[ECOS] Redboot
Syed Ismail
ismail.riyaz@dyansys.com
Mon Nov 12 11:31:00 GMT 2007
On Mon, 12 Nov 2007 Andrew Lunn wrote :
> On Mon, Nov 12, 2007 at 08:38:52AM -0000, Syed Ismail
> wrote:
> >
> > Hi
> > When i run redboot on my custom board, i get the
> following message.
> >
> > **Warning** FLASH configuration checksum error or
> invalid key
> > Use 'fconfig -i' to [re]initialize database
> >
> > fis list gives this
> > Name FLASH addr Mem addr Length
> Entry point
> > ReReoooococoigig 0xF000F000 0xF000F000 0x10001000
> 0x00000000
> >
> >
> > What could be the issue. Could it be flash device
> incompatibility. Please help.
>
> Did you notice that Redboot says this:
>
> Use 'fconfig -i' to [re]initialize database
>
> What happens when you do this?
>
> You may also want to try
>
> fis init
>
> The RedBoot manual is:
>
> http://ecos.sourceware.org/docs-latest/redboot/redboot-g-
> uide.html
>
> Andrew
Hi
I found that redboot configuration does not get written into flash properly. So, the checksum error. For example, config key1 0BADFACE gets written as FACEFACE. Where could be the issue.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list