[ECOS] Redboot initialize database error

Tales Toledo toledo.tales@gmail.com
Wed Jun 27 22:43:00 GMT 2007


Hi,

seems that fconfig commands doesn't write the configuration variables
to database (bootp false in particular). As you can see in the
following lines after reset the database comes to initial state (bootp
= true).

I check the list but I didn't find a similar case.

Does anybody have a similar problem?

-----------------------------------------------------

**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database
** FEC Info: PHY LINK already UP
... waiting for BOOTP information
Ethernet eth0: MAC address 7c:71:43:a6:7c:92
Can't get BOOTP info for device!

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007

Platform: MPC880 (PowerPC 880)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited

RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0x407f0000-0x40800000: .
... Program from 0x01ff0000-0x02000000 at 0x407f0000: .
RedBoot> fconfig -l -n
boot_script: false
bootp: true
bootp_server_ip: 0.0.0.0
dns_domain: <Not a string: 0x1FE32F5>
dns_ip: 0.0.0.0
fec_esa: 0x7C:0x71:0x43:0xA6:0x7C:0x92
gdb_port: 9000
info_console_force: false
net_debug: false
RedBoot> fconfig
Run script at boot: false
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.0.100
Local IP address mask: 255.255.255.0
Default server IP address: 192.168.0.1
DNS domain name: <Not a string: 0x1FE32F5>
DNS server IP address: 192.168.0.4
Network hardware address [MAC]: 0x7C:0x71:0x43:0xA6:0x7C:0x92
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0x407f0000-0x40800000: .
... Program from 0x01ff0000-0x02000000 at 0x407f0000: .
RedBoot> fconfig -l -n
boot_script: false
bootp: false
bootp_my_gateway_ip: 0.0.0.0
bootp_my_ip: 192.168.0.100
bootp_my_ip_mask: 255.255.255.0
bootp_server_ip: 192.168.0.1
dns_domain: <Not a string: 0x1FE32F5>
dns_ip: 192.168.0.4
fec_esa: 0x7C:0x71:0x43:0xA6:0x7C:0x92
gdb_port: 9000
info_console_force: false
net_debug: false
RedBoot> reset
**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database
** FEC Info: PHY LINK already UP
... waiting for BOOTP information
Ethernet eth0: MAC address 7c:71:43:a6:7c:92
Can't get BOOTP info for device!

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 17:03:31, Jun 22 2007

Platform: MPC880 (PowerPC 880)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited

RAM: 0x00000000-0x02000000, [0x0001b040-0x01fe1000] available
FLASH: 0x40000000 - 0x40800000, 128 blocks of 0x00010000 bytes each.
RedBoot>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list