[ECOS] How to enable diag_printf at Redboot

[Tales Toledo]

On 7/10/07, Sergei Gavrikov <w3sg@softhome.net> wrote:
> Execuse me a double post, I have a doubts about e-mail delivery.
>
> On Tue, Jul 10, 2007 at 04:23:59PM -0300, Tales Toledo wrote:
> > On 7/9/07, Sergei Gavrikov <w3sg@softhome.net> wrote:
> > >I again did review your previous RedBoot dumps. You known/sure that is
> > >1) RAM copy of `fconfig' is correct, 2) Written flash copy of `fconfig'
> > >seems or is correct too, there are a valid human readable chunks at the
> > >least,
> >
> > Just checking ... 1) and 2) Ok. You can see as follow
> > RedBoot> fconfig -i
> > Initialize non-volatile configuration - continue (y/n)? y
> > Run script at boot: false
> > Use BOOTP for network configuration: false
> > Gateway IP address: 192.168.1.1
> > Local IP address: 192.168.1.100
> > Local IP address mask: 255.255.255.0
> > Default server IP address: 192.168.1.1
> > DNS domain name: <Not a string: 0x1FE32F5>
> > DNS server IP address: 192.168.1.1
> > Network hardware address [MAC]: 0x7C:0x71:0x43:0xA6:0x7C:0x92
> > GDB connection port: 9000
> > Force console for special debug messages: false
> > Network debug at boot time: false
> > Update RedBoot non-volatile configuration - continue (y/n)? y
> > ... Erase from 0x407d0000-0x407d1000: .
> > ... Program from 0x01fe3000-0x01fe4000 at 0x407d0000: .
> > RedBoot> ck
> > RedBoot> cksum
> > usage: cksum -b <addr> -l <length>
> > RedBoot> cksum -b 0x01fe3000 -l 0x1000
> > POSIX cksum = 2836439824 4096 (0xa910a310 0x00001000)
> > RedBoot> cksum -b 0x407d0000 -l 0x1000
> > POSIX cksum = 2836439824 4096 (0xa910a310 0x00001000)
> > RedBoot>
> >
> > >3) you don't see the BAD magic values in your dumps (0x0BADFACE
> > >or 0xDEADDEAD).
> >
> > RedBoot> dump -b 0x407d0000 -l 0x1000
> > 407D0000: 00 00 10 00 0B AD FA CE  01 0C 01 00 62 6F 6F 74
> > |............boot|
> > 407D0010: 5F 73 63 72 69 70 74 00  00 00 00 00 04 11 01 0C
> > |_script.........|
> > 407D0020: 62 6F 6F 74 5F 73 63 72  69 70 74 5F 64 61 74 61
> > |boot_script_data|
> > 407D0030: 00 62 6F 6F 74 5F 73 63  72 69 70 74 00 00 00 00
> > |.boot_script....|
> >
> > I can see 0x0BADFACE... I miss this point, what is wrong with that?
>
> It seems I thought itself :-), you have to see both those keys, because
> the RedBoot config is (flash_config.h)
>
> struct _config {
>     unsigned long len;
>     unsigned long key1;
>     unsigned char config_data[MAX_CONFIG_DATA-(4*4)];
>     unsigned long key2;
>     unsigned long cksum;
> };
>
> I did try to say what that point checks just 3 things: CRC, KEY1
> (0x0BADFACE) and KEY2 (0xDEADDEAD):
>
>     if ((flash_crc(config) != config->cksum) ||
>         (config->key1 != CONFIG_KEY1)|| (config->key2 != CONFIG_KEY2)) {
>         diag_printf("**Warning** FLASH configuration checksum error or invalid key\n");
>         diag_printf("Use 'fconfig -i' to [re]initialize database\n");
>         config_init();
>         return;
>     }
>

This is my printf result just before the if test
config->key1 = 0xbadface, config->key2 = 0xffffffff, config->cksum =
0xffffffff, flash_crc = 0x706de31e

As you see I don't get config->key2 and config->cksum with the right values.

> Check what that KEY2/CRC is present at the end of 4K area.

I can't find it. I don´t have any KEY2 at 4K area.

>You believe that CRC is okay. So, this is the last point. Try to
build a minimalist
> RedBoot, i.e.  which supports serial and Flash devices only. That
> reduces a size of RedBoot and rebuild-time. That will be to have a few
> config options. I wonder it's possible 'fconfig' issue won't be occur...
> So, try to remove NET stuff from RedBoot:

After investigate more and more I think I have a problem with sectors
configuration in flash. I read am29xxxxx_parts.inl and the support for
the part number I have in my board (S29GL064MR3) doesn't look fine.
The sectors seems to be wrong since it is just TOP boot and not
top/bottom as described there. I will try to do some changes tomorrow.

>
> ecosconfig new <your target> redboot
> ecosconfig import <your ecm file>
> ecoscongig remove CYGPKG_DEVS_ETH_POWERPC_FEC
> ...
> ecosconfig resolve
> make
>
> Well, I don't know your target stuff, so, look on top your own ecos.ecc
> file to know which NET* related packages (Eth I/O drivers, DNS client,
> etc.) you can remove, and try to build such a minimal RedBoot image.
>
> Will you get 'fconfig' warning with the minimalist RedBoot? If you
> will... I have no more ideas, sorry :-(.
>
I hope don't get at this point ;-)
>
>   Sergei
>
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss