[ECOS] eCos and RedBoot support for HP Ipaq

[Gary Thomas]

Jérémy Alles wrote:
> About the Ipaq model, do you mean 3600 series? Or only the 3600 model
> itself? Because I didn't find any Ipaq 3600, but other (3630, 3650...) are
> easier to find.

Sadly, only the old 3600 model (dates from around 2000)  The newer
models are also different enough that eCos doesn't run on them.

Of course, you're free to expand the coverage to these new models :-)

> -----Message d'origine-----
> De : ecos-discuss-owner@ecos.sourceware.org
> [mailto:ecos-discuss-owner@ecos.sourceware.org] De la part de Gary Thomas
> Envoyé : mercredi 5 mars 2008 12:02
> À : Jérémy Alles
> Cc : eCos Discussion
> Objet : Re: [ECOS] eCos and RedBoot support for HP Ipaq
> 
> Please keep your relies on the eCos mailing list so that all benefit.
> 
> Jérémy Alles wrote:
>> Thank you for that information. The Ipaq seems to be a good choice for me.
> 
>> In RedBoot's guide, I read that I also need a compact flash Ethernet card,
>> but there is no reference about this device? Do you know which device is
>> supported?
> 
> Socket Communications LP/E - a fairly old 10Mb PCMCIA card
> 
>> -----Message d'origine-----
>> De : Gary Thomas [mailto:gary@mlbassoc.com] 
>> Envoyé : mercredi 5 mars 2008 11:43
>> À : Jérémy Alles
>> Cc : ecos-discuss@ecos.sourceware.org
>> Objet : Re: [ECOS] eCos and RedBoot support for HP Ipaq
>>
>> Jérémy Alles wrote:
>>> Hi,
>>>
>>> I saw on eCos website that the HP Ipaq is supported by both eCos and
>>> Redboot. I would like to know if there are special requirements on the
>> Ipaq
>>> model number or if only the CPU (Strong ARM SA-1110) is important.
>> The iPAQ support only runs on the HP3600 model.  Other models are quite
>> different (in the details).
>>
>> There are other SA1100 based platforms that eCos will run on as well.
> 
> 


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss