[ECOS] R: [ECOS] Problem flashing WinCE

Stefano Mora smora@eos.pr.it
Mon Mar 15 16:27:00 GMT 2010


Hello L D,
This is my tests:

RedBoot>
RedBoot> lo -r -b 0x0 nk.nb0
Using default protocol (TFTP)
Specified address (0x00000000) is not believed to be in RAM - continue (y/n)? n
RedBoot>
RedBoot> lo -r -b 0x180000 -h 192.168.0.12 nk.nb0
Using default protocol (TFTP)
Raw file loaded 0x00180000-0x0217ffff, assumed entry at 0x00180000
RedBoot>
RedBoot> goü

I guess there is some mistakes in the building phase.
Which options did you use to compile your image?

Thanks
________________________________

Ing. Stefano Mora


> -----Messaggio originale-----
> Da: L D [mailto:embedpro@gmail.com]
> Inviato: venerdì 12 marzo 2010 20:35
> A: Stefano Mora
> Cc: ecos-discuss@ecos.sourceware.org
> Oggetto: Re: [ECOS] Problem flashing WinCE
>
> On Fri, Mar 12, 2010 at 12:32 PM, Stefano Mora
> <smora@eos.pr.it> wrote:
> >
> >> Hello all,
> >> I'm working a board based on Freewscale iMX25.
> >> The original board has RedBoot + Linux but I need to switch to
> >> RedBoot + WinCE.
> >> I init the Flash memory to delete the Linux partition and
> create the
> >> WinCE one.
> >>
> <snip>
>
> oot> load -h 192.168.0.12 -b 0x180000 -r nk.bin
>
> <snip>
>
> >> ....
> >> RedBoot> fis load wince
> >> ... Read from 0x03e80000-0x03eff000 at 0x00100000: ..
> >> ... Read from 0x00180000-0x00e2ab6f at 0x00180000:
> >> ...........................
> >> RedBoot> go
> >> $T050f:60001800;0d:f00fe703;#87$T050f:60001800;0d:f00fe703;#87
> >> $T050f:60001800;0d:f00fe703;#87$T050f:60001800;0d:f00fe703;#87
> >> $T050f:60001800;0d:f00fe703;#87$T050f:60001800;0d:f00fe703;#87
> >> $T050f:60001800;0d:f00fe703;#87$T050f:60001800;0d:f00fe703;#87
> >> $T050f:60001800;0d:f00fe703;#87
> >> $T050f:60001800;0d:f00fe703;#87++Searching for BBT table
> in the flash
> >> ...
> >>
> >> The image doesn't start by 'go' command.
>
> <snip>
>
> >> ....
> >> ....
> >>
> >> Where is the fault? Why the iamge doesn't start?
> >>
> >> Thanks,
> >> regards
> >> ________________________________
> >>
> >> Ing. Stefano Mora
> >
> You have not told us whether your CE image runs. Can you load
> and run windows .bin files using RedBoot? Skip the reflashing
> and test that first. If that does not work try .nb0 files.
> ".bin" is not a rom image but ".nb0" is, in CE. This is how I do it.
>
> lo -r -b 0x0 nk.nb0
> go
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list