[ECOS] jffs2 filesystem with redboot

[Gary Thomas]

Tiju Jacob wrote:
> It is a mx27 ADS based board. The redboot/eCos sources were given by Freescale.

Please keep replies on the eCos list so that all may benefit.

AFAIK, that port only supports the NOR FLASH on the board.  If you want
to add NAND, you'll need to write the drivers, etc, yourself.  There
has been much discussion on this topic of late; check the archives.

> On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <gary@mlbassoc.com> wrote:
>> Tiju Jacob wrote:
>>> Hi all,
>>>
>>> I have a freescale based development board. I am trying to boot from
>>> nand using redboot. My queries are:
>>>
>>> 1. How would I enable the nand flash in redboot?
>>> 2. How to integrate jffs2 filesystem with redboot?
>>> 3. If integrated will I be able to write, read, erase files in the nand
>>> flash?
>>> 4. How could I enable the support for these functionalities?
>>>
>> What kind of Freescale development board is it?
>> Where did you get the RedBoot/eCos sources (if not from the public CVS
>> tree)?

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss