[ECOS] arm-eabi -> Interrupt vector not free

[Reg]

Hello

This error raises before ecos calls cyg_user_start. So it's in the ecos 
startup. Earlier I spent days to get my gdb working (OpenOCD, cygwin, 
windows, Atmel AT91 SAM7A3). With the tools shipped with ecos it did not 
work, but with yagarto's toolchain it did, but I'm not able to compile 
ecos with it, because configtool uses cygwin style path, and yagarto 
uses windows style pathes.
An eabi has this error :) I will give a try with arm-eabi-gdb. If it did 
not work, I would be in a hard situation :)

Thank you!
Gergely Szentirmai

Sergei Gavrikov írta:
> On Fri, Apr 10, 2009 at 11:03:10PM +0200, Szentirmai Gergely wrote:
>   
>> Hello
>>
>> Previously I used arm-elf-gcc, but any time I try to get arm-eabi alive  
>> I get this this message imidiately after reset:
>>
>> <1>intr.cxx[506]void Cyg_Interrupt::attach() Interrupt vector not free.
>> ASSERT FAIL: <1>intr.cxx            [ 506] void Cyg_Interrupt::attach() 
>>
>>  Interrupt vector not free.
>>     
>
> First, what is your target (platform) and which interrrupt number is?
>
>   
>> There is no message like this when I compile things with elf (two  
>> changes, command prefix= arm-elf-gcc, and Build for eabi = false (it is  
>> done automatically)). The ecos config, and sources are the same. There  
>> is only one main.c, which would send hello world to the diag port.  
>> (works perfectly with elf). Nothing to do with interrupts.
>>     
>
> Can you set a breakpoint on cyg_assert_fail() and cyg_interrupt_attach()
> to know a bit more about issue? What is that vector? UART, RTC? The
> assertion's report will tell you about.
>
>   
>> This message was discussed here:
>> http://ecos.sourceware.org/ml/ecos-discuss/2004-08/msg00099.html
>>
>> But my ecos source (latest from CVS) behaves like this.
>>
>> Any ideas? Maybe this magic build for eabi switch does something wrong?
>>
>>     
>
> It's not enough an information to get it.
>
> Sergei
>
>   
>> Gergely Szentirmai
>>
>> -- 
>> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>>     
>
>   

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss