[ECOS] at91Arm7sek running without the pll
Tobias Nielsen
tobibobi@gmail.com
Mon Feb 25 16:27:00 GMT 2008
Oki, i will try to work with it a bit then... - thx
2008/2/25, Andrew Lunn <andrew@lunn.ch>:
> On Mon, Feb 25, 2008 at 05:05:38PM +0100, Tobias Nielsen wrote:
> > Nope, i have a situation where the the external components to drive
> > the PLL is not connected - therefore i have to run without the PLL
> >
> > 2008/2/25, Andrew Lunn <andrew@lunn.ch>:
> > > On Mon, Feb 25, 2008 at 03:47:26PM +0100, Tobias Nielsen wrote:
> > > > I have been sitting for some time to try to figure out a way to
> > > > completely skip the PLL AND at the same time use the main oscillator
> > > > bypass feature. I can see that the usage of the PLL is more or less
> > > > directly coded in to a macro in the header:
> > > >
> > > > hal/arm/at91/at91sam7s/current/include/hal_platform_setup.h
> > > >
> > > > But if i want to completely bypass that feature and follow the
> > > > instructions in the datasheet that states OSCBYPASS should be set to 1
> > > > and MOSCEN must be set 0 - i have absolutely no idea on how to put
> > > > that functionality in to the system without hacking a lot of code that
> > > > i in principle have no knowledge about...
> > > >
> > > > Do anyone know how to make that bypass?
> > >
> > >
> > > It will be a little bit messy.
> > >
> > > Why do you need to turn the PLL off? Can you live with the PLL simply
> > > multiplying by 1 and dividing by 1?
>
>
> Then i suggest you add CDL control of this. A new option say
>
> CYGBLD_HAL_ARM_AT91_PLL_BYPASS
>
> So that CYGNUM_HAL_ARM_AT91_CLOCK_SPEED is calculated correctly, you
> want some requires statements in the CYGBLD_HAL_ARM_AT91_PLL_BYPASS
> option. Something like
>
> cdl_option CYGBLD_HAL_ARM_AT91_PLL_BYPASS {
> display "Bypass the PLL"
> flavor bool
> default_value 0
>
> requires CYGNUM_HAL_ARM_AT91_PLL_MULTIPLIER == 2
> requires CYGNUM_HAL_ARM_AT91_PLL_DIVIDER == 1
>
> description "
> The PLL requires external components which not all targets have.
> Enabling this option bypasses the PLL."
> }
>
> Then in hal_platform_setup.h add the necassary code inside #ifdefs.
>
>
> Andrew
>
--
Yours kindly
Tobias Nielsen
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list