[ECOS] Network debuggers & diag_printf
Rob Duncan
rob.duncan@designmagnitude.com
Fri Jul 4 18:19:00 GMT 2008
Eduardo,
On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote:
> BOOTP[eth0] op: REPLY
> htype: Ethernet
> hlen: 6
> hops: 0
> xid: 0x0
> secs: 0
> flags: 0x0
> hw_addr: 00:1b:eb:74:00:dd
> client IP: 192.0.2.235
> my IP: 192.0.2.235
> server IP: 192.0.110.232
> gateway IP: 192.0.110.232
> options:
> subnet mask: 255.255.0.0
> IP broadcast: 192.0.255.255
> gateway: 192.0.110.232
>
> These lines are printed using diag_printf () in module bootp_support.c,
> function show_bootp(). Instead of commenting the code I would like to know
> if there is a way to disable the diag_printf () function, at least for the
> code related to the network settings.
Try setting the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW option to 0.
Rob.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list