot>
>
> How can i define a 1GB Storage size?
You'd have to have a 1GB device on your hardware platform - do you?
> Do I need to define a RAM (Mem addr) size with the same size of the storage area?? I have not so much RAM !?!?!
No these are not related. The 'Mem addr' is simply the RAM address
that RedBoot will load an image into by default (when the -b option
is not used with 'fis load')
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list